Bosch Serie 6 Reset

Bosch Serie 6 Test Mode / Reset / Fault finder

[@washingmachinetipsandhelp4350]

If you found the video helpful and would like to buy me a beer as a thanks,Links ⬇️ : 🙂REVOLUT: revolut.me/shirle4gny PAYPAL: paypal.me/washingmachinetips?locale.x=en_US

[@patrickoagu1479]

I was confused this morning but your video has helped me a lot this morning 💪👊👍👍👍

[@washingmachinetipsandhelp4350]

Excellent, I am really Happy it helped Sir 👌

[@tundekapp2833]

Oh you are a life saver, on a weekday evening when jobs and tasks are weighting me down, washing machine goes mental yet I need all uniforms washed for tomorrow...your instructions saved the day, thank you...phew

[@washingmachinetipsandhelp4350]

Excellent Tunde 👍 Glad to help.

[@lazyboy9883]

Thank you so much for this! No times were shown when i changed programs and any attempt to start failed. A quick reset as shown done the trick. Much appreciated!

[@washingmachinetipsandhelp4350]

Excellent! Glad it helped 👍

[@user-ElenaMuratova]

Thank you SO SO MUCH!!! Your video is SO helpful! It helps me with Bosch Serie 2! Nothing helps before it! I thank you so much and wish you a lot of health ❤

[@washingmachinetipsandhelp4350]

You are so welcome 🤗

[@malikshabazz7386]

Thanks brother this worked

[@washingmachinetipsandhelp4350]

Most welcome

[@RussellSmith-nv2je]

Thank you so much for making this content!

[@washingmachinetipsandhelp4350]

No problem 🙂👍

[@RussellSmith-nv2je]

@@washingmachinetipsandhelp4350 Do you know what would cause a Bosch Serie 6 to struggle to get to full spin? It seems like it constantly struggles to rebalance the load and extends the wash time. Running test cycle 02 in this video worked fine and it does reach full spin easily without load.

[@washingmachinetipsandhelp4350]

@@RussellSmith-nv2je on the test cycle does it run at full speed with clothes in ?

[@RussellSmith-nv2je]

@@washingmachinetipsandhelp4350 I didn't try with clothes - didn't realise that was an option. Should I run P02 test with some towels or something in? Also is there a list somewhere explaining what the different tests are?

[@RussellSmith-nv2je]

Also - I bought you a beer 🍺😎

[@pattreacy3118]

Klass! Critical aprase it’s dial two to drum clean! Not one just saying for those of us with tremor hands using own initiative and staying calm can b difficult! Got there in the end

[@washingmachinetipsandhelp4350]

Good man Pat 👍

[@tarakelly8366]

Hi, I have a washing machine very like this one and it just stopped working today but there's no error on it...just 3 symbols speed symbol, a leaf with e in the middle and a line above the aqua plus. Nothing changes when u turn the dial to the different washes. Would you have any idea of what I could try to get it back working or to identify the fault please? Many thanks!

[@tarakelly8366]

Also I've tried to do the reset and nothing is happening...none of the buttons are working.

[@washingmachinetipsandhelp4350]

Hey Tara, I wonder would the child lock be on by any chance- I’ll send you a link there.

[@washingmachinetipsandhelp4350]

Bosch Serie 6 Key Symbol 🔑 kzbin.infotkvvjsR84o8?feature=share

[@tarakelly8366]

I actually looked at that video yesterday and tried it but nothing is happening...I switched it off and retried a few times and plugged it out for a few hours and tried but just the same 3 lights coming on...its like the screen part is frozen or maybe broken? Thanks for your reply!

[@washingmachinetipsandhelp4350]

@@tarakelly8366 Shoot, Was hoping it may be the childlock. 🙁 - As they are a relatively new machine I wonder are you still under Warranty? It may be the PCB at fault but personally I wouldn’t be able to tell without actually seeing the Machine.

[@shabazkadir5537]

Hi I have the same washing machine as in your video. My problem is that when I start a wash it keeps increasing the time. It would start fo example 1hr 31min then later it would should say 45min when it should be around d 20min. Then when it gets to 18min and I check a few minutes later it has jumped again to 30min. So even a a quick wash lasts much more longer than the initial time given. It didn't do this before.

[@washingmachinetipsandhelp4350]

Hmm that is unusual. Is it pumping out and spinning as normal?

[@shabazkadir5537]

@@washingmachinetipsandhelp4350 yes all functions and settings working. It just seems to keep adding Time. So a wash seems to take nearly 2hrs when it's supposed to be around 1.3hrs.

[@washingmachinetipsandhelp4350]

I have found that sometimes if the load is too big the time can increase as the machine realises the clothes are not as dry as they should be after spinning so it will increase the time. Try a wash completely on empty and watch the time. See does the time increase on an empty Wash. If it doesn’t you know you have too much clothes in the wash, if it does it may be a faulty pcb. Worth trying the clothes option first though.

[@florencenyaga8436]

Hello. I hope you got the help you needed but in case you didn't, I can explain the time increase. See when your machines door is open and you select a program, the screen shows you the time and the weight recommended for that program. For example quick wash 30 only takes 3.5kgs in an 8kg machine. This means that it will take you 30mins to wash a 3.5kg load on that program. If you put clothes more than 3.5kgs the machine will detect that and increase the washing time. Always check the weight recommendation before loading your laundry or just use cotton like I do and fill the drum coz it takes a full load

[@farinagianpiera1545]

Buonasera anch'io ho lo stesso problema salta tipo da 15 minuti di nuovo a22 minuti per il risciacquo e non solo anche nel lavaggio di 30 minuti salta a circa 1h 30 mn.come posso fare grazie

[@KimWalsh-ui2xy]

Only video that worked, sent a beer thanks on Revolut!

[@washingmachinetipsandhelp4350]

Ah that’s great, Nice one Kim, and Thanks so much for the beer 🍺🙂👍

[@MS-eo5ni]

Hi.. i need your help. I have changed the pomp completely because the pomp was broken. I have placed a new one but now it does not drain the wash. What will it be? Everything of replacement is well done but i dont understand why the wash is not drain

[@washingmachinetipsandhelp4350]

@@MS-eo5ni did you plug the wire back into the new pump? Also if you did I would check for blockage in both ends of the sump hose

[@MS-eo5ni]

I did everything well and i have check it once

[@MS-eo5ni]

It gives on display the centrufying icon but not centryfing

[@washingmachinetipsandhelp4350]

Centryfing? I am sorry but that doesn’t makes sense to me man

[@maturebeautywithgloria]

Thank you for this, sorted out my error

[@washingmachinetipsandhelp4350]

No problem Gloria. Glad it helped

[@steves6577]

Hi, thanks for the video. I have the same machine. It's been playing up for some time where you select a program, the door clicks several times, drum moves slightly, then nothing! After several goes it would work, but now it won't do anything. I have tried putting into test mode, which it won't do either, but I am getting error code E61. Could you tell me what this code might be? I have suspected a fautly switch, but had an engineer out to look and he tried a new switch to no avail, he said it could be a faulty main control board but he didn't sound sure, he certainly didn't put in test mode! Any how it's been working for sometime with this issue until now, so could it really be a faulty control board? Any help appreciated.

[@washingmachinetipsandhelp4350]

Hey Steve. Sorry to hear you are in trouble with your machine. I have had the exact same thing happen a lady who lives relatively close to me. I tried another lock and it made no difference. Turned out to be the PCB. I wonder by chance if you are still under warranty by Bosch….. ?As a side note here is a bit of info I found regarding the error. The E61 error code indicates a door fault. It could be as simple as the door not being closed properly or as severe as a control board fault. Start by checking the latch and catch on the door followed by opening and closing the door to see if the machine restarts - Sorry I can not be of more help unfortunately

[@steves6577]

Thanks for the reply. After lots of door rattling I got the machine to start, so I have ordered a new door lock and hoping it's not the main board! Unfortunately it's long out of warranty. The engineer did try a new lock, but it was in an opened packet, so possible it was a faulty one? Anyway I will buy a new one and try.

[@miximuxse6501]

Hi! I have the same washing machine, but it wont drain. It is filled with water and gives e18 error. Do you have any solutions?

[@washingmachinetipsandhelp4350]

@@miximuxse6501 Hey There. Did you check the filter to see have you a blockage ?

[@miximuxse6501]

​@@washingmachinetipsandhelp4350The filter is stuck and I can not open it.

[@washingmachinetipsandhelp4350]

@@miximuxse6501 if you have a pliers, open it as much as you can and try gently move it around and pull at the same time. That should free it. The chances are something is stuck in there stopping the water pumping out

[@TimboNagasaki]

Hi. Our series 6 machine thinks there is >4kg already in the machine, and the bar (weight) display doesn't change when load is added. Any pointers on the load sensor, how to reset, or where it is and how to replace? Beer donation in process 😉

[@washingmachinetipsandhelp4350]

Hi, Apologies I never saw this. Did you manage to get it repaired ?

[@jfsmth]

Fricken legend worked a treat thank you very much

[@washingmachinetipsandhelp4350]

Nice one 😎👍

[@scottydogg278]

So I assume the motherboard/control unit (name?) on ours is bust but when we turn the dial to a program, temperature and times don’t pop up and buttons are non responsive. Can’t seem to do the reset/test you show as a result. Do we just need a new machine?

[@washingmachinetipsandhelp4350]

It could be that the front Panel is the problem. Are you still covered with warranty ?

[@scottydogg278]

@@washingmachinetipsandhelp4350 unfortunately not - already had to replace the motor on it and well and truly done with it - time for a new one

[@washingmachinetipsandhelp4350]

@@scottydogg278 oh man, No point pumping money after money into it so. I think you might be right to replace it. 👍

[@sonugvlogs3358]

Hello sir actually i have used bosch 6 series and my problem is my washing machine not taking water how can i fix that

[@washingmachinetipsandhelp4350]

Did you check the filter (bottom right)

[@Aftini]

Hi would it be possible to get the procedure for the model WTW85468|T/05 Serie 6 8kg Self Cleaning Condenser ? Thanks

[@washingmachinetipsandhelp4350]

Hi, unfortunately I don’t have the procedure for that Machine. Sorry

[@a_khris]

Hello, thank you for the video. What test number should I run to check heater / NTC?

[@washingmachinetipsandhelp4350]

Hi. It depends on the model of your machine

[@a_khris]

It's wat28461oe

[@washingmachinetipsandhelp4350]

@@a_khris hi there, Position 6

[@tanriant65]

Hello. Thanks for your video. I have a problem with my heating. When my washing machine finishes washing, I take off my clothes from washing machine very hot. This situation occurred after moving my house. What should I do. Do you have any idea. Thanks.

[@washingmachinetipsandhelp4350]

Hi Faruk. That’s a bit unusual. I wonder did the wire going to the thermostat perhaps pop out.

[@maxmax-or4dv]

Hello, I have the same washing machine and one big problem. When is engaged in any given washing program and needs to finish it won’t spin, actually it’s spinning slowly but won’t go to higher rpm. Have any solution? Cheers

[@washingmachinetipsandhelp4350]

Hey! When you press the Spin / Rpm Button does it show 1200,or 1400 Spin ? If you just try it on just a Spin cycle does it get up to full speed ?

[@MazookDK]

Did you find a solution? You never returned with an answer.

[@patrickoagu1479]

U are the best

[@washingmachinetipsandhelp4350]

👍😎

[@rajamannarreddyc2048]

I'm using Bosch washing machine 6 series, getting E78 error. Can I get solution for this?

[@washingmachinetipsandhelp4350]

What is the model number ?

[@jeanbaptistedezaux7816]

Hello, I do not get any error messages when I perform this operation on the machine. However, the water in the machine is cold, and during the "cotton" program, the machine starts and continues its cycle but gets stuck on one minute and keeps running non-stop until I turn it off. The clothes are neither rinsed nor spun, so I have to run a quick 30' program to rinse and spin. Do you have any idea?

[@washingmachinetipsandhelp4350]

It sounds like it possibly a heating element issue. If you do just a rinse programme does it finish the cycle ?

[@jeanbaptistedezaux7816]

@washingmachinetipsandhelp4350 yes it worked

[@washingmachinetipsandhelp4350]

@jeanbaptistedezaux7816 it does sound like it may be the heating element that is the issue and a rinse cycle is a cold wash only hence why the wash completed

[@danjuan19]

Was it the heating element? I have the same issue.

[@washingmachinetipsandhelp4350]

@danjuan19 The heating element heats the water 👍

[@keety1X]

Thank you🌻

[@washingmachinetipsandhelp4350]

@@keety1X you are very welcome 🌺

[@PaulHealy1987]

I have the same model and tried to reset based on your instructions but it doesn't go into test mode. Any ideas?

[@washingmachinetipsandhelp4350]

Hi Paul. Sometimes it takes 7 or 8 tries for it to work. I must have done 6 or 6 videos before it worked for me. All I can say is keep trying and hopefully it will eventually work for you.

[@othmanemansouri]

Hi ! Thank you for your video. When I run the test, an E28 error is displayed. What should I do please ?

[@othmanemansouri]

Also I have a tap sign flashing when I run any washing mode even though the tap is open.

[@washingmachinetipsandhelp4350]

@othmanemansouri Hi there, It may possible a blocked filter where the water enters or possible a faulty solenoid. Can you send on the model number of the Machine please

[@othmanemansouri]

Hi again ! Thank you very much for taking the time to respond. It is a Bosch Serie 6 WAT24419FF/54.

[@washingmachinetipsandhelp4350]

@@othmanemansouri No worries. My Manual is saying it is problem with the solenoid (flow switch) It is worth changing it and seeing does it solve the issue although it could also be an issue with the PCB should changing the solenoid not help

[@othmanemansouri]

Understood ! Thank you very much for your help. Have a nice day.

[@sudharani211]

Thank u so much 👍

[@washingmachinetipsandhelp4350]

You are very welcome 🤗

[@TheDanno1999]

Hi, any idea on how to reset a Series 6 Dryer? Thanks

[@washingmachinetipsandhelp4350]

Hi Dan, I don’t have a video up but here is a link to one 👇🏻 kzbin.info/www/bejne/eKPbqWekf5ilbMk

[@awimaan]

Tnxxxx mate ❤

[@washingmachinetipsandhelp4350]

You are very welcome 🙂

[@juniorionut9827]

Hello, I have a "strange" error with my Bosch series 6 Vario Perfect and that is: the machine does not start as it was designed. We have a toddler and he pressed a combination of buttons or rotated the dial (we assume) so that now we can start the machine by choosing the desired program BUT we have to press the "Water plus button" in order for it to start (and not the start/pause button). I need to mention also that the "Water plus button" can pause the washing cycle, the RPM button and Speed perfect do not work, the rest seem to be working. What is wrong? How can I fix this? Thanks!

[@washingmachinetipsandhelp4350]

Hi Junior. Did the reset help? Are you still under warranty I wonder ?

[@juniorionut9827]

Hello, I cannot reset, the combination does not work on my machine,.

[@washingmachinetipsandhelp4350]

As you probably know it is most likely a PCB issue. Are you still covered by Warranty… you might be

[@JulieSidhu]

I used the emergency procedure to unlock the door and now the door wint lock for the machine to start a cycle.I've done the reset as well, but the lock door symbol is still there.

[@washingmachinetipsandhelp4350]

The fact that you had to use the emergency procedure to open the door and now it’s not locking when you try a new cycle sounds like it may be the door lock itself is the issue. Please have this verified first by an engineer

[@aileendoherty4231]

How do you get fabric softener to go into machine

[@washingmachinetipsandhelp4350]

Is the softener still in the the soap drawer softener section after the wash has finished?

[@joose1676]

Hello, I have a Bosch series 6 i-dos, and in test mode the error e60 appears. what is that error? engine!!! , or ipm module thank you !!!! sorry my english is

[@washingmachinetipsandhelp4350]

Your English is very good! It is telling me it is an unbalanced load. If you run the Machine on the same program (empty -No clothes) does the same error appear ?

[@joose1676]

@@washingmachinetipsandhelp4350 I put it in spin mode only and the drum does not rotate, I investigated the power plate (ipm) a little and measured with a multimeter in the diode position between the positive pin and U there is a short, between positive and V a drop of 0.467 and between positive and W 0.467. so I think it's the IPM

[@JitendragiriGosai-z6t]

Sir My Bosch Washing Machine Timing Change in Mix Load Cycle 45 Minutes but when cycle start with 46 and ends after 1.5 Hours how to setup Please tell me about that.Thanks

[@washingmachinetipsandhelp4350]

Sometimes if the load is larger than the recommended it will add to the time of the wash

[@JitendragiriGosai-z6t]

Thanks 👍

[@جوادیوسفی-ط5ذ]

👏👏👏👏✌😊

[@fergy8559]

Thanks for the helpful video. I’m having issues when in dryer mode. About ten minutes into cycle The dryer doesn’t heat up unless you reset the Green thermostat button under the top section. Any ideas? Had an engineer look at it and he asked if an error code appears. No errors I just have to reset this button then it heats.

[@washingmachinetipsandhelp4350]

Hey Fergy. No worries man. Is it possible there is a built up of fluff somewhere in there and the thermostat keeps kicking in and going off as a safety mechanism. Can you take off all pipes/vents particularly the one going to the door seal from the large heater under the lid

[@mature_washerDay]

Nice 👍👍

[@karthickdilly1905]

Sir screen shows all together all the symbols and I can't start the machine it got struck k completely

[@washingmachinetipsandhelp4350]

Sometime it takes a few efforts at resetting for it to work

[@ummarwan5831]

now I have that luck on the screen what can I do please

[@washingmachinetipsandhelp4350]

Do you mean lock ?

[@mathiascuadrorodriguez7836]

Tengo un problema, cuando pongo a lavar, la temperatura se cambia sola de una a otra sin parar

[@washingmachinetipsandhelp4350]

Esto me parece un problema de PCB. Por muy loco que parezca, ¿puedes secar la placa frontal y la PCB principal con un secador de pelo durante aproximadamente 10 minutos cada uno? A veces la humedad puede causar este problema. Si esto no ayuda, le sugiero que consulte con el fabricante si todavía está en garantía. (Asegúrate de desconectar el aparato antes de intentar lo anterior)... Avísame si tienes suerte 👍

[@erdemaltparmak8739]

Merhabalar kolay gelsin bizim makine aynısından sizin gösterdiğinizin Biz makineyi çalıştırıyoruz 20 dakika sonra duruyor Ses falan çıkartmıyor başlat düğmesine tekrar basıyoruz fakat hiçbir hareket yok iptale getirip başka programa geçiyoruz o programda da bir müddet çalışıyor fakat sonra duruyor bazen durduktan yarım saat sonra kendi çalışıyor programı bitiriyor Lütfen yardımcı olabilir misiniz saygılar

[@washingmachinetipsandhelp4350]

What language is this ?

[@user-ElenaMuratova]

@@washingmachinetipsandhelp4350 Turkish :)

[@skndr5958]

When I press on start it beeps twice and doesn’t work…. Can you please help ?!

[@washingmachinetipsandhelp4350]

Does the door symbol go out when you press start at all?

[@skndr5958]

@@washingmachinetipsandhelp4350 GoD! Thanks for your reply Yes there is no door symbol Screen looks good, when I click on start it gives double beep and machine doesnt start

[@skndr5958]

Can you please help me to fix!

[@washingmachinetipsandhelp4350]

@skndr5958 No problem. There should be like a circular symbol with the door open and that symbol should disappear once a programme is started. Is this happening ?

[@skndr5958]

@@washingmachinetipsandhelp4350 there is no circular symbol seen

[@georgeabusinni1186]

Ihave aproblem with the sme serie6 beeping all the time and apperE20 and Ichange the elenent and steel beeping and appear E20 and did not start to work or reset it please help me

[@washingmachinetipsandhelp4350]

It could be a problem with the PCB- Did you try get onto Bosch ?

[@georgeabusinni1186]

@@washingmachinetipsandhelp4350 i amtechnical I asked them Iam shure without change the PCB

[@carolinenolan4540]

I can't get this to work at it 3 hrs Bosch i-dos serie 6

[@washingmachinetipsandhelp4350]

Sorry you are having no luck

[@vishalantil5325]

WAJ2846SIN/07 . Error code is E31 , -11. 4 beep sound. Unable to find the error code in Manual. Please help

[@washingmachinetipsandhelp4350]

Hi. I am not seeing any reference to this error in my manuals. If the reset above does not solve the issue, Try plug out the machine for 2 hours and try it again

[@iliyailiev7740]

hi, how to reset Bosch WDU28540EU, situation is urgent please

[@washingmachinetipsandhelp4350]

Sorry Man I don’t have a video for that particular Machine as of yet.

[@petru-cristianmale8646]

Have u sort this out,I'm in need it too

[@farhanakhter-id4bt]

Hello my bosch serie 6 machine has e35- 10 error

[@washingmachinetipsandhelp4350]

E35-10 indicates water has leaked in the base of appliance and not related to door switch fault. Please try this: Unplug the appliance and remove the drain pump filter. Then use some beach towels and tip the appliance 45 degrees backwards so excess water drains off completely. Also check and make sure drain hose is not clogged. This should solve the issue, please let me know how it goes.

[@demafklappers]

Can't see how to reset after errorcode.

[@washingmachinetipsandhelp4350]

Did you get it done?

[@leannelambert7072]

Hi we have a Bosch washing machine that isn't draining series 8, we have tried all the cleaning things that are suggested, it cleans but didn't drain we have error codes how can we reset our series 8 active oxygen..please

[@washingmachinetipsandhelp4350]

Hey Leanne. It is possible you have a blockage further up the Machine and not just behind the filter. Sometimes things can get stuck in the sump hose or even the drain hose. Resetting the pcb really wouldn’t help on this occasion. I am wondering is there a possibility you are still in Warranty 🤔

[@leannelambert7072]

@@washingmachinetipsandhelp4350 thank you we had same thought sadly not we have decided to buy a new machine....thankyou for the quick reply xx

[@washingmachinetipsandhelp4350]

@@leannelambert7072 no worries Leanne, Best of Luck with the New Machine. Hope you have a fab Christmas 🎄

[@rastaqueen30]

E31 error code. Help please

[@washingmachinetipsandhelp4350]

Hi, Apologies for only getting back to you. Is it a Bosch Washing Machine you have with that error ?

[@rastaqueen30]

@@washingmachinetipsandhelp4350 yes

[@marcinmiodonski8507]

Hello friend need Youre help Bosh Serie 6 VarioPerfect WAT2466EPL/67 E00 -00 CAN you please tell me what it is ?

[@washingmachinetipsandhelp4350]

Hi, I’m not seeing anything in my Manual for that 😔