Thank you for this video!!!! You explain everything very well. How far up should we paint the tub, also how long does a normal grow take from start to finish? And go cards!!!!!
@BoomerShroomer4 жыл бұрын
Daddy Dank Thank you! Paint the tub up to the top layer of bulk substrate. So about 2 to 3 inches. It doesn’t have to be exact. The whole process is about 2 months. 1 month to fully colonize the spawn bag, 2 weeks to fully colonize the bulk substrate.. then two weeks of fruiting. 🍄
@rustyvessel5086 Жыл бұрын
Do not order from Spawn Magic. They have been recommended by other Mycologists with a promo code but they are frauds. Look up reviews
@raymondrobbins94952 жыл бұрын
Little tip if you are using a hole saw cut the holes in reverse this will help prevent the cracking she mentions :)
@MM-sq5pf2 күн бұрын
Good policing of how to vids
@dnacreations963 жыл бұрын
I recently just came across your channel...and let me tell you you are absolutely so clear and detailed when it comes to growing shrooms!!! I appreciate you and your channel. I’ve come across many channels and not as clear as yours. You keep it short and simple. That’s what we need. We need simple. Many teks out there are just too much. I miss how mycology used to be very simple and you brought it back for sure! Now people have too many teks and the newbies get very thrown off by so much information.
@BoomerShroomer3 жыл бұрын
Thank you for your comment! That’s exactly what I’ve been trying to do. I really appreciate it!
@kazablu19296 ай бұрын
Totally agree. I've watched so many videos preparing myself to grow mushrooms but they weren't giving all the information as you have. I wish i found you sooner, I could have saved so much time.
@momsmushroomsjodyfoster57863 жыл бұрын
I am loving the dual screens. Gives a much better understanding of what’s happening. Thank you
@BoomerShroomer3 жыл бұрын
Thank you!
@cacogenicist2 жыл бұрын
If you really don't like side pins, painting the bottom of the tub will not prevent them. Side pins occur in painted-bottom tubs without _liners_ because the space between the colonized cake and the sides of the tub -- which develops as the cake shrinks a bit -- is a very good microenvironment for fruiting. It's not really not so much about light. But a reasonably thin liner (like some cheap black garbage bags -- not thick contractor bags), will adhere to the side of the cake as the cake shrinks -- and therefore prevent that pinning microclimate from forming. That polyfill stuff is so untidy. You can use micropore-type tape -- or better yet, you can buy pre-cut, circular adhesive micropore filters to neatly place over your holes. Additionally, the very popular dung-loving species you're probably considering growing doesn't really need to be cased. Although opinions differ on that a bit. Also, the holes in that tub could stand to be placed a little differently. Assume about 3" of substrate, side holes will be about 4 or 4.5" up. The holes on either end should be up higher than is depicted here.
@13Knives13 жыл бұрын
I feel like if my life was Inside Out you would be the part of my brain that's excited about mushrooms. I've wanted to try for 3 years now and after searching everywhere with no luck I decided to say hey F it I'll grow my own. Now I'm 2-3 Business days away for my spores. I'm honestly more excited now for the actual process vs the end results. I've always geeked out about stuff like this, I love it!
@BoomerShroomer3 жыл бұрын
Yay! That’s so exciting! Send me updateds!
@nateoliver32853 жыл бұрын
Did you end up growing any?
@andyballenger384 жыл бұрын
Very comprehensive overview of these steps. Looks like it yielded good results.
@BoomerShroomer3 жыл бұрын
Thank you!
@XChromEmo666X2 жыл бұрын
Great video but I would like to definitely let you know that the reason that side pins happen or because when the substrate colonizes it itself shrinks therefore creating microclimates that happen between the shrunken cake of mycelium and the walls of the tub so even though this happens will be small any light that hits the side of the tub and goes down will still fruit the bodies. A plastic liner will adhere to the side of the mycelium itself creating essentially a seal preventing a microclimate.
@JubeProductions2 жыл бұрын
Thanks for this explanation. I've been doing research for a monotub grow and I understood that you need to prevent side pining, and I didn't know if I should use a liner or paint. To me, spray painting just seemed easier than making a liner, but you explained why a liner would be better. You saved me finding that out for myself.
@jahmezis452 жыл бұрын
Do I have to worry about side pinning if my tub is dark green green at the bottom? Should I still do the liner?
@ButtSauce6662 жыл бұрын
@@jahmezis45 that sounds like a HORRIBLE contamination
@ButtSauce6662 жыл бұрын
@@jahmezis45 or just colored?
@jahmezis452 жыл бұрын
@@ButtSauce666 lol it's just the color of my tray
@lupusinsidias27833 жыл бұрын
Thanks for the video Ashley :) In addition to the helpful info and demonstration, you also have a great positive energy and you're enjoyable to watch and listen to :) Much love to you! 💚🍄🍄
@BoomerShroomer3 жыл бұрын
Thank you so much for your comment!
@basielotabashie70442 жыл бұрын
You are very kind to teach us and share all information I really appreciate it, thanks a lot Basel
@osiriswills67493 жыл бұрын
Thank you for this video. I am new to growing mushrooms. I just inoculated pf tek jars yesterday. This will be my first method. My next approach will be the Broke Boi tek to shoe box tubs. I will experience my success with this process first before moving to bigger monotubs
@BoomerShroomer3 жыл бұрын
Best of luck! Thanks!
@Six_Foot_Two3 жыл бұрын
How'd it go?!
@coloncarlos2 жыл бұрын
I think I should give classes to plant mushrooms because it explains very very well
@robjacobs23002 жыл бұрын
Awesome!. I've used this video and a couple of others as a reference / online textbook. Fantastic. Thank you!
@lbar24583 жыл бұрын
For people who are having contamination problems. Bring your bulk substrate up to field capacity then put it into an oven cooking bag i use the big turkey bags. Put the bag on a pizza tray and into oven 205 degrees for 2 and half hours. When done let cool and drop this right into bottom of your tote and its already in its liner. Open oven bag pour in colonized grain mix it up trim liner to how u like and bam 💥. Then put tinfoil over top of substrat. In 10-15 days remove tinfoil and allow to fruit
@BoomerShroomer3 жыл бұрын
Cool thank you!
@lbar24583 жыл бұрын
@@BoomerShroomer thank you ma’am for the vid ❤️
@ieatdirtbushcrafthuntingfi40673 жыл бұрын
In my book it states that if your bulk sub goes over 160f for more than a few min then u might as well start over. If you Google it says not to take it over 149f. To keep it between 140-149f for two hrs. I use Willy mycos paturization unit build and bring sub to 135 and shut stove off it climbs to 145 and I put in a cooler for 2 hrs.
@BoomerShroomer3 жыл бұрын
@@ieatdirtbushcrafthuntingfi4067 if you don’t get over 160 degree which is pasteurization temp.. you might not kill off all the bacteria. I would be worried to keep it lower. There are somethings that can live through it. Like slime mold. I’m not expert but that’s what I’ve been reading.
@KenRoach3 жыл бұрын
thank you very much. Lots of info about the starting the bags but very little on fruiting. now I think I'm ready to start growing my own shrooms ;)
@BoomerShroomer3 жыл бұрын
Awesome! You can do it! 😊🍄😊
@pdj263 жыл бұрын
Cute girl talking about growing Mushrooms What's not to like. Great video thank you for sharing👍👍👌👌
@BoomerShroomer3 жыл бұрын
Thank you!
@Cross_Contam3 жыл бұрын
It's cute, you can tell she gets really excited talking mushies.
@mohamedluqmaanramen17093 жыл бұрын
Love your enthusiasm
@BoomerShroomer3 жыл бұрын
Thank you!
@patelnayanaben0076 ай бұрын
Thanks for explaining science about Air flow & evrything
@mollybrowne16314 жыл бұрын
Thank you for the video! So helpful. Everything I needed to know! I'm ready to start growing. 😀
@BoomerShroomer4 жыл бұрын
Thank you!!
@lupusinsidias27833 жыл бұрын
Hey Molly! How's your project coming along? Much love! 💚🍄💚🍄💚
@DeadCrasher3 жыл бұрын
I cant handle so much enthusiasm
@BoomerShroomer3 жыл бұрын
Ok
@pdj263 жыл бұрын
It was the second subscribe message that made me subscribe
@BoomerShroomer3 жыл бұрын
Thank you!
@scottt893 жыл бұрын
usually when they grow only on the outside edges leaving big bald spots it means contamination is coming. fun hobby non the less
@BoomerShroomer3 жыл бұрын
They grew in the middle too.
@friklefrunk7432 ай бұрын
Thank you so much for this video !!!
@user-kb5hb7ej5l2 жыл бұрын
Hey! How did you prepare the substrate?
@spyblox8730 Жыл бұрын
Oh I thought this was just a build video nah this a whole science lesson
@Peter79663 жыл бұрын
Everything good. The only suggestion I'd make is not to paint the bottom. Instead, use black plastic liner in the tup at the same height of your paint. Cutting up a black plastic bag will do. I don't tape the bag to the inside of the tub because when the mycelium colonizes it sticks to the plastic, preventing less side pins.
@BoomerShroomer3 жыл бұрын
Thanks
@MrHobj343 жыл бұрын
Air is a huge trigger. I do the same with a black trash bag. As the mycelium loses water throughout the flush it’ll stay clinged to the bag and prevent air getting down the sides
@jerm_3 жыл бұрын
Learned a ton from this vid thank you so much!
@BoomerShroomer3 жыл бұрын
Sweet! Thank you!
@thetraveller35454 жыл бұрын
Loving these videos! I’m learning a lot. Thanks for sharing
@BoomerShroomer4 жыл бұрын
The traveller thank you!
@happykillmore349 Жыл бұрын
I love how she pronounced coir like "choir", as if it can sing lol
@lilSweeps10 ай бұрын
didn't expect the fruiting mushrooms to be psilocybe cubensis lol did not peg ashley as a psychonaut
@mikekrazer61222 жыл бұрын
Your a great teacher! 👍
@BoomerShroomer2 жыл бұрын
Thank you! 😃
@carlosnavea76503 жыл бұрын
Idk if I missed it, but what ratio did you use of coco and vermiculite for the bulk substrate?
@BoomerShroomer3 жыл бұрын
I use 500grams of Coco coir and 8 and half cups of vermiculite then I add 21 cups of boiling water, wait 24 hours then it should be ready to use!
@stoianovidiu30022 жыл бұрын
doesn't the casing of coco coir have to be sterilized or pasteurized? I've seen coco bricks with small spots of trichoderma on them ... do you have outdoor mushrooms? resistant to plain coco? :)
@mariaf9478 Жыл бұрын
Im also interested in finding out that. Thanks
@beingrealwithneondeon Жыл бұрын
@@mariaf9478 does it have to be? no... nor does substrate for that matter. That being said, as is the case with substrate, NOT pasteurizing the casing layer will exponentially increase likelihood of contam. Therefore, pasteurization is strongly recommended.
@beingrealwithneondeon Жыл бұрын
Yeah, you do want to pasteurize. In fact, I have NEVER heard of this casing tek, let alone seeing this casing tek employed. She does a very good job demonstrating the birthing and casing processes in these videos. However, I DO question her overall myco experience and acumen. She's good, but there are much better mentors out there whose brains I would recommend picking after learning the basics from chick,
@stoianovidiu3002 Жыл бұрын
@@beingrealwithneondeon but why does she mince it with something and putting it there? maybe she would have done a better job demonstrating by skipping one of the steps, not putting it out there like that. I get the feeling that she did it on purpose.again this is not mentoring , this is plain sadism. she didn't forget by mistake, she did it on purpose, this is one nasty one. she even gives the details :)) on how to do it. this is no mentor, this is someone that just sits in front of the camera for some reason , maybe she had some negative outburst on the viewers. it's too specific of a rookie negative outburst.I think she did this just to ruin people's work.
@stoianovidiu3002 Жыл бұрын
@@beingrealwithneondeon SHOUTOUT to everyone DO NOT USE COCO COIR LIKE THAT. Get the information you need from other sources before you proceed with these steps. PASTEURIZATION OF COCO COIR FIRST
@nathanjohnson99742 жыл бұрын
Amazing videos your amazing
@jasongulvartian51632 жыл бұрын
Did you sterilize the coco coir before adding it to the top? Also would Like to know if one should use micro pour tape for mycelium growth and then poly fill for fruiting?
@ButtSauce6662 жыл бұрын
Use propylene pore discs or micro tape
@chickenchaser125cc93 жыл бұрын
Instead of drilling i use a metal ring like for cutting pastry out and heat it up. I press it against the tub. Takes 3 seconds, no cracking.
@BoomerShroomer3 жыл бұрын
Nice good idea!
@luca-draws Жыл бұрын
The polyfil has the same function as micropore tape, correct? Just for a bigger scale i guess it's more useful.
@MrMamklpx2 жыл бұрын
I love her videos.
@BoomerShroomer2 жыл бұрын
Thank you!
@annverkler92832 жыл бұрын
I have already spray painted the bottom 4 inches of my tub black and have a 3lb spawn bag. Should I use all of my spawn bag in one of my 66qt tubs? It's my first time, and I had to return 2 of the 3 spawn bags I inoculated due to holes in the plastic; after waiting two months I am nervous about putting all of my eggs in one "basket", especially after watching your video about making a liner. Also, how many days/weeks is my bulk substrate still sterile and usable? I put the lid on it 2-3 weeks ago when I made the substrate, but because I was going out of town for holiday I decided to wait before starting this process. The bucket has remained sealed the entire time. Thank you for your time, I love your videos!
@heatherrachel84182 жыл бұрын
Great video! Im so confused by your name though lol does Boomer mean something different in the US?
@otacon10243 жыл бұрын
Rest of the video is fine, but 1:42 is bad advice. Light isn't the major factor that leads to side-pinning, the microclimate that forms between the tub and shrinking substrate is. You'll still get sidepins if you simply paint it. What you want to do instead is use a liner (like a trash bag) inside the tub. That way, it will cling to the substrate as it shrinks and prevent (or at least drastically reduce) side-pinning.
@BoomerShroomer3 жыл бұрын
otacon1024 cool thank you.
@BoomerShroomer3 жыл бұрын
otacon1024 I think I’m going to do a side by side comparison to see which way is more effective. I’m curious which way will have a bigger yield. Cause painting the tub seem to definitely prevent side pining in my tubs.
@otacon10243 жыл бұрын
@@BoomerShroomer That's interesting, it's usually ineffective. Could just be the case that your subsequent tubs were dialed in better, surface conditions were better, so there were simply no side pins because of that. That can definitely happen - if you have a properly dialed in monotub, you don't need either a liner or paint to prevent sidepins, they're more of a crutch to push things in your favor in un-ideal conditions. But yes, if you can, absolutely take the scientific approach and do a side-by-side with an unpainted tub, painted tub, and an unpainted tub with a liner. Obviously, make sure all the other variables are the same or as close to it as possible - same tub sizes and design, same substrate type and amount, same mushroom strain, same ambient light levels, misting/fanning amount and schedule (if you mist and fan) etc etc. Would make for a very interesting and useful video as well.
@MartynasShnaresys3 жыл бұрын
Liner can be transparent. For beginners a liner is less complicated than figuring out everything else to perfection and as a plus - helps with cleanup.
@user-kc3re2wn2v Жыл бұрын
After mixing the soil, after 10 heads, why is the bacteria bag prone to green mold?
@biega1003 жыл бұрын
Thanks so much for the informative video ! Helps alot ! Subed
@BoomerShroomer3 жыл бұрын
Thank you!
@LIVFORVVR2 жыл бұрын
I live watching your videos. So is this how u always are? I mean some ppl go all out and practically go full bio hazard is that not necessary?
@nicholasmcmahan29302 жыл бұрын
What is the ratio of spawn bag to substrate? Like how much substrate would I need for a 1.5 lb bag of grain?
@Sweet_TRT2 жыл бұрын
Looks like loads of substrate here. Like 3 to 1. Hopefully we get an answer
@psilocybin14913 жыл бұрын
Thank you for this! It's an amazing help and the way you explained everything was perfect.
@BoomerShroomer3 жыл бұрын
Thank you!
@yesvanevaldovinos59082 жыл бұрын
I love your videos you are supper helpful!👍🏽
@papasplanes.9562 жыл бұрын
You have a heating pad linked. Please explain how you use this. under the substrate? Safe for plastic tubs? Thanks in advance, Kurt
@jb.8993 жыл бұрын
Love your vids thank you
@BoomerShroomer3 жыл бұрын
Thank you!
@Man-EatingMushroom3 жыл бұрын
Hey thank you much! One question I haven’t seen anyone else using that last “casting”? layer I think you called it...the layer of coco coir over the fully colonized bulk+already cased substrate. What’s the purpose aside from adding more humidity? Doesn’t it also then have to be colonized or the fruits push through? I feel like the fruits will only push through on the edges closest to air exchange OR does this help create the best microclimate across the entire surface?! I have 4 more days on two tubs before inducing fruiting so I’m really curious!
@BoomerShroomer3 жыл бұрын
The casing layer basically provides protection for the mycelium and added humidity. My last two tubs I did not add a casing layer and they are doing very well! If you are growing cubes I would recommend NOT using a casing layer. I am not sure what you are growing... But some mushrooms need a casing to grow.
@BoomerShroomer3 жыл бұрын
Also, check on my instagram you can see my tubs that don't have a casing.
@johno6800 Жыл бұрын
Love you! Thanks
@BoomerShroomer Жыл бұрын
Thank you!
@RawTubeTV Жыл бұрын
Do you put the casing layer (coco coir) on without pasteurization???
@guesswho26083 жыл бұрын
Why do you add just a little more substrate on top? Everything is theoretically sterile except for the mycelium. Since that’s already colonized wouldn’t it best protect against whatever might float through those holes? Would it dry the mycelium out before it colonized to its fruiting if it wasn’t covered with something?
@BoomerShroomer3 жыл бұрын
No, you don’t need to cover them with a casting layer. But you can. When you start to fruit just spray them down and expose tot he air and they will start to pin. I’m growing oysters right now and they need a casing layer but next go around with cubs I’m going to try no casing layer and see how it goes.
@cezcast943 жыл бұрын
I have a question. Is there a point in time where you can’t add a casing layer? Is the window for casing only after the tub has colonized? Or can you case down the line like after a 1st flush per say?
@BoomerShroomer3 жыл бұрын
Yes, there is time when you can add a casing when it is most beneficial. But could also add it at anytime and the mushrooms would possibly start to colonize it. I have been adding a casing when I first put them in.. So I mix the spawn an bulk together flatten it down and then add a half in later of bulk as the casing and go from there. I do not add a layer later on.
@gofaraway Жыл бұрын
If I put too many holes will it let too much humidity out ?
@tetrasato41293 жыл бұрын
Hi thank you so much for your video, got a question though, may I ask what is the ratio(weight) of your spawn bag versus the substrate? Thank you!
@BoomerShroomer3 жыл бұрын
I usually use a 3 pound spawn bag and one recipe of bulk substrate in a 66 Qt monotub.
@anthonyortega7542 жыл бұрын
I use a 56qt. or so tub. 2lbs of spawn and 8lb of pasteurized Manure based substrate from Out-Grow. You need between 3-4 inches of spawn/ substrate after laying together. I find that closer to 4in is the best results. I’ve tried many different ratios and the best ones are the ones with 20% spawn grain and 80% pasteurized manure based substrate.
@steverush24902 жыл бұрын
Thanks for the video great explanation 👍👍
@BoomerShroomer2 жыл бұрын
My pleasure!
@rueben10003 жыл бұрын
I cased my PE6 about 4 days ago with a basic 50/50 casing tek. The myc has seemingly begun to colonise the casing instead of start to pin. Is this normal? I have fruiting conditions in my tub and my pest moss/verm is non- nutritious and mostly inert I thought? Thanks
@BoomerShroomer3 жыл бұрын
Yes, that is normal. Start to give it fresh air and it will fruit for you.
@nigelfennell48602 жыл бұрын
Great video, very helpful. Thank you
@BoomerShroomer2 жыл бұрын
Glad it was helpful!
@grant_painter2 жыл бұрын
i lovee this
@harryparkin21793 жыл бұрын
Hey great video! I was wondering if vermiculite would work on its own as a casing layer?
@BoomerShroomer3 жыл бұрын
Yes, it could but coco coir is better.
@KailasaAntwanDarshanChannel3 жыл бұрын
Hello are you able to harvest the mushrooms that are ready to be harvested while others are still growing?
@BoomerShroomer3 жыл бұрын
Yes! Most definitely. I usually have to pick them as they grow.
@nachospopthe3rd5642 жыл бұрын
Hello boomer shroomer! I had a question ? When doing the casing layer field capacity is not the intent correct ? Just a good moist layer
@FukcAUsername Жыл бұрын
Thanks for making such an easy to understand video. Ive known how to grow using growbags for awhile but want to try to get larger flushes.ive been putting the cake on foil on top of perlite in a fc.does anyone know a good place to buy bulk substrate thats ready to go online. im excited to try growing this way
@shaystevens89002 жыл бұрын
Ashley what do you use to colonize your mycelium? I tried uncle ben's 90 sec brown rice to colonize and it worked fine for the most part. All bags fully colonized with 2 bags having some patches of green mold. I would like to use the same method as you because you have been my teacher through this lol. Thanks so much for all thw wonderful and fun knowledge!
@BoomerShroomer2 жыл бұрын
No, don’t use them if they have mold.
@Bothrops542 жыл бұрын
Hello, enjoy your channel, have a question for you..after you mix your colonized grain bag with your bulk substrate and then your substrate in the tub becomes fully colonized and your ready to start the fruiting phase, is it necessary to add that top layer of casing?
@anthonyortega7542 жыл бұрын
Depends on what mushroom you are growing. Some need a higher moisture retention on the surface and some don’t. APES and PES benefit greatly from a non nutrient casing. GT’s, Maza, B+ are very resilient and don’t need casings.
@adelasode2 жыл бұрын
Can I make a mono tub out of kitchen topper-wear?
@BoomerShroomer2 жыл бұрын
Sure
@lunasphinx2 жыл бұрын
Got a bucket, my son used it to wash his car. Would a good cleaning be ok, or just get another bucket?
@BoomerShroomer2 жыл бұрын
Yes you can still use it. Just spray it down with 70% isopropyl before you use it.
@Scorpionwind992 жыл бұрын
Did you do no fanning and misting (neglect tek) for your tubs during fruiting stage ?
@maruDariaJane25 Жыл бұрын
Hey but... If a don't give it ventilation on incubation time of the spawn coweb forms inside 😔😔
@TacoBellLiquidShits3 жыл бұрын
So how much spawn/substrate do you use? For a 66qt tub, it looks like 3lb of spawn and approximately 5lb of substrate based on your previous video. Is this correct?
@BoomerShroomer3 жыл бұрын
That's about right. I would say 2:1 or 2:2. It does not have to be perfect.
@michaelstapleton60733 жыл бұрын
Im guessing youre painting the sides to stop side pins? Doesnt a bin liner cut to shape inside give better results as it shrinks with the sub so stops micro climates?
@BoomerShroomer3 жыл бұрын
Yeah I just use a black liner now and I think it works a lot better.
@vinylostfloyd67804 ай бұрын
Are you using a 46qt monotub for your vids?
@robertsoverhere1 Жыл бұрын
If i have pinning in my spawn bag may i still do this process?
@danielveenboer3 жыл бұрын
Can I use micropore tape instead of polyfill?
@BoomerShroomer3 жыл бұрын
Definitely! Or plastic vents!
@jameshogans17553 жыл бұрын
I have another question. Since the monotub will be sitting in the house, how do you manage spores getting out and into your house? I know if you harvest the mushrooms at the right time, you can reduce the spread of spores. Will the polyfill take care of that?
@BoomerShroomer3 жыл бұрын
I usually try o harvest before their veil breaks and that’s the best way to reduce spores. But I didn’t notice too many spores getting out of the Monotub.
@jameshogans17553 жыл бұрын
@@BoomerShroomer thanks for the quick reply!!!!
@nachospopthe3rd5642 жыл бұрын
Hi Ashley 👋 does the casing layer need to be pasteurized and can it be substituted with vermiculite?
@BoomerShroomer2 жыл бұрын
I don't use a casing anymore. You don't need it.
@nachospopthe3rd5642 жыл бұрын
@@BoomerShroomer neat thanks for the reply I ended up watching your videos on rehydrating cakes and that looks really helpful!! Thabk you so much for the reply
@wearehuman55672 жыл бұрын
I have pinning right now before full colonization? (Maybe 20% thick white on top, fair ‘dusting’ throughout though) haven’t removed lid once. Should I wait few more days to add casing or now start fruiting process?
@BoomerShroomer2 жыл бұрын
No, start to fruit!
@dontbemad4343 жыл бұрын
Hi Ashley can I ask during colonisation phase should I keep me substrate in the dark for up to 1/14 days or do I treat the lighting conditions the same as when the mushrooms are fruiting ,, And what temperature you recommend while in colonisation ,, many thanks
@BoomerShroomer3 жыл бұрын
No, you don't need to keep it i the dark. I usually keep my house around 70-75F all year long. The tub will keep the correct temp and humidity all you need to do is fan out the Co2 at the bottom when you start to fruit. If it gets dry mist the sides. Don't mist directly. It will bruise the mycelium.
@alexagatchel42632 жыл бұрын
Would you recommend the casing layer + sunlight for APE strain?
@paper1981 Жыл бұрын
Do you add lighting to your tubs?
@dsmooth3309 Жыл бұрын
Is it ok to have the lid off for that long
@hunter-kq2pu2 жыл бұрын
at 14:03 would it be better to get the co co coir at field capacity before adding?
@jerryviall64942 жыл бұрын
Great Video
@BoomerShroomer2 жыл бұрын
Thanks!
@TheMindywyss9010 күн бұрын
So even if you’re not really precise on where you drill your holes, it doesn’t really matter 😂
@walkingtheworld69273 жыл бұрын
Nice videos... thanks
@BoomerShroomer3 жыл бұрын
Glad you like them!
@namesjames5193 жыл бұрын
Hi there, LOVE your videos! Can I use the poly fill right from the get go instead of plugs? I made the northern spore mono tub and am ready to put my substrate and grain directly into it to colonize further. Thanks!
@BoomerShroomer3 жыл бұрын
You can. Only problem it is won’t be as humid which may cause them to colonize a little slower. Also use a liner!
@namesjames5193 жыл бұрын
Maybe I’ll wrap Saran Wrap around the tub lol
@namesjames5193 жыл бұрын
Thanks again you’re a legend!
@namesjames5193 жыл бұрын
One more question! I have 6 lbs of spawn is that enough for two tubs? Thinking I might just do one for my first!
@BoomerShroomer3 жыл бұрын
@@namesjames519 I think it might be enough for two. But you will get an even better flush if you put it all in one tub.
@gutierrezeric91312 жыл бұрын
I didn’t tape I went straight to polyfil, everything is great so far tried to put it in fruiting condition just 36 hours ago is it to late to case?
@BoomerShroomer2 жыл бұрын
I wouldn’t case at this point. just let them fruit.
@Tdtsnowflake3 жыл бұрын
New sub good work
@BoomerShroomer3 жыл бұрын
Thank you!
@RNAbarton Жыл бұрын
Thank you so much!!!
@andyballenger384 жыл бұрын
How long after the casting before you started to see them fruit?
@BoomerShroomer4 жыл бұрын
Andy Ballenger days!!
@justinlacy84284 жыл бұрын
Boomer Shroomer is the casing absolutely necessary for fruiting once pinning has started? Also I’ve seen mixed opinions about paint vs bags because of the substrate shrinking vs light that causes pinning... thanks!
@BoomerShroomer4 жыл бұрын
@@justinlacy8428 **UPDATED **No, the casing layer is not absolutely needed. I just heard that the biggest benefit is you will get a more even pinset and it protects the mushrooms from bruising when you mist them. As for painting the tub.... I searched this till I'm blue in the face.... I think the black liner method instead of paint has it's benefits.. cause they say that being air tight can stop pinning around the edges and bottom.. which it does! I would recommend using a liner now! You don't need to paint the bottom anymore. Just use a black liner! This will reduce side pinning all together and give you a nice even pin set throughout the whole monotub! :-) I have a new video coming out that shows the liner process!
@LSPooo2 жыл бұрын
Does the paint the bottom better than the black film you've used in your more recent videos?
@BoomerShroomer2 жыл бұрын
No, painting the bottom does not do anything. You need to a liner.
@gerhardhattingh72323 жыл бұрын
Great vid! At the end do you just leave the jar of the mono tub ajar the whole fruiting period? Or can I close the lid and just open and fan 3 times a day?
@BoomerShroomer3 жыл бұрын
First keep the lid on during the colonization stage (1st 14 days) and the open it up and fan and mist during the fruiting stage. Did I answer your question?
@gerhardhattingh72323 жыл бұрын
@@BoomerShroomer I think you did, really appreciate the response. I know you are busy. I will be following your way of doing things going forward. I just got my GT liquid culture done, next is grain inoculation. Keep up the good work. :)
@mikea67473 жыл бұрын
Hi Ashley, hope all is well. I wanted to get your feedback on using a Hydroponic Humidifier System with HEPA filter. I want to try and reduce the opening of the mono tub and possibly introducing any foreign pathogens. i am also adding ink bird humidity controller. by adding this will i need to still be concerned with Co2 build up in the tub? should I still fan it out? the idea is to make this where i do not have to mess with it often.
@BoomerShroomer3 жыл бұрын
I just checked out that system you got! That pretty cool! Yes, you will still have to be concerned about Co2 at the bottom and will definitely need to fan it out daily. Could you reach out to me on Instagram? I would love to see pictures of your set up!
@mikea67473 жыл бұрын
@@BoomerShroomer ok. Koop. Ty. while waiting on my second attempt of colonization of my spawn. I’m adding a few gadgets to my monotub for my research. So you know last time I I showed you my SB that had that contam. I think I figured out what caused it. This is my guess which I could be wrong For one I used the whole 10cc due I wasn’t sure the quality of the sample and I think all the liquid sat at the bottom and the humidity levels were high which caused a lot of moisture . So now I’ve been rotating the S.B. So the moisture doesn’t sit on the bottom or on one side to long. So far looks seems to be working. A week in and I see some Colonization starting to take place. We will see. As always thanks for the quick replies and feedback. Be well and Talk soon. 🍄❤️
@BoomerShroomer3 жыл бұрын
@@mikea6747 yay that’s exciting!! First sight of mycelium! Congratulations!
@robertschuchardt21462 жыл бұрын
Is it ok to sanitize spawn bag a 2nd time cause my friend opened one and stuck his nasty finger all in my spawn bag
@BoomerShroomer2 жыл бұрын
Maybe… might be a goner.
@yesvanevaldovinos59082 жыл бұрын
Question, do you leave your mono tub in the closet during the whole growing process? I am planning on starting a monotub soon & was planning on making my closet into its place. Was wondering if that’s okay ?
@lilliemullins68902 жыл бұрын
I saw a video of a guy putting it in the closet, but I wouldn't if you don't have the right light fixture to put in there.
@rueben10002 жыл бұрын
Ashley! Have you ever experienced problems with casing with pure coco coir? I just cased with some spare CVG instead of my usual 50/50 casing tek and I’m getting anxious as to what will happen
@BoomerShroomer2 жыл бұрын
No, pure coco is fine.
@shawnwillis75613 жыл бұрын
Have you used uncle ben rice packs to spawn mycelium? I dont have a pressure cooker yet so I used a few of those to help stay sterile. It's been about 7 days since inoculation with spore syringe and its getting pretty fluffy. I need to know when to spawn to bulk and I hear people say it should be almost rock hard, but it's not even close to rock hard where it's almost solid mycelium. Any thoughts? Thanks for your videos!
@BoomerShroomer3 жыл бұрын
I have not used those before but yes it should be a pretty solid block where you need to work pretty hard to break it a part for the montoub process. If you send me a few pics on instagram I can take a look and let you know more information. Also it takes about 30 days to fully colonize a spawn bag depending on how big they are. Hardest part is being patience. :-)
@shawnwillis75613 жыл бұрын
@@BoomerShroomer sorry I dont use Instagram. But it does help to know how hard it should be. I did a break and ahake today and I'll leave it for another week. It's not alot of rice in each of those bags so I'm sure I won't have to wait longer than 3 weeks. Thanks
@BoomerShroomer3 жыл бұрын
@@shawnwillis7561 You could also email me. EndersAsh@gmail.com
@shawnwillis75613 жыл бұрын
@@BoomerShroomer I'm sure I'll have more questions. Thanks!
@12deathguard3 жыл бұрын
You should look up 90 second mycology. He pretty much exclusively use uncle ben rice bags.
@brentwejrowski2 жыл бұрын
Ever try without holes? I’m just beginning and trying to fan and spray daily with no holes
@BoomerShroomer2 жыл бұрын
Sure, you can do an unmodified tub but you'll have to fan it a lot when they start to fruit.
@brentwejrowski2 жыл бұрын
@@BoomerShroomer by the way have you ever watered between the sides when the cake is moving in from the edges so it doesn’t dry up so much? I’m wondering if that might help me since mine seems to dry up easily (very dry here).
@BoomerShroomer2 жыл бұрын
If your tub is dry you can mist the sides of the tub but don’t mist the mycelium directly.
@brentwejrowski2 жыл бұрын
@@BoomerShroomer I was thinking squirting water down the sides where the crack between the cake and the tub is to let some soak into the bottom.
@nathanjohnson99742 жыл бұрын
How do you heat the mono tub and keep humidity high