Hint. To unsolder bent legs, you can use a (very) large-caliber needle from a syringe (like one you use for flux tube, or maybe a bit lower diameter). You just take a needle, put it on the tip of the leg, melt the solder with a soldering iron and unbend the leg back into place. And another tip. To punture a hole in clogged via, you can use simple wooden toothpick - melt the solder and insert pointy tip of toothpick into via thats it. Thanks for videos. I really like to see this stuff.
@GeeFunk84 Жыл бұрын
The mullet is getting better with each episode!
@Enraged-Gecko10 ай бұрын
A mullet is damn near obligatory when you refurbish the Cadillac of ‘90s game consoles… it’s almost a crime that there’s no montage.😂
@abumuad Жыл бұрын
Why did I just find this channel? KZbin needs to do a better job at recommending channels. This is pure awesomeness. Subd
@RyanFGNM Жыл бұрын
Man, it's so cool watching how good you have become at modding and fixing these old consoles.
@BorderlineOCD Жыл бұрын
Lots of practice and good flux!!
@DahakePL Жыл бұрын
Very underrated channel, we love your content man!
@joveaaron-real Жыл бұрын
SAME!
@oconquistabolo Жыл бұрын
he should post more often, he would definitely get more recognition
@onebladeprop Жыл бұрын
He's steadily growing. At this rate I think it will really blow up in about a year.
@Lenskee Жыл бұрын
That desoldering gun video montage sounds kinda like Sardaukar Chant from "Dune". 😂 Another easy operation by Dr. Borderline himself! Sweet! 😁
@BorderlineOCD Жыл бұрын
It was uneventful, but I’m always a little bit nervous firing up the system after a lot of work is done to it like this.
@Brett_is_Veng Жыл бұрын
i love the simplicity of these old consoles. New consoles have got way too complicated which makes them more fragile and expensive. None of these old consoles are perfect and most have issues of one sort or another but they do all live on far longer than the manufacturer thought they would. But that makes things so wonderful when you can get hold of a unit from your childhood or maybe even before your time. Love the vids, you have a fun hobby
@oblivieon1567 Жыл бұрын
Another issue is our eyesight 🧐has gotten worse with age as the newer console components got smaller. It's not fair! 😢
@RetroMoments Жыл бұрын
The AES holds up great as of today. So many great fighting games.
@ShinryuZensen Жыл бұрын
Not only fighting games: the NEOGEO was king of nice , fun games in general.
@BorderlineOCD Жыл бұрын
If you enjoy class arcade games nothing comes close. Modern arcade ports just don’t have the same feel.
@davidwatkins6307 Жыл бұрын
You're very underrated I appreciate the videos you make and how you break things down I just turned 46 I had got me a neo geo system when I was like 22 from a game trader store at a mall back in the day and when I took it apart I wanted to solder some wires to that led light that was in the back and make a little puncture hole and hook it up at the top lol thank you very much for the video
@BorderlineOCD Жыл бұрын
It’s that inner desire to tinker. Once you get the bug, it’s there for good.
@capt_howdy Жыл бұрын
Absolutely incredible content, wish I had discovered the channel sooner. The production quality/presentation/editing is amazing!
@adilsongoliveira Жыл бұрын
I trully admire your organizational skills. Your workspace, shelves, etc are so organized and clean! I wish I could do the same with my home office but I'm a lazy slob when it come to that 😁
@BorderlineOCD Жыл бұрын
You can, might take a weekend but you’ll get it done. You’ll feel lighter and eager to spend time in your office when it’s nice and organized trust me!
@huldu Жыл бұрын
Everything is so professional and well executed. I've seen a lot of similar channels and many of them do not come close to this. Many of them try joke around while working but it just gets over the top silly, like scripted. Most of us just want to see a professional do their magic while restoring/fixing old or new hardware and hopefully learn a thing or two in the process.
@ferndog1461 Жыл бұрын
That could be it's own channel for Patreon supporters. Dunkin' / $tarBucks / TimHortons toast to you.
@Nordlicht05 Жыл бұрын
@@BorderlineOCD when I start a new project it goes boom pretty fast. I do it regularly with organising. But it's needed 😂
@killyouridols08 Жыл бұрын
Been binge watching these videos for a week. It's like ASMR for geeks, I love it!
@BorderlineOCD Жыл бұрын
Glad you like them!
@FallApartMan Жыл бұрын
😂
@ModzvilleUSA Жыл бұрын
Amazing work as always brotha! For those components with the legs bent parallel to the board, I like to leverage them up and snip them as flush as possible with flush cuts before desoldering. It's still a pain and isn't perfect but it helps quite a bit.
@BorderlineOCD Жыл бұрын
Thanks bro. I might have a bit more patience to do that than wet them with the iron and bend them straight before desoldering. Heavily edited and sped up video- the recap took just shy of a couple hours. Not looking forward to doing that again soon 😅
@johnsonlam Жыл бұрын
Accurate and beautiful soldering, and very nice narration of what's being done, thanks.
@BorderlineOCD Жыл бұрын
Thank you very much!
@Enraged-Gecko10 ай бұрын
The soldering on his Sega Master System II RF out to composite cable conversion was even better, as hard as that is to believe. New consoles manufactured today don’t look that good.
@davidbrinkman7867 Жыл бұрын
those shelves look epic, love the content and tutorials, keep up the excellent work!
@ryandary Жыл бұрын
The coldness of that "Yeah, boi" at 3:06 SENT me
@davidoli Жыл бұрын
You can overcome most of the TV moiré effect(the swirling) by recording with the camera in a diagonal position. You lose some sharpness but I think it looks better than the moiré effect
@krushingbro6620 Жыл бұрын
amazing video as always, i see huge success this year for ya, and you deserve it 100% keep doing what ya doing 👍
@BorderlineOCD Жыл бұрын
Thank you so much!
@Ojref1 Жыл бұрын
Anyone doing restoration on the console AES, the MVS (esp gen 1) carbon resistors sometimes drift out of spec over time. Lower quality ones exhibit this moreso than others, especially if the unit was stored in less than ideal conditions. Check the values if time permits. Metal oxide replacements are perfectly fine and tend to last a lot longer.
@jeffgoodnough9704 Жыл бұрын
Looking toward my own Gen 1 MVS project, that's super helpful. Thank you!
@edlowry1 Жыл бұрын
Lovely clean setup, great video, descriptive and very informative. Love the camera views and info in the description, thanks , subscribed
@Gleamoz Жыл бұрын
Man, that KOF game looks crisp, and I don’t remember seen those animations, awesome mod. Great 👍!
@BorderlineOCD Жыл бұрын
The intro music for that game always gets me pumped up
@adonian Жыл бұрын
I will NEVER AGAIN sell my Neo Geo. I had one NEW in the box back in 1992, sold it, then in 97 got a used one, sold it, and now got another one back in 2005, NEVER AGAIN.
@crunchinjelly Жыл бұрын
Love your vids. Binge-watched about 10 a few days ago. 😂
@BorderlineOCD Жыл бұрын
Glad you’re enjoying the content.
@Legatus_cubing Жыл бұрын
I love this channel, amazing content makes my day when I see the notification
@BorderlineOCD Жыл бұрын
Happy to hear that!
@PONTOCRITICO Жыл бұрын
I really liked your job. A very clean and conscientious service, with very adequate and accurate tooling. Congratulations.
@spudhead169 Жыл бұрын
Your soldering is spot on. I watch a lot of folk doing this stuff and they do good and perfectly acceptable soldering work, but most of the time you can tell by looking it's been done by a 3rd party. Your joints look factory.
@SparksNZeros Жыл бұрын
one thing i found useful for stubborn through holes is when you use hot air to remove the chip, keep the hot air running but held slightly further away and use your desoldering gun to vacuum it out whilst its the solder is still molten from the residual heat
@BorderlineOCD Жыл бұрын
That’s a good tip. I’ve did something similar on the Crystal Xbox recap video for a couple of really stubborn caps but I had the board vertical in the holder, with the hot air from the back and desoldering gun in front.
@karlohtsuki Жыл бұрын
awesome mods sir, hope you can do some repairs like PS3 FAT launch model, PS4's (Fat, Slim, Pro) and PS5's (with Disc tray, or without disc tray)
@BorderlineOCD Жыл бұрын
I may consider it, but I’m just not very attached to them. My personal history with video games kind of tapers off at the Xbox 360.
@oblivieon1567 Жыл бұрын
Neo Geo is such a rabbit hole. I've been a fan most of my life but gave up on OG hardware. I put a Pi3 into a Neo Geo X dock and couldn't be happier. It looks like an AES but man it's so much simpler. Great video though, for an OG unit it's awesome.
@Majima4879 ай бұрын
never get over how "angry" older chips looked, tbh they had a awsome look, if it wasnt feet it looked like jaws.
@dequan916 Жыл бұрын
2 uploads in a week . Thanks for the good content
@BorderlineOCD Жыл бұрын
Every day I’m hustlin
@arturwidurski Жыл бұрын
10:44 - 10:55 sounds a bit like a Cyberpunk 2077 soundtrack. On the serious side, amazing video. Thanks for sharing!
@BorderlineOCD Жыл бұрын
Haha it does a bit.
@wallyf7020 Жыл бұрын
Another OCB approved item. Great work and mod. Enjoy these videos.
@BorderlineOCD Жыл бұрын
Thanks again!
@kakolicht Жыл бұрын
It's therapeutic watching videos like this one.
@chiwingwu1478 Жыл бұрын
Maybe a useful tip: to desolder those folded legs @ 11:26 without scraping the board, use a soldering iron to heat the leg up, bent the leg straight before using a desoldering gun.
@kennylauderdale_en Жыл бұрын
wait, is the audio from EVERY Neo Geo mirrored unless you do this?
@BorderlineOCD Жыл бұрын
3-6 motherboard revision only
@Tangible_D Жыл бұрын
I remember as a kid dreaming of owning a Neogeo but the games cost nearly the same price as Snes or megadrive consoles
@aboutkab Жыл бұрын
Thank you so much, again a nice 'tutorial/how to' to keep for my future mods. A+
@BorderlineOCD Жыл бұрын
Enjoy!
@ferndog1461 Жыл бұрын
Your background looks so organized I thought you were on a green screen.
@phuang321 күн бұрын
Cool. I just recap my Neo Geo CDZ last week. It was put in the box for 25 years.
@richm4100 Жыл бұрын
I just did the simple 'trace cut' mod on my 3-6 board,gives perfect RGB
@garysapir2117 Жыл бұрын
Another great one. Now I know where to send all the stuff my wife makes me throw away...
@BorderlineOCD Жыл бұрын
Try convincing her it’s an investment that will pay great dividends in future 😅
@moandaindesigns Жыл бұрын
nice work. I did mine long ago and did the power LED under the reset switch mod as well.
@BorderlineOCD Жыл бұрын
Nice 👍
@nixxhimself Жыл бұрын
The neo geo is the one system that'll forever be out of my price range but man what an awesome system
@BorderlineOCD Жыл бұрын
You can always sell a kidney and make things happen.
@BorderlineOCD Жыл бұрын
You can also enjoy the entire library for free via emulation. There's more than one way to skin a cat.
@michaelwood9866 Жыл бұрын
I’d love to have a consolized mvs system. Hell I’d settle for a cd based system
@dabigsiebowski1 Жыл бұрын
Love the Videos man. Keep em up. I'm new to this Channel but I truly appreciate you and the videos. Thank you!
@rezqiano Жыл бұрын
Your videos are always mixture of entertainment and educational. Pure awesome.
@wildside4822 Жыл бұрын
Very neat soldering, nice work
@BorderlineOCD Жыл бұрын
Thanks 👍
@thefifthdoctor6780 Жыл бұрын
I did exactly the same mods to my aes with it being my favourite of all.
@clocky4209 Жыл бұрын
I like the way you work on electronics! So well done, I mean like its well thought out, and cleanly done. Like how you made your own capacitor diagram, and marking where they are on the board before flipping it over, all the equipment you have, and its just so... wow!! I really wish I could have learned how to work on electronics from college the way you do, it would have saved SO much stress and headaches! Whenever I tried modding or repairing my own consoles, I would always do SOMETHING wrong, and it just made me lose confidence in my abilities, and I eventually lost interest and dropped out. Watching this makes me think that I could get back into electronics if I just didnt rush through things and thought things through! Where and how did you learn to work like this, man?! Instant subscribe!!
@37Kilo2 Жыл бұрын
When the legs of caps are bent over like that, I prefer to trim them as flush to the board as I can safely do with some cutters to make desoldering with the gun a little easier. A bit more work, but worth it in the end.
@ewrooney Жыл бұрын
Those were some clean inputs on that arcade stick. 🤘🏿🤘🏿🤘🏿
@BorderlineOCD Жыл бұрын
For a 30 year old arcade stick it feels awesome!
@GoTiKYT Жыл бұрын
Very interesting video, thanks for sharing it 😁👌
@BorderlineOCD Жыл бұрын
Glad you enjoyed it
@garybroomfield5416 Жыл бұрын
Man I love your methodical working style. And your easy explanations even if I don't have the skill to copy you ! 😀
@BorderlineOCD Жыл бұрын
I appreciate that!
@Daaannn Жыл бұрын
That's what i call a perfect modding plus recaping, with a very good preparation before even pulling the soldering iron. Heart warning to see that someone still cares and do his best for old consoles! Well done!
@BorderlineOCD Жыл бұрын
These beauties deserve nothing less than my very best.
@RetroShare2 Жыл бұрын
To unclog the holes, preheat your board with the hotair, then use the desoldering gun.
@MrFixiit Жыл бұрын
Great work dude.
@BorderlineOCD Жыл бұрын
Thank you!
@clemb1623 Жыл бұрын
Fantastic work, neat video, nice pace, makes it look easy ! No only caveat is... Dude what's up with your hair ! 80s are over my dude :)
@sketchy0078 Жыл бұрын
Mad KOF skills, this has really made me want to get an AES system.
@BorderlineOCD Жыл бұрын
I used to think I was good, until a buddy of mine visited last July 4th weekend. He apparently also grew up on Street Fighter and similar arcades. I'm not exaggerating when I say we played a good 100 rounds over that weekend and I maybe won about 10. In summary, I'm not nearly as good as I thought I was, but it will forever remain my favorite genre of gaming.
@ustrucx Жыл бұрын
Amazing soldering skills!
@shadowarez1337 Жыл бұрын
Amazing content as always can't wait to get a few tools in so can start doing these kinda projects.
@BorderlineOCD Жыл бұрын
I resisted buying more tools for the longest time, but I have to admit a project like this would be very challenging without the soldering gun and the hot air.
@shadowarez1337 Жыл бұрын
@@BorderlineOCD got those finally just need this solder gun so much easier then using a wick can't seem to get the hang of that.
@Daniel-it1dp Жыл бұрын
I've been wanting an AES since I was a kid and put off buying one for the past year and now the prices have shot up even for broken consoles.
@keithstone001 Жыл бұрын
A bit of advice if your desoldering folded over leads it's a safe practice to heat the joint up with an iron and use flat tweezers to stand the legs up before using a desoldering tool. That way you won't damage the board. BTW how the hell do you keep your table so clean and organized? I'm so jealous. Ten minutes into a project and I'm already loosing tools in the clutter I've created. Great show man. Love your vids.
@BorderlineOCD Жыл бұрын
Good tip with the tweezers. I've always been a very organized person. I find it more enjoyable to work on projects when I approach them methodically.
@lgmuniz Жыл бұрын
Impeccable work, as usual. Love it
@BorderlineOCD Жыл бұрын
Much appreciated
@SHINdanny Жыл бұрын
Oh, I used to modify a lot of NeoGeos AES/MVS for friends over 20 years ago. Some with a switch for original bios/unibios, led reset button, stereo output on the back, ... I know I have some NeoGeo AES and MVS stored in boxes, after finish remodeling my home I´ll unpack them enjoy some games with the unique joyboard.
@BorderlineOCD Жыл бұрын
Very cool. I haven't heard of the switchable BIOS mod. I'm assuming you do a piggyback install and switch VCC or something?
@SHINdanny Жыл бұрын
@@BorderlineOCD yes correct, it is not that hard but it was very useable at the beginning of the Unibios development :D I enjoy your content very much and the way you work, desoldering not needed -> dissapeared from the working area ;)
@insurrectionindustries1706 Жыл бұрын
Love it, very clean work. You’ve inspired me to do my early 5V US model, but I wouldn’t mind grabbing a later revision unit like that one
@Marius150PL Жыл бұрын
Amazing video. If by some miracle I buy Neo Geo, I know what to do.
@budgetcoinhunter Жыл бұрын
Only thing that would make it even more versatile is to have an Everdrive cart you could load modified games with.
@JewelfactX Жыл бұрын
Great Work Buddy...
@BorderlineOCD Жыл бұрын
Thanks ✌️
@XmasTablet Жыл бұрын
Excellent skills man 👍 I always wanted a Neo Geo during my childhood, but could never afford to purchase 1. Maybe 1 day I can buy a AES 😂🤣😅
@LtSlapnutz Жыл бұрын
Found your channel while browsing Neo Geo vids and just wanted to say thank you for making these. I really enjoy them especially ones where you have to fault find you way through a PCB. Your narration is nice and clear and explains your thought process really well. I know in your NeoGeo repair-a-thon vids you mentioned maybe a Neo Geo CD in the future; just wondering how that is coming along or if you first need to source a console? Please note I more than understand how crazy expensive these are so I am not demanding/expecting a vid anytime soon, just moreso curious if you had any updates/thoughts on it? Cheers from Australia!
@enerjustics Жыл бұрын
50k subscriber special idea: supercut of all screw and solder removal clips only from all you videos
@UnbornApple Жыл бұрын
11:10 For desoldering leads at sharp angles like that I heat up the solder and use a pair of blunt tweezers to carefully bend the lead straight up. Then add some fresh solder and the desoldering gun will cleanly free the lead.
@BorderlineOCD Жыл бұрын
That's a good tip!
@andrewcosten Жыл бұрын
Fantastic job
@Bugrim Жыл бұрын
Какой автор красавчик и аккуратист, люблю такую работу. Жаль мне не удалось достать эту консоль, зато получилось собрать на основе аркадного автомата.
@gregjarvis1232 Жыл бұрын
If you did offer consoles for sale I would buy love to buy from you! Your work and knowledge and eye to detail is second to none and also would know exactly what I'm getting with no bs! Keep up the excellent work!
@BorderlineOCD Жыл бұрын
Maybe one day!
@javierr3030 Жыл бұрын
Great video, as always.
@leighbyford635 Жыл бұрын
Thank you for sharing your skills :)
@taggounet Жыл бұрын
As always, great job. I love watching your videos, your content is always very interesting!
@BorderlineOCD Жыл бұрын
Glad you enjoy it!
@AndrewPaul Жыл бұрын
Love your channel 👍 Superb stuff and a great job too!
@BorderlineOCD Жыл бұрын
Thank you so much!
@scubasteve31583 Жыл бұрын
I wish this video was out years ago when I did my first bios socket. I admittedly blew it. It sucks. I have since done 3 more successfully. Expensive mistake
@Sensi199518 күн бұрын
That joystick sound!💔
@vanja.lovretic Жыл бұрын
new drinkig game. every time when this guy say "guy", "guys", or any alteration. 🍷
@BorderlineOCD Жыл бұрын
Lol. I’m in.
@foregonereality Жыл бұрын
Great vid! Have you had the chance to use RGB Scart on a CRT at any stage? It's like night and day. It was the only pro of being stuck with poorly converted PAL 50hz games!
@BorderlineOCD Жыл бұрын
I haven't yet, but I'm on the lookout for a decent CRT with components inputs which I plan to hookup with a RetroTink RGB2COMP. I'm sure I'll find one eventually!
@cjjax6110 Жыл бұрын
Great video as always
@BorderlineOCD Жыл бұрын
Thanks man
@Gabrielnobre Жыл бұрын
Yeah Dud...your content really is great! Subscribing now.
@BorderlineOCD Жыл бұрын
Welcome aboard
@turdpeterson73 Жыл бұрын
I have a huge console collection that i have hung onto and collected all my life that have been in storage a few years now, i stumbled across your channel from watching TronicsFix and northridge repair videos and after watching a few of yours i decided to pull some of my systems to see if they still worked, i found a few of them are no longer working ,some wont power on, others had display issues some i have already repaired this week which was a virtual boy and 2 gameboys those where pretty easy i just reflowed the ribbon cables for now but i will prolly do the VB perm fix at some point, but my nomad has a really bright spot in the middle of the screen which i belive is just aging caps, my sega model 1 and sega cd model 1 still work flawless, i replaced the belt in my model 1 sega cd a few years ago and thats the only repair its ever needed, but my model 2 sega cd no longer will power up when i put a cd in it, carts work fine though. and i think my super famicom has a minor display issue. Anyway i havent done any soldering in very long time, the last stuff i did was installing a executer 3 mod chip into my xbox back in 2007 i think , i figured the time has finaly come to where i need to go threw and start recaping all these systems so i orderd me a digital microscope, and a new 2 in 1soldering + rework station and a few other things iv seen on this channel. im gonna practice on some old pc motherboards i dont care about first and evently start giving it go. Watching your channel has given me the confidence to finaly give it try as i want to pass my collection to my daughter when she is old enougf to appriecate them. Oh yea after watching this video i checked out my neogeo and it is the 5v model ( 3-4 board ) with a realy low serial number its all orginal and never been opened and is still working perfect but evently i want to do the audio fix on it so that was pretty cool to learn after watching this
@BorderlineOCD Жыл бұрын
Sounds like you got a nice collection. Great to see you getting into tinkering with it. Note: the audio L/R fix is only needed for the 3-6 revision motherboard. The 3-4 audio circuit has a bypass mod to improve it’s quality, but L/R channels are correct. Confusing I know but each revision board has its unique required mods/fixes.
@turdpeterson73 Жыл бұрын
@@BorderlineOCD the audio fix im talking about is to replace components snk removed in the 3-3 / 3-4 versions which causes power hum to be heard, the 3-5 boards they put the Components back in, its just a couple Ceramic Capacitor's that goes on the back side and 1 Electrolytic Capacitor
@BasementBrothers Жыл бұрын
The guide from FirebrandX suggests optional 220uf 25V caps on the RGB lines to protect against voltage backflow. I added these inside of my system in place of the removed caps, but the end result is much less clean.
@BorderlineOCD Жыл бұрын
What does your end result look like? Is the image darker or do you just still see some jail bars?
@BasementBrothers Жыл бұрын
@@BorderlineOCD I don't think the caps themselves resulted in any noticeable difference. They're just there to create a more correct electrical circuit. By "much less clean" I just mean my mod work inside the console was not pretty. Results look good. I also grabbed CSYNC from the TTL sync in on the Sony encoder chip and attenuating it. The reason I put them in the console rather than the cable is because I use the same RGB cables for my Neo Geo CD and CMVS. Thanks for the professional quality, interesting video, as always. Your Neo Geo videos always make me want to go play KOF 2K1. 😁
@djrkzr Жыл бұрын
I'm surprised that all you need for RGBBypass is only 3 resistors and not some tiny pcb with one of those ths7374 or 7314 reamps
@BorderlineOCD Жыл бұрын
There’s some interesting info on the RetroRGB post in the “oscilloscope analysis“ section. In this particular case it seems you can arrive at the correct voltage levels just by using resistors.
@andrewg.t9714 Жыл бұрын
If you come across a NEO GEO AES in mint condition, I’m interested with the all mods too
@sxixlxnx3 ай бұрын
Great work, great explanation. I regret selling my AES to this very day. It’s now way too expensive for me to get back into. With that being said I might purchase a boxed console and SD cart one day but unfortunately the games are a no go for me now.
@gordonjeffrey231076 Жыл бұрын
Great methodical work. Preparation is key to an easy mod. 👏
@BorderlineOCD Жыл бұрын
Thank you.
@HalyconDayz620 Жыл бұрын
Nice vid detailing the mods. Glad I picked up a pre modded unit - I’d be sweating beads! 😅
@BorderlineOCD Жыл бұрын
It’s a project, that’s for sure. Couple of the folks that reached out to me over the years all seem to struggle with the BIOS socket the most.
@daks74 Жыл бұрын
Clean work, thanks for sharing.
@BorderlineOCD Жыл бұрын
Thanks for watching!
@adeeshabandara9140 Жыл бұрын
Truly amazing
@BorderlineOCD Жыл бұрын
Thanks buddy.
@hairysanchez Жыл бұрын
Great video as always. The picture could be even better and no lag if you had a crt. How come you do not have one ?
@BorderlineOCD Жыл бұрын
It's pretty legit through the RetroTink, but I plan to acquire a CRT at some point. Haven't found what I'm looking for yet.
@CaseTheCorvetteMan Жыл бұрын
The part about the early revisions being 5v is not completely correct. I have a 3-5 here that is 5v requiring the regulated power supply, and i've had much earlier units that were internally regulated and one of those was an early productuion two board console. I don't know what the reason for there being two different designs was, because as you show, the board isn't different, simply the components installed are varied. It makes more sense to supply a higher voltage and regulate internally. The 3-5 and 3-6 had the correct 470uF and 75ohm (as specified by Sony for their CXA1145 and CXA1645) combo on their RGB outputs which gives the correct output levels, earlier revisions had the wrong combo with 100uF and 68ohm which gives incorrect levels (despite the all the bullshit stories about early consoles having great RGB and the serial number having anything to do with it, MKL debunked that myth decades ago). I assume those resitors you just fitted there are 220ohm? That is what i used to use on MVS systems when i added RGB to those. The later revisions (i don't think 3-4 is affected) have the C-Sync pin on the DIN socket joined straight to the composite video pin (so do all NEO-GEO CD consoles, but because they use the CXA1645 and have s-video output, you can use luma for sync by jumping that from the s-video socket), which can be corrected by cutting the track and hooking the c-sync up to the correct pin, i didn't see which pin you connected to, but i'm not sure why you ditched the composite video because there wasn't really a need to lose that, it won't affect it at all if you use an RGB cable that is wired to the correct pin for sync. The luma sync mod on the NEO-GEO CD makes a noticeable difference if you have a display device capable of showing it. The funniest part about the 3-6 reversed L & R output is the 3-5 also had it wrong on the board, and they were corrected in the factory, exactly the way you did it there. I'm yet to see any good reason to swap capacitors in a NEO-GEO, they were very good quality and didn't fail. Replacing capacitors is a massively over-done thing these days, if caps are leaking or have failed then by all means, but it is totally pointless replacing capacitors for the sake of it. Loads of electronic equipment has had issues with failing capacitors over the years, no doubt, NEC in the late 80s/early 90s were notorious for leaking and failing caps, Sega consoles that used SMD caps from the early 90s were shocking for it, but NEO-GEOs were not. I did a full capacitor replacement in a front loader NEO-GEO CD a while ago and it did not make one single bit of difference to anything at all. They used mostly the exact same capacitors (in the same and different values) as the AES. You're just runnning the risk of damage, minimal as that risk may be with your soldering skills being as good as they are, these SNK boards are known for being big heat sinks due to their big ground planes. You saw that while trying to remove that BIOS chip, those ground pins are a pest to get the heat into.
@cicaleseful Жыл бұрын
If you mod another 3-6, you actually don't need to do an RGB bypass. All you need to do, per Jamma Nation X, is cut the traces under the crystal. I can verify it works. See his AES tutorials. I also think it preserves the composite video, but I haven't tested.
@BorderlineOCD Жыл бұрын
I’m aware of the cut mod or “antenna mod” as I saw it referred to for the 3-6 but ultimately decided to do the bypass. It is my understanding that the RetroRGB approach supersedes the info on the cut mod and the RGB levels are more accurate as per the “oscilloscope analysis” in the post. Still worth a shot if you’re not already in there recapping the board and everything. Ultimately if it looks good on your equipment that’s all that matters.