The Mr2 Is Almost Ready To Make Some Power!

[@RobDahm]

Hell yeah! Excited to see that egate work it’s magic on the mr2

[@kaelanxyza]

Hell yeah, Rob Dahm in the house!

[@karlpaljev9790]

Mr2 vs Rob Dahm rwd Mazda

[@hardcorebestnlrccarbuilder]

Rob Dahm i like the car stuf u are doing but can jou make some vids like before u was big like the 20 dolar speakers and cheap subwoofer ore the gun vids i like it very much thee is no gun channel gone be close for me

[@MrBaklava]

Dorito Daddy Dahm

[@yobwoc2424]

Please race him in the 3 rotor!!! That would be a race!!!!

[@Possum_Wagons]

Not sure about everyone else but I’d watch daily vlogs of whatever y’all are into 🤷🏼‍♂️

[@rileymannion5301]

End of the day daily vlogging is hard on the people, I'd rather less content but have the boiz not stressing about getting videos out all the time

[@Op1zilla]

Yep, ggz

[@Possum_Wagons]

@@rileymannion5301 that’s true I hadn’t considered that but I’m also not like telling them they have to do anything, just that I’d watch if they decided to.

[@TooR3ckl3ss]

Forsure

[@tq64to4]

Same

[@pewpewwithtodd8077]

I was going through withdrawals, this was perfect timing.

[@bigblizzhigh]

Right 🤣

[@bradharold2209]

Been slacking since he become a florida man 😂

[@THCv3]

I saw your picture and was like wait, I didn't comment yet. Lol

[@adamh.8608]

Lmfao. Pulled up the channel last night to see if I missed an episode. Withdrawals suck.

[@_Professor_Oak]

@@adamh.8608 I do this way too often lol.

[@eastyyx]

You should make a mount to hold the new exhaust up it's just hanging off the turbo

[@leonboersma2375]

I think a mount to the body will make it worse. Due to the tilting of the engine under load you'll add a lot of tension on the turbo and the manifold. Maybe a bracket from the engine or turbo will do.

[@remkoyvette1918]

Indeed, hang it in rubber for movement, if it had moved more then a bit it would have rattled against the body like crazy

[@GravityKnightFlying]

agreed... it needs to be braced to the motor so it all moves together, but has some support... some rubber in that mount would be even better....

[@paulezay3599]

Right on buddy

[@JesseGayvoronski]

Remember Kyle, we're not just here for the cars! You boys are entertaining and charismatic and great to watch

[@tomanycooks]

can't get enough of this channel mate. you're doing so well for yourself. Wyatt is the best addition, he's purdy

[@qcbtbx]

Loving the attention to detail for tuning purposes!

[@anthonyestevez118]

So impressive! Great job you guys! Us fans just want to watch and feel like we're there hanging out, whatever you guys are doing. Keep up the great work! Thanks for sharing!

[@ripnliptightlines5092]

Wyatt is a big key to your operation. Really like your guys chill relationship.

[@timothywise4625]

They always say the last 10% of a build takes 90% of the time lol

[@MafiaboysWorld]

It's so true, it kills me knowing how close my build is. 😢

[@atragerlspezi9500]

Left my bike at like 80% for about a year threw me back quite a lot

[@steeznsteve]

What if you put the wagon diff in for now to get the axle measurements to get everything ordered at once? Take it off once you get the measurements.

[@boostedboiz]

Because it would probably end up staying in there haha

[@steeznsteve]

@@boostedboiz 🤣

[@BrodeyDoverosx]

@@boostedboiz facts

[@MrCharlesAdrian]

@@boostedboiz I admire your honesty 😁

[@craigwhite7618]

My thoughts exactly! I, along with everyone else, what to see hard AWD launches out of the Rowdyssy. It would be awesome to see it on the street gappin exotics & Mustangs light to light!

[@calebkinghorne9469]

Awesome video keep up the great work Kyle!! You and Wyatt are killing it! I’ve learned so much from your videos about Honda motors and stand-alone tuning/sensors. It so awesome to see you guys progress with the Channel and your builds. You guys are a huge inspiration, thank you so much for making these videos

[@hyoogekawc8465]

Out of all the channels I am just waiting to see that Mr2 break the record!!! I am fiendishly waiting for that upload!!!!!

[@ryubiggie]

At this point they really need to aim for a 7.5x witch means they will need more cage

[@EZ-D-FIANT]

Yer I know Nathan and I've been telling him to worry about the boosted boys since he first built the white one! Nathan was like haha then, I bet he's sweating now lmfao....

[@MrBill-rs3do]

Appreciate how Wyatt keeps everything neat and tidy in the shop and on the vehicles. Way to go Wyatt!

[@chrishears]

All the data! Kevin from KRS would be so proud of you guys, being that he's a big data guy.

[@ryandefeo7912]

KSR

[@johnmaher6642]

Been watching since the Geo and hatch in the garage, it's amazing how far things have come keep up the great work can't wait to see the all the fleet back on the road!

[@Broontango]

Damit… was hoping this was the dyno video already haha nearly there though!! Let’s gooooooo, we’re going to the moon boyz

[@riborickertt]

Its all talking lately. I wanna see some racing

[@trilliedon8728]

@@riborickertt please hush up.

[@toxinfrost8747]

I miss you 😢 it’s been 5 months

[@joseaguillon207]

No bro not the moon lol we preventing that

[@jackc7084]

Great progress! Please make the ECU control the WCAC cooling pump From watching many other channels, most KZbinrs add a manual switch for the WCAC pump, but always forget to turn it on.. Having the ECU control the pump will give you one less thing to remember during intense times on the strip

[@unathandavis]

Finally!!!!!

[@adwood201]

So long as you mount it properly you can put almost any independent rear suspension diff in Rowdessey. It's just a matter of getting the flanges or shaft connections adapted and maybe changing ratios to suit.

[@aldenrichie]

"now don't skip ahead just yet..." ***immediately skips ahead***

[@ForeverNeverwhere1]

I' m a 51 year old woman with a full head of hair who lives in a country where Keeps isn't even available, of cause I am going to skip. Happy he is getting the advertising money though.

[@mopar513]

The MR2 is by far my favorite car on the internet. I cant wait for you to go out there and take that record. Congratulations on all of the success with the channel you guys definitely deserve it. P.S More frequent videos please....

[@bboyairrick]

You're joking about the livestreaming wiring or something monotonous, but people will for sure watch that like crazy.

[@Dmanpeterson]

Yea I’d watch some livestreams for sure.

[@chasemeyer6688]

I would watch that for sure

[@EvilResult]

Good idea using the ice box to keep the waste gate cool. Higher precision motors will not like high temperature operations, mostly related to the internal electronic components. Where i work have seen multiple customer CNC stepper Motors come in for Integrated Circuit chip replacement due to temperature stress failure.

[@pokergator4246]

Feels like the MR2 record is right around the corner. Good luck.

[@brianfields2135]

You can still install wagon differential to get the measurements and axles ordered. You can take the diff back out once you have the measurements and that way there everything is just waiting on the diff.

[@adamh.8608]

"Almost there". Works for hand grenades, horse shoes and racecar builds. But seriously, so pumped for you guys. The MR2 is going to shred. Can't wait to see it chew up the quarter mile.

[@codystepanian9558]

Nice to see you guys take your time and doing it high quality. Keep up the good work!

[@antg867]

I would 1000% watch a twitch livestream of just bullshitting and working on the cars

[@svicozoro1502]

Me 2 bud only from BBoys pfi cletus end tomB ! Go on twich end i lock 100% all this videos i love this shit to look 😇💪

[@PuppyDawt]

More videos = More Happiness Been sitting in limbo waiting on parts for my build, so seeing the mr2 come together is keeping me excited. 😆

[@FangOfTruth]

I worked in a factory and dealt with thermocouples. They can go bad in an instant. So think about getting an extra one of the longest just in case.

[@alanloyd7164]

Yep RTD is the way to go

[@Aheitchoo]

Word

[@JR-vt9ep]

On the exhaust, I think it needs another bracket to hold it up, the weight of it is putting pressure on the exact spot it broke, add in extreme heat and you get a break!

[@AndrewK2020]

Wyatt may need keeps if his hair doesn’t grow back 🤣

[@Thedude897]

Kyle doesn't pay him enough for keeps lol

[@tspectuning]

Love the real st. Stickers. Some true OGs right there and they’re right in Sanford, FL. Great ppls, beautiful shop

[@jr3m555]

i know why the valve cover had to be swapped but it doesn’t stop me from still missing the pink one

[@cae2487]

Having that exhaust exit out of the top helps provide extra traction by pushing that air up it pushes down on the rear tires

[@802Garage]

This may be a dumb question, but why not just go with another brand of diff for the van? Use an R200 from a 350Z or similar. Super cheap, axles are beefy as hell, etc.

[@anotherefncrxvlog4350]

the gear ratios would be completely off. there’s a reason this community been building awd Hondas for 15 years already and still use only Honda diffs. if there was an alternative we would be all on it

[@802Garage]

@@anotherefncrxvlog4350 I just looked it up and holy hell 2.533 ratio that's crazy. I don't even know if R200s come under 3.0 ratio. I understand there are usually reasons for doing things, but also it's often because people just follow what other people have already done and then a new trend comes along when someone actually tries something different haha. That's just a crazy strange diff ratio though. You'd have to go with something custom from the truck world I think to actually find another ratio like that.

[@anotherefncrxvlog4350]

@@802Garage exactly, and after all that hassle you probably finally found a wagon diff 😂 but honestly they’re not as RARE as Kyle says they are, but they are expensive. he chats with my big bro Brandon (wEF_shitUP) who sells wagon drivetrains every week. i think he has 2 as we speak, but Kyle must not have the cash after that nsx purchase. i know Brandon has already sent him bearings to go awd in the ek hatch, the van probably just ain’t super high on the list rn

[@802Garage]

@@anotherefncrxvlog4350 I think Kyle likes good deals. I can relate heavy hahaha. If something isn't available for a good price, it isn't available. :P

[@jordanfearon9088]

Nice to see young guys just living the dream. Hell yeah brother 🇨🇦 🇺🇸

[@MillionairX]

Honestly, cruisen in one of the racecars that still runs, goin for food, seeing people reactions, and the odd race.. thats premium content not many do anymore. probably why Emilios channel is kick ass lol.

[@richardfarmer6570]

Great progress, can't wait to see the MR2 on the dyno. Got my 1 mil subscriber t-shirt yesterday, looks great.

[@8alakai8]

don't know if the back of the mr2 is staying empty with no bottom plate that big hole in the bottom will suck air and hit the rear bumper and stuff and work as a para shoot at high speed

[@13christbane]

parachute

[@8alakai8]

@@13christbane i live in amsterdam i can say it perfect just not that good wwith spelling but i speak dutch mainly

[@petermerkin6428]

Kyatt and Wyle and killing it!! Always good when Rob Dahm chimes in. DECENT!!

[@sikcrx89]

All this hard work Wyatt is putting in. You need to put in as much work on his truck. He relocated and everything. That is what's next for this channel

[@DeejayPozE]

But isn't Wyatt getting paid though? That kind of messes with the dynamic. It is content though...might work?

[@sikcrx89]

@@DeejayPozE No idea of his pay. Remember why Charlie was no longer part of the group? I don't want to speculate. I Know Wyatt has a ton of time in everything going on in FL. Payment or not I think Kyle deserves to repay the favor and get Wyatt's truck to the stage they can go together.

[@richardlucero2188]

Charlie just wanted to live a party lifestyle.. the reason he walked away was because he wanted to get paid but didn't want to help out with the channel and he showed.. just look at his channel he hasn't put up a video in over a year

[@toddsheppard9920]

It's so nice to see a new vid. Its been a minute... Keep up the amazing content!

[@ibrooksie]

Uh I’ll take, “you should have filmed the pulls in the nsx yesterday” for 500.

[@justaguynamedmax8207]

Can't film hooning in the street anymore if you're a big KZbin or you get busted.

[@theboomfish]

@@justaguynamedmax8207 Damn right. Filming yourself doing illegal shit is not a great plan, when you have so much to lose 😎 I am sure there will be 'mexico' content at some point soon.

[@theotherbrent]

Happy that y'all are taking time and doing it right. But Dang i want to see Boostedboiz on that record. This waiting for parts has to be driving you crazy.

[@PowRKord]

Kyle: ...data... Wyatt: ...data... Kevin: I feel new movement within *The Force.*

[@Dukes3677]

He's their teacher.

[@93jdmmike]

On the NSX instead of getting another trunk to paint try to find a carbon fiber trunk also will help with weight distribution front to weight back percentage

[@Korruptionen]

Isn't the honda Ridgeline AWD? Would it's rear diff work?

[@Latezen]

mounting points are way diffrent otherwise good idea.

[@gnarkiller]

@@Latezen they could do some sweet custom work,

[@Latezen]

@@gnarkiller would be cool to see it done tbf

[@Bumblebee4788]

Pretty tough unit, watch Wiseling Diesels video on the Ridgeline

[@mrgmc6314]

@@Bumblebee4788 I want to see him build a fast ridgeline as a daily but a 1st gen .... he can get a 2nd gen and do the same but the 1st gen first ....

[@frostykyogre]

For the rarity of a NSX trunk and the flatness of the area around the hole, it might be worth it to patch it with sheet and get it body worked when you go rear exit.

[@JB-Mk1TDI]

fab up a exhaust brace ,help it from cracking again

[@ginganinjaracing]

Yep

[@Ryan-719]

Put the wagon diff in the rowdessy since it’s heavier for now… and put the weaker one in the hatch since it’s lighter. It’s just make sense to speed things uo

[@Randybobandyandy]

It’s nice to see jack stand helping you out 😂

[@GickelsGaming]

I listen to Kyles Keeps ad's because thats more to the average viewer time. It aint much but its honest work

[@dixonbauls5048]

Oh man, using a KSR term “ALL THE DATA” lol, keep on keeping on guys, love watching the progress with the channel and the builds

[@jackevans2476]

Daily uploads needed. Watched from day 1 keep them coming. Check every day for a video always disappointed to find there isn’t one haha

[@rastadread2327]

Hell yeah it's 130 am here in Perth Australia was just about to hit the sheets when I got the notification haha 😂 not any more

[@stevekarr4613]

Typically thermocouples have calibration offsets that you need to enter for the temperature range you are using for the EGT system.

[@FormDigg]

If Brent doesn’t tune this imma be big sad

[@Diamondback_RC]

Be ready to be sad

[@rileymannion5301]

@@Diamondback_RC lol yep, tune is a tune aslong as she dosent blow tho

[@dagnabbit8691]

Brent is great at what he does but I'd like to see someone else on the laptop for this setup

[@Matty.Hill_87]

Kevin from ksr would get her running sweet

[@svkojdm]

Aberatedr tuning ftw

[@joshk8316]

Got my shirt bro it’s freaking DOPE worth the wait bro no doubt 🤘🏽thanks dude an congratulations again on 1M subscribers!🤘🏽💪🏽💯

[@cedricklanteigne]

thaks kyle for wanting to remove that exhaust hole! it doesn't belong there at all

[@r7kelley553]

I know I'm not the only one that would watch the videos of just whatever you guys are doing.

[@AT_motors]

That electric wastegate is so dope. Interested to see how well it works

[@Grimm-Gaming]

It works on Dahms Rx7

[@dalebickham2666]

If they worked well you'd have seen them on the top promods etc by now

[@peppermintnightmare4741]

So stoked for you guys!

[@michaelmackaman3572]

That exhaust cracked from the heat and vibration, and not being braced. That is a very long pipe to be supported just by the turbo flange.

[@matt10011987]

And?

[@gorgewashington1216]

you need a support for the exaust its heavy and yes your idea of rear exaust good idea and front celle good too i hope you can do it

[@ryandefeo7912]

Need to get y’all a sure enough roll cage while y’all at it

[@Fordman7575]

Especially since he wants to "Do it right".

[@dalebickham2666]

As if....

[@chadschmitt9798]

Wyatt is the icing on the cake for fit and finish on everything he does🔥

[@2ANinja]

I think Brent might have an NSX trunk laying around

[@MillionairX]

isn't brents the previous generation with pop up headlights? dunno nsx, same car different front ends?

[@2ANinja]

@@MillionairX i think kyles just has a different front end

[@y49crx57]

Yeah he still has it I seen it hiding in the back of the shop when I visited him

[@SirVic42]

Probably in his storage somewhere.

[@fxtalfr8735]

@@MillionairX not sure if they're the same but Kyle's nsx was modified to remove the pop ups.

[@dailygaming2450]

Congrats man I've been watching since about 100k subs nice to see your growth love the content man 💯

[@sampope6713]

I can't be the only one who noticed the cable ties holding the EGTs cables together, lets hope they don't melt ...😂

[@alskate2]

They are 100% gonna melt 😂

[@EricCollinsEET]

Stainless steel zip tie would work well there

[@bobhenderson7961]

The NSX exhaust needs some sorta hanger to absorb / transfer vibrations away from that weld it will crack in the same place otherwise

[@danielhigley8543]

Why not do an 8.8 rear dif out of a mustang or an explorer? There are Infinite ratios available to match the front, and they can be built to be bullet proof.... and they are a dime a dozen.

[@_Otaku-kt8be]

💯

[@ryanpringle5406]

The 2.1 ratio the Honda’s need is very rare

[@christianbuczko1481]

Im glad to see your learning from kevin. Btw, cleetus has a spare jetboat, needs abit of work, you should buy it.

[@TheRoachmancometh]

Pretty sure Cleetus kinda hinted in the last vid he probably end up sellling it to a friend 🤷🏻‍♂️

[@christianbuczko1481]

@@TheRoachmancometh cleetus has alot of friends,

[@TheRoachmancometh]

@@christianbuczko1481 truth, but Kyle has said a few times he has the itch, just needs to fond a deal on one. 🤷🏻‍♂️ maybe Cleetus has that deal. Either way, id bet Kyle has a jetboat before long lol

[@garrettsuderman5485]

Doesn't the shopping cart go kart need a little tinkering?.. id watch that lol or a razzle dazzle update

[@ramonlopez5307]

Yes! roll racing the NSX.I commented about you roll racing the nsx a couple videos ago .i think it will do great👍.

[@wahjahkarasta4268]

Take the engine from the prelude put in the hatch and keep brent legacy going and its already a 1000+ hp

[@icyphilippe]

looks like there is a bolt welded to the top of the exhaust on the NSX so i bet there was a mount on the chassis before which would help the sag on it but might have cause some stress with the turbo moving but not the rest of the exhaust

[@Tintingsupremacy]

All these electrics I hope y’all keep a good battery in this car 😂

[@_Otaku-kt8be]

And alternator lol

[@PatsRC]

Good battery...? BLaSpHemY 😅

[@mikehawk1673]

Battery? You mean jump box

[@BuffyAngelo]

I would redo the cooling for the gate. What if you want to take it out and cruze it, you won't have the water box on the whole time and if you do it's going to get hot.

[@gnarkiller]

If you guys keep doing things legit style we can't call you boiz anymore

[@dylanbrandt3687]

Boosted Gentlemen

[@tycoonbob]

"Men with non-eBay turbos"?

[@Fordman7575]

Well they are ignoring the illegal roll cage so the name shouldn't be an issue.

[@agenda2154]

I would look at making a undertray for the back that gaping hole will cause a lot of low pressure and drag. Keep up the good work

[@whiphore]

Going for worlds fastest mr2 and definitely could do worlds fastest minivan easily with minimal work

[@brandon-leeeinbeck3743]

Love the works and information on parts directions for upgrades

[@ryanpringle5406]

Let’s go!!! Rowdisey finally getting some love

[@Joenunzy]

You could always use the hatch diff for mock up just for measurements and you could have the axles already by the time you find the diff.

[@raymondmiller427]

If you ever did do a twitch stream I would definitely watch …

[@donanything6816]

Thanks for the update, Kile.

[@macro820]

Film the small clips then put them together at end of week lol

[@yallbeanplay3d14]

Do a very similar style exhurst like the mr2 but instead of going under the bumper like you said use the holes that are already in the bumper, think the would look pretty cool and be different!!!

[@GimbleOnDew]

"Don't skip ahead" skipped ahead 60 seconds, been shaving my head for 8 years Keeps ain't got anything for me

[@Mariusz803]

Absolutely skip ahead of this utter BS. baling is genetic and cannot be stopped. This is common knowledge these days. This stuff can slow it down in some cases but not reverse it. It's a pure and simple scam and wish he didn't support it. Even on the companies website you can tell they have no idea what they're talking about.

[@jarvalarvis]

Kyle!!!! Use some stainless zip ties on the egt probes the plastic is only rated for 150xegress before it melts

[@JDMz]

Hi Kyle. I have approximately 7 wagon diffs. I will message you on insta with price👍

[@JoseFlores-tk4sz]

I'll pay for 1 to send to Kyle

[@stephenmerwarth7550]

Wyatt spreadin knowledge....people listen up ! Great work boys as usual ! Keep it up

[@WreckreationWorkshop]

Day 392 of asking what his plan for the cage is gonna be

[@Fordman7575]

It looks like the plan is to "do it right" while ignoring the cage.

[@guidoheeling1179]

Why not try something woth a ford 8.8, also a lot stronger! Just needs some kind of coupling between tat and the trans to take some slip, but with Toms custom vicous couples outside of the differential that would work.

[@anything_under_the_sun91]

I would use the one you have saved for the hatch on the van think about it I mean you might be able to get away with running a CRV diff on the hatch you would think because of how much lighter it will be and who knows by that time there might be a company out there with upgraded parts but also too at the beginning of the day I would I would I would does not mean anything because at the end of the day you need to do what you feel is right you guys are killing it out there man

[@OG_Twichingdeer]

Put a straight axle in the rear an a four link suspension

[@phillipward937]

Yeah, they're certainly not going to need independent rear suspension, at least not on a minivan.

[@michaellatham9737]

Dude ive been losing my hair since basic training @ 19. Sometimes we just are destinrd to be bald. Lol. Great to see ya back dude! Check out honda oro jason. He has a mugen awd van kn a vjd recently! Would be cool tk see all those parst on the Rowdyssey

[@nicksteele1706]

Hey @kylewade why not put the wago rear diff in the mini van so you can measure out the axles and send out all the measurements for the front and rear then pull the wago diff out till you find one for the mini van that way once you find 1 you'll already have the axles to throw in just saying cause I'm sure you'll end up finding the diff in the time it takes to make the axles possibly I mean I Kno it's more money but at least its not waiting then send out the stuff for the rears then have to wait longer for them to come making the mini van sit around longer just a thought bro