Demolition Hammer Refreshment | Bosch GSH 5 E Professional; 12 J; SDS max

Model: GSH 5 E
5-kg Demolition Hammer with SDS-max GSH 5 E. The chisel specialist with low weight. Due to the powerful 1100-watt motor with up to 12 J impact force, the GSH 5 E Professional sets new standards in material removal.
Technical data
Rated power input: 1.100 W
Impact energy: 2 - 12 J
Power output: 650 W
Impact rate at rated speed: 1.300 - 3.000 rpm
Weight: 5,5 kg
Length: 455 mm
Height: 235 mm
Toolholder: SDS-max
Material removal rate in concrete of medium hardness, approx.: 180 kg/h
I hope you find something useful & enjoy this video!
I am happy to receive your feedback, advice, suggestions to improve myself.
!!! I apologize for the mistake if I have made in this restoration !!!
**I still keep some parts, I want to save the world's environment**
--------------Thank you so much for Likes & Comments--------------

[@강인-i5d]

The Ingersoll Rand 114GQC Air Hammer kzbin.infoUgkxqqoaX03nrziKwF7Bjjcc71YzLEleMvOS was just the tool I needed. I Use it to remove stuck bolts. If held at the right angle you can cut slightly into the bolt. Then turn the air hammer to where it will hammer the stuck bolt to unspin the bolt. Given a little practice it works great. This air hammer gives you the control needed to get the job done right. Very powerful yet still does not seem to have as much vibration as other guns I have used. One of the best I have gotten my hands on.

[@pitaeata8493]

i don't know which is better; your video editing skills or your refurbishment skills. Thank you for the video.

[@gear_show]

You're welcome :D I am glad you watch my vide.

[@johnsradios484]

That was built like a tank. Great restoration job.

[@antondegroot6061]

Its too bad we live in a world where labor is heavily taxed while resources are not at all. This should be happening to every old tool, but paying someone to spend a day restoring an item like this costs about as much as buying a new one :(

[@TheEasylovin]

I feel like this is the guy that puts tools back together for AVE.

[@Coconut7403]

Lol

[@audunrundberg4028]

At first I thought this was an AVE video but then I realized it was already unboxed and used

[@michelechiavon546]

This guy is the healing bench

[@azelhaddouti1848]

Tot

[@klausfiedler879]

@@Coconut7403 9

[@shaunsoutdetecting1671]

As a tradesman myself and having used these tools it amazes me how many components are in these tools and the engineering involved in making them.

[@angelikafrede4631]

Kohletausch bosch flex

[@dfglub5891]

This is surprisingly satisfying to watch

[@gear_show]

I'm glad you like it.

[@BradyBegeman]

Love the care the thoroughness of your work.

[@gear_show]

Thank you!

[@СергейШаров-м2ц]

Довольно кропотливая проведена работа и достойна уважения. Одно дело разобрать, так после еще нужно все собрать.

[@maxwang2537]

I’ve now picked up an obsession with demolition hammers. Will get a used one day and do the same thing.

[@FernandoMartinez-wf4jd]

I work in a workshop I repair power tools Doing the same thing in my workshop and i really enjoy it It's amazing how We work the same way even in the end when you hold the drill's bit to check it out i used to do the same lol But i like your painting skills the most And your video recording and editing are amazing i wish I could record my work too Thanks for this amazing video from Iraq ♥️

[@gear_show]

KZbin brings us this conversion. I'm so glad while reading your comment. Anyway thank you so much!

[@russikforever8507]

Вы проделали большую работу! Спасибо за ваш опыт!

[@trabantfreak2370]

thats some great German engineering in that hammer. It is very beautifully put together.

[@michaeljurgens355]

It works for it is designed, also tomorrow. No cheap plastic toy...

[@davidbuchanan3374]

Awesome refurbishment, great video, very detailed and well produced. Thank you for sharing.. 👍🍀😁

[@patrickmulholland1840]

I TOOK ONE OF THESE APART A FEW WEEKS AGO IT TOOK ME THE WHOLE DAY TO GET IT BUILT UP AGAIN THERE MUST BE 20 PIECES 0R MORE IN THE FRONT ALONE LOVE YOUR WORK AS USUAL,THANKYOU FOR YOUR TIME AND EFFORT

[@sparx2391]

That's been well looked after. Nice job restoring it.

[@6lr6ak6]

Very good restoration of a very good Bosch rotary hammer drill.

[@gear_show]

Thank you very much!

[@stalkercvc9908]

U are doing refreshing because Bosch won't die 😎

[@aussierestorationsmods2715]

99% of people would throw it out, But you and only a small amount of people restore it, Looks great! Good job 👌😁

[@amrhawal8074]

Wss

[@MikeL-FL]

I’m actually shocked how well that went. The way the Germans over engineer everything, I expected it to be way more complex.

[@Dirtyharry70585]

sadly many of their tools are made in china and are not the same quality

[@SJMp3]

@@Dirtyharry70585 Not all is from China, Bosch factories stay also in Hungary or Taiwan. why is everything from china badly rated?

[@milanthemilan5015]

@@SJMp3 Probably lack of good quality check at end product.Also badly payed workers will make crap stuff.Bosch from Hungary is really good or really bad and Taiwan is better than China.I found Bosch tools on flea market made in Malesya and Germany,I cant tell are they original.

[@marcopinchetti5872]

@@Dirtyharry70585 why is the location of the factory important? as long as the procedures are the same, it could be produced anywhere with the exact same quality

[@13sergen]

The production of Demolution Hammers is still in Germany.

[@aserta]

Good rebuild. Those are good hammers, if you can and have use for it, keep this one. I have several units bought for my team and with the exception of one that snapped the piston's skirt in a freak accident, they've been in hard use for a while now. One of Bosch's better tools in their "newer" line up.

[@gear_show]

Yes I will keep it. I feel more easy to use with this tool while testing. Thank you for sharing!

[@mortalcombat8037]

I think this guy is a Bosch power tool technician that he can easily fix it back in a proper way.

[@BLINDADOBEATZzzOfficial]

This get better than original

[@TheYpavon79]

Hermano del Mundo, Realmente Fantástico!!!... Como siempre, Te Felicito!!!... Le devolviste la belleza a éste Martillo de Demolición!!!... Saludos desde Venezuela!!!

[@gear_show]

:D Muchas gracias!

[@gusser2121]

It's a very nice resto. I especially like your choice of hammerite paint for the finish

[@gear_show]

Thank you very much!

[@maxwang2537]

8:26 This is impressive. Using a grinder to cut the band without damaging the part underneath whatsoever.

[@ИгорьМатюхин-ф3л]

У меня такой бош тоже был только после разбора и ремонта работать стал лучьше и работает вот уже 6лет.хорошая машинка и не подводит никогда.профи!!!👍💪

[@MIGUELVINCENTY]

Muchas Gracias por compartir este video!!!! Me facilitó el rearmado.

[@alexsandromessiassantos396]

Gosto dos vídeos dele que é tudo perfeito tudo bem explicado parabéns meu amigo aprendo muito com você!!!

[@enriquezueco5462]

Increible la calidad de bosch, el taladro tiene pinta de tener muchos años y haber trabajado mucho y las escobillas estan perfectas

[@DragonBuilds]

Looks like powerful tool, but it is so heavy! Still, nice restoration. Nice to see a quality tool saved from the dump. It is probably better quality than the homeowner grade junk you find in hardware stores nowdays.

[@Gavreeli]

I have one of these and it is a real work horse. Breaks and drills concrete like nobody's business!

[@markdunford3181]

I’ve watched your videos from the start - all great, but this was one of your best! 👍

[@gear_show]

Thanks! 😃

[@joangordon-mowatt2229]

Very good job step by step you reall deliver and you are neat and clean thanks for the knowledge

[@manueljramorsolo2881]

This is a great restoration work. Great skills to perform this job.

[@TheUnlocking]

This is amazing work. I don't know how you remember where all the parts go. You're gifted, for sure. Thanks for sharing your incredible skills. I'm wondering, though; with all the time, effort, and resources employed in repairing the tool, wouldn't you be better off replacing it altogether?

[@patrickmorrissey2271]

Great job as always. I do enjoy how your previous restorations make special guest appearances in your later videos.... Well done Sir!

[@gear_show]

Thank you very much!

[@Yor1908]

Best one so far

[@gear_show]

Thank you!

[@MrQuijesuis]

made in german ... made in bmw humm good restoration . I really like your restoration. very good.

[@gear_show]

Thank you very much!

[@sereno224]

You are an artiste of this work, very good. Thank you!

[@mpalaskokkalis1476]

Τέλεια η επισκευή του κομπρεσέρ.

[@Litlek]

Danke dass du diesen armen und ungeliebten Boschammer zurück ins Leben geholt hast. Wieder mal ein sehr gutes Video. LG Dennis :-D Thank you for bringing this poor and unloved Boschammer back to life. Again a very good video. LG Dennis :-D

[@gear_show]

You're welcome, thank you!

[@oscaromarmontoya]

Las felicito todo muy bien explicado

[@yeagerxp]

Very good restoration 👍👍👍Thanks for sharing You should restore the case too

[@gear_show]

Thank you, Yes I will restore the case. Because of the video a bit long.

[@elielsanchez9062]

Good job friend, 👏👏👏

[@petervossos4816]

He probably was the genius that invented the thing!

[@braveheart8490]

I think it works netter than a new one!😎

[@kollerd31]

Great skills and camera work!

[@Abrahamayb]

that is very impressive bro, i use one of those on a daily basis

[@gear_show]

Nice 👍

[@danb8568]

Holy moly! Fantasic job on that one, nicely done 👍🏼

[@jeremylacson3881]

Sir san ang shop mo ganyan din hammer ko bosch brand

[@phiillzzz807]

i am 100% sure i could tear this appart and never be able to put it together ever again ahaha or actually put it back but realizing i left out 3 screws, 5 washers and a bearing out

[@jwa765]

Yep. When i do a project that's way less complicated than this, I take pictures at each step and lay every piece out in the order they came off, watch tutorial videos and still manage to have extra parts left over.

[@Tankliker]

@@jwa765 spare parts

[@dumpsterfire6351]

Hence the video

[@olympia019]

Definately voided some warranty there... great video!

[@joseluiscampirano5583]

Exelente trabajo felicidades

[@elmascholo13]

incredible job

[@claudecirlima2302]

very good channel

[@LL-vw4kq]

I dont know how yu do it.. Asome work man!.

[@JohnnyLee8355]

Are these types of content better than the ones with commentary?

[@tommitchell8257]

That looks better than mine and I still use it daily

[@Art416]

Wow awesome job .

[@tcr_tagger3738]

I still use mine on a weekly basis. Things built like a tank!

[@Tankliker]

Tbh then it probably breaks down a lot. Tanks a maintenance intense.

[@thomasfx3190]

Amazing to watch, thanks for the show!

[@christianwolf1017]

Кайф люблю такие видосы и перф тоже кайф

[@ПавелЛ-д5у]

Это отбойный молоток

[@lakhdariboualem1550]

bonsoir mr gear show merci pour la video felicitation c'est tres genial je vous encourage a bientot

[@gear_show]

Bonsoir Mr Lakhdari Boualem! Vous êtes les bienvenus, merci pour vos encouragements

[@nunesmotos351]

Seu trabalho muito organizado parabéns dou valor

[@selfrestoration9564]

Good work Done👌 Thumbs up 👍 👏 👏

[@gear_show]

Thank you so much

[@lucaluca4371]

Very Very Master Excellent

[@vijayantgovender2045]

Thank you for sharing your wonderful videos I am from South Africa

[@gear_show]

You're welcome, I'm glad that my video popup in South Africa.

[@gordbaker896]

Keep your Bearing Puller shaft well lubricated or you will strip the threads. Nicely Done.

[@lee2217]

Nice work We have the larger one of these at work they are excellent machines

[@tcan603]

)

[@shivashankear4014]

Super nice video thanks brother good,👏👏👏👏👏👌👌👍

[@DmitryKudryashov91]

Amazing work!!

[@дениселяков-ю6у]

работа много делать сложно хороший мальчик умница лайк

[@gear_show]

Thank you!

[@mingliao4312]

WELL DONE!

[@zakprof_____2776]

All respect good job thank you very much 💖✌️

[@gear_show]

You are so welcome

[@SachsVDE]

Big 👍 up ..,Bosch hammer is an amazing Tool..1️⃣

[@gear_show]

I love it! thank you!

[@muradinfinity3939]

Very beautiful, thank you. We learn from this👍👍👏👏

[@gear_show]

My pleasure 😊

[@JIM00738]

Excellent 😊

[@alouisschafer7212]

Finally somebody who knows that this model of hammer takes OIL not GREASE. When you fill these with grease they will work for a few hours only. For this hammer its 60ml of Bosch 1 615 430 019 or 1 615 437 512 Oil upon full disassembly to be precise. That oil is too expensive though so id say 10w40 engine oil is about right for the viscosity. Hammer geraboxes are not to be messed with they need the right lubricant they were designed for. Most Makita and Bosch hammers use a very liquid low viscosity grease for sealed gearboxes. Its NGLI 00 or 000 approximately. The smaller hammer drills use NGLI 0 for Makita and Bosch may use up to NGLI 1.

[@lightbatmen]

Себе такой же хотел приобрести на восстановление. Да, окислился капитально. Где-то на дачном участке под дождём лежал несколько лет.

[@gear_show]

I think at Japan warehouse, they place them outside.

[@сергейскрынников-у4щ]

я так понял это чистый перфоратор?только ударные способности?

[@jensvey2286]

Wau, respect for this video, very professional...

[@gear_show]

Thank you very much!

[@tatianagukalenko1729]

Complimenti sempre il massimo!!!!!!!!!

[@mohamedalli4832]

Good work buddy

[@gear_show]

Thanks for the visit

[@janinen22]

Hummer its self doesn't look too old it looks like left somewhere and forgotten or flooded by the way great job done 👍

[@mikesmith2551]

I bet he buys tools from the areas that were flooded or located right next to the ocean. I assume in Japan tools in this conditions are almost free or sold for 10 USD maximum. So great deal! Especially if you can repair it!

[@gear_show]

I guess so, I bought them from Japan recycle shop in my city. I hope that they not from Fukushima Daiichi nuclear disaster.

[@zakkaustin7213]

DANG THAT MUST TOOK ALL DAY

[@alikasem8058]

Great job 👍🏻👍🏻👍🏻

[@user-wr3np9se3k]

Great video Weldon

[@eliaseduardonieves574]

Excelente trabajo...lo mas

[@ajazahmad582]

Very nice work

[@riccardoruffato4662]

Same new drill 👏👏👏👍

[@chapstickevo]

awsome rebuild.

[@gear_show]

Thank you!

[@alaalolo1466]

صيانة رائعة مهندس

[@zeezee3422]

I thought he’d restore the instruction manual as well haha

[@yaserhussen3343]

س

[@rx-8ccx301]

I thought so too 🤣

[@ahitler5592]

Bosch upgraded in Japan

[@javierramos6749]

Excelente trabajo!!! Te felicito!!! Tengo el mismo martillo, vos me podrías orientar porque el mío funciona pero no percuta???

[@btd57]

This perforator seems to me to have been particularly well designed by the manufacturer. that in no way detracts from the quality of the restoration work which I find remarkable as with each video. Well done !!!

[@lorisorzan1450]

You have very nice shoes!

[@gear_show]

Thank you! 😊It is construction shoes.

[@vivekasandranathan3032]

Great job

[@НиколайИващенко-щ8в]

I’m actually shocked! like!

[@jrand2631]

Great restoration. 👍👍👍

[@gear_show]

Thank you! 😊😊😊

[@naxilali6256]

I love your videos.. from Maldives

[@chrismiller3484]

Incredible!

[@Rudy97]

Construction companies could save some money if they hired a guy to take care of the tools after use.

[@nepicness]

Martin I could see that, but when time is money and you’ll lose 10,000 by extending a project another day, buying a $200-700 drill seems like a steal.

[@Rudy97]

But someone could still sit down and clean the tools between projects. Where I work they throw around tools and never clean them, leave them out in the rain.

[@elfhelmp]

No wonder I see so many people selling them in flea markets in Eastern European countries. They buy them for scrap in Germany and the UK, dust them off and sell them as being good. I bought stuff myself, for example a 2000W DeWalt router that usually costs 500€ and it cost me 200 restored like new.