Bosch GSH 5 E hammer not hammmering, full stripdown clean and service demonstration.

This is a 2002 Bosch GSH 5 E hammer that is no longer hitting.
The oil has all burnt up and someone has replaced it with high temp grease. Thos one needs a full stripdown to clean out all the old grease before fitting a service kit and replacing all the seals and bearings.
It's worth noting that these service kits are good for getting hammer hitting again, but they do not include and oil seals or bearings. These need to be purchased also.
It's amazing what a 130 euro repair can do for a 600 euro tool.
#bosch #hammer #tools #powertools #gsh5e #boschhammer #kango #repairs #toolrepair #demonstration #powertools #dirty #workshop #repairshop

[@frankward423]

I just recently found your channel. It's a breath of fresh air in today's disposable society. Keep up the good work.

[@deandohertygreaser]

Thank you! Will do!

[@robinbeckford]

I'm impressed with the way you chuck the parts on to the bench during dismantling . Wtith my limited experience of power tool overhaul, I place them in a row in the order they come off! Enjoy watching your work - thanks.

[@littlebrook106]

Thank you for making this video. Without it I would have not known the reason it stopped hammering or how to strip it down, especially that clip deep inside the barrel. One service kit later and it’s back up and hammering again! Thanks again 😀

[@CrookedSkew]

A pleasure watching you work. It's genuinely great to see old tools being fixed and sent back to work, especially in this increasingly disposable world we live in. Thank you.

[@jtobiassmith]

It looks like you used at least three different lubricants on re-assembly. A thicker grease in the syringe, a lighter colored thin grease you brushed on, and the oil. Would you mind sharing their names and why each is used for those specific components?

[@jasonbuckler190]

How long did this rebuild take you in real time? Just curious.

[@rajsahu8692]

Nice works 😊😊

[@barriehutchinson9666]

You are a magician Dean

[@leeberry9666]

Great video Dean. Tell me what is the biggest tool you work on.I watch all your videos and have yet to see a bandsaw repair or a table saw. Do you not get involved with the bigger stuff. Great watching.

[@vitorcosta8765]

It is something that really soothes my day, the all process of reconditioning and rebuild is soo good to achieve. Except when we can’t…

[@jonathansimpson4593]

I like how he just throws everything on his work bench. I would get lost

[@ericblanchet3961]

Bonjour j'ai le même problème que toi ou trouver les pièces el les références merci belle vidéo

[@deenp3761]

How can you tell when the bearing is bad ?

[@deenp3761]

How can you tell when the bearing is bad ?

[@birdjohnson736]

That happened too, put new switche then work.

[@willlian8385]

Estou com um martelete desse ele nao esta entrado a broca (ponteira) pode me ajudar

[@LeadingInnovations]

Looks like the cable was a bit loose where it enters the case.

[@nelchan2421]

re upload?

[@deandohertygreaser]

Yea, messed up earlier and some how deleted it.

[@nelchan2421]

@@deandohertygreaser 😅

[@gacherumburu9958]

👍👍

[@robertonogueiracoach7382]

😂😮