Boomba Racing BOV 2.0 Ecoboost Install and Review

[@LuizPimentaOficial]

2016 fusion yes?

[@BadgerBuilt]

It was a 13' I actually sold it and bought a 16' focus ST

[@LuizPimentaOficial]

what year of the car?

[@BadgerBuilt]

Its a 2013

[@slawbunnies148]

I have a 2019 fusion 2.0t do i need the adapter or the bov?

[@BadgerBuilt]

Should be the same as this 2.0. BOV

[@bandit230991]

2013 ?

[@BadgerBuilt]

Correct

[@chrisserfozo]

Just installed mine, you can cut/trim the bottom right side of the factory bracket and reinstall it with the Boomba hardware. Then you don't have to "temporarily" ziptie the solenoid out of the way, you can just put it back in place.

[@BadgerBuilt]

Right on! I actually figured out how it was intended to go, I talk about it in my putting it back to stock to sell video kzbin.info/www/bejne/m5CvhqODhryFoNE

[@ckeller1981]

Did you ever take off that plate in front of the intercooler

[@BadgerBuilt]

I did

[@OliverStFort]

I installed it but no wospa sound.. any help?

[@BadgerBuilt]

That's odd, any way you could send me a picture? Of it installed that is. See if I can maybe point you in the right direction. You have the vacuum line installed correctly?

[@jadenwallace9568]

I seen you said you took it off so you still have it for sale?

[@BadgerBuilt]

Unfortunately not anymore, it went with the ST Focus when I sold it

[@kevinWaubonsee2]

I’ve got a 19’ 2.0T if I get the adapter will I get the sound still since I already have a bov on my model

[@BadgerBuilt]

Is it a fusion?

[@Doob2x]

Can i ask where is it located on the car I’ve been looking and can’t find it please help

[@BadgerBuilt]

Doob2x it's located on the turbo housing itself. If you take the passenger front wheel off and look just above the CV axle, you'll see it. Also my putting the fusion back to stock may show it better

[@LandonJines]

What year is this fusion out of curiosity? I have a fusion and I'm about to do the install and need to know what's going on that's for sure!

[@BadgerBuilt]

This one is a 13'. There's a close up view of me removing it before I sold the car. It's in another video.

[@hunterletner9428]

I installed mine but after I got a check engine light, I took it to advance auto to get it read and it was reading something to do with the turbo anything to be worried about ?

[@BadgerBuilt]

I would make sure your vacuum lines are all connected properly, it shouldn't give you any fault codes at all

[@BadgerBuilt]

At least not due to the BOV

[@vector150]

so you dont loss power doing this?

[@BadgerBuilt]

No gain or loss in power. Just makes it so it's audible

[@aidanpecora1593]

Can I do this without a lift?

[@BadgerBuilt]

Sure can. I good jack, and a couple properly placed jack stands. You just need to get the pass front tire off

[@aidanpecora1593]

@@BadgerBuilt alllll right just placed my order on it!!

[@BadgerBuilt]

@@aidanpecora1593 hell yeah man! If you go to my vlog-ish playlist, the video of me taking all the parts back off has a closer view of what needs to be done

[@noahbelscher2227]

I got a 2018 2.0 fusion I’m wondering where to install it

[@BadgerBuilt]

Same spot. Remove the pass front tire, and look just above the CV axle. It'll look just like mine in the video

[@noahbelscher2227]

@@BadgerBuilt thank you, I’m new to all this stuff and I’m having my buddy help with me with it but he’s busy a lot so I jsut decided to mainly learn shit on my own lmao

[@BadgerBuilt]

@@noahbelscher2227 That's the best way to learn man. Hands on. I have another video of me taking it back off, that is more in depth. I would recommend at least skipping to that part of the video and watch that. Also, feel free to ask any questions you might have. I'll do my best to help ya out

[@BadgerBuilt]

@@noahbelscher2227 kzbin.info/www/bejne/m5CvhqODhryFoNE

[@noahbelscher2227]

@@BadgerBuilt thank you so much I appreciate it

[@spotonndiyvids6065]

Great video brother love your sense of humor :)

[@BadgerBuilt]

Thanks brother man!!

[@lucasedmundo1296]

I would like to know where I can find this original part, do you have any factory number or exact name please

[@BadgerBuilt]

If your talking about the factory valve I removed, I'd try your local Ford dealer or any Ford parts suppliers.

[@killtag2173]

Do you have a link for this blow off valve i cant find it on Amazon

[@BadgerBuilt]

The web site is in the video description

[@jazmynravae]

does your car have to be boosted/turbo to have a BOV ? or can i just have air intake with bov only ?

[@BadgerBuilt]

Only on boosted vehicles. It releases the excess boost after you let off the throttle. Hope this helps

[@neoknight14215]

I'd say make sure you have the fusion 2.0 or sport.

[@Drakullia]

Bro, will this fit in a 2012 ecoboost Edge? Thank you!

[@BadgerBuilt]

Does it have the 2.0??

[@Drakullia]

@@BadgerBuilt yeah! Actually I saw that link you shared and yes, I will fit. Thanks bro!

[@BadgerBuilt]

@@Drakullia No Problem. I actually still have that one. i took it off before i sold the Fusion for my Focus ST. I dont know where you located but if you were interested, id sell it to ya. Just gotta figure shipping. The ST came with a Turbosmart adjustable BOV. i dont need 2 lol

[@Drakullia]

@@BadgerBuilt Hi bro, Sorry for the delayed response! I'm from Mèxico, that's why I was looking the shipping details in the page, but I really appreciate your offer! I will be watching more of your videos!

[@sethgokart]

I want to order one for mine idk what one together

[@sethgokart]

To get

[@BadgerBuilt]

I had no complaints with the Boomba. I still have it in the box. Took it off to sell the fusion to get my ST Focus. Which came with a Turbosmart BOV

[@justindeprey2597]

Do I need to use the stock spring that came out of it or does the booba have a spring inside it

[@BadgerBuilt]

The Boomba has its own, you will just remove the factory spring

[@ianisblazy]

I got a 2017 2.0T Lincoln MKZ, would this fit in my vehicle? It’s hard to find anything that would work with my Lincoln, as aftermarket parts are rare to find.

[@BadgerBuilt]

I believe so, the MKZ turbo has the same style as the other 2.0 Ecoboost.

[@1lifted4.6]

im trying to find out for my 2016 lincoln mkc 💀

[@BadgerBuilt]

@@1lifted4.6 does it have the 2.0 Ecoboost??

[@1lifted4.6]

@@BadgerBuilt yess it’s a 2.0 EcoBoost

[@BadgerBuilt]

@@1lifted4.6 Than the same part should work for yours as well my friend

[@TheDarkskull1212]

do you have a list of mods for this car ?

[@BadgerBuilt]

I didn't do much before selling it for my 16 Focus ST. Just the Boomba BOV, some exhaust work, and Godspeed lowering springs. But most of the mods on my Focus could be done to the 2.0 in the Fusion

[@snake661]

Is that a boobaroo?

[@kaozz21965]

I see so much of me in you. love u son.

[@mikelbogner2661]

Sounds good.