How To Flip A Car Part 2 chevrolet aveo clutch replacement

business and permissions inquires [e-mail]
Chevrolet Aveo clutch replacement
Is it possible to make money by flipping cars is it worth your time and effort and all the bad things that happen when you try and sell a car dealing with with people let's find out with this video series
If an Bodgit And Leggit Garage, Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE:
/ bodgitandleggitgarage
paypal.me/bodgitnleggit
ko-fi.com/bodgi...
/ bodgitandleggitgarage
www.gofundme.c...
bodgit and leggit garage
tips and tricks inside this video hopefully help you
don't forget get your hands dirty
www.bodgitandle...
bodgitandleggit...
bodgitandleggit...
/ bodgitandleggitgarage
/ bodgitandleggitgarage
In this video series we are showing you is it possible to flip a car to make huge profits if you can do the work yourself and you can find the right car we are going to show you you can make profit in buying and selling cars
A clutch is a mechanical device which engages and disengages power transmission especially from driving shaft to driven shaft.
In the simplest application, clutches connect and disconnect two rotating shafts (drive shafts or line shafts). In these devices, one shaft is typically attached to an engine or other power unit (the driving member) while the other shaft (the driven member) provides output power for work. While typically the motions involved are rotary, linear clutches are also possible.
In a torque-controlled drill, for instance, one shaft is driven by a motor and the other drives a drill chuck. The clutch connects the two shafts so they may be locked together and spin at the same speed (engaged), locked together but spinning at different speeds (slipping), or unlocked and spinning at different speeds (disengaged).
Disclaimer:
Due to factors beyond the control of Bodgit And Leggit Garage, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Bodgit And Leggit Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Bodgit And Leggit Garage recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Bodgit And Leggit Garage, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained
#flippingcars #makingmoney #clutch

[@bodgitandleggitgarage]

I meant to say between 1000 to 1100 let's see what I get at the end of this

[@old_con]

I love the way it is “live” recorded, so you you get the good and the bad moments worts and all ! But this is workshop life in reality, it is hard work BUT it is doable, thanks for showing us how Leon. 👍🏽😎

[@bodgitandleggitgarage]

Yes mate exactly I do not cut anything out my videos are real life not Hollywood

[@JoeBob79569]

Nice job. You can't beat the high you get from fixing a car and it works afterwards! My first attempt at fixing my car, was back in the 90's. I replaced the wishbone on my Fiesta, but I screwed up something and the whole hub, wheel, mounting and drive shaft, just popped right out immediately after I attempted to drive it. It was a big mixture of sadness, embarrassment, and anger..

[@bodgitandleggitgarage]

We've all been there done that if the real world mate LOL

[@terryatkinson899]

Car is probably sold by now Nice to see how you do it like the rest of us on the driveway, although Santa didn't bring me an impact gun...the bastard!

[@bodgitandleggitgarage]

🤣🤣🤣

[@Che-Saidi]

well explained,looks doable by a novice if one pays all attention.Challenge i got to get the Gbox back had not removed the drive shafts does it really matter much

[@kevinpavey2324]

I drive a Chevrolet Spark, smaller than an Aveo, yes we have those. Thanks for the clutch video

[@bodgitandleggitgarage]

Thanks mate

[@johnulmer6715]

I did an engine swap in a 2010 Aveo about 9 months ago. Make sure you have plenty of vasoline for lubrication because it's TIGHT. Replacing the clutch was easy with the motor out tho. 🤙

[@grahamrushin4384]

Last clutch I did was on a mk1 astra van about 25 years ago. 30 minute job.pity that design isn't on all car's. Sorted ✌️

[@bodgitandleggitgarage]

Boom SORTED lol

[@BJ0BHAX]

So glad you were cursing and you kept it in the film. It's back up for me when I show the wife that even the best of us like a curse.

[@bodgitandleggitgarage]

I keep everything in all my videos it's the real-world my videos are not Hollywood we all struggle just most people don't put it in their videos

[@adrianmassey6673]

Not fun on the floor. Are you going to be able to get your lift installed in your new place?

[@lukey3507]

Easy on the floor. Done plenty on floor along with engine swaps.

[@bodgitandleggitgarage]

It's more awkward on the floor certainly does take a little bit longer but as you can see not impossible I will be doing some engines as well on the floor been doing it this way for years

[@boostupcoverband]

hats off mate

[@armunro]

Woohoo. Looks an easy one. Not loads of stuff in the way or a small space to work in. Nice one Leon. Look forward to the next part...

[@bodgitandleggitgarage]

Thanks mate

[@jaybenjamin5649]

PLEASE PLEASE PLEASE DO MORE VIDEOS WEEKLY OF THIS !!

[@kudakwashekeithnhlane7679]

Hi I just wanted to ask how much amount of gear oil should I fill up on chevy aveo 1.6

[@Krillekris]

Great work mate. Hope you get some profit on this car :-) Here in Norway, it is icy, snowy and cold. I plan to do some tinkering in the spring :-)

[@bodgitandleggitgarage]

Thanks a lot mate looking forward to seeing your new video

[@MAGWolf]

I just bought one for 2k 115k Miles on it. Sadly clutch went out on way home.

[@MAGWolf]

Is it possible to support the engine from below? I don't have one of those expensive bar things?

[@billjackson6621]

Well done have clutch to do on a hyundai hope it goes as well for me

[@bodgitandleggitgarage]

Best of luck mate have fun

[@arthurfricchione8119]

Leon your back great video sorted 👍

[@bodgitandleggitgarage]

Thanks mate

[@andy_v4443]

good stuff leon, BIG THUMBS UP

[@bodgitandleggitgarage]

Glad you enjoyed mate

[@gabivaduva4697]

How many liters of oil went into the gearbox?

[@richardsedorski1206]

My god what a job well done.👍👍👍

[@bodgitandleggitgarage]

Thanks mate

[@andrewmolloy5095]

nice job Leon and Shaun!

[@bodgitandleggitgarage]

Thanks mate

[@BensWorkshop]

Ah.. The joy of changing a clutch on the ground! PITA on a front wheel drive. Easiest I can thing of is on a Triumph Herald, Spitfire or GT6 because the gearbox comes out of the passenger cell and you don't need to jack the car up to do it.

[@bodgitandleggitgarage]

Boom SORTED lol

[@markknights5109]

Glad your dog wasn’t in the back when you braked lol. good work 🍺🍺🍺🍺

[@bodgitandleggitgarage]

Thanks mate

[@eddieMurphy11111]

another job well done good video thanks and take care

[@bodgitandleggitgarage]

Thanks mate

[@jaybenjamin5649]

Is it not easier to pop the ball joints out on either side instead of the pinch bolts for the suspension ?

[@davethornewell7417]

A word of warning to anyone doing a clutch on an Aveo or Matiz, be very careful with the inner driveshaft seals, they are only available from GM, cost about £9.00 each and are supplied in pack quantities of 10, both sides are different, I remember from when I used work at a dealership.

[@bodgitandleggitgarage]

Boom SORTED

[@jaybenjamin5649]

Here’s an interesting question for ya mate. If you had your time over again would you choose a different career ?

[@colinhamer6506]

I just did a 08Ford focus 1.9d what a pig that was with all the pipes and bits using the gearbox bolts for mounts

[@bodgitandleggitgarage]

Sorted

[@joachimjohan1215]

have you ever heard about the XTOOL X100 PAD2? u know if its bi directional? AND the Ancel X6 OBD2 Diagnostic?? (supposedly does some bi directional controls)?? cheerz!

[@bodgitandleggitgarage]

I've never used them mate so I cannot say sorry

[@joachimjohan1215]

@@bodgitandleggitgarage xtool company aswell as Ancel is cheap junk scam do not buy

[@musheyali5933]

10.33 ive actually snaped the bolts once Their always seized

[@bodgitandleggitgarage]

😥

[@vdubs6068]

Great Vid Leon 👍

[@bodgitandleggitgarage]

Thanks mate

[@michaelrobinson5592]

Good job 👍

[@bodgitandleggitgarage]

Thanks mate

[@michailokeefeMooMoo]

That must’ve taken you hours to get that out. Looks like you got a oil leak on tappers cover

[@bodgitandleggitgarage]

Didn't take long at all mate a little leak and people spilling oil over the years

[@a11csc]

nice job

[@bodgitandleggitgarage]

Thanks mate

[@Michael33342]

What kind of impact gun is that?? How many nm is it rated for? Thanks

[@bodgitandleggitgarage]

It is a facom and it's 1630nm

[@iankelly2110]

you can but its getting harder another 10 to 15% is been added to parts by motor factors because of Brexit Euro car parts have all ready added this on the trade accounts

[@bodgitandleggitgarage]

Yes mate I know we have to pay import on everything now

[@IBenZik]

To flip a shove it or leave it you roll it over on its top.

[@bodgitandleggitgarage]

Lol

[@simonrawle7885]

cheap cars but so simple to work on

[@bodgitandleggitgarage]

Yep

[@crawfordjoe]

Turn that fuckin camera off!! (We've all been there)..👌🤣

[@bodgitandleggitgarage]

🤣🤣🤣🤣