How To Detail A Boat | 7 Steps To Boat Detailing | Revival Marine Care

Learn How To Detail A Boat Like A Pro. In this video I’ll teach you How To Detail A Boat Like A Pro! This is ideal for boat owners, captains and detailers. Products Below 👇
💰💰 Save 15% On ALL Shine Supply Marine Products & MaxShine Products with our discount code ( DRAKE15 ) at checkout. 💰💰
💻 www.shinesupplymarine.com
💻 maxshineusa.com/shop/
📸 Follow Drake On Instagram
For Daily Tips and Tricks drakes.detailing
Book A Boat Detail With Drake!
👉 Revival Marine Care
💻 www.revivalmarinecare.com
📞 [phone]
📍 Pensacola, FL
Initial Wash:
👉 Ryobi Pressure Washer: amzn.to/3MKJUbL
👉 MTM Hydro Easy Hold: www.detailedimage.com/wax.php?id=94879&url=detailedimage.com/DI-Accessories-M12/MTM-Hydro-Easy-Hold-SGS28-Spray-Gun-P2473/
👉 Foam Cannon ( DRAKE15 @ Checkout ) : maxshineusa.com/product/car-wash-foam-cannon/
👉 Dawn Dish Soap: amzn.to/49yF9fb
👉 Wash Mitt ( DRAKE15 @ Checkout ) : maxshineusa.com/product/microfiber-wash-mitts/
Buffing Steps :
Step 1: Cut
👉 Heavy Cut ( DRAKE15 @ Checkout ) : shinesupply.com/collections/marine-products/products/heavy-cut
👉 White Wool Pad ( DRAKE15 @ Checkout ) : shinesupply.com/collections/marine-products/products/buff-and-shine-white-single-side-heavy-cut-wool-pad-8-x-1-25
Step 2: Medium Cut
👉 Chop Top ( DRAKE15 @ Checkout ) : shinesupply.com/collections/marine-products/products/chop-top-32oz
👉 Yellow Wool ( DRAKE15 @ Checkout ) : shinesupply.com/collections/marine-products/products/buff-and-shine-yellow-single-side-medium-cut-wool-pad-8-x-1-25
Step 3: Polish
👉Chop Top ( DRAKE15 @ Checkout ) : shinesupply.com/collections/marine-products/products/chop-top-32oz
👉 Wake Up Ceramic Polish ( DRAKE15 @ Checkout ) : shinesupply.com/collections/marine-products/products/wake-up-326oz
👉Orange Lake County CCS Foam Pad ( DRAKE15 @ Checkout ) : shinesupply.com/collections/marine-products/products/lake-country-ccs-polishing-pad
Step4: Wax
👉Jescar Powerlock: amzn.to/3MJzAkb
👉White Lake County CCS Foam Pad ( DRAKE15 @ Checkout ) : shinesupply.com/collections/marine-products/products/lake-country-ccs-polishing-pad
Cleaners:
👉 WSP water spot remover: getundrdog.com/products/water-spot-remover
👉 Aftermath ( DRAKE15 @ Checkout ) : shinesupply.com/collections/marine-products/products/aftermath-32oz-w-white-sprayer
👉 SuperClean: amzn.to/323A2Fx
👉 303 Vinyl Protectant: www.amazon.com/303-Matte-Finish-Plastic-Protectant/dp/B000XBCURW/ref=sr_1_7?crid=1JEQ4JTZ5B1UE&keywords=303&qid=1699990051&sprefix=303%2Caps%2C120&sr=8-7
Machines:
👉 Makita Rotary amzn.to/37iJszK
👉 MaxShine M8sv2 ( DRAKE15 @ Checkout ) maxshineusa.com/store/p/product/maxshine-m8s-dual-action-polisher-900w
👉 Maxshine Mini Cordless Polisher: ( DRAKE15 @ Checkout ) maxshineusa.com/product/cordless-dual-action-polisher/
👉 Maxshine 21mm Throw DA ( DRAKE15 @ Checkout ) maxshineusa.com/product/random-orbital-polisher/
Boat Maintenance Products:
👉 Shift Soap ( DRAKE15 @ Checkout ) : shinesupply.com/products/shift-soap-16oz?_pos=2&_sid=7d326648c&_ss=r
👉 Aftermath ( DRAKE15 @ Checkout ) : shinesupply.com/collections/marine-products/products/aftermath-32oz-w-white-sprayer
👉 XL Drying Towels ( DRAKE15 @ Checkout ) : maxshineusa.com/product/extra-soft-towels/
👉 Wash Mitts ( DRAKE15 @ Checkout ) : maxshineusa.com/p.category/mitt-wash/car-wash-mitt/
👉 X Soft Boat Brush: amzn.to/3SIyp8u
👉 Wash Pole: amzn.to/46cvxE8
Camera Gear:
- Gopro 9 Used in This Video! amzn.to/39I3wdJ
- Camera Used in All My Videos! amzn.to/2WitD3b
- Microphone Used in All My Videos! amzn.to/37jYAu2
👉 Save 15% On ALL Shine Supply Marine Products & MaxShine Products
with our discount code ( DRAKE15 ) at checkout.
💻 www.shinesupplymarine.com
💻 maxshineusa.com/shop/
👉 As an Amazon Associate I earn from qualifying purchases.
DISCLAIMERS:
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

[@KateySmithMusic]

This was really helpful! I do car detailing in Maine, and one of my regulars asked if I could do their boat. I wasn’t sure how different the process would be!

[@787Yeiii]

Me right now lol

[@anthonyclarke9158]

Same!

[@christianalexzander1338]

Same!

[@austindensmore924]

same

[@jayjaycaracas413]

Me too lol

[@joseibarra2985]

Dude you're a lifesaver I'm starting a new job as a boat detailer with no experience but they want to teach me and give me a shot. So this is the first video of many I will watch to prepare myself as much as I can with the limited resources I have before my first day. Wish me luck peeps!

[@DrakesDetailing]

That’s awesome bro! So glad I could help!! 💯

[@Evadingmoto]

How is going now a year later

[@joseibarra2985]

@chillcolorado8039 pretty good detail wise, honestly they said I'm the best they've had in a long time. I'm actually a marine technician apprentice now because of my detail work ethic 😊

[@Evadingmoto]

@@joseibarra2985 nice!

[@lilcowboydoggo5798]

​@@joseibarra2985 bro imma start soon cleaning boats too!! How did it go in the beginning

[@dianeandbentleymcdonough3367]

I clean houses and I was asked to detail a boat. This looks like a great teaching tool for me to start with. Thank you

[@DrakesDetailing]

Glad it was helpful!😎

[@jkwellness1639]

You are the king of detailing . Your videos helper me improve so much I'm onto boat detailing and feeling confident. In 2 years I built a word of mouth side hustle 35k to 45k a year doing automotive detailing fant wait to pursue this. Thanks for th3 knowledge, inspiration and motivation.

[@DrakesDetailing]

You’re welcome! Thanks for the comment!

[@Ripjaw57]

Mannn I watched a video before this that literally just wasted 20 mins of my life... I just wanted to see how it’s done and this was it! I don’t usually do the subscription thing but heck... you deserve it. Thank you for this short, detailed golden nugget...

[@DrakesDetailing]

Thanks man!!! Ha

[@robbroyles2544]

Finally! somebody simplifies boat detailing! much appreciated

[@DrakesDetailing]

Thanks for watching!

[@MBicknell]

Thats because this isnt boat detailing. This is boat washing and waxing

[@dmoogles]

THANK YOU for this video!! I work at a boat repair shop and have discovered that I really enjoy washing/detailing boats so I am considering starting my own boat detailing business. I came to KZbin to do a little research about the business and you nailed it with this video! This is exactly what I was looking for! 👍🏼👍🏼😁

[@DrakesDetailing]

Awesome! Thanks for watching!

[@lucaswallace9885]

Tell me how’s it gone and did you do it?

[@decschannel1000]

I did automotive detailing for 2 1/2 years and just got a job as a boat detailer, this video was awesome for a quick idea of what I’m getting into. Thank you !

[@DrakesDetailing]

Awesome! Thanks for watching!

[@jayjudy]

Woahhhh me too lol😅

[@scottsmo7715]

Fellow Pensacola transplant here !!! Originally from Chicago. Love the Gulf Coast !!! Thanks for the videos. Learning allot

[@DrakesDetailing]

Awesome! Thank you for watching!

[@andreaheckler56]

These videos are great. II’ve learned so much as a new boat owner.

[@DrakesDetailing]

Sweet!! 😎👍🏻🔥

[@Lilripper850]

So excited for this channel. I’ve been detailing boats for years but just got in to sanding last year and have so many questions. But usually no one to ask. You should try one of these bonnets to remove the wax they work really well. Of course you have to go over with a towel later but you get up 90% of it with the machine.

[@Lilripper850]

Shurhold 3153 Microfiber Bonnet www.amazon.com/dp/B007ED9YSU/ref=cm_sw_r_cp_api_i_W7LLEbMMNZ7ZD

[@DrakesDetailing]

Thanks!! I'll Give them a look! I typically Just do it by hand, Been doing it for years! Easy and simple!

[@gotthyme]

Semi retired Nurse (tired of Healthcare) doing my first job next week. Will see if my back can handle it, but I Love making things look new again!!! Thanks for these videos.

[@DrakesDetailing]

Good luck! I’m sure it’ll turn out 🔥🔥

[@sethmadison5977]

I do this everyday lol I work for a marine services place I love it!

[@DrakesDetailing]

Nice! 😎👍🏻

[@davidfishferrell]

Dude is good! I’ve learned a lot! Thanks bro

[@DrakesDetailing]

Thank you! I appreciate you for watching!

[@mobiledetail4you]

Nice vid. Only suggestion is do floors first. Purple power after wax is not good... also you can Woody wax those floors after ...

[@DrakesDetailing]

Thank you for the feedback! I agree with you that the floors should be done before the wax, But we always seem to get them dirty again even with shoe nets, So I am very careful not to get the purple power on the freshly waxed surface, and if I do I spray it off. I had someone else ask me the same question

[@ITUMBLE4U]

Thanks for sharing your knowledge. I'm a little surprised you don't treat the floor after the final clean. I think Woody wax even makes a non-slip floor wax that will help with clean up after a day of fishing. Thanks again...will definitely try the purple power.

[@GameOver321]

Great 👍🏽 video. I will be trying these steps on my "new" 96 sea ray lol

[@DrakesDetailing]

Nice! Glad I could help! 😎

[@fatherof3bigbankhankworkha392]

Thanks for the game bro. Throwing this in the arsenal. 💯

[@DrakesDetailing]

Awesome, glad I could help! 😎

[@captaina4458]

My neighbor owns a Automotive shop in Kailua, HI. He recently worked on my truck and didn’t charge me because he wants me to detail his boat. 😁. I also own a detailing business so it works out as a trade.

[@DrakesDetailing]

That is awesome!

[@martinlandaverde403]

Great video,thanks for taking the time.as a mobile Detailer I’m done some boats and is always fun,keep up the good work,KEEP REFLECTING.

[@DrakesDetailing]

Thank you!

[@theheatison9604]

Yes sir!!!,purple power and magic eraser best friend

[@steve2718]

Used the jescar sealant today…. Immaculate!!!!

[@DrakesDetailing]

Awesome 😎

[@eddiesboatdetailz6970]

This was very helpful because I am from Lake Havasu City Arizona, and I work on really expensive Boats.

[@DrakesDetailing]

Glad I could help 😎

[@TanManFixes]

if there is any dullness in the gel coat, you have to use a regular rotary buffer, and a wool pad. Also marine oxidation remover. Most boats I deal with need oxidation correction.

[@DrakesDetailing]

💯💯💯

[@smoothimagedetailing7072]

Thanks for the magic eraser tip!

[@DrakesDetailing]

You bet!

[@vincentbriggs1845]

Great video,simple n straight to the point

[@DrakesDetailing]

Thanks for watching!

[@fishingculture9125]

Dude i watch all of your videos for real and they haved help me AAA BUNCH!

[@DrakesDetailing]

Killer!! Glad I could help! Ha

[@good2know606]

That video was Legit, I love detailing my boat, cars, trucks and toys. You do an excellent job. Keep up the good work. I'm watching all the videos and subscribed. I'm going to try those 3 products after the 4th of July weekend on my boat. Keep up the hard and good work.

[@DrakesDetailing]

Awesome! Thanks for watching !

[@ozziehernandez285]

Drake awesome video-full of solid gold. Thank you!

[@DrakesDetailing]

You’re welcome!

[@linty5998]

Bouta move to Texas around Lake Austin and Lake Travis for an apprenticeship, doing detailing on the side for my real money maker. This is super helpful gonna watch whatever else you upload.

[@davidkuperschmid5274]

How can I not subscribe to a channel where a guy works that hard?

[@StephenAlexanderVideos]

Great video I’m trying to start my own business and this was really informative compared to every other video I’ve seen. Subscribed

[@DrakesDetailing]

Thanks bro!! I’m down to help you anyway I can!

[@DrakesDetailing]

Let me know of some topics you need help on and I’ll try to get a video on it!

[@alejandrocorral9779]

Same here trying to start a business how much would u normally charge for or can u do a video on how u price things

[@DrakesDetailing]

I’ll have that coming up here in a week or 2! I’m going todo a whole series on starting and manage the business side of detailing!

[@StephenAlexanderVideos]

@@DrakesDetailing Can you make a video on essentials you need to start the service? Like must have

[@cupajoe11]

You make it look so easy!

[@JBogle69]

great video. i currently am a marine detailer at hagadone marine center in cda idaho. def want to try out that woody wax! when i prep my boats i pressure wash the whole inside get my floors clean then do the outside come back to the inside work top to bottom so i dont have to re go over any of my work. i only like to do it once haha then a vac from bow to stern on my way out after setting the carpets.

[@DrakesDetailing]

Awesome bro!! Everyone has their own system! Stick to what works for you!

[@miketramuto2415]

Just got a detailing job! Thank you so much

[@DrakesDetailing]

Awesome! goodluck!

[@miketramuto2415]

@@DrakesDetailing much appreciated! Possible to do a video on starting your own detailing business? What you need to start?

[@ericbuckley4971]

He has done such a good job , I want him to do my boat , do you work on the Sunshine Coast,

[@alexbarbosa6031]

Hello drake been watching many of your videos just love it you are the real deal, quick question can you do a video on the process of cleaning a seadek , keep up the good work 👍

[@bido8176]

Watch those magic erasers on highly polished gel coat. I used them once and found they dulled the gelcoat.

[@DrakesDetailing]

👍🏻

[@beaulster]

Damn dude. Well done.

[@DrakesDetailing]

Thank you!!

[@graceramadan3181]

Excellent simplified work sir!

[@DrakesDetailing]

Thank you for watching!

[@AaronCeee]

Thank you bro! I got offered to detail a boat and I only do cars lol NOT ANYMORE 🎉😂

[@DrakesDetailing]

Glad I could help! 🔥🔥💯

[@mikehamm648]

The best video I have seen ever on how to detail like a pro! Good on ya!

[@DrakesDetailing]

Awesome! thank you!

[@twinsnails4983]

That Finn is nice with some Mercury‘s on the back

[@DrakesDetailing]

Heck ya it is!! 🔥🔥

[@Franklinrosevelt]

Great video Drake! Do you detail inboard wakeboating boats? Would love to see a video on a Supra/Malibu/Natique/etc. type boats with more delicate interiors. Thanks and great job on these videos and products!

[@DrakesDetailing]

I don’t do a ton of wake boats! I have maybe only done 4 in 7 years ha The last one I did was a super air natique. We coated it

[@DrakesDetailing]

On the gulf coast it’s all fishing boats

[@deliverybryan1138]

I’m a greenhorn when it comes to boat detailing . And I wanna became a much better boat detailer , so I can get boats out in a timely manner !

[@DrakesDetailing]

That’s cool bro! Watch my channel you’ll be able to learn more! Biggest thing is to develop a system that works for you! You’ll get better with time and lots of practice!

[@deliverybryan1138]

I work in the Cabela’s boat center as a boat detailing person .

[@DrakesDetailing]

Nice! So you deal with brand new boats?

[@deliverybryan1138]

Yes sir . And those brand new boats can also be in horrible shape . Cause they sit near the trees 🌲

[@DrakesDetailing]

Yep! Biggest them is to keep them waxed / sealed up! That way tree stuff will wash off easy

[@jamesclark7333]

Great vid, just picked up some products from your links. Any suggestions on product to deal with cleaning up a vinyl wrap? I just got center console with a black vinyl wrap and it’s got water spots and minor scratches. Any suggestions on products for that?

[@DrakesDetailing]

You can polish is lightly with menzerna 2500 on a black foam force lake country pad. Just seal it with jescar power lock after using another black for pad

[@Eastern67]

Well done for a beautiful boat ..Thanks for sharing

[@slobo5568]

Great work dude!! I own a mobile detailing business and am going to do my first boat. This helped a lot thanks

[@DrakesDetailing]

Thanks bro! If you would like to expand your boat detail knowledge I have this great online live recorded boat detailing training course available for purchase! You can take it at your own pace😎. Feel free to check it out! Here’s the link for it: www.detailuni.com/a/2147504321/GMGkUUpS

[@jlg23us]

Magic eraser is actually abrasive. Have you found any long-term issues using it?

[@DrakesDetailing]

No, but I also am smart about using it. I just use it for the light agitation of the seats. I don’t sit there and grind with it per minute on end. That’s where you can do some real damage- I also don’t use them seats all the time which helps the longevity. Another important part is making sure you rehydrate the seat afterwards with some good protectant so that they don’t dry and crack

[@marcusbrown2104]

Great job man excellent

[@DrakesDetailing]

Thank you!

[@billytolar1849]

Awesome Drake, your videos are a awesome and very informative. Went and got most of your supplies to keep our Scout looking amazing. Quick question, on the Non-Skid floor could I add sealant to help keep from staining and a tuff wash down after returning from a day on the water? What would be your suggestion? Thanks a lot!!!

[@DrakesDetailing]

yes you can use the jescar power lock on the non skid! top it with mckees 37 hydro pearl!

[@seanwilliam534]

Love the videos. Why do you prefer using the Griots Garage DA over the FLEX for this?

[@DrakesDetailing]

Easier to handle one handed

[@jeffhenderson3318]

Drake, binge watched your channel. Thought as a “Lakelander” and growing up with at least a Gheenoe since I was 14, I KNEW EVERYTHING ABOUT BOATS. Turns out I’m an idiot. (Grades at LHS and Florida Southern should’ve been my first indicator) Here’s my issue. A Waverunner with gray seat cushion. (2008) Out of nowhere developed a speckled black mold. Tried the usual cleaning solutions, mold sprays, even the “30 Second” mold spray that works like a charm on the house. I’m curious if you’ve run into this issue. And if so, will you help out a Floridian exiled to central Georgia?

[@DrakesDetailing]

Hey bro! Thanks for watching! I’d try purple power with a magic eraser. Lately at the seat with the eraser in the purple power.

[@johnsaavedra9828]

Love the videos to start. Thank you for putting in the time to share! I'm a bit confused about something. You seal/protect the deck area, wipe it down and then you clean the floors? With a degreaser which potentially breaks down the sealant you just applied? Not hating on you. On the contrary. I've been detailing for about 10 years and now soon, I'll be taking on a few boats which I've only done a couple of quick washes on. I'm using your videos as my knowledge base. But that washing the floor after protection didn't make sense to me. Am I missing something here? Thanks again! Keep glossin'

[@DrakesDetailing]

So On this job, I didn’t apply any sealant to the floors. That’s probably were the confusion is, the customer didn’t want me todo anything on the flooring besides clean it. It’s a fishing boat and they use heavy deck brushes to clean... I did apply sealant to the non skid on the tow rail, but I did not do the floors. If I would have been doing the floors, you would clean with degreaser, dry it , then apply sealant.

[@johnsaavedra9828]

@@DrakesDetailing I appreciate the response. Just gave you a follow on Instagram today! @after_image_detailing Keep the vids coming!

[@DrakesDetailing]

Thanks bro!

[@dependentandfree560]

New subscriber! Thanks for the great boat detailing info!

[@DrakesDetailing]

You’re welcome! Thanks for the Sub!

[@donnaknowles9292]

Great site for DYS. I HAVE A ROBLEM how do you get at the front of the bridge on a Sea Ray 380 AC to buffer, polish and

[@DrakesDetailing]

You’ll need suction cups or a rope and harness. Watch my video on how to buff the brow

[@andrewgibb8846]

Fantastic deep cleaning, that is a lot of surface area to clean. Would you say that boat detailing can be more lucrative than automotive cleaning? Thank you for sharing 👍✌🏼

[@DrakesDetailing]

Hey bro! Absolutely! It’s a whole different ball game.

[@dontridedirtydrd2282]

Very nice

[@DrakesDetailing]

Thanks!!

[@jefferykirk2322]

You a great job and can't wait to see more 😊.

[@DrakesDetailing]

Thanks, ha! More content coming at you soon 😎

[@jefferykirk2322]

@@DrakesDetailing hay loved the job you did on that potoon but can't find that finishing kit you where talking about ?

[@markhaney4511]

What were the products that you recommended in the video? Can you list them? Thanks!

[@DrakesDetailing]

I have them all listed in the description

[@msawyer3344]

Great videos! Thanks. Quick question...what steps do you suggest for a brand new boat prior to launching?

[@DrakesDetailing]

Pretty much what I did in this video! Or applying ceramic coating drakesmarinedetailsupply.com/collections/starke-surface-technology/products/liquid-thor-nano-ceramic-marine-coating

[@lbowsk]

Insert the garboard drain plug. Tie a line to the boat and have someone on the ramp hold the other end. Or, tie it off.

[@glenthomasrealtor6223]

Great process. What Purple Power do you use?

[@DrakesDetailing]

It’s a brand name cleaner, it can be found at Walmart, Home Depot, ace hardware, etc.

[@AbbyS.Pumpkins]

Nice work!

[@DrakesDetailing]

Thanks!

[@jameshuggins7320]

Well done, sir. Thanks

[@DrakesDetailing]

Thanks!!

[@gettingbendyfishing981]

Great job and killer information. I've been non-stop watching your videos for about a week now and I'm loving getting all the information, I do have a question that is probably redundant but my question is you washed waxed everything on the boat inside now and then you clean the floor after you wax the inside so what do you do when you're spraying it off you just rehand dry everything and you can hand dry the wax already too? I'm sure it's probably a stupid question but just want to be clear. Also when you're doing a wash and wax on a boat's on a trailer do you wax from the water line down underneath the boat as well or you just go to the water line and then just clean underneath the water line?

[@congacrazy29]

I understand that thier are some detailers out there that assume they know everything you need to know because they simply have a KZbin channel..but I wish I could show you a truly filthy.."light a match and burn it" type of boat detail and have it look near as new as new can be..many boats come with ware n tare and it would be unrealistic to assume a detailer is going to wave a magic wand and fix damage parts and aesthetics that demand attention from other fabricators or boat specialists..We specialize in the care and look of any automobile..boat..motorcycle or airplane..doesn't matter..Quality..discipline..ethics and performance are key..I respect your business and the fact that your a detailer..because Detailing is NOT for sissies..PERIOD!..But I also have to be brutally honest and tell you that this video does show steps and how to's but when it comes to an absolutely dreadful boat that's brought back to a pearl..this DOES NOT show that..if youd like to see some REAL filthy boats and the after photos..or just simply see the work we do..thier are thousands of BEFORE & AFTER photos..from oxidation removal..engine detail..headlight restoration..Motorcycles..RV's..SUV's..Off road vehicles..boats..paint touch up..interior blast outside to paint correction and Pearl upon PEARL results..go Facebook and type in ALL PLATINUM MOBILE DETAILING..If anything..this vid inspires me to create my own channel and show some REAL grind! Dont get me wrong..we too do boats that simply need nothing more then a wash and wax..but I have yet to see ANYONE do a totally FUC$#D Boat and bring it back to a PEARL..if you wanna see what it looks like..you know where to go! Thanks!😊😉

[@DrakesDetailing]

Awesome! Good luck bro!

[@NickVetter]

One thing I learned from detailing is work smarter not harder. Get higher end customers and boats and set them up on maintenance schedule.

[@YZFMANIAC08]

Looks immaculate

[@DrakesDetailing]

😎🔥🔥

[@tracynelson5465]

Great job

[@LNMD93]

Great video. Quick question,,,can I wash the entire boat and then apply the Jascar a different day....it's out of stock for 2 days but I need to at least use the purple power and to wash the boat on the outside today.

[@DrakesDetailing]

Absolutely!

[@gregnorbert2858]

What are the best options for removing scratches from a cowling and polishing a cowling? Thanks!

[@DrakesDetailing]

You can use a medium cut compound like starke elevate with a wool pad on a rotary. Follow up with a foam pad to remover swirls

[@spencerclark8734]

GREAT video! I'm subbed...quick question, you actually used the DA and applied the synthetic sealant on the textured non-slip part on top of the gunnels? Also do you ever apply the synthetic sealant directly on the textured floor of the boat?

[@DrakesDetailing]

yes! This customer didn't want that service, but yes after you wash the non skid, dry it and seal it up!

[@MD-eo2wy]

Could you do a video on detailing startup business steps? Whats the average you can make in a week?

[@DrakesDetailing]

Sure! I’ll see if I can get something out like that here in the new few weeks!

[@Burritosarebetterthantacos]

I know a guy who lives near our marina in KY and he details houseboats in the spring and early summer then lives the rest of the year in the tropics. He makes 100k a year doing that. A houseboat is big money. FYI. I should add....hes not detailing in the tropics he is relaxing.

[@DrakesDetailing]

🔥🔥🔥😎

[@nickarnold6474]

Yeah about 30 foot a nice price I'd charge 20 but I live in Biloxi Mississippi economy's a little different so that's right on par

[@DrakesDetailing]

💯💯

[@DrakesDetailing]

💯💯

[@jasonjenangler]

Great videos. Anyway to get the water spots off my simrad screen? Can you put the woody wax on the screen? Thanks

[@DrakesDetailing]

Ima be honest, haven’t had much luck getting heavy water marks off screens... most of the time, a light polish will do it, but it will take the factory coating off the screen... you’ll have to re ceramic coat it, or keep it waxed often. And yes, you can put woody wax on all screens and gauges

[@jasonjenangler]

Drake's Detailing thanks keep up the good work. Your videos and links are the most helpful thing I have come across. 👍🏻

[@DrakesDetailing]

Thank you!! I have a lot more coming! If you want daily tips and tricks follow me on Instagram @drakes.detailing

[@ozarkbagger1380]

How much do you charge for this level on a boat this size generally?

[@jimmymcdaniel979]

I’m curious also

[@DrakesDetailing]

Around $30 a ft

[@aaronzakkrose]

GREAT videos! Can't thank you enough! I'm just maintaining my own Whaler and am curious how you'd clean and protect the black rub rail. Is it OK to hit it with the machine pads? Or should I tape off? - Also, you mention not using Salt Away, which has been the go-to out here on the Oregon coast. What about engine flushing? Straight water? Thank you, and all the best!

[@DrakesDetailing]

Thank you! Taping the rubber would be best, to avoid more clean up for your self. I like protecting all vinyl and rubber with 303. Salt away will take your wax off unfortunately, try just waster, and alittle orpine wash and wax soap

[@harbrinn]

What is “303”

[@smeacraptor6641]

Do you use a microfiber brush for the gelcoat when doing the soap down or a soft bristle brush?

[@DrakesDetailing]

Just a soft bristle brush

[@williamdenner5179]

Great video- any advice on cleaning a bilge? My boat has twin I/Os and sits in a slip.

[@country1861]

I have a boat that has not been detailed in years. Do you recommend using the Griots Garage Machine? Will it remove the oxidation? Thanks!! Love your vids!!

[@DrakesDetailing]

No, you’ll need a makita rotary and wool pads to remove the oxidation. The griots is good or light polishing, waxing and sanding

[@jerid7866]

Great video especially for a new boat owner. What application pad did you use?

[@DrakesDetailing]

Just a black microfiber pad

[@mattsimpson4499]

This was absolutely helpful. What advice can you give someone like myself looking to start up a boat detailing and winterizing company?

[@branbran8134]

Hey Matt, just seeing this comment. Did you ever pursue the boat detailing company? Thinking of starting mine as well here in South Florida.

[@interioravenue]

Great video and insightful. Thank you!

[@DrakesDetailing]

Thank you for watching!!

[@519VXComanche]

I’ve been binging your detailing videos. Great work! I’m wondering if you can do one on detailing Imron. I don’t believe the process is the same.

[@jgsmith1624]

Have a video on cleaning a cabin cruiser?

[@DrakesDetailing]

Not yet, when I have that job come through ill put one up!

[@andrews1982]

I see you use the buff and shine microfiber with the Jescar sealant. Do you recommend this over a black foam pad because its gel coat. I'm assuming a foam pad will not work the sealant in as well and help polish the boat. Thanks and I recently subscribed yesterday and look forward to watching more videos. I'm looking to expand my auto detailing business to include boats since I'm in Florida.

[@DrakesDetailing]

You’ll make great money doing boats! I started out only doing cars now all I do are boats! The reason I use microfiber is the fact that they are very thin, it doesn’t waste a ton of product by getting soaked into the pad, that’s pretty much the only reason. You can wax with foam but use a polish pad or a med cut pad. The black foam is way to soft for gel coat.

[@clarknienhuis8246]

I cannot seem to find the link to the polisher machine you are using. Can you please provide me a link. Great work Thanks

[@DrakesDetailing]

Hey bro! Here’s the one I currently use:maxshineusa.com/product/dual-action-polisher-for-car-detailing/?gclid=Cj0KCQjwj_ajBhCqARIsAA37s0wrW_ILF_wiKYsX68KWtX_gjrab2IZXBwIQnR6TFR1Pbt9IN68ldgEaAi-NEALw_wcB Feel free to use my discount code: DRAKE15 at checkout!

[@timjacobson9321]

Nice one!!!

[@DrakesDetailing]

Thanks!

[@tommycoyle4475]

Awesome video

[@DrakesDetailing]

Thanks Bro!

[@brianharmon9900]

Hey Drake, I'm currently working on a restoration on a 2008 Robalo r260. There are a lot small rust stains embedded into the non skid deck. What do you recommend to completey remove them? I'm applying a ceramic coating to the hull and tow rail. Do you recommend applying a ceramic coating to the non skid on the floors and the lids to the compartments or applying Jescar power lock sealant instead? The robalo will be spend at least 5 months of the year in the Gulf of Mexico.

[@DrakesDetailing]

Rust aid should take the rust spots out. Ceramic coating on floors by itself will last about 3 to 5 months, but if you keep it topped off with Mckees 37 hydro pearl it will make it last a lot longer! Ceramic is usually the best option, But to coat non skid takes a lot of coating, usually takes about double the product! So make sure you budget that in. Also, What coating brand are you using?

[@clayb1832]

I’m hardcore debating on starting a scuba hull cleaning business know there is demand and have the skill set wondering what an initial capital investment would look like to secure the compressor, hoses, cleaning equipment. Have backers but am putting everything together to pitch. Would really appreciate any advice you def seem to know what’s up. Thanks

[@DrakesDetailing]

Unfortunately I don’t have any experience with that line of work, I have seen the guys out there doing it, it doesn’t look like much. Most just have a small compressor on a dolly and a few scrapers and scotch brite pads. That’s about all I can tell ya! Sorry

[@richardgibson6057]

I was wondering what your water source is? Just a hose hook up near by or do you have a water tank in your truck/van? I was thinking of adding that and then filling it with soft water that I filter before hand

[@DrakesDetailing]

In order for me to detail, I require to have the boat moved close to a shore water hook up.

[@ajbeck1258]

Hey man, I’m from Robertsdale and I am also an avid detailer. I was wondering if I could get in touch with you about maybe helping with the boats at sportsman. I’m looking to learn as much as possible.

[@DrakesDetailing]

Hey bro! Hit me up on Instagram @Drakes.Detailing

[@joshrodriguez2828]

Thanks for the videos! Had one question if you dont mind...For the purple power, are you using regular concentrate cleaner/degreaser, pressure wash concentration or the vehicle boat pressure wash? Does it matter?

[@DrakesDetailing]

It just says industrial concentrate

[@user-cx4rt2wg1v]

Does the purple power removes marine waxes?

[@DrakesDetailing]

Yes it will, don’t get it on waxed surfaces unless you want to take the wax off

[@JeffSandford]

I'm having trouble finding the buffer you referenced in the video. The link does not offer the machine in question. Can you be more specific about the manufacturer and model? Thanks!!

[@DrakesDetailing]

Hey bro! Thanks for reaching out, I’ve recently switched to the Maxshine DA! Check it out! 😎

[@alexeigorokhov]

Great video! Will be applying your technique to detail by 26ft MacGregor, this coming weekend. How much of the Jescar Power Lock would I need? Would one 16oz bottle suffice?

[@DrakesDetailing]

You should be able to seal your boat about 4 times or more with that 16 oz bottle

[@harbrinn]

We are boat owners that want to protect our investment. We’ve enjoyed your video’s....one question. I bought my husband the Flex 80 and the Flex 8-125 18.0. Do we need the Griot’s garage too? Also our bottom boat is painted black but gets white streaks in it from cleaning. What should I do to clean those up or avoid them all together?

[@DrakesDetailing]

Thanks for watching, If you have a Flex 8-125 18.0 you don't need the griots machine. as for white streaks, the best thing you can do is keep your hull waxed. that will minimize the streaks. What year is your boat? when you rub your boat, do you get a white powder or chalk on you hand?

[@karenbadgett3263]

Might be a silly question but, Do you dry the boat at the very end and if so what are you using that won’t leave marks?

[@DrakesDetailing]

Yes, use a regular shami.

[@apisaicoabati7891]

Awesome 👌

[@DrakesDetailing]

Thanks man!

[@andrews1982]

Any advice for a boat that the customer just wants washed every 2 weeks that is stored at a marina. Its on a lift at the marina over water and can't be moved. Any recommendations for a good boat wash that is safe for the water and won't remove the wax. Thank you

[@DrakesDetailing]

Yes! I like orpine wash and wax soap! Also, every few weeks use McKees 37 hydro blue Si02 spray on it, just spray it on and rinse it off then dry it, that will get it shined up and “ waxed “

[@andrews1982]

@@DrakesDetailing ok thanks. I just want to make sure its eco friendly and OK to be in the water. Thank you

[@DrakesDetailing]

@@andrews1982 Look up igl product! they are all eco friendly