Borla Exhaust for 2015-2023 Dodge Challenger V6 [Exhaust System Sounds]

[@heatedk]

Finally v6s are getting some love too

[@comradeyuri8492]

The first person/company that can make and exhaust system that can make a V6 sound like a V8 will make millions ! This is the best so far !

[@comradeyuri8492]

@@truthtimetv4575 : Jeez you completely missed my point !

[@MegaAdonis101]

Hyundai Genesis 3.8L R Spec 2013

[@krispydream6907]

I rather make a V6 muscle car sound like a loud V6 than trying hard to sound V8 (Ex. Nissan GT-R,Kia Stinger,Audi S5,Maserati Ghibli etc.) It make sense to sound V8 if your V6 wants to beat them on a race track or drag strip with plenty of engine modifications and tuning that’s just my opinion do whatever you want with your car you worked hard for it just make sure to keep safe on the road and alert at times

[@customcutscentral5658]

BORLA ATAK simply beautiful

[@u1richh]

Sounds good for a V6. You guys make good exhaust systems.

[@813Productions]

Not bad for a V6! I'm impressed.

[@vakezanimation762]

So we just gonna ignore that big ass srt logo on the spoiler?

[@mattm9087]

@@vakezanimation762it's OK knowing ur letters can be hard sometimes! There's plenty of books with nice big pictures and colors to help tho!

[@stanchybomba721]

VAKEZ ANIMATION it says SXT+

[@marcusbigdaddy6022]

@@vakezanimation762 man the logo is sxt+

[@phchallenger0941]

Got the Atak, pretty loud but not to the point where you look like a douche for just driving down your block at 25mph. Easy to install, now my 6 cylinder actually sounds like a muscle car. Would definitely recommend the Atak if you want something aggressive and tasteful

[@RohanShirodkar29]

Purchased BORLA ATAK for SXT 2019 AWD.. Hands down, the best sounding exhaust ever.. Video cannot capture its sound, no matter how good the camera or sound recorder is. Thank you BORLA.. now every STOP sign and RED light has become fun while taking off..

[@rt34589]

Does it get louder over time ?

[@RohanShirodkar29]

JNIEVES1989 yes it does, its too loud.. and with the sports mode on it also has a loud pop sound when it changes gear.

[@rt34589]

Rohan Shirodkar thanks for the reply just installed mine yesterday looking forward to it being a little louder

[@SIDVENOM]

You mentioned “it’s to loud” is it to the point you will wake up your neighbors in the morning and also attract cops while driving? Also can you hear drone inside car while driving?

[@RohanShirodkar29]

Anthony Gaona there is a good chance you will wake up your neighbors and attract cops at 4.00 am in the morning.. but its only when you push the gas pedal it makes a big sound.. you are on constant speed there is no loud sound.. there is no drone at any speed.. its an excellent exhaust note with aggressive tone

[@nubfisher5686]

I own a 2017 challenger gt contusion blue I just paid off. No more 500 dollar a month car payment! Now I can have more fun, I ordered the Borla Atak Catback and am picking it up after work today! The video sounded and looked great.

[@madflavahightop6192]

Sick af, after having a magnaflow for a while this borla to me is the next level.. I definitely recommend if your going with this style

[@motexlekau]

I JUST GOT THIS EXHAUST ON A 2019 SXT.(ATAK)and I gota say,the video doesn't do it any justice.this thing sounds incredible in person....

[@dokiboki9432]

I thought the same thing, in the video it sounds like a clicking lawn mower but in person, oooof its perfect and worth every penny

[@jasoncoleman8613]

@Mind & Muscle does the atak have a noticeable interior noise when cruising on the highway

[@dariusivory3649]

Did u jus go with the full exhaust? Any deletes?

[@SoChilled1]

Jason Coleman - Had the Borla ATAK installed on my 19 GT earlier Saturday afternoon. No inside drone. Sounds really good on the outside. I’m really enjoying it.

[@RohanShirodkar29]

Planning to buy this

[@Camopar87]

The Atak even makes a V6 sound good

[@KevinSterns]

I have a V6 Challenger with a Borla S-type catback. At low rpm there is very little engine noise in the cabin. So I would say they have successfully filtered those frequencies. Aka "no drone". The sound didn't magically transform from a 3.6L into a 6.4L hemi, but it did significantly improve over stock.

[@Jt_473]

Do you regret not going for the Atak or is the S type good enough? I can’t decide

[@ryanfortin9166]

​@@Jt_473 what you mean is the s type good enough? The s type is the more expensive one

[@Greasiola]

@@ryanfortin9166the atak is the louder one though

[@CJClips420]

Definitely getting the Borla ATAK for mine.

[@aldomartinez3544]

Hunter Buchanan did you get it??

[@dixienormus358]

^?

[@RohanShirodkar29]

Updates?

[@jadriens5822]

Just bought mine and got it Installed it’s amazing

[@drumsybatabamboom8022]

Very cool sound! I've always loved 6 cylinders!

[@thunderfox53]

Damn they actually made the v6 sound good, not to hate on the v6 but thats kind of hard to do

[@vakezanimation762]

Nah not really depends on what engine you have and what you wanna do to it

[@somejackball]

well, Pontiac did it with our old 89 turbo TA, and that was a factory exhaust

[@stephenlanham5627]

That atak sounds delicious

[@Justn7883]

I got my 2018 Challenger SXT a month ago and thought the exhaust sounded a bit throaty. I decided to check today and see what my exhaust looked like. Sure enough I read the letters Borla Atak on all four mufflers. Turns out to be a cat back system! Was having a lousy day and now I feel like I just won the lottery lol 😎🙂 Nice video

[@dream.fiiend]

That's awesome

[@JaysonMontarde21]

this sounds sick for the penta star 3.6

[@willharris4678]

great sound my son has 2018 sxt charger will definitely send this link👍🏾

[@Faust8423]

almost went with the flowmaster super 10's but found a borla atak at a real steal and haven't looked back. best investment imo.

[@BB_Detailing_00]

Borla, thanks for the video! Nicely done with the different perspectives. Good comparison between the two (on same car, same driving). Well done

[@justcallmexbhsx1068]

Im buying the atak this month lol so hype!

[@bf4guy279]

Mine just came in. I'm pumped gonna install it tomorrow.

[@quintinbrown5313]

You SOBs!!! Where the hell was this video at a year ago when I was looking to buy?! Double you, tee, eff. Jk I ended up buying anyways and loved it so much I decided to try and get y’all some more customers for a damn good product. Posted a vid or 2 myself since I couldn’t find ANY videos that showed the newer V6s with a Borla exhaust. Fair amount of views and comments, about 99.9% good reviews. Nice work fellas.

[@HbkDaTeam]

I jus saw you're video and also left a comment. How is your exhaust doin since iss been bout half a year since you made dat video?

[@xpower30]

Witch one you got s-type or the atak?

[@ryanfortin9166]

​@@xpower30 he got the S type. Sounds wicked on his car.

[@tmon3ydadjmbr]

I thought u needed a v8 for this sound like damn it’s really good

[@ffa65]

i'm still a huge fan fo the BORLA-ATTAK exhaust. I would like to add it to my GT AWD. In Switzerland the exhausts have to be not louder than 75 dB(A). How loud is the ATTAK exhaust on a Challenger GT AWD? Could the Attack also be made quieter with a chicane? I would only to have the deep buzzing sound. Would there possibly be a solution?

[@borlaperformanceindustries2548]

Thank you for your interest in Borla! Both our ATAK and S-Type systems are louder than the EU limits. We measure them according to SAE J1492 stationary test and the values for both sound levels usually exceed 90 dB. You could quiet them down with a custom front muffler/resonator, but that will also alter their original sound. If you are a fan of deep sounding exhausts (with more bass), the S-Type would be a better choice.

[@ffa65]

@@borlaperformanceindustries2548 Thank you for your fast response. How loud would the S-Type exhaust be? More than 75 dB? I would like to be able to simulate only the deep bubbling soud of a V8.

[@borlaperformanceindustries2548]

@@ffa65 The 75dB value in Europe is for the drive-by test. Our exhausts are measured in the US according to SAE J1492 stationary test (engine revved to 3750RPM). In that test, S-Type did an average of 89.6dB, ATAK did 94.4dB. The stock exhaust averaged 76dB.

[@hrtl3ss]

Mine will be here and installed Wednesday and I cannot wait!!!

[@devinmiles1929]

How does it sound??

[@jackbenson1554]

So I guess I'm the only one who thought the stype sounds better.

[@3Dirty8]

But mine's a few days ago sounds better than the attack

[@mrlitl06]

I thought the same

[@meme3161]

Atak sounded better to me at first. But I waited on it. Many months later I listened to them again and bought the s type instead.

[@LaReinaHarris]

I think I’m liking this Borla exhaust sound more so than the Flowmaster. I’m not sure but I think I’m going to go with the Borla.

[@blizobraskobaby2478]

Holy shit. I know what I want for Xmas lmao

[@RBBlanco]

Sound good for a v6 both

[@RareAirTwo4]

Straight pipe sounds good, but this sounds better and with no drone.

[@Jt_473]

Are they both legal in California?

[@flashgeist5023]

Is there a way to get it roadleagl in germany? How much DB does it have?

[@brandonhudson5388]

Borla atak is the 1

[@Christinaxoump1]

My challenger does not sound anything like this. It’s quiet. I’m not sure why though

[@kerzon9804]

Been debating on which one to buy for 3 months now for mine cant really decide on the stype or atak

[@ryanfortin9166]

What'd ya get? I'm at this crossroad now. Also looking at Solo Performance

[@Arj1209]

Does it give an interior rumble at idle and cruising speed like a v8(yes, I know it’s not a v8!)

[@dokiboki9432]

Roy J no rumble and no drone what so ever. Windows up It sounds stock inside the cabin but windows down its loud 😂

[@Arj1209]

Dokiboki 94 I meant like a burble where you can actually tell the car is on when it’s idling

[@dokiboki9432]

Roy J oh yeah their is, it has a nice sounding bubbly sound when in idle.

[@Arj1209]

Dokiboki 94 thanks. Appreciate the reply

[@gonzalosanchez6387]

Would the S-Type version for the 2013 sxt be drone free? I see you clarify "newer versions" are drone free, so not clear. Appreciated!

[@SIDVENOM]

Question for Borla is the S-Type and ATTAK exhaust systems Legal in California?

[@borla]

Hello! Both the S-Type and the ATAK systems are legal in California!

[@jinxit5360]

I gotta get that!! My SXT sounded like a newborn 😬😂

[@scotts6596]

Hello Borla rep: Unfortunately I can't afford the costs of either system. Could you please provide the closest mufflers on the rear of the Atak system? I understand they won't be identical. Thank you.

[@nikhildange5577]

would it increase the HP on 2019 challenger sxt?

[@dschneiderkj52]

8-12 according to their website

[@dokiboki9432]

Gave me an extra 9-10hp im pushing 331rwhp in my sxt challenger.

[@mightkilljacksome1487]

@@dokiboki9432 Tune? 80mm throttle body?....?

[@th3gho5t40]

Question for Borla: Is there a version of the Atak exhaust for the 2022 Dodge Charger GT? cause the website says its only for the SXT.

[@borla]

Hi. Unfortunately, we don’t currently have systems that will work with the Charger GT. However, we do have plans to update the tailpipes on our existing SXT systems to add tips that will work on the Charger GT.

[@th3gho5t40]

@@borla will you guys make a video on that system when it comes out? Cause I really love the sound the Atak exhaust has, and its the only exhaust system im actually considering.

[@borla]

​@@th3gho5t40 Our Dodge Charger 3.6L and Challenger 3.6L systems use identical mufflers. The sound is going to be similar between them so this video will give you an idea of what you can expect with the Charger systems! We are only updating the tailpipes to add tips for the GT models.

[@th3gho5t40]

@@borla could you please give a link to see the mufflers you're mentioning?

[@borla]

@@th3gho5t40 Unfortunately, we don't offer the mufflers separately from our systems. Here's our current system for the Charger SXT. Link: www.borla.com/products/dodge-charger-v6-cat-back-exhaust-system-140686

[@_sloth977_2]

So conflicted on which one to get guys help

[@shanebanich1498]

If you put h pipes on their too would it sound even deeper?

[@heatedk]

Borla does it sound deeper in person?

[@vincelally9328]

Getting ready to pull the trigger, but still on the fence as to which one i like best. Hard to say from a recording. I do have a question as far as the tips. I have a 2019 Charger GT, does this kit reuse the stock tips? I havn't looked yet but if so do they need to be bolted on or welded?

[@borla]

Our Cat-Back system for the 2019 Dodge Charger reuses the factory tips. It does not need to be clamped or welded on to our system. If you need help finding a part number for the Charger systems please let us know. The Charger and the Challenger have different systems.

[@vincelally9328]

Borla Performance Industries I like led closer and my factory tips are welded on so I would have to get new ones

[@mattm9087]

On the fence between the two but definitely going borla. Any performance differences between the two or only sound profile? Can't seem to find anything on the website

[@borla]

Hi! The only difference between the two is the sound. The ATAK is the more aggressive system.

[@mattm9087]

@@borla thanks👍👍 that's what I figured wanted to double check tho

[@mattm9087]

I ended up putting the s type on and God dam it sounds good. Borla alllll the way

[@brafrebasket]

Both sound very good I am about to get the S type for my challenger gt there anyway I can adjust dual tips and this system without getting out that much of the car body

[@borla]

Unfortunately, we don't have an option with tips for our Cat-Back systems. It reuses the factory valance tips on the Challenger.

[@ObadaSaleh]

Hi, did you get the s type, if yes can i have a feedback from you

[@JaspreetSingh-ew8ek]

is that atak legal in canada ?? and how much does it costs?

[@volcom2445]

Would a 2017 Charger SXT have the same sound and tone as this? There's almost no videos that show either of these cat-back systems. Same motor but the problem is some people are saying the charger has a different sound than the challenger.

[@newkankarsh9269]

www.borla.com/dodge-charger-se-sxt-exhaust-systems/

[@volcom2445]

@@newkankarsh9269 I know Borla sells a system for the charger, I just wanted to know if they sounded the same. The one video of a charger sxt with the Atak system sounds different than a video of the same year challenger sxt. Borlas website only has a video of the Atak system on the challengers, no chargers

[@newkankarsh9269]

@@volcom2445 idk

[@shanebanich1498]

Is their a video comparison of the axle back and cat back set ups? How much better and deeper toned is the full cat back?

[@borla]

Hello! This video is of our cat-back systems. We do not offer axle-backs for this vehicle.

[@PonyCarCam]

How’s it sound from the inside?

[@mjg1312]

Are there solely muffler options for the SXT? I've looked around and each search just gives me a whole new exhaust system. I just want to replace the mufflers on my car.

[@borla]

Hello! Unfortunately, we do not offer direct fit muffler replacements. We do have universal mufflers if you are interested.

[@mjg1312]

@@borla I will check them out, thank you!

[@Later2u]

My 2019 Charger GT already has a similar set-up from the factory. What mufflers and resonators do I need for the ATAK sound? Dropping this much coin would be a little overboard just for the sound. I do have a BORLA exhaust on my '04 Hemi truck and it does sound awesome, but even that system was half the price of this one.

[@SIDVENOM]

Question for Borla: Does the Borla Atak exhaust system for the V6 will also fit on a RT or Scat pack in case from upgrading the car in the future.

[@borla]

Hi! The V6 Challenger Cat-Back systems won't work for the Challenger R/T or Scat Pack.

[@mc996cars1]

This is to Borla, Does this car have a cold air intake or any other mods while testing these exhaust systems or all stock?

[@borla]

Hi! The cars in our videos do not have any other engine performance modifications, only our Cat-Back exhaust systems.

[@mc996cars1]

@@borla Thanks for the quick response. Can you please provide the parts numbers for the s-type and Atak for a 2020 dodge charger GT V6? Thanks

[@borla]

The S-Type part number is 140649. The ATAK part number is 140650. If you plan to purchase a system, we recommend ordering from one of our dealers as they will have the better price. Our dealers are typically about 10% off of MSRP.

[@johnkerr1823]

I have a 2019 sxt plus & I had problems with it properly fitting, I had to go back to the shop 3 times. After the first initial install of the product the back resonators were not lined up well and it was causing metal on metal to vibrate. I took the car back to the installer and he made a fix, but the caused the tips to rest into the plastic valance .The 3rd visit he cut 2" off of the pipe on the mid muffler, It appears to line up properly now and so far no negative effects. I'm rather disappointed with the amount of extra time and money spent making a direct bolt on fit. It also appears that customer service doesn't really care about this. I had spoke with a few and sent pictures in, but in the end had to resolve the problem myself. The exhaust does sound great, but I'm not happy with the fact that I paid a premium product and had a lot of BS to deal with. Borla couldn't even offer an apology or free shirt or something stupid.

[@borla]

Hello, I'm very sorry to hear about your experience with our parts and customer service. That is definitely not what you can expect from us. Please reach out to our Customer Service Manager regarding this matter and we will be sure to take care of you. His email address is [e-mail]. Again, I apologize for the trouble. Thank you.

[@ffa65]

Question for Borla: Is the BORLA-ATTAK exhaust system approved in Switzerland? I would like to add it to my GT AWD. Regards from Switzerland

[@borla]

While we haven't attempted to homologate any Borla ATAK systems for approved use in Switzerland, the ATAK line is probably far too aggressive to ever be approved anywhere in Europe. You guys require very mild sounds and we have other product lines that are a better fit for your requirements. Please contact us for more details.

[@DarkFire215-u3z]

I have 2019 Challenger GT. Probably, a question for the dealer. But, would your ATAK exhaust void my warranty? As much I want to do this mod. Keeping my limited bumper-bumper is important.

[@borla]

Hi. Thanks for contacting us! If you are in the U.S. it will not void your warranty under the Magnuson-Moss Warranty Act. Thank you.

[@pablon7465]

Hey erick bro i am looking to buy the same car did u end up making the upgrade how is the sound?

[@DarkFire215-u3z]

pablo N You’re going to love this car! I haven’t made the upgrade yet. The sticker price for the part has kept me making it just yet. But, I’ve heard only good things and high praise regarding Borla for this Exhaust from multiple car enthusiasts.

[@SIDVENOM]

Hi Borla, I have Questions for your product. I have a 2015 Challenger SXT Plus Fully loaded version and it came with the O.E.M Mopar Cold Air Intake. I would like to know by adding the Borla ATAK system will it add more horsepower and if it does by how much? Also would like to know if the Borla ATAK system will be louder due to having a Mopar Cold air Intake or the sound will be the same like in the video?

[@borla]

Hello! You can expect a gain of 5-6 horsepower with our systems. The cold air intake isn't going to affect how our exhaust system sounds.

[@cameronjones305]

Atak for sure

[@marcogalvan4468]

Hi Borla, I currently have a V6 Challenger SXT, I have always wondered which one I should get, S-type or Atak? I was afraid of getting an Atak because I didnt want it to sound too obnoxious and loud. Personally, which one would you recommend? Feel free to DM me. Thanks.

[@Korupt81]

Did you ever find out what's better. Atak or s-type?

[@hondurasallday123]

@@Korupt81 The answer is still pending.

[@chriscanhoto8554]

Do you have one for the 2017 ram 3.6l v6... Or what one would be

[@borla]

Hi. Thank you for reaching out! Unfortunately, we do not have a system for the V6 Ram. Sorry about that. We do offer universal mufflers. If you are interested please call us at 1-877-462-6752(Monday-Friday 7:30am-4:00pm PST). Our techs can assist you in finding a universal muffler that can work for your application.

[@chriscanhoto8554]

What one could i git that sounds like the one on the video.

[@MarcusLamandt]

Getting the Borla Atak in a few days on my 2017 Challenger GT. Wish me luck.

[@trustinedwards9958]

How’d it turn out?

[@MarcusLamandt]

@@trustinedwards9958 better than I could have dreamed.

[@SIDVENOM]

Is the sound very loud! to the point you will wake up your neighbors in the morning and also attract cops while driving? Also can you hear drone inside car while driving?

[@MarcusLamandt]

@@SIDVENOM No, only loud when you floor it. Otherwise its fairly tame. Cops have so far left me alone, no drone in car.

[@trustinedwards9958]

Anthony Gaona its only loud when you floor it. There’s no drone as well so You’ll forget you even have it on

[@97N1]

How much the atak ?

[@borla]

Hi. Thank you for your interest. Here is a link to the ATAK system: www.borla.com/products/challenger_sxt_gt_v6_catback_exhaust_atak_part__140650.html You will see MSRP on the page, but we recommend ordering from a distributor as they will have the better deal with free shipping in the U.S. You can find links to some of our distributors on the product page.

[@brandonlugo9661]

Hi so I currently have a Cold air intake and a stock exhaust it gives it a deeper tone I want to have the deepest sound not necessarily the loudest I like the Atak but also don’t want it to be Ricey. The dealership mentioned the Mopar performance exhaust is that made by Borla ?

[@borla]

Hello. Thank you for reaching out! We do manufacture some exhaust systems for Mopar Performance, but not all of them. If you have the part number of the Mopar Performance system we can check if it is a system that we made. Please keep in mind that those systems are made according to Mopar's specifications. They will be slightly different from the Borla branded systems.

[@brandonlugo9661]

Okay would y’alls be louder I am thinking of the S type but I would like the Atak I just don’t want it to be ricey. Which would you recommend getting for a loud, deep tone ?

[@brandonlugo9661]

I also didn’t mention I have a 2018 charger

[@borla]

If you are looking for a lower tone, I would recommend the S-Type system. The S-Type is not going to be as aggressive and loud as the ATAK, but it is going to have a slightly deeper tone than the ATAK.

[@brandonlugo9661]

So I got the Borla S type for my charger from Autohance.com is that a trusted source ?

[@mcoffey4005]

How come you can't get the dual tips like for theR/T....i think #43? I want this exhaust but also those square quad tips

[@thunderfox53]

I think you could but you need to get the 5.7 version, these exhaust are only for the v6 as they have a different pipe diameters

[@thunderfox53]

But eitherway you can always get custom tips

[@omarespinoza1993]

Thinking of buying this for my challenger the atak but I can’t seem to find out if it’ll cause any problems or issues with the factory warranty , will it void my warranty ?? Please I want to know thanks !

[@borla]

Hi. Thank you for reaching out to us! A cat-back exhaust is legal and will not void warranty. Under the Magnuson-Moss Warranty Act, a dealership can't deny you of your warranty if you only have a cat-back exhaust system. Cat-back systems also retain the factory catalytic converters so it is emissions legal. Thank you!

[@acenobody3618]

Borla Performance Industries do yall have one for the 2018 dodge challenger v6 ?

[@mightkilljacksome1487]

@@acenobody3618 Both systems fit 2015-2020 V6 Challengers

[@raulnav81]

I have a v6 SXT 2018 challenger...ong.. which once shall I pick?

[@isaacbeato1743]

Go ATAK go big or go home. I just received mine and I'm installing it tomorrow!

[@raulnav81]

@@isaacbeato1743 Let me know if about the install is it a plug in play or requires any welding? Thanks

[@isaacbeato1743]

@@raulnav81 so I went and got it installed at a local muffler shop for a 100 bucks. They just cut the piping after the cat converters and then replace everything all the way back to the exhaust tips. The sound is awesome but its not as loud as when I had my muffler delete but definitely sounds similar to a v8. Definitely recommend

[@raulnav81]

@@isaacbeato1743 Thanks for that info bud much appreciated.

[@dschneiderkj52]

@@raulnav81 thanks for the report, I've definitely been searching for an exhaust to have the muscle sound my 2018 Challenger deserves, after searching everywhere, this is still the best exhaust. Gonna be a few paychecks before buying the ATAK though.

[@freddygomez4699]

Would the borla Atak fit on my 2018 charger ? I have a craptastic exhaust.

[@borla]

We have a separate system for the 2018 Charger V6. Here's the link to the ATAK: www.borla.com/products/dodge-charger-v6-cat-back-exhaust-system-140686 We recommend ordering from one of our dealers as they are about 10% off of MSRP. You'll find links to our dealers on our product page.

[@freddygomez4699]

@@borla thank you so much!

[@borla]

You’re welcome!

[@willsmiths6542]

What is that "ssssss" sound?

[@blizobraskobaby2478]

felipe shimits most likely CAI

[@nestorcordova28]

Just ordered this and I am trying to find out if there is any drone, I am seeing a lot of mixed reviews.

[@borla]

Hello. Thank you for reaching out to us! This system along with our other systems for recent vehicles will not drone.

[@marksolomon6089]

Which one did u go for the s-type or the atak?

[@nestorcordova28]

s-type and yep no drone, had 5 different people in the car to listen and they all agreed.

[@TheBarrios69]

$1,500 bucks yikes! But sounds tough enough on a challey.

[@josephallen8044]

Borla: You ever going to make the attack muffler for the focus St.

[@borla]

Hi. Thank you for your interest! We do plan on offering an ATAK system for the Focus ST.

[@Agentricochet13]

How much louder is the atak? I have a 2017 GT awd (Also, I have the dirt sport exhaust on my dads FJ cruiser and it sounds great)

[@SF.Automotive]

Its loud!!!!

[@hondurasallday123]

@@SF.Automotive how loud?

[@SF.Automotive]

@@hondurasallday123 loud haha

[@dokiboki9432]

Its loud but in a good way, not loud to the point where its all like “why your car so loud but your so slow” kinda way.

[@davidjimenez3900]

Will putting this exhaust system on cause a check engine light?

[@borla]

Hi. Thanks for reaching out. Installing these systems will not cause a check engine light.

[@vinoob25]

any other mods or just full cat back exhaust swap ??

[@borla]

Hi! The only modification is our Cat-Back system.

[@vinoob25]

@@borla will it fit on a 2016 Charger SE,,,i hope SE & SXT+ exhaust set up is different..SE has single mid muffler ....and SXT + has 2 mid mufflers like xpipe

[@AutoNstuff]

I just got my Borla Atak exhaust to check it out on my channel I got a yellow jacket challenger! It’s a awesome exhaust!! Best on the market!

[@luciusael]

Honestly this sounds better to me than a V8 (unless the V8 has long tubes)...spectacular

[@Antarpunitsingh]

I got Borla s type for my v6 last week but having some drone issues at 1500 rpm . It's very annoying.

[@borla]

Hi. Thank you for reaching out! I'm sorry to hear about that. Please give our customer service department a call at 1-877-462-6752(Monday-Friday 7:30am-4:00pm PST).

[@peacebestill2653]

Will the charger sound like this?

[@borla]

Yes, our systems for the 2015-2021 Dodge Charger V6 will sound similar! Please let us know if you need part numbers for the Charger systems. We offer Touring and S-Type as well.

[@TheMarchetti]

someone know if it sounds better in a catless system or it's made to work with oem cats?

[@borla]

The exhaust system retains the factory catalytic converters. We do not recommend removing them as you will not pass emissions testing.

[@Antarpunitsingh]

confused b/w borla S-type and atak .Any suggestions?

[@borla]

Hi. Thank you for your interest! The ATAK system is going to be the louder and more aggressive sound level. The S-Type is not as loud as the ATAK, but it is still a significant increase in sound and tone over the stock system. The ATAK will have a slightly higher pitch and the S-Type will have a lower, deeper tone. The difference is a little hard to tell in the video. It's difficult to recommend a sound level since it has a lot to do with personal preference, but we hope that this helped a little. Thank you!

[@hondurasallday123]

Sissy type and you have the attack mode.

[@nicolasjabana5800]

Do you guys sell the Atak for a Charger?

[@borla]

Yes, we do! Are you looking for a system for the 3.6L, 5.7L, or the 6.4L?

[@nicolasjabana5800]

Borla Performance Industries 3.6 can you send me the link please?

[@borla]

What year is your vehicle?

[@nicolasjabana5800]

Borla Performance Industries 2016 sxt

[@borla]

www.borla.com/products/300_charger_catback_exhaust_atak_part__140686.html If you are interested in purchasing, I recommend ordering from one of our distributors as they will have the better deal with free shipping in the U.S.

[@BamBam-cr4yz]

Please tell me that this same sound can happen on the 2011 Dodge Charger V6

[@daskoski218]

Bam Bam hoping it does ordered mine should be here Monday

[@mcm95403]

It sounds great, but not $1600 great. EDIT: I tried the "Tim B" magnaflow copies and they suck, way too much drone and cabin noise. My S-Type system will be here Monday, found it for $1450 on E-Bay.

[@rickyrick476]

mcm95403 1600 ? Mine was 1200

[@dokiboki9432]

Still sounds like a lawn mower in the video but in person it sounds WAY better

[@Jt_473]

Atak or s type?

[@dokiboki9432]

J M I have the atak

[@gerardocarrillo2548]

Can I put this exhaust on my v6 gt and does it turn on any engine check light on. And can I take it to a mechanic to install?

[@borla]

Hello! Yes, this system will fit the 2015-2019 Challenger GT AWD. Installs can be done at home or taken to a reputable shop in your area.

[@gerardocarrillo2548]

Borla Performance Industries would it make any engine light turn on if so how would I be able to take it off

[@borla]

I apologize, I forgot to address that in my original response. It will not turn on a Check Engine Light.

[@gerardocarrillo2548]

Borla Performance Industries thanks for reply and hopefully I will be able to buy one soon

[@jaimevega5991]

Borla Performance Industries do y’all have borla atak for 2014 v6

[@acenobody3618]

Do yall have one for the 2018 dodge challenger v6

[@borla]

Hi. Thank you for your interest! These systems are for the 2015-2018 Dodge Challenger V6. We have links in the description for the S-Type and ATAK system. If you are interested in purchasing I recommend ordering from one of our distributors as they will have the better deal with free shipping in the U.S. You can find links to some of our distributors in the product page.

[@marksolomon6089]

Planning on getting the exhaust but which one have the more deeper sound of two? Is really hard to tell on the video than in person.

[@borla]

Hi. Thank you for your interest! The S-Type system is going to be the deeper sounding system.

[@marksolomon6089]

Borla Performance Industries so will u recommend the s-type over the atak? I don't really care how loud it is i just want to it to sounds deeper and a little raspy but not to raspy.in scale 1-10 how much how loud is the s-type compare to atak.thans in advance

[@borla]

The ATAK system is going to be the louder sound level, but the S-Type is going to have a slightly deeper sound. The ATAK will be the slightly raspier system. The difference is a little harder to tell in the video for the V6. The difference between the S-Type and the ATAK on the V8 is a little more noticeable.

[@raymyers5]

If adding a cold air intake and the Attack exhaust. Will the motor need retuned or factory setup still acceptable?

[@borla]

Hi. Thanks for reaching out to us. You will not need a tune for a cat-back system, but I cannot speak for the cold air intake. You might want to check with the manufacturer of your intake. Thank you.

[@raymyers5]

Thanks for the response. S-Type is coming right after Christmas!

[@Tigerwolf291]

Are these really drone free? I’m very sensitive to drone but want something louder over stock on my V6 Challenger so looking at the S Type as I don’t want too loud.

[@borla]

We guarantee that you will not experience any drone with our systems!

[@PerspectiveMotivational]

How loud is the atak

[@borla]

In our testing, on a vehicle with no other modifications, part number 140650 averaged 94.5 dBs using test standard SAE J1492. Please note these tests were performed on a vehicle that was completely stock with the exception of part number 140650.

[@robertlawrence9000]

Anyone know of any dyno specs on these?

[@dokiboki9432]

Robert Lawrence not exactly sure, but I got my 2016 Sxt challenger dyno after I got my exaust on before and after. Im pushing 331rwhp n 304Ibtq. With an afe CAI and the borla atak.

[@reptarthetrx2408]

I'm about to buy a Borla Muffler for my wife's 2016 V6 Jeep Grand Cherokee.

[@JJ-pc7sw]

So no drone at any RPMs? Drone has made me regret purchases before so for this kind of money I'd need a guarantee of no drone.

[@dokiboki9432]

I got it for my sxt plus, no drone at all it literally sounds stock inside the cabin.

[@marksolomon6089]

Which one Is more louder or more aggressive sound?

[@borla]

Hi. Thank you for your interest in our products! The ATAK system is going to be the louder and more aggressive system.

[@marksolomon6089]

Borla Performance Industries both sounds really nice.thanls for the reply.any promotion code or discount code?

[@borla]

Unfortunately, we are held to full MSRP plus shipping. I suggest you order from one of our distributors as they will have the better deal with free shipping in the US. You can find links to some of our distributors in our product page. Thank you.

[@eddycarrillo48]

What's the price on this?

[@borla]

Hi! Our ATAK Cat-Back system has a price of $1,493.99 and the S-Type has a price of $1,655.99. Please see the links below. S-Type: www.borla.com/products/dodge-challenger-sxt-cat-back-exhaust-system-140649 ATAK: www.borla.com/products/dodge-challenger-sxt-cat-back-exhaust-system-140650

[@chriscanhoto8554]

If i can find out what muffler the atak uses i can make one

[@chriscanhoto8554]

Wouldn't it be the same as the 14650

[@chriscanhoto8554]

140650

[@chriscanhoto8554]

Can i find the muffler that's on the 140650 kit