Turbo Shopping Go Kart Update (Full EFI Kit)

[@keanesnyder768]

Damn I remember when trouser got lost in the van lol

[@aidenhollingsworth4931]

Which video was that in?

[@yonseth788]

keane snyder lmfao

[@trashymontyy2385]

Same lmao

[@firstnamebunchofnumbers]

Lol

[@daitonmorris2242]

Yea 4 damn years ago

[@CleetusM]

Kyle and I are playing Fortnite right now so I’m claiming “First” haha

[@MadetobeDead]

Lol

[@tacobellworker2003]

Cleatus leroy is the best. He is my idle.

[@paulette_hinai]

IGN?

[@brokein2]

Cleetus you know I beat you! I did it for Dale so don't worry.

[@slowspeed6500]

You guys need Forza!!

[@ryanrhorer205]

Next video "Blew the shopping karts motor" time to K swap it!

[@Big_Floyd]

wildin

[@rhyswerner8749]

Cbr swap it, still a honda 😂

[@heavymetalhydro4529]

Abdulla Bali d16z

[@mal3762]

well he got a spare d16 turbo from the wago. Might as well put it in for the moment LOL

[@mashedpotatoes5323]

Cut the k20 into 1/4th

[@von...]

0:59 my high ass thought you were saying that goldfish was a turtle lolol

[@markopolo7651]

Same bro

[@Zirconium5DRiFT]

Lmaoo

[@maxst2]

psml... ahahaa

[@cashmoney395]

@@yeahnahyeah7872 you're*

[@dylanmounsey7515]

LMFAO SAME

[@brocktyler2818]

*In this episode:* Papa Kyle introduces his pet 🐍 Snake "Trouser", for the new subs. Animal Rights activists trigger warning 😁 The turtles are doing well enjoying their lives in the boosted boiz crib. Kyle shows off the S14 and the MR2, to alleviate the repeated comments regarding their whereabouts. Hold on I got an Oreillys ad... Ok guys alert the local hospital, 🏥the shopping cart is about to break some necks! It's time has come! Kyle does an unboxing vid on the kart parts, but there's a turbo in the box. Travel plans are revealed, Emilio is out of town, Cleetus is congratulated on 1m subs! BoostedBoiz will be reppin in Florida this year again for Cleetus and Cars. Firestone Tires Ad, hold up. 🤷‍♂️ new shop content is coming soon! Got scammed into a double outro, Tune in next time as our hero's journey continues!

[@bad77dragtruck]

I LIKE THIS AND I DON'T KNOW WHY I'M BEING SO LOUD ABOUT THAT.

[@MrLendermanGaming]

but....what did you have for breakfast?

[@MrLendermanGaming]

oh nevermind found the other comments t

[@slippymcstiffyah3117]

Thanks for the run down brock. ❤

[@teriyaki_yams]

I think you’re the real hero

[@brandonr.5318]

I feel like I’m watching an old video. Your snake at the start of the video, and the shopping cart? Is it just me or is this major deja vu

[@evanhasner]

[Charlie walks by] ... what?

[@DrCaptainObvious]

[Charlie walks by[ ... what?

[@lilej8996]

[Charlie walks by] ... what?

[@brocktyler2818]

Hello, for breakfast on this fine Saturday I fired up the grill and had some pancakes with chocolate chips in the center. Loaded on that Log Cabin syrup (NON-sugar free f.y.i. nutritionists), and microwaved a hashbrown on the side extra salt. The pancakes were golden brown and the grill was spittin 🔥flames like the hatch 🚘. Overall a 9.9/10 thanks for reading, -Breakfast Guy

[@K20rotrex]

Brock Tyler Sunday morning 🇬🇧

[@tma4137]

Brock Tyler I remember the first time you wrote one of these I wrote something to the effect that no one cares man, this comment is stupid” lol something like that. But now I think their funny and it’s kinda interesting to read them lol.

[@brocktyler2818]

@@tma4137 welcome to the BB channel! (Breakfast Brotherhood), I sulute you comrade.

[@Matt_Vanepps]

I can’t put my finger on it but Breakfast Guy comments crack me up.

[@wilfredorivera999]

Your da man keep these up

[@BodeVision]

Kyle are you looking for a truck for a tow rig? Ive had quite a few people commenting on my most recent video as i was talking about selling my truck. Please let me know i am in Florida. its a 1997 cummins.

[@BodeVision]

i will also try to send you a message incase you dont see this.

[@prestonfrady6031]

I just commented on this video telling him you had a nice truck for sale..

[@dylanmartin4937]

This

[@realbigveggie]

I was just going to comment about your truck too. Lol

[@ahmadsaunders1405]

what ya want for it

[@turejdmzcdohc4801]

boostedboiz and PFI are killing it on this channel

[@CrazyKxGuy]

The vindication behind this video is insane. I followed because of the shopping cart and realized how hard you go with cars in general over the past year. Keep pushing man, we love what you do.

[@TaylorAmes]

The original reason I subscribed to this channel was for this go kart.

[@DashnCars]

That time Trouser got stuck in the Odyssey. What a nightmare that was.

[@slowspeed6500]

If you end up having problems after connecting a laptop to that ECU(idk what else to call it) it might be that serial to USB converter. I've fought with those things way too much tuning on DSMlink cuz the cheap converters are hit and miss with drivers and different operating systems. I really wanna see a turbo shopping cart so that might save you a headache later on since it's kinda hard to diagnose

[@MrLendermanGaming]

SlowSpeed6 fuck VGA converter s only one I've ever had work was dvi-d to vga

[@esqueue]

You are correct. Serial connectors are becoming more difficult to deal with the newer computers get. They waer extremely to deal with during the windows 3.1- 98 days as computers and laptops actually included serial ports. Last time I used them was on windows 7 when I was programming xbox 360s

[@slowspeed6500]

@@MrLendermanGaming that signal degradation sucks. One of my monitors is setup that way and it looks like shit compared to the HDMI to DVI-D monitor next to it and the displayport to DVI-D next to that one lol this VGA talk is making me miss my old video wall set up, too bad my GPU starts acting up with 4 monitors attached

[@slowspeed6500]

@@esqueue the good old JTAG fun right there lol I still have to deal with serial and parallel ports to configure old network hardware every once in awhile so I keep a good USB-Serial adapter close

[@802Garage]

You should set up one of those 24 hour live cams like people do for puppies, except for the turtles and Trouser. Call it BoostedPetz live. 😂 I'm super psyched for a tuned, EFI, turbo shopping kart. Congrats on the shop!

[@Dtx-Composedmenace]

Finally stuff on the go-kart

[@zackscott3812]

Doesn't kyle just put you in good mood cause hes a genuine person like fr this guy needs more recognition

[@ihatejoze]

Won’t you need a 2 bar sensor? Since atmospheric pressure is 1 bar, you’d need a 2 bar sensor to read anything (i.e. boost pressure) over that.

[@triptechable]

Correct

[@cotyrider3771]

When an engine is running its pulls a vacuum, which is why they read Negitive one bar and positive one bar.

[@killer809829]

He needs a 2 bar technically but since he is in Colorado he should be about to run a few psi due to altitude

[@zokushajames5430]

When measuring pressure,Atmospheric is considered zero.so that map sensor is 1 bar above atmosphere

[@wmgriffin5602]

Map sensors also need to read vacuum, a 1 bar can't read boost.

[@breezeman120]

There has not been one small engine turbo build that has worked out that i've seen. Props if you pull this off

[@ballistic02]

it will barely make 1 psi dont worry about a wastegate bro. the single cylinder exhaust pulse wont allow for proper spooling and exhaust expansion

[@airenthusiast1071]

There are alot of these turbos on even smaller cc engines pushing about 6 psi.

[@nick388chance]

lets see those pets more often ! i remember trouser out in the garden creepin through the grass, the go kart gets you excited man finish that thing up its a mini car you can do that in a day! keep up the amazing work and dont stop! you're videos are my daily routine

[@peyn]

I question how well the turbo setup will do considering Grind Hard Plumbing Co and Warped Perception both saw negative gains from them.

[@AlmostFinished215]

Peyton S. They don’t have a Brent

[@ogspmex9926]

They had a carb

[@Mdudeman13]

Warped perception was trying to use a turbo from a 200hp car on a 3-5~ hp engine, I doubt it was able spool at all. This turbo is designed for 15-20hp engines so it should work good after some thorough tuning from Brent the tuning wizard.

[@airenthusiast1071]

This efi will help alot also.

[@ogspmex9926]

Jadon Wilkerson yea they act like it's still has a carburetor

[@froey198033]

I've been waiting for this turbo shopping cart build for a long time now. Can't wait to see it.

[@chrisprice2113]

Hey kyle bodevision is selling his truck he mentioned it in his last vid 🤘

[@dylanmartin4937]

Cummins > duramax

[@joserotary9636]

Can't wait for you to slap that turbo kit on that shopping cart Kyle, keep up the car content, lol 😂😂😂👍👍👍

[@briankaphengst1235]

Interesting, that little ecu has basically a 24 pin connector for a PC on it.

[@bradcardude]

Probably just for low manufacturing costs. Most of those plugs are probably common

[@MrLendermanGaming]

thought the same but on second thought ^ he's right. like how most phone charger s and controller cords have been glorified usbs for years

[@evanhasner]

So he can lap tune it on Brent's dyno lol

[@williambrewer855]

I'm currently working on my ASE student certification and to have someone explain things where I can understand and enjoy without you even working on it is awesome. Thanks for making this content.

[@eric-janvanroyen9569]

Don't know if you know the guy from the bodevision channel. He's got a truck for sale for ten grand.

[@FlinFlonSk8ers]

I'm beyond excited to see this thing turbo'd!! Always wanted to see a correctly fuel managed turbo go kart it's insane with what you could do with this now that you have the efi kit! I'll be waiting !

[@jacobgarcia5043]

Remember when the snake got stuck in the floor board of the minivan

[@crossstarling2452]

Boostedboiz is back not that you ever left but im excited and ready to watch all the new content and watch the channel continue building 💪🏼

[@efboiz5302]

Ever wanted to know how to make weed brownies? Well today is your lucky day! First, DO NOT use regs, mids, or trimmings, it will taste pretty bad. Have some self respect and get some nice dankety dank um-key? Dosing: Alright, if you have a low tolerance or no tolerance, and do it efficiently, then for 16 doses a pan you want probably 2 GRAMS MAX, just one if you only want to be nicely high. I know you are thinking "that seems low." Remember many edibles are murderously strong, and that once you get to "extremely stoned" you don't usually get any higher. If you have a decent tolerance, then maybe 4 grams, after that I would consider taking a T break, but otherwise a gram for every bowl you smoke to get high. Either vegetable oil or butter will work just fine. Neither is really better. Butter does taste a bit better but also burns more easily. With 2-4 grams of weed, the oil will take about 20 min, 30 max. I am not sure why people always say an hour or more, I suppose an ounce might take that long. KEEP THE OIL MOVING AT ALL TIMES. Usually it gives off a flowery odor at first, when this goes away it is likely ready. The proper temperature for the oil is the same as what water boils at. Usually this is about medium to low heat. If you are not sure, heat the pot holding the oil in a larger pot of boiling water (double boiling). If you burn the oil more than very slightly you are fucked! Usually this occurs at the high end of the medium range or if you don't keep the oil moving. The oil shouldn't really be simmering, but close to doing so. You will start to notice the smell changing and the weed particles getting dark burn marks if it is too high. Turn down the heat immediately if so because in a few minutes that shit will be ruined and the batch will taste disgusting (kinda like resin and chocolate) folks. Not filtering out the weed, washing it with more oil and filtering again is terrible form. Use a sieve with fine holes (no coffee filters). You cook the canna-oil with half of the total volume, then after filtering pour the rest over the weed through the sieve and into the pot (hehe) to rinse. You do not want pieces of leaves and stems in your brownie. Use a small pot, the oil sticks to the sides somewhat. Always add the optional extra egg to the mix for cake-like brownies. This helps in a number of ways. It makes the batter easy to remove completely from the bowl. Makes mixing easier. Makes the batter evenly fill the pan without much work. Makes the brownies easier to cut (with less crumbs) and decreases the chance you will overcook them into oblivion (burnt brownies don't get you very high). Don't use a whisk to mix it. You want to get every last bit of batter, use a mixing utensil that fits the contours of the bowl to get all that batter, about a fourth of it gets stuck to the side of the bowl after you pour it. Don't forget the nonstick spray. If you do then the brownies will get tore up when you try to remove them. If you have no spray then a piece of paper towel dipped in oil is a good way to coat the pan. Use the what's stuck to the pot you cooked the oil in for bonus points. Set the oven before you are done mixing for 365 F. It usually says 350 on the package, which will still work pretty well, but 365 is exactly the temperature at which the most thc will be activated. Usually it takes maybe a minute or two less like this too. Maybe 31min in a 11-14in dish. Set the damn timer! And of course store them in a zip-lock bag afterwards, they go stale (but still work) in a few days otherwise. Also DON'T PUT THEM WHERE YOUR PET CAN REACH THEM. I once knew a kid who killed his dog this way with a batch I sold him, use your head.

[@melapelas8465]

Make a video

[@SkylineBNR34]

You could save some time by buying hash oil so you don't have to worry about the plant material. Just decarb it in a oven safe dish with some parchment paper. Plus they taste better and get you higher.

[@dylanmounsey7515]

Don’t forget to decarboxylate

[@1337bG01]

Kyle I hope you see this! 2:25 ahhh finally! I made a comment like a year ago saying you shouldn't feed Trouser in his terrarium as it teaches him that's where he's meant to strike/attack his prey. It makes pet snakes more prone to bite their owners, which is why you always feed them in a separate, specific container. Since it's been 3 years it's going to be really hard to re-train him, but just keep going at it and he'll learn, they're a smart species. If he really refuses to eat outside his terrarium, buy a new one. No joke. Make it slightly larger, change the setup of the interior, then put him in there. Then use the old terrarium as his feeding tank, but remove everything you had inside of it.

[@alejandroschmitt13]

1bar map is 14.7 and thats is atmosphere pressure its not gonna read any boost

[@wmgriffin5602]

I'm surprised I had to scroll this far to see anyone commenting about that

[@yeahnahyeah7872]

How u know his atmospheric pressure... could be 3 or 4 psi and he can read up to 10???? Depending on elevation but yeah i run 2 bar map so do most other lads here in aus that dont pump over 10-15 pound

[@osiris07lv]

14.7 is the pressure at sea level. Kyles elevation is around 5200 ft so around 11 or 12 psi

[@ClumsyCars]

He should just use a factory b/d map sensor, they are 1.5 bar.

[@mikeymasi]

He'll need to read absolute pressure whereby perfect vacuum is 0psi and atmospheric is 14.7psi (at sea level). If he can at least get it to boost enough to keep it around 15psi (absolute) then will chug along nicely

[@normalguyreviews7102]

Yes we def want to see the cart get turbo'd and can't wait for new updates on the new hq! Thanks for the update Kyle

[@dontlikemike]

Finally. been waiting on the cart for a while :D

[@Shaggybuilt]

Hey Kyle love the videos. Just a tip from a fellow reptile keeper, a good way to keep your snake from eyeing you hand like food is to start feeding him the mice with tongs. That was he doesnt look at your hand as a source of food.

[@tacobellworker2003]

What up kyle? Like always glade to see the upload. When can i get a ride alonf in the hatch?

[@montyberg6296]

tacobell worker hook it up with that taco bell

[@B18bVtec]

I always wondered what you did with that small turbo, I'm glad you're going to try to make it work.. hope that fan is watching this!!

[@brennan7085]

I literally commented about the shopping cart this morning...

[@dustinspurlin7378]

Love the shopping go cart vlogs dude the real reason why I got into the boostedboiz

[@itzomar2578]

Aye early squad where you at ?

[@camdavies5530]

Oh their mobbing with the notification squadron & the GOOF squadron ffs

[@bryanhinton7131]

This is the reason i started watching you. Also the reason i started geting carts from walmart to build my own fleet

[@brandonruhl4525]

From a 7.3 owner, i’d say get a 7.3 or a 5.9 cummins. Ford, chevy, and dodge all have their own problems it’s just basically down to which you prefer and like more.

[@thegenerousdegenerate9395]

Hell ya! This kart is how i found this channel! Turns out the channel is good at everything else too! lol Stoked to see the shop come together as well. Keep on killin' it man!

[@MrLendermanGaming]

Mann. I remember whenyou went and got that from yo moms house. little ghetto tread wheels and shit. dopest build here

[@evanhasner]

The tread wheels are new..... it used to have floppy unbalanced go cart slicks bud...

[@MrLendermanGaming]

no no no.wqyy back. wayyy wayyy back. before the slicks. before he redid the front steering. when he went and got that cart. the front wheels where like shopping cart casters with real tire tread screwed to them I'll grab a link and timestamp quick. he talked about it and how ghetto it was lol

[@MrLendermanGaming]

kzbin.info/www/bejne/e4q4fahsrpt_i5Y not sure if he talks about in this o e but you can see them and find the video where he explains it fr.there

[@MrLendermanGaming]

kzbin.info/www/bejne/jIjPm6OPiMR6fJo if not I'm that one there's a playlist of all the videos somewhere just not made by Kyle

[@Beardest_Fishing]

The life of a playboy KZbin auto based channel. Flying here for this meet, flying back for a day then loading up for this event cross country then coming back and building this car to go to this event right after. You done "come up" a long way since I started watching the adventures of the BoostedBoiz!

[@user-vh4dm1uw9l]

Primeroo!! Saludos desde argentina bro!

[@IDABAYAREA650I]

123 456 *....WOT ?*

[@TheTommer777]

Bigote

[@hiddenkard3101]

그래 ㅇㅈ 마자요..

[@revitupautomotive]

Cant wait for the new shop setting up and moving in, go boys!

[@connortravis6430]

Get a Cummins or powerstroke not a duramax

[@ahapainenpaavo6010]

I think we can all agree that we've all been secretly waiting for this. drift it in the snow like last year! :D

[@jackkuerbitz3355]

Get a 7.3 for the money you want to spend you’ll get a beat duramax and you can get a really nice 7.3 powerstroke for 10 grand

[@jakekology1756]

Its possible to find a decent Dmax for around 10k cash money, I wouldn't go for anything with over 150k miles though.. my old 7.3 still ran mint with over 265k on her, cabs are nice but you'll find Dmax cabs are much nicer for longer trips, and the allison auto is nice, some people like em some don't, depending on year of truck he said 01-04 I'm sure he'd enjoy it

[@wmgriffin5602]

Plus if he gets a Duramax Wyatt can help him with the problems he's bound to have.

[@jackkuerbitz3355]

For sure fellas not knocking the duramaxs just where i am there expensive as hell that Allison is way better for long ass trips for sure and i forgot about Wyatt lol

[@jakekology1756]

I hear that, they're expensive to get a hold of and maintain here in New England as well, & hellyea nice cruising rigs

[@alexbradley7517]

Jack Kuerbitz fuck no, 6.0 life

[@Cthenerd88]

Love the shopping cart!!! Can't wait til you guys have the shop up and running!

[@teamg25]

get a ford powerstroke 7.3

[@esqueue]

The kart was the reason why I joined this channel. I eventually fell in love with everything else though.

[@brokein2]

FIRST, LOVE YOU KYLE

[@mishdomingo6348]

YES PLEASE, can't wait to see the turbo shopping cart

[@TheQuicksap]

The shopping cart is siick!! get that turbo on there

[@ThatHoodlum19]

Can't go wrong with a bit of Shopping go kart content!

[@shakethaspot6301]

The kart throttle body is sf tiny 🤗👍 thanks for the update. I can’t wait to see you n Brent moved in to the new shop.

[@destin6041]

This is sick. Can’t wait to see this build.

[@GeppettoF17M]

This is a fun project! New shop is well earned Boistedboys

[@dx4095]

the shopping cart is gonna be legit , hopefully the ecu will be able to get a custom tune would love to see brent sprinkle some PFI sauce

[@HaecceityMikey]

Keep killing it Kyle. I'm in Wisconsin and a big fan. Love every video, Emilio is a great guy and what a chill group you guys are. Hope y'all have a great 2019

[@darrencorbit5994]

I haven't been this excited to watch a boostedboiz video in a while!

[@EdWolfram]

Came for the very first kart video stayed for the K's. Glad you got to work on it will come in handy for rainy day meets.

[@EdWolfram]

Also, you want a pressure reg for the oil feed for the turbo. They take so little pressure and volume most people blow the seals out before ever getting the turbo spooling. cough (Grind Hard Pluming ) cough.

[@Moecean]

Perfect timing. Thank you for more content too we all appreciate it

[@caveman69_]

i've been dying to see that go kart get turbo'd since that fan sent you the little turbo!!

[@BradGryphonn]

Great to see the Kart again Kyle. Also, I'm hanging out to see you folks in the new shed.

[@DWB343]

Bro you're so close to getting it turbo'd. I can't wait, I wanna see them wheelies 💪👆💯

[@joeshmo2473]

TBH Bro I only watch your vids for the shopping kart go kart. Its your sickest build to date.

[@Sloppyjalopy123]

That's a bad ass system, wasn't aware they made such a complete solution. Someday you should do a quick video on everything it took to build that kart, and prices.

[@notmyrealname8686]

It would be great to see a compilation vid of your favourite street races in the hatch just so I can show people how serious that car is!

[@Califormula]

That mini boost life. . .SICK!

[@DjayLSD]

IT WAS ABOUT FREAKING TIME KYLE!!!!

[@stonebone1179]

Been following so long that the shopping cart is still new to the channel to me. Been here since yall hooned the parts wago

[@zapple8286]

I stuck around to see the build and I'm glade I stayed, I totally forgot about the kart build

[@anything_under_the_sun91]

Holy shit been a O.G subscriber and i am finally awake for a video that was just posted lol you guys are doing big things ...happy for you and the guys at PFI

[@landtowater_2747]

The go kart is what brought me to your channel

[@draconidy]

hells yeah finally went efi, cant wait to see this thing boosted

[@mudlover4379]

The shit you guys do is sweet. I wish I had more friends like you guys. Motor heads for life

[@HUBBABUBBADOOPYDOOP]

Kyle- now days, it isn't so much about the "Hardware" of a simple Jetronic EFI system; it's mainly in the software. That tiny ECU packs way more RAM and ROM than you think. There's probably a 9v battery needed to, for "keep alive memory". That wiring harness looks like the company repurposes old PC stuff (ATX, Molex, I/O) so it's very reliable. You Boiz will have awesome power with that cart. That's better than any "pit bike" and easily fits in the Rowdessy.

[@Gidanski]

1 bar map sensor is for up to 1 atmosphere, as in NA, MAP sensore are absolute so it will do 1 bar from 0 atmospheres. You'll need a 2 bar map sensor to read boost, full vac to 0, then 1 bar of boost on top.

[@WildEngineering]

I first subbed to this channel because of the go kart. Ive been waiting for the turbo the whole time xD

[@albionkennels8306]

Finalllyyyy shopping kart vids f yeahhh!!!

[@jimmytonga95]

I can’t wait for shopping cart 2 step!

[@Druls8]

Appreciate the update man,about the shopping cart I wanna see a nice sturdy build :) I don't mind waiting a couple of weeks :D

[@sliminus92]

the shopping gokart and the wago i want to see more of. 2 best "cars" u have. cant wait...

[@lilthrowednunez1611]

This kart is the reason I started watching

[@teemun3979]

I'm over here dying for MR2 videos.

[@paintballinfoo]

7.3 F250 man. Best tow rig truck ever and the prices are finally coming down!

[@DickVanNiggz]

paintballinfoo they’re coming down for a reason lol

[@ConLLee]

I’m hella stoked for this build. Just a little worried about it blowing up while driving it. Engine is literally 6 inches from your back. But we all know that isn’t stopping Kyle

[@hamsterh2b53]

Can’t wait to see this thing running. Hey I also was wondering what you have in the hatch besides a big turbo. What cams bored? Injector size etc.

[@levischittlord6558]

That goldfish looks like a feeder that survived and took over the tank. Make like a throat restrictor for whatever "large" wastegate you plan to run. Also look into standard alone oil systems like they do for rear mounted turbos.

[@soupu]

not even 5 seconds in and kyle is already showing us his trousersnake

[@sahilsingh193]

Can't wait to see the shopping cart with the turbo on

[@gumbygrom8436]

Gotta watch boosted boiz before morning horizion 4. Always a good sunday

[@cky2k244]

Thanks for the update on the reptiles!

[@TheDJFoxTrot]

EFI and a turbo? Feckin dooooo ittttt!!

[@sugarbombs6884]

YES MORE SHOPPING CART STUFF PLEASE!

[@turejdmzcdohc4801]

great content can't wait to see the new shop and all the content you guys are going to have might just have to send my EF hatch out there to get the turbo kit and everything else done before the new racing season starts next year