Mercury Tracker 25 Water Pump Repair | Mercury Tracker Water Pump Replacement | Boats.net

[@josephholey7616]

Best by far, you explained everything very clearly , THANK YOU

[@bmoreempire9745]

Straight to the point...perfect video..thank you sir

[@Getgraphics]

Great video.

[@brownson21]

What are the little o-rings for?

[@chadbosko8935]

Does. The impeller change direction when you use reverse so that it won't matter which way the legs are facing when you install it?

[@gilam19vc]

I'm from Brazil I like your videos very well congratulations

[@galaxys7650]

You need to put triple guard grease all over the impeller and plate and housing. Coat it well. Triple guard is special waterproof grease for applications like this. You didnt show installing the new big o-ring in the new housing cover. You also didn't mention that you won't need those 4 bolt bushings, because the bolts you have won't fit through them.

[@ANIMAL-Greenhouse]

U push it counter clockwise down(if u like that muscle method) but motor spins clockwise

[@craigmayhan4009]

I’m so confused. I think I have my impeller fins going the wrong direction because I’m no getting any water through my pee hole and all me tests show I have no clogged lines. Which direction should they be bending if I’m holding the housing in my hand and looking at the impeller? This way- curved to the right ( --or to the left ) 0 0. ). (

[@steven33068]

yeah he NEVER mentions that and like craig, i put mine in CLOCKWISE.. I had to break it down again and do the whole job a 2nd time. THANKS JOHN

[@steven33068]

@@craigmayhan4009 its not your fault Craig, the video is missing detail. and HE NEVER RESPONDS so dont bother...

[@Peaceful_Florida]

What kind of grease do you use in this video?

[@jamestankersley811]

What was that part number

[@JoseMfly]

Pounds of torque ?

[@APTennessee]

i have a 1994 25hp. How similar is the process?

[@RMASSBASS]

Great videos! Do you have plans to do a 100 hr service (including a water pump swap) on a Yamaha VF200 SHO?

[@jonhutchens9770]

Don't you turn the housing counterclockwise when you install it onto the impeller?

[@troywayne8759]

I'm sure you already figured this out since the post was 9 months ago. But for others... you don't turn the housing... you turn the shaft clockwise as you push the housing down. He should have been more clear about that.

[@miked602]

We did not see you removed the lower unit or reinstall it.