Twin Turbo Mr2 Is Back Together and Ready To Race!

[@lexus_offroad_adventures]

The Boiz are spoiling us with all these uploads! Keep em coming

[@Fix-It-Jeff]

That looks like an expensive box

[@thebarkingmouse]

Rather than red loctite, you might want rocksett. Is what I use on flash hiders and suppressor adapters. It can handle the heat and is chemically stable. Also when torquing, I always torque it to click at least twice. Torque. Let it sit for a few seconds, torque something else if you need to, come back to it & torque it again. Then stake. Peace of mind. Of course I'm not working on cars, I'm working on guns. But having it correctly torque barrel nut can be a life or death issue.

[@ashermorales8276]

I originally read your comment wrong and I though you were making a pun saying that the *boosted* boiz were *spooling* is with uploads

[@905whips8]

TURBO THE J SERIES BUGGY 😁😂🔥

[@Brock_Landers]

MosDef!

[@nathandonohue21]

You should mess with your cut times shouldn't be wearing out that fast I would think

[@Baksteen_Express]

Very true, shouldn't break like that at that torque level

[@7_7_5]

Yeah, something definetly isnt right, those dogs look like they got hit pretty hard/power too early

[@wheeln24-79]

Sounded like that trans had other issues while they were figuring the setup out. He mentioned detents coming loose and other things not to mention that big nut that was loose when they opened it up. Hopefully this one lasts him a couple seasons.

[@MJTAUTOMOTIVE]

It was because of the lay shaft nut coming loose that caused everything to be out of alignment. Also from day one the detente were never adjusted correctly and with a dog box they are really critical because there is no synchro ring in there like a standard transmission.

[@Jcarney87]

It would if you’re barely pulling the shifter and it’s chewing the dogs in between gears ...

[@hoost3056]

King Kyle....TransSlayer! I bet even Quaife said, "How the hell did he break our stuff so quick?! Better use him for quality control and R&D"

[@imalec]

Get it put together right then test it on him.

[@spankthemonkey3437]

Brother Django Dakota it broke again just now

[@joshmeyer5280]

@@spankthemonkey3437 seriously?

[@Josh-qz3ki]

Josh Meyer he’s just spreading fake shit

[@Liberty46]

@@spankthemonkey3437 what?

[@jonnoMoto]

Make sure to release the tension on the torque wrench once you've finished

[@jamesmcivor340]

I was just debating this with myself today

[@pw383426]

I doubt he left it loaded that would be a rookie move

[@RadDadisRad]

Also store in the same environment you’ll be working. They are sensitive to temperature changes.

[@rsharney1111]

@@RadDadisRad never heard that but makes sense.

[@otm646]

It's inexpensive enough, I have it tested once a year for a quick calibration check.

[@jajabinksGG]

Kyles gf : “destroy me like you destroy 3rd gear” 🤣🤣

[@popwarhomie]

Ooof.

[@jacobwebb8818]

It was 4th gear...

[@mahmoudsalah6418]

Oh god thats bad because he misses every 3rd gear ever 😂😂😂😂😂😂

[@brandonfloyd6321]

Was gonna like but its at 69 likes

[@DonnieX6]

"Kyle, do you miss me as much as you miss 3rd gear??? :*"

[@sketchmcgraw848]

"MONTH OF FRE...... wait wrong channel....MONTH OF BOOST"

[@carsnquads]

Yea yea some one commented that on the last video..

[@802Garage]

Sequential September?

[@PeaceManBro]

@@carsnquads Someone commented this on a video too... weird

[@seanohutton3185]

Let us Thank You for helping out Tom, we appreciate your contribution to what we watch. People did say how much you worked, just not much appreciation personally, but us viewers sure do!.

[@Apgreimelgoogle]

We need to have MONTH OF VTEC!

[@ehmjauhh5495]

Month of boost

[@spankthemonkey3437]

Devin Vanvliet eat taco Bell it'll give you sound and boost

[@bubbabrown6917]

I can hear it now

[@gtray7]

Umm... didn’t that start with the Smart Kar?

[@jespernilsson0303]

Boosted june

[@BIGSMOKE-bl2lq]

Now shift it with authority and take your hand off after every shift

[@freedomfox8183]

Yeah I said something in the video when he told us he got it super common problem wearing it out fast Adam LZ did it twice in his FD car the harder you shift the better

[@Liberty46]

do you guys have any idea why the shift lever is so long? wouldn't it be easier if it was shorter?

[@2kbaby924]

Liberty no more leverage to slam into gear

[@Ressurrectinn]

@@Liberty46longer length = more leverage

[@swaffle7979]

@@Ressurrectinn But the problem is that longer means you need to travel farther to shift and the problem is shifting too slowly. It would probably be better to shorten it and just pull like he means it

[@cody55443322111]

Love seeing Tom in the videos, seems like a really good dude

[@andrejaeschke3415]

Everytime i see that intercooler i think it needs a scoop from the bonet or even some fans... How is that thing getting airflow?

[@kinoderking9584]

next time you drive down the road, stick you're head under the car then get back to us on that air flow.

[@MJTAUTOMOTIVE]

You don't need a scoop from the top it flows from under the car into the engine bay. If the air came from a scoop on the hood it would be pushing all the hot air from the turbos and engine through the intercooler. A little duct at the front edge of the intercooler underneath would be all it needs when racing. But when he does race week a couple of 10 inch thermo fans on the top side of the intercooler to draw air through it when traveling at low speeds on the street. But the AEM ecu can adjust the power and boost when the inlet temps are to high.

[@ashermorales8276]

Andre Jaeschke every time they do a wheelie the under side of the car is exposed to air flow. (I’m not being serious)

[@chrisabbott7657]

The motor is in the rear. And air is all around.

[@SamFBM]

Side ducts , airflow over the body, airflow in the front grill

[@brianm6117]

So, I've destroyed, torn down, and reassembled my fair share of FWD transmissions, specifically Mitsubishi, but the 5th gear set up is similar. What I finally learned to do to be able to properly torque the stake nuts is to use a penny between the gears. The copper is soft enough that it will deform and not damage the gears, but it will block the gears from turning so you can get to that torque spec. Once tight you just back the gear up and pull the now smashed penny back out. Works every time.

[@ryansirko4437]

Your forgot to thank tom! He was like waiting for you to after you told milo thanks lol

[@ChipsNeeson]

I don't think Tom gives a shit. He just likes helping and getting stuff done.

[@TheTyisawesome]

Lol noticed that too, Tom just standing there and Kyle doesn't say anything else.

[@amirmurray9916]

Lol i booked that ...how you gonna only thnk one person ??

[@jrbaconcheez]

holy shit these guys can rebuild transmissions. Best channel. And Kyle's can-do attitude is so infectious..

[@THEMECHANICOCMissionViejo]

Glad you guys dont get discouraged when things break. Thats how you learn. Every car guy can tell you stories of dumb mistakes weve made and kept going and now were experts. You cant be an expert with out first being a novice. KEEP GOING!

[@Mr05sti]

I don't wanna break it!... WTF am i watching this channel for?... Fucking send it man!

[@tedbear631]

22:00 YESSSSSSSSSSSS I just bought one wanted to support the chan for sooooo long and I get one of the last of the sick MR2 retro shirts!!! Can't wait to rock it!!! \m/

[@oldfart43311]

Great to see the MR2 back! Milo, Tom and Emilio along with all the rest of you guys Thank You.

[@Danger-Dave]

MR2 is back and hope to see you get her cuts dialed in! Love that Tom and Milo are helping you guys... I need Tom's contact info so when they get back to Nashville I can hit him up for some local work I need done on a couple of projects.

[@802Garage]

If you break another one, you might have enough spare gears to build another sequential! XD Also we need to know more about this magical Milo fellow. Seems very helpful! Thanks to Matt as well.

[@jaredthisdelle5617]

Right on Tom a millo great job guys

[@ripostethis4374]

I like that Tom doesn't fuck around with dirt, in the Prelude video he was wiping down the rad hoses and everything, now he was going in and getting every little thing that shouldn't be there with the paper towel. That's what I like to see.

[@brandon.schicago91]

Discipline equals freedom, truest words every spoken. The Hondaru is the only clean car that has come out of this shop to date. Everything else is always half finished. Spend $25K on engine/trans build... won’t take an hour to dial in interior. Pay monthly to rent a shop, won’t take an hour a week to clean it. It’s insanity to me. Matt from Obsessed Garage needs to visit this shop and put them through boot camp. Watching for years and always hoping one video will be titled... We decided to clean and organize our lives”

[@thebarkingmouse]

Rather than red loctite,you might want rocksett. Is what I use on flash hiders and suppressor adapters. It can handle the heat and is chemically stable. Also when torquing, I always torque it to click at least twice. Torque. Let it sit for a few seconds, torque something else if you need to, come back to it & torque it again. Then stake. Peace of mind. Of course I'm not working on cars, I'm working on guns. But having it correctly torque barrel nut can be a life or death issue.

[@TurbineResearch]

So sequential transmissions are 10k and only good for a few passes ? Sounds worth it 🤣

[@alpha6ix222]

s14sean yea if you shift it like you are scared of it, then yes things won’t last long

[@fastballfilms4214]

No it’s cuz Kyle uses an impact gun to torque bolts down instead of an actual torque wrench. Go watch the video of him putting the sequential together.

[@brutalbasspro]

I dont think it was torqued properly the boys screw up more expensive parts by not using a torque wrwnch than I've ever bought.

[@Nebbia_affaraccimiei]

he didn't explain WHAT went wrong and WHY.

[@jkflorida]

I was about to say the same thing. How do you blow up and trash almost every gear in less than 1000 miles.

[@flyingmunk8956]

Kyle: gear missing a couple teeth. Me: like half the gear is gone. Kyle: bearing barley got split. Me: its really F N split. In my mind: man when your used to blowing shit up i guess

[@davidvalenzuela2186]

Twin Turbo MR-2 Is Back Together and Ready To Race!

[@lDDD587]

@ 6:50 using pry bars for the press, the boostedboiz know how to make it work!

[@rear3chelon83]

Look forward too these vids every day!

[@pFbSpecV]

Awesome to see the mr2 back up and running!!

[@fernandobanuelos4965]

Man you guys got the MR2 running and the Prelude that's awesome

[@brians48now]

RMRW is going to be fantastic again with Cleet and the boys and now Kyle driving one too.

[@tomlompa6598]

Kyle, if that high torque is that important. Torque it, then let it rest for at least an hour or two, then torque it again. I can almost guarantee that it'll tighten a bit more after the parts have chance to "settle" for a while. You can do this a few times or until the nuts stop moving. You might be suprised at how much the pressure changes after the unit "settles".

[@eddiepatterson5025]

Glad to see the MR2 back up and running

[@2011CamaroLT]

"You think you can torque it to that, 140? Those look like a 120 right there" hahaha

[@dandel351]

Good luck going forward with the MR2 . I suppose it will be baby steps getting everything dialed in on the gearbox this time. Have fun stay safe and I can't wait to see a side by side run with the Rowdessy.

[@petrolhead8851]

Crazy! Kyle has a rwd making 1000+whp, a 1000+whp fwd, and a 1000+ capable awd car/minivan ...he’s got best of all worlds. All making over 1000whp lol

[@KillaMTB]

Loving all the content since you came bk from Florida you been fixing everything bk up can’t wait to see this you really need to make the prelude AWD. Who else would love to see that happen?

[@desleallum248]

Great to see the prelude and the mr2 back up and ready to rumble..!!! Level BOOST ON THE LOOSE..!!! 😎👍

[@BLAzExRELoADEd]

All my favorite KZbinrs are making 20min+ videos for my 12hr workday with absolute dead job 👌🏼

[@jonsmith7426]

One of the fastest mr2s on the planet.. Let that sink in

[@saultineo2704]

Hahhhahaha the 120 arms was the funniest 😂 I’m dying 💀

[@gtaallday]

As soon as I see an upload instant click

[@popbang240sx9]

Seeing everything just slide in was just satisfying af

[@johnwar9653]

Yall are in the comments acting like he should have done this perfectly the first time. The man took on a sequential transmission for the first time. You live and you learn. Especially from your mistakes. Sheesh.

[@exoticnoise420]

Hell yeah Tom and Milo. Getting shit done.

[@quickdeuce]

Re the trans rework,, it was good that you're working with a team that "know" what you needed [bearings] even though you didn't order the parts. Note for sll of us, when we're putting a build together it pays to select supplier/vendors who "know" what they're doing.

[@samsonian]

Such satisfying THUNKs when that trans goes together. Somehow that’s such a beautiful sound...

[@johnathonlolley9158]

A fun drinking game: take a shot every time he says gear.

[@boxedfender4810]

nobody said he was a professional tv host lol

[@jdm_obsession]

I drank myself to death

[@josechavolla9307]

I’m getting too f up

[@myfavoritemartian1]

I usta take a drink wen anyone said, "DUDE"!

[@daltonboy7154]

I'm 3 minutes in and fucking WRECKED!!!!

[@bgd5339]

Kyle: "You want to take this real quick!" Brent: "Yeah I'd love to hold it!" 😅🤣😂

[@baxrok2.]

I love the MR2! Nice job guys.

[@bobgreene5460]

Impressed with rebuild, Milo and Tom was on their game I'm sure. Small request ; the cockpit of the MR2 should get a Detailed type going over... Show Car!! to all your fans

[@memphisreigns1498]

Good job boyz

[@lilmike1780]

All the cars are almost ready!!!!!!!!

[@frankenelimtangco2400]

'The more you break, the more you learn' FACTS! 👍🏻

[@gixxernut8021]

She is a record breaking mr2 ! Great job guys ! Let’s get it!

[@d.c.dawkins5470]

Some guys in Australia may have something to say about that.

[@williamhoffman1225]

Kyle: you guys ready Makes click on torque Tom: oooo the beaches that way 🤣🤣🤣🤣🤣 I can't with y'all

[@jamesdimpel1720]

Glad to see ya back on the track.

[@Adrellias]

Hell yeah 🤘 Good job getting it back together 😊 love seeing Tod and Milo as as well. Boosted boiz and Pfi family growing 😊

[@straylgk5497]

20:25 Brent is so happy hahah

[@zacharyballew4320]

It is 100% pure fucking gold reading a bunch of people comment as if they have ever touched a sequential in the first place lmao, let alone put one together. They want to throw shade and act like they automatically know better because they watch KZbin vids bro lmfao. Acting as if mistakes don't happen to the best and most knowledgeable and experienced people is just another way of showing your ignorance. First race ready RWD car, first time owning/racing a sequential, first time assembling a sequential, it's called a learning curve and you have to sometimes make mistakes to better understand your capabilities. It's a shame The Rona didn't take more dumb people out.

[@masonshafer811]

It’s not needed to go faster but imagine the mr2 getting repainted white but a really nice deep pearl white!! Trevor could do it he’s and amazing painter! That would look amazing

[@haroldhoyt3401]

Let’s gooo it’s race season boys

[@jeremypatton5804]

I said It in Houston when I met you at "cleet n cars", Slipper clutch and 8.8 pass!! love this car and all you guys!

[@shigerunakahara6995]

Love your videos guy hope you post one everyday!!!!

[@sandflesh]

straight cut gears require rpm matching in order to shift properly. you have to get it to rev up on down shifts, and add more time on the strain gauge, in order for the gears to match before an upshift. get someone who has there CDL and driven an 18 speed semi to teach you how to drive your car. or google how to shift with no clutch.

[@Buchta179]

Gotta yank that shifter harder and increase the cut times slightly. Getting back into power with the dogs barely engaged is what ate them up like that.

[@therallycarspotter]

What Quaife said about the failure on the gears ?

[@Quagmire925]

They said if he had assembled it properly the first time it would still be ok and saved him a load of money!

[@JakeGreen86]

@@Quagmire925 Exactly.. him and Emilio did not torque the nut down that backed off and wrecked everything.. "is good bro"

[@bryarharrison2922]

Lol that is the story of my life " you gotta fail to learn". Keep up the good work Kyle and the boiz.

[@84gssteve]

Cool stuff, failures suck but in depth tech work is interesting content. For smaller stuff like motorcycle and utility engines, I use an old copper penny between the gears to hold everything in place. Works good, 1 cent equals the cheapest tool ever!

[@ryanrezi]

Such a satisfying sound when those gears clunk down into place.

[@SalvageBoiz]

Let’s go boys !

[@chubbzcornner9900]

Brent is everywhere he's like a ghost he just sneak in the videos lol

[@twilightbark7166]

That’s cause he’s the one who always breaks kyles stuff when he’s not around

[@NietVerantwoordelijkTV]

Tom is a absolute legend!

[@usedparts352]

"The beach is that way" had me cracking up.

[@MJTAUTOMOTIVE]

Tom is the real MVP.

[@dynamoz5191]

*flash backs to when the nut didn't click last time*

[@alexchunkmiller1817]

Boooom I just ordered a OG MR2Turbo shirt, thank you. So awesome to see you guy's got the MR2 fixed quickly, great job, keep up the hard work and stay safe and healthy 🤘🤘

[@Ltbookum]

While the failing of the trans was a combination of things and the before mentioned hard miss-shift like possible on a motorcycle was the final thing that broke the gears the biggest tell tale sign that something was wrong was that overheated 5th gear selector. If you rebuild a oem transmission you have to shim those shafts to 100th's of millimeter clearances in order to achieve prefect shaft endplay. With that nut coming lose not only are you dismissing those fine tuned measurements leading to the harsher shifts and premature wear; all that torque is also pushing those shafts apart as hard as it can. Sideways pushing into both that selector and bearing causing that overheating and that gnarly rip in the outer bearing. As well as outward causing that wear on on the dogs. Your lucky the case didn't break. Well you live and you learn shall we say, I do respect that your owning up to the mistake. Lets hope it's a expensive lesson to not half ass anything during a build. Though with all due respect i've not really seen you do that so far..

[@christopher19691]

coming up on that 1mil subscribers!!! lets go!

[@junkpusha]

Those look like 120 right there! Emilio 👊👏

[@hawaiiandragon76]

Love the Hawaii license plate on the bench

[@ruffracer24]

Putting that work in💪🏽💪🏽💪🏽

[@Crossmaster092490]

Love watching you guys. Across country in ct. Keep it boosted 😎

[@sticksTOstreets]

Props for working on the transmission... that looks intimidating

[@northdakotabeast1547]

Milo with the 5head plays! Thanks for the content as always!!!

[@mk-jf1ux]

16:20 “what is up guys, today let go ahead and cop us some sick lambo merch, Dang son!!”

[@Franks_Garage]

Well okay then Mr.2Turbos, gettin it crackin!

[@Sausketo]

pro tip, whenever you torque make it click twice, sometimes there is spring left in the system that makes a tiny difference, or specifically for low torque if you go to fast then it can click early, then going the slower the second time will still move the nut

[@chucksims6332]

Prelude and MR2 are running, not sure if the rowdesy is still good, hatch is waiting for RnD, so I guess its time for some wago love. its nice seeing the things getting together

[@anglingnvirginia1346]

Love all the videos! Keep boosting on !

[@Donni344]

Milo reppin my home track! 🤘🏻

[@Shaunsponds]

mr2 needs a detachable wheelie bar ASAP

[@jdmguru5520]

Keep posting man quarantine is killing me 😂😂😂😂

[@mk1kieran]

Yeah boi! Go get that 8 😜

[@dylanbradley9188]

SHO-NUFF...

[@vaughnhill3437]

That was the smart way to go . Just replace it all while you have it apart. That way you wont have any problems later on putting a that hp to it every pass

[@joshuarichkid6375]

The mr2 needs a name!!!

[@raM3.54]

That idle sounded pretty sick.

[@badams24]

Just a Supra chilling at the end