Boosted Acura TL-S Gets BRAUM Racing Seats!

[@eli9461]

Absolutely love this build. 1 of the Reason why i left mine parked up after the transmission blew the body design on these sedans are absolute perfection love the build cant wait to see you 6mt swap 7:31

[@NickTrelford]

Thanks bro! Completely agreed, these things are aging like fine wine lol can’t wait to get a proper transmission in here💪

[@jcampo8057]

I agree. That’s why I want one so bad!

[@Yeathatsdayes]

The 100mm pulley will definitely make a huge difference in terms of how much linear boost it will push. Keep up the great content💯

[@NickTrelford]

Thats good to hear haha I was wondering if I didn’t go small enough on the pulley size! Thanks bro!!🙌

[@Yeathatsdayes]

@@NickTrelford Yeh mon!!

[@petercastillo4881]

Like the seats definitely better look. Question did you get a check engine light after putting the egr delete?

[@NickTrelford]

Thanks bro! I didn’t get a check engine light, but I’m tuned with Hondata so that likely removes any EGR codes!

[@brandenshervington3817]

Nice TL... Does it have A/C?

[@jonathanarchive]

can’t believe i missed this banger of a video, the seats change the interior so much bet you shaved off a bunch of weight too

[@NickTrelford]

I honestly can’t believe how much the OEM seats weigh, had to have saved at least 50-60lbs each side-I was a little sad about taking the OEM seats out until I carried them down a flight of stairs😂😂😂

[@Isaiah-fy8vw]

damn bro your car is beautiful, i have a tl type s 07 and i haven’t done anything to it but you make me wanna fix it up.

[@NickTrelford]

Thanks bro! A few simple mods really makes these things stand out💪

[@a1ej_]

Nick i love ur car bro but quick question how much % is the front windshield ??

[@NickTrelford]

Thanks bro! Its 20%🙏

[@SunshadeWindowTint]

Hey man I’m thinking of probably getting these seats for my tl. What kind of resistor would i need or what did you use?

[@NickTrelford]

Hey man I used 2.2 Ohm Resistors, 1/4 W, 5%, but they didn’t get rid of the dash light unfortunately-I may try a higher resistance in the spring and see if that works!

[@M5GOD]

Them seats are 🔥. What kind of seats do you have? I need the same one for my 6 speed. Can they recline?

[@NickTrelford]

Thanks bro! They recline and slide-they’re the BRAUM ELITE V2 Series Sport Reclinable Seats in Black Leatherette | Black Suede, here’s the link💪: braumracing.com/products/elite-v2-series-sport-reclinable-seats?variant=41023625625736

[@M5GOD]

@@NickTrelford bro you definitely got my support about to order a set tomorrow.

[@NickTrelford]

Hell yeah bro!! The planted rails on Braum’s site fit perfectly as well, just a bit lower than stock and makes the seats feel very race inspired while still being daily driveable!

[@LV_UA7]

Hell yeah can’t wait to see it wit a proper 6 speed 💪 seats are fire too 🔥🤟

[@NickTrelford]

Me too man it’s gonna completely change the car! Thanks bro🙌

[@Nightfall.]

what are the other black wheels you have?

[@NickTrelford]

The ones I had on the car before are Cosmis MRII’s🤙

[@markrodz2633]

if you remove the tint it will also damage the seat with the heat. the alcantara will fade faster

[@NickTrelford]

Yeah I honestly don’t know if I’m gonna take it off-if I do I’d replace it with a slightly lighter high quality UV tint to protect everything💪

[@Notvisible-yx2to]

Are you running 2.50 exhaust piping or 2.25

[@NickTrelford]

2.5” midpipe to a 2.25” axle back section🤙

[@DavidDumas-tc3ru]

Where Do you put passager belt do you have other bracket on yours base seat

[@NickTrelford]

I remembered as I was uploading this video that I never did anything with it and nobodies been in the passenger seat since to tell me😂 I’ll find a solution this week and likely include it in the next vid

[@DavidDumas-tc3ru]

When your next vidéo i have m'y seat but i dont have idee

[@DatzDP]

My boy looking jacked 😤‼️ Let me find out you be in the gym .. cuz I need to get in there too 🤣

[@NickTrelford]

Thanks bro!💪 Been going 5 days a week since high school-best thing I ever did for myself was get consistent in the gym, it really changes your life as corny as that sounds

[@DatzDP]

@@NickTrelford I have no idea where to start if I start going bro . I just know I wanna build up mussels my arms & legs

[@NickTrelford]

I found that focusing on the basics(heavy compound movements) is the most important part-you’ll see a ton of convoluted information online with a bunch of science backing it, but at the end of the day if you lift heavy and eat right, you’re going to get bigger and stronger, and that’s pretty much how I operate lol! As far as supplements go I’d only recommend creatine(Allmax) and protein(Gold Standard), everything else is a bit of a waste of money imo

[@tishan6357]

Definitely one of my next buy bro 🔥

[@NickTrelford]

Yessir!!🔥 Honestly bro it made such a huge difference to the car and the way it feels when I drive it, it’s genuinely worth it🙌 Also forgot to mention how absurdly heavy the OEM seats are haha

[@tonyharpaul1524]

Were did you order the tl steering wheel from can you please let me know?

[@NickTrelford]

It’s from www.EastDetaling.com ! If you order make sure to use my discount code “EAST595687” and you’ll get 10% off💪

[@tonyharpaul1524]

Thanks for replying I have a 2007 tl type s as well can you tell me what size rims size i need want the rims to be flush with the fender all corner same size rims?

[@NickTrelford]

I run a 18x9.5+22 squared setup with 5mm spacers, and 225/40/18 tires and I think the fitment is perfect!

[@tonyharpaul1524]

@NickTrelford thanks bro appreciate it your tl type s looks good

[@kidanyyys]

Bro what’s your head unit setup?

[@NickTrelford]

The screen is a Pioneer DMH-1500NEX and I have a USB that runs through the centre console for Apple CarPlay💪

[@jasonabril3273]

Cleaner than ever bro 🔥🔥

[@NickTrelford]

Thanks bro!!🙏

[@majerpwnage1]

Just ordered my own East Detailing steering wheel cover (thanks for the discount), excited af to get my TLS as clean as yours one day. You easily have my favorite build out there. Any recommendations for parts to prioritize? I currently have a full exhaust, intake, coil overs, and a dyno tune from Derek at IMW. I'm looking to supercharge sometime soon, but I'm wondering if I should do some more NA stuff first?

[@NickTrelford]

Hell yeah bro! Honestly I pretty much just had a full exhaust before supercharging the car-a lot gets changed with the Gerzy Bear kit so you don’t really need much else! I was thinking about maybe porting my manifold which you could do prior to the supercharger for some good gains, but in all honestly the most important things I can recommend if you don’t have it is surprisingly not performance related, but A-Spec, a good splitter kit like Artwork Bodyshop, and getting you suspension/wheel fitment dialed in-completely changes the look of the car IMO

[@majerpwnage1]

@@NickTrelford 100% want A-Spec next, already have a tab saved for it through aeroworks because I'm struggling to find OEM A-Spec. I'll probably skip the porting and polishing, I've heard the cost isn't worth it for the little bit you'll gain. Can't wait to pop my own gerzy bear supercharger in lol, gonna be a lot of fun

[@chrislizotte6603]

It’s cool don’t get me wrong but it’s a luxury Honda. Why delete the lux

[@NickTrelford]

It’s honestly still very nice to drive! If anything not having ripped seats makes it feel more luxurious haha, TL seats are notorious for ripping.

[@Simple_a4]

Nothing looks better then a car without tints if you ask me take it all of it off

[@NickTrelford]

I agree, my C63 has no tint at all and I love how clean it looks-definitely thinking about it for this one as well! Would probably get harassed by cops a lot less as well

[@Simple_a4]

@@NickTrelford it just gives a modern look +cops will leave you alone lol

[@NickTrelford]

Facts!!

[@XMON888]

Nahhhh

[@moovkue1683]

go e85

[@NickTrelford]

I wish bro, no E85 around here at all:(