Bosch GRG 18V 16 C Cordless Rivet Gun vs Parkside PBNSG 20-Li A1

[@BonsaiDax]

Hi folks, here in Germany the PBSNG 20-Li A1 is available on June 13th in our local stores ( 50€, probably online then too ). 😎

[@StepperByStepper]

The 12V cordless planer has also a brushless motor, although its a green labeled powertool.

[@noddybrian1158]

Thank you for an excellent fair and honest review against Bosch -for the low price I think it did very well - intersted if we ever see one available to buy.

[@StepperByStepper]

Just store the parts in the cup, no problem.

[@fuloplehel]

Great video and comparison. I don't know why this bosch is so expensive, one of the most expensive on the 18V platform. But if the parkside is around 100 euros, I will buy one. For aluminum rivets it's okay.

Thanks for the vide, but compaering stroke length is not as relevant if you are not using anything to acually rivit. Every pop rivet has a range fo material thicknis they are supposed to be used. Would be intressting to see if the diffent lenght makes a diffrence.

[@icku]

Yes indeed, but not always you have the correct rivets for the given application and you can end up using longer - happens to me a lot. In that case having longer stroke length is only an advantage.

[@inoid724]

Thank you, very good review !

[@soldier9927]

do you know by any chance whats the difference between cordless performance chainsaw PPKSA 40-Li A1 and PPKSA 40-Li B2 ? there is no info about which one is better, thank you!

[@Kowalski94]

Thanks Again for your work ❤

[@icku]

You're welcome 😊

[@StepperByStepper]

I dont think 16mm are too long, because you dont need a full contraction of the rivet, you can substract the material thinkness.

[@icku]

You are right to some point, but then why Milwaukee has a rivet gun with an even bigger stroke length of 30mm. My guess is that in some cases you cannot always have suitable rivets for the given application and having bigger stroke length can come really handy

[@StepperByStepper]

@@icku I was talking about 16mm, not about 30mm ;) Yeah probably some special cases need those long rivets, but 99% of the cases dont need them. And if you do, do the job simply in two steps. Much more important is that the feeding mechanism works well over long period. Talking form experience.

[@StepperByStepper]

PS: By the way, a automatic pneumatic riveting gun from Parkside allready exists...

[@krystian8508]

No so bad it seems. If Parkside gives a decent price, why not for some occasional use.

[@TinTran-mp5kx]

thx for the comparison

[@Robert--cm2nf]

Again a perfect tool from Parkside for a price that makes Bosch look like Hamilton to Parkside with Max Verstappen

[@ChrisK6601]

i Saw a post about a 100 euro radio, but i can find it anymore, can you share me the photo?

[@arminkojer2990]

Hallo, wann gibt es die elektrische Blindniet Niedgerät in Deutschland zu kaufen. Danke für die schnelle Antwort.😀

[@icku]

I have no information. I do not work for Lidl ☺️

[@BonsaiDax]

Kommt für 50€ am 13.6. in die Läden, wird dann vermutlich auch online erhältlich sein. Wird auf jeden Fall gekauft. =)

[@leonbratec5459]

Can you share link to shop parkside rivet gun?

[@carlosdangerfield9477]

you can get 14 of that parkside for the price of one Bosch.

[@rienmachien8449]

Until you need something that lasts, went through a lot of parkside battery tools already 😅

[@Failsafeman100]

AllHandmade: 1 Corporate pressure to cease and desist: 0

[@moforatos]

Parkside it's the green series no black series performance brasles motor

[@klepa1800]

very nice tool

[@icku]

I think so too!

[@farzadv2007]

Can you do a tear down video?!? Please 🥺

[@icku]

A tear down? Did you watch the whole video?

[@DiaboloXXXVI]

600 vs.40 Euros

[@antenassalvado-com]

Donde se puede comprar desde España? En la web de lidl España, no la veo. Gracias !!