Glassing The Transom And Plans For The Coosa!

[@CapnJackSB]

Having built a fiberglass kit boat. I have enjoyed watching several people repairing fiberglass, boats. You show us the difference between an artist and the mechanics.

[@Michaelsbackyardmarina]

Great videos. You are my go to glass guy. I have been doing a 1972 Glasspar with a new floor, because of you I had the confidence to tackle the job. Not too sure I got it 100% correct but I have a solid floor now and I used all total boat products. Keep the videos coming.

[@johnowen8032]

Hi Andy Great video we bought a boat 3months ago before lock down. Top notch videos 👌 IV learn a lot from watching them. I was told but seems incorrect that to repair old fiber glass you have to use epoxy but watching you fix things bloody great Keep up the great work Regards John in the UK

[@michaelmccrindle1033]

OUTSTANDING! I commented many videos back about the power/hull dynamics being changed by moving the motors. I also said breakout the chainsaw LOL. I feel your a credit to the boating community in putting out high quality (read that as best information) on KZbin. Glad to see you adding stiffeners to help redistribute the power/hull dynamics. That was my major concern, But I should not have feared your work Sir is AA top notch per usual. You are one of the few read that as 2 now people I would ever allow to even think about working on my boat. On a side note people who dislike your videos and not leave a comment as to why they disliked it must be your competitors or just random bots that dislike every video on this forumn. I saw nothing "wrong" in this video. why would someone dislike it? Information was spot on and the execution was excellent.

[@tomtrask7220]

I think your approach to the refit is spot on I am glad I found your channel I am also in the process of restoring a 1960 yalta craft But my little boat is no match for yours but I love it just the same keep up the great informative work thanks again

[@clayfarnet970]

I don’t understand why no other comments have been made. 🤔🤔🤔 I’ll kick things off. Great job...she’s going to be battle ready. Thanks for providing us with your knowledge and workmanship. Much appreciated. 👍👍👍

[@4englishlies875]

I like the idea that you for the transom. I do not know if that is the way I would go, but that being said I would go your way over my way just because I have never done a transom before. So you are the expert here as far as I'm concerned. Great video.

[@paulappleton1529]

I'm working with a similar situation albeit on a smaller scale. I am considering using a router to cut out the plywood around the inset with is 3/16", glassing it to the abutting board, job finished. I'm a newbie and would appreciate pro/con comment. Thanks for the excellent tutorials, you've expanded my knowledge exponentially.

[@maurol.3731]

The forces exerted by the thrust of the engines are the upward pull of the stern transom and downward thrust. The critical area to be reinforced is therefore upwards. In the keel of my sailboat I have made a very efficient reinforcement by layering kevlar fabric on a closed cell polystyrene support in the shape of a triangle. In your case it must be horizontal from left to right and have the vertex facing the bow. The stiffness given by a profile with this shape is exceptional. I'm not sure I've made myself clear but I don't know how to send you a drawing. You will certainly receive many useful tips. Good job and keep healthy ...

[@djlurch1049]

Watching these videos are making me want to go nuts and find an old 60’s-70’s v-drive or jet hull that’s trashed, split the cap from the hull, use those pieces as plugs for a mold and then glassing a new cap and hull. Maybe its the never leaving the house thing that most of us are dealing with at the moment, who knows, I have done crazy stuff like that in the past so why not lol. Thank you for these videos, they are awesome.

[@alltree78]

That would be a great 3 hr plus video lol. I could watch this boat repair all day

[@besearchingforwisdom6267]

Engineer the new build so that each engine is tied to a single stringer. Don't depend on the transom to be the primary structure. I love watching your stuff, keep it up

[@dalespringerwilson4233]

When this is finished, it's going to be unusually strong I'm sure. Thank you for all the knowledge you impart to us !! 😎

[@hv9356]

I like it. I see the vision. Just a thought, suppose you come forward with the knees but keep them high enough to 1) create the joists for the flooring and 2) tie into the existing lateral stringers with a large rib/bulkhead, to create a kind of grid system, if you will. I have a 1998 Scarab 302 which started it's life as a bracket boat and they took that approach. 22 years later it's still solid.

[@hammervision6252]

Hey Andy, I redid my transom last winter using 1" Coosa and you can bend it. To do mine, I used reversed clamps (i.e. spreaders) to press the Coosa into the shape of the outer skin. Fortunately in my case the outer skin was/is 1/2"+ at it's thinnest (3/4"+ below the waterline). Long story short, it appears to have been very successful as the cores I drilled for the thru hulls didn't show any voids. Your work so far looks great and it brings back a lot of memories.

[@Nicholas_Shaw.]

Always learning something new and enjoying the journey with this boat Andy. Think the three knees with everything else will give you the peace of mind when completed. i.e. slight overkill but definitely worth it.. Keep up the great work..

[@chrish2996]

Hi Andy. You look happy to be getting on with the transom, removing the old rubbish is now rewarding. Great video thanks.

[@jnewts1]

Great work as always Andy ! Your plan for the reinforcement of the transom via knees and the full width beam sounds great mate , can't wait to see it come to fruition !

[@KriA76]

Yes comments work. Onto your question: it sounds like a solid plan. I guess it’s already in your plans, but I believe the support going across (to also support your new sole) is probably the key element of your new structure, so I would suggest reinforcing it generously, maybe with a cooza core so you get the needed cross section size to distribute the loads. It will be interesting to see the next updates!

[@awardsworth]

I have a Belmont classic boat one of the first to do a fiberglass bottom, Mahogany above waterline. Problem being the fiberglass blistered/separated going from the bottom around the side which only extends 4" to waterline or so. Would you glass those side spots again which are 12"-1" or less. Or make a resin silica mix and fill? Nice job on your video. Thanks for the info.

[@kevgermany]

Good job. Like your plan for going forward. How are you going to bend the coosa? Lots of clamps?

[@vingreensill]

Hi Andy. Thanks for a great vid. Your approach is so helpful for someone learning.

[@KeithCarmichaelInFL]

Keep up the great works and thanks again for all you do! Having this continue with "the situation" going on around us has really made my life a little less abnormal.

[@kiddiescripterkiller]

I used to buy the expensive tools but after my guys trashing them on jobs... I got used to buying and using Harbor Freight tools, for example... $12 for an angle grinder on sale... so I buy multiples and keep some in the boxes in case one breaks... Don't care if they fall off a ladder, deck, roof, whatever... haven't had any issues and they last pretty long... No dust collection however... But strategically placed shop vac nozzle does the trick. Very cool trick on laying up the layers... I've been doing mine one at a time on a vertical surface and trying to wet it out and get the air out with a lam roller, without the one under it moving, it has been a pain... especially after the third layer. I'm going to get a big piece of plastic and try it tomorrow if it doesn't rain...

[@georgelambertson300]

Capt. Andy,I agree with your plan to strengthen the transom with tying the supports from the stringers via to the Ledger through and over the keyholes what would you say adding a additional Ledger above the a few inches above the Coosa previous mentioned ledger across the entire transom that would be what my Grandpa said "Belt and Suspenders" dam britches can't fall to your ankles with your hands are full...Txs., for allowing me too throw another which you have covered I truly enjoy your Boat Skills ...

[@dnnsmrgn]

Awesome work ,with my limited knowledge there would be nothing for me to add ...I watch and learn .I have watched %80 of your videos. I have a 98 23SR Maxum came from Florida and needs all layers (5--7) bottom coat stripped and start over and a paint job. And from watching your videos it wont be gel-coat LOL

[@jflefort9490]

Andy, I love your videos. very informative. Thank you for sharing all the tips and tricks. This project has become a part of my Sunday morning ritual. I have to admit, I'm starting to wonder if it wouldn't have been a whole lot easier at this point if you had just simply taken a chainsaw and cut the whole transom off and rebuilt it. I admire your patience but look forward to another boat, another project. Cheers from Edmonton, Canada

[@alansmallwood301]

The transom I removed was flat, there is a tiny offset midspan, bottom to top they went over it, no bond. Would peanut butter in the void be strong enough, I am looking for better bond to new transom? Thanks, videos are great!

[@keitholiver157]

Thank you for your videos Andy. I always look for them and enjoy them. Glad you got rid of the wood on the transom (peace of mind) and i like your plan for the knees and ledger . Have agreat week sir! -kao

[@robertgarbe6348]

Your building a battleship, it’s great. The stress of the outboard will, of course, be pulling back on the top of the transom and pushing in at the bottom, so that ledger and knees are very very important.

[@chuckscheaffer4694]

I think creating a shelf across the transom to support the sole can offer so much structural support, you can skip adding knees. The shelf can be used to reattach the stringers to the transom. If you add seating across the back of the boat, you could re-enforce the transom with a second horizontal shelf and add storage boxes under.

[@realsonnysullivan]

My personal favourite in the series! Good work, thanks!

[@burtuh60]

Thinking about the Armstrong plate, are your knees and extra support stringer on the transom not going to interfere with the plate installation?

[@OnMyLastLeg]

So looking forward to the next installment.

[@wassawbound2926]

I’m about to take on this same job but my bracket is not installed yet. Should I basically do as you’ve done here but on both side? Just as in your hole repair video? Should I use epoxy. If so, I assume my only option for the exterior finish is paint. I imagine the bracket covers most of the key hole anyhow. Are you planning epoxy for the entire transom job? I have stringers to do as well. I was planning to use vinylester for them. The hull is a Formula 233.

[@300e24v]

Top work as usual and I'm glad to see you are over engineering the transom, so many are built to "just" perform...

[@ChristianCastleman]

That’s gonna be really strong. Good plan Andy.

[@chairfarmer1511]

Great video. It looks like there is a gap between the keel and the transom. Is that because you cut away the keel/transom joint when removing the ply on the transom or was the gap there allowing the ply to fit between the keel and the transom. In the end does the keel need to be tied into the transom and is the keel a solid piece of glass?

[@thecarolinahoosier3596]

Compact router would be ideal for the keyhole wood removal. Good depth stop control, and the keyhole opening is a perfect guide for the bearing.

[@evanhamaker]

You are the man. Thank you for going through everything with such great detail. I learn more on your channel and channels like this on KZbin than anywhere else.

[@AtinaEstrella]

Hi, my husband has been following you and working on his boat. He would like to ask on the Alexseal paint, whats the ratio for one gal of paint how much of the hardener is needed? And also thinner?

[@DougsMessyGarage]

Andy, would it be a good idea to put a second cross piece (similar to the ledge for the floor) higher up on the transom. It would have the dual purpose of supporting whatever you end up using as a back wall as well as beefing up the transom. Perhaps make some sort of vertical tie-in from your under floor knees to the second horizontal cross piece. Belt and suspenders sort of idea.

[@GjS-UK]

More great work Andy. Thanks for sharing.

[@ianupton4027]

I think it will be more than strong enough. Transom thickness of 2” with 1.5” of Coosa and 1/4” glass on either side will support 400 + HP outboards. Never a problem to go overboard.

[@simonlee8327]

love your work, thanks Andy, sounds like you have a plan. the OCD and over kill is why i love to watch your channel. This will make this better than new, and last for eva.

[@DeVerm123]

Hey Andy, after the 2” coosa I would grind the edges flush with surrounding area, then tape that in with a bunch of 1708. Also, I would follow that up with layers of 1708 over the complete transom, with a little window for the VIN...instead of layers of 1/2” coosa ;-)

[@GunDoctorHTown]

Doing the wet out on the table was an idea I wouldn't have thought of, been following the Bertram Transom project to help plan out the transom replacement on my Bonito and it looks like Total Boat will be getting an order from me soon!

[@TherapyMA]

since you started the repair with epoxy, are you going to stick with epoxy for bonding the cosa, or will you switch to polyester for the rest of the layups?

[@jw725]

Hey Andy, Love your channel. Do you ever use micro fibers (West System 403 or equivalent) between layers of glass during a layup? I’ve heard it adds a little strength by bridging the gap between the individual layers of glass. Do you think it’s worth it to add them when using 1708 or is it strong enough without them?

[@joesloan1724]

IMO, your plan is excellent. It will be interesting to see. What material will you be using for the knees and sole brace?

[@winmosser]

Yep! Boy I sure wish my grinders would play guitar music too!! I sometimes protect a thin spot by sticking some thin sheet metal over it with super77. If it’s super fragile remove it later with a guitar string. Good work glad to see you using a mask when mixing esp cabosil.

[@brianhof7599]

Sounds like you have a good plan for the knees and horizontal support. Once all of the Coosa is in place, before you attach the knees, do you plan on installing a couple layes/sheets of 1708 from the entire side to side, covering the transom all the way to the corners? I’d love to see you tuck the Coosa entirely in place with a nice snug 1708 blanket(s).

[@nlintgen]

Progress, woohoo! What type of plastic is covering your bench or, more importantly, any tips for finding similar? I’ve struggled finding sheet plastic that isn’t folded on the roll, which then leaves ridges when unfolded and laid flat.

[@stenimportenivalboab4477]

Hello. I been watching a lot of your videos lately and I am learning so much from them, but one thing that I am looking for is a good way to bridge a gap with fiberglass and polyester resin. I am currently on a project on my boat to make the roof a little bit higher so I have cut the walls and lifted them up about 5cm and now I want to glas them together, but it’s a vertical surface and I need some type of support to glass against. Before I have used some tape, but then the gap was tiny. Have you done something like this work in any of your videos and if so, can you tell me which video it is? Hope you understand me, English is not my primary language. Best regards Jimmy from Sweden

[@OutdoorAdventureTV]

Really enjoying the series! Almost 16k views and no comments? Can't be! See you next week!

[@Bill_N_ATX]

Your plans sound good, maybe even overbuilt if there is such a thing. Most people have no idea how strong multiple layers of fiberglass sandwiched over a strong filler material is actually. Main idea is to get a good solid connection to the stringers etc so that the forces of both propulsions and the sea are shared and transferee. I’m sure a marine engineer could probably cut out some weight with a good design but it’s a boat not an airplane. An extra hundred pounds of glass and resin isn’t the end of the world.

[@Xpyburnt_ndz]

I'll be hitting you up for ideas this winter Andy! Going to rebuild the consoles in my boat...they are literally falling apart right now. I'm going to rebuild them then probly glass the wood over...it's a 1989 Bluefin 1900 sportsman...the ply the manufacturer built the current consoles out of has rotted...I got the boat from my dad and redid the floor last year...consoles this year! Boat ownership fun eh!? LOL

[@djmjr77]

Nice Andy!! Progress!! I think your knee idea is fine. Are you going to make a hatch for that back area when the floor goes back in?

[@orangepekkaballs2657]

hey, love your I recently got a 16ft fiberform boat. and it needs a transom rebuild. if you get a boat like that and it needs a new transom. or if you are just fixing it up can you post a vid on that.thanks

[@howechilds5060]

I have been working on a transom. I have been laying up 1708 and always end up too foamy with my epoxy resin. Watching you it looks so easy. What is my issue? Maybe trying to work to fast ? Too aggressive with my squeegeeing? Loving this build!

[@navidave95]

Question to a open transom that has an outboard. I came across a 13’6” 1985 Bay liner Capri (I think) Title just says Bayliner ; in ant case, I want to enclose the transom and put a swim platform on it. Can it be done? It had a lot of rot so I gutted the entire inside to start from scratch.

[@boatworkstoday]

Are comments working lol??

[@TheRosebuddage]

HEY THERE HOW DO I CONTACT YOU FOR A BOAT REPAIR?!

[@jasonfrary]

I have left some but no replies :( I can only see your comment and mine though so something isn't working.

[@SteelDoesMyWill]

They are now

[@jimlucier7968]

I only see my comment and this question.

[@davefoster7770]

Apparently. They are. It's coming along nicely. Slow but steady may not be the thing for the instant gratification expectations of today's internet though. I think people have got used to seeing a years work finished and then trickle fed to them over a two month period. Thus prompting expectations which can never be met in the real world. Anyway keep on winning the small ones and it'll get done. :)

[@shoresharp8349]

Andy the layout you have in mind sounds great. On the knees I would run them forward to tie them in to a bulkhead that is connected to the original stringers.

[@bjodaddyo]

All I can say is you do great work and Thank you for sharing your talent.

[@Sunfish16]

What kind of epoxy or thickened epoxy would you use to glue the transom coosa to the glass? Weather it be West systems or Jamestown or Total Boat? 2:1, 5:1 what thickener?

[@danielcrete6205]

Andy Have you considered a stack of horizontal laminations, rather than the vertical sheets you are planing? The idea is that it is more difficult to bend a piece of coosa that is 3-1/2” wide than 1” wide. This would also allow you to custom tailor the coosa to fit the entire width of the area you want to cover without having to force it to bend. I’ve had good success with the technique.

[@electricpony575]

Andy is there a way to cut out the hull number and glass it back in towards the end of the project?

[@BobMuk08]

'Life on the Hulls' has been using some fibre Glass angle stuff to fix floors & modules in the hulls of his Cat... seems to be the same sort of application you want. I saw one guy, 'Building Wilda' made a mould to make some lengths ...

[@pezpengy9308]

i recall you once saying that epoxy on glass can be tricky because the epoxy, unlike the resin, doesnt melt into the cloth so binding can be an issue. im guessing that can be overcome with sufficient squishing? i recently repaired a hole in my deck with your method of sanding a crater around the hole (tapered) then layering in alternate larger layers of weave and chop using epoxy. so far so good but...

[@jasonfrary]

Did you not say that you needed to bolt the bracket later, would your ledger idea not get in the way of those bolt holes when put in at sole height?

[@ruaraidhmcdonald-walker9524]

Hey Andy, apologies for the dumb newb question but why not remove the Armstrong, revert to original setup and refit a pair of IOs? Thanks for the video so relaxing yo watch glassing and sanding. I’ll go back to fixing a lower unit now....

[@richardbecker5614]

Beefing up is an understatement. You will have built a tank once you create the 3.5 inch thick transom and added the knees. How much weight will you have added to the total project? I love the project.

[@michaela1655]

That transom looks great!

[@chrislangdell117]

Decent ideas. If your looking for strength. Which is obvious. Using a few layers of S2 Fiberglass will give you all the strength you could desire. It is used in aerospace composites and it is stronger than Kevlar yet conforms to curvature much more readily. Its a bit more expensive. But 10 yards of it. Wont cost as much as a 3/4 sheet of Cosa. 1 layer inbetween your cosa sheets 3 layers over the top. A few layers of 1708 on top for sanding and fairing.The rest of the S2 for tabbing in your transom and knees. After that you should be able to park a dump truck on the transom.

[@BrokenBlade55]

Ok I'm totally confused and in need of some help. I'm getting ready to start repairs on my boat, it's a 70"s model. I was going to use polyester resin for my repairs on transom ,floors and seat risers. When i talked to the local boat shop where i was ordering my supplies. They told me i can't use polyester over polyester i would have to use epoxy. Ive put polyester over polyester before the whole thing is polyester. Am i mistaken and doing it wrong?

[@Twelvestonestacking]

man, i get some many ideas,(shortcuts) by watching your vids...thank you once again!

[@NikonF5user]

Speaking of which, I want to use pigmented epoxy to skim the entire canoe. Any suggestion as to how to epoxy onto a vertical surface? It would seem challenging to set up a rolling rig of some type...

[@jasonfrary]

I love the idea of getting those shears, are they rechargable?

[@RandomDoive]

I reckon your plan is excellent.

[@gregorywest2029]

Where are the bildge pumps going to be installed? Keep them comming. Thanks

[@mechanicallyseparatedspiri8638]

Ive got a 74 Allied Mistress Mk 3 (hull #1 if you believe it). Ive been fixing blisters and removing thru hulls, 8 thru hulls. 1 went back in for inboard diesel cooling, installed with 5200...I hope I didnt anger the boatworks gods in doing so.

[@bwk_guybwk_guy2937]

Looks good! What will you use to flush it out around the edges of the 2” of coosa for the 1/2” to lay over?

[@CarlyleSmith]

Interesting as always. How do you keep your rollers from hardening up while you are doing multiple batches of resin?

[@AlejandroHernandez-hz7gi]

I had a question about one part paint. Can I use it as a sealer for unwax or polyester laminating resting as hell coat is expensive and it's easier to just have one type of resin? Thanks love your videos.

[@AlejandroHernandez-hz7gi]

*Gelcoat not hell coat

[@thegrumpytexan]

Excited to see your progress! Anxious to see how this turns out.

[@Makermook]

I'm building a wooden boat and, man, I should have watched your videos earlier. I used standard weave fiberglass cloth and it was a pain in the tuchus to lay out wet. 1708 looks so much easier.

[@PBVader]

Considering Coosa for my flat transom job at 1.5 inches thick. Q1: Will that inboard top layer want to pull away after stress or years? Q2: Will you be feathering that edge, either side? Looking forward to the results of this project.

[@zv3000]

For a second I actually thought you were using a foam roller to spread the glass initially. Also i'm working on a project where i took a swim platform and extended it from 17" to 25" (was shooting for 24 but hey i'll take the extra inch lol ) now i've come to a point where i have the two original sections glassed back together in their new positions and i am working on strengthening these connections and building up the new section of "deck" with new ribs my plan is i'm using 1.5oz csm at the moment to build a first layer of the new deck sections and glassing the two original pieces back together sort of as a "tack" then plan is to go over with Biaxial and really make it strong and build up thickness. I can get 1708 locally so this is the next best thing i can do. The plan is to use this platform as a display for a product i'm working on but this will involve cutting a rectangular hole in the platform to then put in a casing so to speak which would be molded separately using csm and carbon twill, Which potentially would cut out a good portion of the csm/biaxial i would have previously glassed in . Would you take the time to do the Biaxial cloth in this case where majority of it could end up being cut out ? Plus is there an available option to thickened resin ? something that is already thickened ?

[@NikonF5user]

I wish I had seen this before I started working on my canoe this week! I used fast hardener which I believe did not allow for leveling before curing, and now I have little divets all over my repaired areas of the canoe!

[@mbhull27]

Thanks Andy - I always learn something every time I watch!!

[@alectrondorfman1057]

You might consider through bolting that ledger board through the transom, and through the platform brackets. That way you make the platform stronger as well as the ledger board. But if you cannot hit the brackets just through the transom would give huge added strength to the boat.

[@robertwalker3168]

I cant find the vid of the final internal glassing of the transom, can someone post me a link PLEASE.. Bob UK.. Amazing videos...

[@beefcakes27]

Robert, he took a break and is back adding videos on this project... Cheers..!

[@angellovesong100]

Yes and I’ve got a question about a project I’m working on my boat fell off my trailer and put a hole right at the bottom of the transom and I’ve got to fill it in but it’s pretty deep I was wondering if I could glass it then add some faring and put glass over that or do I need to fill it chopped glass then woven it’s a lot to fill

[@bpickerell]

Ok I will ask a Question. If you needed to use thicker Coosa but needed it to still be able to bend, could you just score it and fill with thickened epoxy or would that negate the use of the coosa in the first place. Also, why don’t you just botch around the hull number to get more height?

[@aaronmeyer6244]

Are you planning quad 400r mercs on there, wow I need you advice on repairing my 20' bass boat transom. I also noticed you didnt ''prime'' the plywood with resin, I guess it wasnt a concern in this instance?

[@112doc]

It is possible to bend thick ply or Cousa by placing serial, parallel cuts into the material. Carried down to within 1/8 inch of the surface allows the material to conform as a flexible skin. Fill the grooves with thickened epoxy and a layer of 1708 between. Epoxy and repeat.

[@ascott6804]

Ooh yes!!! Lets do some glass!!!

[@Rspri10104]

It sounds like you have a good workable plan.

[@loxahatcheeliving2300]

I love your videos and the information you provide really helps me with my own projects. If we shouldn't use 5200, what should we use? Thanks again for all of your effort. You are helping more people than you know!!

[@JimDorn]

Comments are working Andy. I think you have a good plan going forward. One question, if you put a knee in the center, will your boat not have a drain plug (I'm a bass boat guy) or will you just put it to one side of the knee??