AEG Turbo Lavamat fault finding board blown E91 error, crazy faults. Broken or not broken?

Aeg washer dryer L76680WD
If you found this video helpful you might like to:
Donate: paypal.me/bootsowen
Support: / bootsowen
www.amazon.co.uk/shop/bootsowen
You can buy tools and parts, or things you were going to buy anyway from Amazon through the affiliate program (links below) and I may receive a commission for the sale. :
Ecover laundry liquid: amzn.to/2Fl3Jqx
Calgon: amzn.to/33es6hL
Vacuum Cleaner: amzn.to/35lsAFr
or you can buy anything else through the link. This has no effect on the price for you. The links used are affiliate links. As an Amazon Associate I earn from qualifying purchases.

[@theoddjobcentre6686]

I might be getting a electrolux my pro yay I know they work well when I have used it in the past

[@MisterBrownJack]

It is acting very strange and if it is getting destroyed R.I.P AEG washer dryer. At the same time I do really like these washing machines

[@washertech]

I mean these things are designed to fail after the warranty usually so I wouldn’t expect much from it. I think the options you have is: 1 get a new board for it (probably wouldn’t be cheap) 2 put it on a spin cycle and chuck bricks into it when it reaches a fast enough speed 3 try and look at the board again. Personally I don’t think you should waste your time on it I think the brick is the best thing for it. Shame I know but what else can you do

[@yalrikabi2007]

Mr washer Lad This machine is 3 years old

[@washertech]

Right, and your point is?

[@ben3291]

@@washertech Some AEG models come with a 5 year warranty as standard . I have a Washer only version of this very machine L76685FL its 4.5 years old runs like a champ and has a 5 year warranty it's still got another 5 months left but I've got it insured so it will get repaired or replaced even out of warranty.

[@tazaki1]

Onzin wat je uitkraamt

[@mieleguy1600]

I have the correct service manual for this machine. According to the manual: E91: Communication error between user interface and motherboard. Have you checked the cables for burst on wiring? ED1: WD board communication alarm. Problems could be due to hardware (faulty components, wiring etc) or due to disturbs (burst on wiring) on the motherboard. ELE: Electric Test. This checks if the machine is grounded correctly and has no earth leaks etc. This machine can store up to 3 errorcodes. To see them, go to C11 and press the start button to see the other errorcodes. Hope this will help!

[@bootsowen]

Thanks

[@MarcoVenanzi]

hi, do you happen to know what e75 error code means? can't find it anywhere

[@whirlpool_addict_]

@@MarcoVenanzi searched up and it means: e75: water temperature sensor circuit. NTC and or wiring are faulty or faulty PCB.

[@whirlpool_addict_]

ele means electric test so nothing wrong, aka after you shutting down after doing a test mode phase, it goes to ele (electric test) which tests the motor and the heater.

[@ICallTubers93Child]

Is this an washer/dryer?

[@danandlaundry]

If it’s going to get Bricked Replace the motor with a universal brushed motor

[@bootsowen]

good idea, I'll have to see if i have one that fits.

[@kubaandrzejewski2191]

I think you should just smash it with bricks. There's absolutely no point fixing this machine. I think it's just too of a complicated fault and a complicated machine.

[@yalrikabi2007]

Kuba Andrzejewski This Machine is 3 years old, but you have to get a new circuit board

[@ben3291]

@@yalrikabi2007 it might be still in warranty as Most AEG Washers have a 5 year warranty.