Bosch Cordless Brushless Drill Restoration/Gearbox Rebuild/GSB 18V-EC

[@patjohnson3100]

Very nice renovation. This high quality drill will continue to operate at its peak for a long time to come. Respect from the USA.

[@haajee1]

Thank you for the good tip for placing the locking ring back at 11:40. i have a cheap chinese drill with almost the same gearbox. The instruction to put in gear 1 was very helpfull

[@LuisMendoza-jt9gz]

Thank you for the video. This helped me figure out how to put my makita back together since the gear assembly was similar.

[@b.o.b.7125]

Very helpful video with great detail! I was able to successfully rebuild my drill using this video as guidance, thanks!

[@Freie_Energie_vom_Dach]

Ich mag die blauen Sachen. Diese sind sehr Reparatur freundlich konstruiert.

[@najindustrolizovanij]

nice refresh. spindle lock on mine never worked ok, always sliping when tigtening chuck.

[@Abdelhamidbarzac9954]

Bravo Respects pour votre travail From Rabat, 🇲🇦 Morocco Peace out

[@alexeyparamonov2503]

Второй инструмент посмотрел, отличается от другого. Работы больше. Отлично! Понравилось! 👍

[@franciscojosesabino9942]

excelente explicito Barcelona Venezuela ,francisco sabino,gracias señor.

[@shamoolkhanhorrorchannel5712]

Nice way u have done

[@Anuxr]

Thanks! It really helped me! But I did it on a Bosch Flexiclick 18v

[@e.p.yoneda3641]

Beautiful work.

[@Electrico-X64]

Excelente video, que tipo de grasa utiliza para lubricar los engranajes?

[@ToktokPhone-u1l]

Wow very good Boss thanks kyou😊😊

[@tienha8863]

Hope to have more videos of Bosh battery drill

[@kashi2843]

exceptional work and professionalism on the job great to watch. I was wondering one thing only - when you used the electrical contact cleaner on the stator/field wouldn't that disrupt or remove the enamel protection of the winding? if that happens it would be quite dangerous and could easily short anytime, Also one suggestion: if you had disengaged the keyless chuck from the impact drill before opening itself, you could also clean the primary shank shaft and the torque selector from inside - will appreciate any comments you ave on both. Great work!!!

[@AlexBRestoration]

Hi,thank you for comment.I used electronic spray from liqui molly this product is not fast dry to distrupt or remove the enamel protection of the winding.🍺🍺

[@Electrico-X64]

@@AlexBRestoration Hermoso video, que grasa utiliza para lubricar los engranajes?

[@ccmogs5757]

I own one of these & mine also seems a bit tired but i don"t think i"d have the confidence to strip down & re-assemble myself

[@siup102]

Eizelfutter kann man also nicht wechseln :) Bravo Bosch immer beser aber nich für kunde. super film danke.

[@Saleembinaziz]

Well done sir

[@AlexBRestoration]

🍺🍺

[@19kreeper]

do anyone know if at 7:14 there are a bearing inside or just a basic bushing. I see on another clip on a 10.8 volts having a bushing there, but on this more powerful dril have a bearing maybe?

[@AlexBRestoration]

Is a bearing there🍺🍺

[@19kreeper]

@@AlexBRestoration Thank you very much, i see a lot of video with other brands that have a bushing there. You know if that bearing can be replaced at need? I own 3 tools: GSR 18v-EC , GSR 18VE-EC, GSR 18V-110C

[@jamesfarmer3032]

Hey nice vid, I have broken three keyless chucks on these drill in the last 4 months. They get jammed fully open so easily, that's happened twice. Now I have a chuck that won't tighten after stripping and putting back together. Annoys me as it's not a cheap drill!

[@優さん-n7m]

what is a keyless chuck ? what does it mean that it broke ?

[@normajeancaballero7959]

Nicely Done 👍😁👍😎👍😁👍

[@SW-ok8qr]

Excellemt and no talking shit umlike others. Thank you!

[@jesusluison]

Excellent DEMO CLEANING ✅✅✅💙💙💙

[@Henrique-xz3zx]

Gostei muito top 👏 parabéns

[@raghuraman5956]

Excellent 👌

[@mateuszsielicki9135]

What grease do you use ? And what is the difference between yellow one and blue one. Great job btw.

[@thiagodias6951]

Hi! I’m disassembling my Bosch chuck and I’m stuck in the part that you seem to press side buttons and remove a cap with bearings. It just comes out that easily or do I need to do something first? I appreciate your help!

[@kuldipvirk4760]

Hi there its perfect job you done , i have a questions plz reply me if u can i have got same drill , but gone wet bottom part 3 inch water all night from bottom, I cleaned all bottom part from inside with petrol , but still not working with other battery, thanks

[@AlexBRestoration]

Hi thank you for comment, you can try to dry the drill with a hair dryer, maybe it's working and next time use contact cleaner not petrol,sorry for my bag English, i hope you understand me.

[@genysys1511]

Is it better a brushless type compared with a carbon brush type

[@AlexBRestoration]

Yes,much better

[@bahroz7173]

Hi what mid torque impact wrench would you recommed.? Ryobi or anything nearly 200 bucks

[@valbetoferreiradejesus474]

Muito bom.

[@AlexBRestoration]

🍺🍺

[@aka3267]

Thank you

[@javicarro5542]

exelente trabajo

[@jafarsidik7454]

Saya pikir bor cordlessnya masih bagus dan tidak bermasalah, bekankah demikian?

[@merkelmerkel3986]

Top gemacht man. Aber eins hast du nicht gemacht. Du hättest die Bolzen von den Zahnrädern auch fetten können und dann die Ritzel drauf mache. Solle . Aber egal top gemacht.. komme sicher auf mich auch noch zu...

[@christophgehnen5373]

Which torx bit size did you use to remove the screws from the casing?

[@gronexd4918]

Excelente

[@thomasmFR]

Hello and thank you for this video! I have a Bosch PSB 530 RE, and it's stuck on hammer mode. I can move the switch, but it does nothing. Do you have any idea of how to fix this ? Thanks

[@chessrr]

Great Job!

[@petar-boshnakov]

I don't think you are supposed to oil the outer face of a sealed roller bearing nor the inner one for that matter... This part is not supposed to spin. If you want to oil the bearing - try injecting grease inside the bearing or just replace it.

[@lykos30]

What kind of grease do you use ??

[@AlexBRestoration]

Thank you for watching, the grease is liqui molly lithium grease 🍺🍺

[@lykos30]

@@AlexBRestoration very beautiful work. :)

[@alekpop1625]

Is it new hou much time you use

[@AlexBRestoration]

It's 4 years old and used every day.

[@alekpop1625]

@@AlexBRestoration jeah nice time for clean and graease. Does it perform good and strong and buttery .see ya from zlatibor .ue

[@MundoGrandeDoSul]

Sensacional!

[@ianwood8223]

Hallo Alex I’m new to your channel and I’m not suggesting your an amateur with regulars to tool renovation but I certainly am and repair my own tools when required but could you tell me the name of the blue lubricant you use on the mechanicals please . I would also like to thank you for the effort you make to produce the films thanks.

[@AlexBRestoration]

Hi.I used Liqui Moly Lithium grease

[@Neslekkim]

@@AlexBRestoration Found that you used this one in the Metabo video, so I guess you use the same here: www.amazon.de/2x-LIQUI-MOLY-3406-Litho/dp/B06XJ4XN7G

[@mimmorefriger]

ti posso mandare il mio avvitatore?

[@michellrojas2752]

👏👏👏👏👏👏👏

[@Utking3]

Do you know how to change the chuck to another one? :)

[@wessleymcgovern52]

Great video, Alex! I have a Makita 6391D corldess 18V drill that I love. I'm cleaning it up and would greatly appreciate a suggestion for what type of cleaning solvent and lubricant is best suited for the gearbox/chuck. Cheers!

[@AlexBRestoration]

Hi thanks for comment,for cleaning I use petrol (for me is the best ) and lithium grease,and for chuck oil or wd

[@wessleymcgovern52]

@@AlexBRestoration Thank you! Cheers

[@danstheman33]

What type of lubricant did you use on the gearbox? That blue stuff didn't look like lithium grease. Also I've heard that too much grease in a drill can cause problems, by getting into the motor windings or something.. I'm not sure if that's too much.

[@AlexBRestoration]

The grease is liqui molly LM 50 lithium grease ,i used this type of grease on every drill without problem.🍺🍺

[@hamiltonbeach1451]

😲 wow

[@alandavila8050]

Era que le des una pintadita al broquero

[@robertcasey3528]

Thought it was AvE but watched anyway

[@knivectsh]

It’s always ironic seeing a drill being repaired by a drill

[@silverxiree]

thanks for the video but there is no repairment held, hence it might be a reassembling. Not rebuilding. Disassemble, clean, grease and assemble. That's all.

[@samuellungu937]

😂unde ai învățat să pui vaselina pe exterior la rulment cind ai asamblato min14:10😂

[@ianwood8223]

Hallo I’ve just made the comments above can you also tell me how to spell regards too.

[@arturocruz2025]

Lo único que no me gusto fue no revisar el estado de los rodamientos.

[@stanley5049]

👍

[@bigworld7514]

👏👏👏🤝🤝🤝👍👍👍

[@CallMeSnake89]

Found your toutube from Company Of Heroes lmao. Toxic.

[@fandeldiario8719]

Like dissaembly

[@PepsiMax65]

Че за немое кино))

[@earthstrong7855]

wear some gloves bro

[@sergeilushkin4089]

Такими руками только говно месить

[@ВасильПіддубний-ь5ц]

соссиянца видать из далека😅😅😅

[@1521joe]

Perfect.