That type of lock was often found as factory installed on Bikes made in Sweden. The lock was welded directly to the bike frame and did not have the bracket as this stand alone lock has.
@jonasaman91044 жыл бұрын
Never seen one not welded to the frame before!
@Cheesen774 жыл бұрын
Have had one sheppshult and one crescent with a assa lock welded to the frame😂
@RawBejkon4 жыл бұрын
Gave me flashbacks when the lock froze, the plastic cap was not watertight! And being ASSA you know you couldn't force it open... Weird seeing me standing on my knees breathing into the lock to warming it up! :D
@jamesstrain70624 жыл бұрын
simon widell next time this happens, heat up your key with a lighter then leave it in there. A lot more efficient and you don’t add any more moisture from your breath.
@HasturT4 жыл бұрын
It was on almost every bike when I was a kid.
@-Turtl3_4 жыл бұрын
It's kind of funny and sad at the same time how this bike lock from the 1980's is more secure than most of the modern bicycle locks available nowadays :D
@ashscott60684 жыл бұрын
Well, hardly anyone steals bikes anymore. Businesses where people commute by bike, often have secured areas to park them. And bikes themselves have divided much further into bikes that are so cheap they're not worth stealing, and bikes that are so expensive that you know you can't just lock them to some railings on a quiet street.
@-Turtl3_4 жыл бұрын
@@ashscott6068 Well, I don't agree that there are just these two categories. There's also a lot in between. For example bikes that cost somewhere between $300-1000. If you secure them with one or two high quality U-locks or chain locks, in a public area, they can be "stored" on the streets as well. Furthermore it depends on where you live, in highly populated areas the risk of bike theft is a lot greater than in small cities / rural areas.
@hihu72004 жыл бұрын
80s technology was good solid technology for its day. It laid the foundation for many of the technologies we take for granted in the year 2020. That said, as an 80s child I love playing with the fruits of technology that was started in the 80s and before that. It is cool stuff.
@kareno86344 жыл бұрын
No matter what the cost of Bike, if there are thieves around - That's what they do. Besides, now they tend to work in groups or gangs. Sad. No Trust, just Be prepared.
@Codebreaker49814 жыл бұрын
@@ashscott6068 I work on an enforcement team at a university, at its peak we had an average of four bikes a day stolen. International students have plenty of cash to buy decent spec bikes, but buy cheap locks to secure them. Bike theft is big business in the UK. We now use a company called Bike Register to try and combat the problem.
@AnWe793 жыл бұрын
Happy retirement Bill! Your channel was my "gateway drug" into security and lockpicking KZbin, hats off for the knowledge you put out there. I'd bet anyone who lived in Sweden in the eighties or nineties would recognize that style of lock instantly, they were on lots of bikes back then. The ASSA door locks were (are?) also extremely popular. You might already know, but the "MCB" on the key stands for Monark Crescent-Bolagen ("bolagen" means companies in Swedish), so it's off a Monark or Crescent, the dominating bicycle brands in Sweden in the eighties. (They also made a lot of other stuff, motorbikes, mopeds etc.)
@Westhelockpicker4 жыл бұрын
No disrespect bill but it's nice to see a lock that even you can't open sometimes it kinda gives the rest of us hope lol
@haydenyork84144 жыл бұрын
Watch the naughty bucket videos haha
@Westhelockpicker4 жыл бұрын
@@haydenyork8414 I have. The ones where Harry takes a bunch then opens them on his
@haydenyork84144 жыл бұрын
@@Westhelockpicker I wonder if Harry has his own version of the naughty bucket lol
@BD90..4 жыл бұрын
@@haydenyork8414 Probably...I would like to know how many minutes he practices before he gets the hang of a lock.
@iWhacko4 жыл бұрын
1980's Assa be like: "oh come on please... of course we thought about the weakest point, so we made sure you can't remove is without the key"
@swe_nurse81214 жыл бұрын
And even if you pick it you need to secure it in the holder (or more likely with duct tape if you pick it), if you forget that and turn you run the risk of it folding into the spokes of the back wheel.
@mattiasthorslund64674 жыл бұрын
@@swe_nurse8121 Later versions had a spring that kept it open and away from the spokes.
@FireWaia4 жыл бұрын
As a Swede, this is the most patriotic pride I have felt in a long time
@beeble20034 жыл бұрын
Why are you proud of a bike lock that allows somebody to pick up the bike and take it to somewhere private where they can use power tools?
@FireWaia4 жыл бұрын
@@beeble2003 Where you thrown into a wall as a kid or something?
@-42-473 жыл бұрын
Same here!
@roysammons24454 жыл бұрын
Master Class video Bill, absolutely brilliant. I love the way you audibly voice what's going on inside your head. Looks like Assa put the pin there just to tease the bike thief.
@ehsnils4 жыл бұрын
Back in the 70's that style of locks were mandated by insurance companies in order to pay out if your bike was stolen, so almost every bicycle of that era had those or similar style locks.
@frankbiz4 жыл бұрын
What I love about Bill is you see what you get and does it without trying it behind the scenes a dozen times before so he can make a short video like some others.👍🏻
@plug4uk6964 жыл бұрын
I was thinking all along that that was the weak spot with that roll pin, but the Swedish boffins proved not all you see is right, nice job to the Swedish boffins for the devious workmanship and thanks Bosnianbill for sharing this lock with us ;-)
@penfold78004 жыл бұрын
Yep it fooled me too. The first thing I noticed. So the swedes were delaying thieves with misdirection and false hope. Genius!!!
@plug4uk6964 жыл бұрын
@@penfold7800 : They are very clever people ;-)
@rasmuslundin1994 жыл бұрын
Back in the 80's this type of lock was mounted on every singel bike you could find, here in Sweden.
@BuzzinsPetRock784 жыл бұрын
We used the circular ones here (also from assa), and they were pretty universal to all bikes in the country (NL). But they weren't all safe, as at some point a flaw was found with the keys....that allowed you to use a blank key to open them... This was rectified of course, but there are still bikes out there with the old locks :)
@pepperpepperpepper4 жыл бұрын
Send one to Bill?
@aapje4 жыл бұрын
This is how they typically look: cdn.webshopapp.com/shops/14766/files/216602630/axa-2e-fietsslot-aanbieding-axa-cherto-compact-95.jpg
@aapje4 жыл бұрын
A downside is that you can lift the rear wheel and slowly walk off with the bike. Then you can open it away from prying eyes. My school told me that they once had a truck pull up and people just started loading bikes from the school bike shed into the truck.
@johndododoe14114 жыл бұрын
@@aapje Truck attack is a common problem these days with criminals from eastern Europe claiming they just found these bikes as "generous gifts" from the local population.
@johndododoe14114 жыл бұрын
Circular style is still made by ABUS.
@StefanAxelsson4 жыл бұрын
Grew up with these locks. I'm sure not all bikes had them, but all bikes I owned growing up had this or a circular type (if my memory serves me it must have been a stamped steel solution, almost like the discus locks). But what this made me realize is that I see so many bike locks (for pushbikes, motorcycles etc.) that are sold today, and the pick resistance seems to have...well... Let's be nice and say "not improved".
@KJohansson4 жыл бұрын
I guess you mean the Basta/AXA Circular locks, they are still for sale, under AXA name or at Biltema.
@davidkraft1583 жыл бұрын
As a swedish locksmith, this makes me proud Assa.
@wot_hog4 жыл бұрын
What a cool lock! Swedish ingenuity.
@NirreFirre4 жыл бұрын
WoT Hog Or, perhaps more a proud engineering tradition 🤓 Asea, Assa Abloy, Alfa Laval, Atlas Copco, Electrolux, Ericsson, Husqvarna, Saab, Sandvik, Scania, SKF, Volvo, and so on
@michaelkarnerfors95454 жыл бұрын
Hah! This video hits on _two_ locks I grew up with! The bike lock model came fix-mounted on my first three (adult) bikes (Monark and Crescent), and the door lock is what we have on my parent's summer-house. Oh my word, the nostalgia feelings. That bike lock, that is where I learned about key serials. I accidentally _broke_ the key one day while the bike was locked, and I called up a locksmith to see if they could repair the key. "...yes, it is an ASSA bike key." "Oh! Well don't bother with trying to fix the key then. It is an original, and you have the serial on it?" "Yes?" "Okay, tell me that serial, and you can come by tomorrow and pick up a freshly cut key" "What?" "Yes, I just check out the pattern and cut from that" Unfortunately, the bike was stolen by the time I got back to it, but at least I learned about key serials. :)
@vemvajag4 жыл бұрын
I would never think that a random video of a guy picking a lock would bring me back to my childhood
@JuhaJutila4 жыл бұрын
That lock came prefitted on my childhood Cresent bike at the early 90's. It was easy lock to unfroze because of that long key. You just grap the key in your hand and warm it up and then stuck it into lock.
@TheSadButMadLad4 жыл бұрын
I saw the thumbnail on my subscription list, saw the length of the video and thought "this will be a challenge" it'll be a good lock.
@johnmorgan16294 жыл бұрын
First time seeing one those locks, looks impressive for its age, a modern version would probably sell well. Where I was in Europe in the 80's I don't recall ever having to lock a bike up.
@beeble20034 жыл бұрын
But this lock doesn't give any real security: you can just pick up the bike, throw it in a van and attack the lock with power tools somewhere private.
@demopem4 жыл бұрын
Oh, i remember those. Had a bike with that, except it was welded to the frame from the factory.
@theRealRindberg4 жыл бұрын
Same, mine was also welded to the frame at the factory
@ImGumbyDangit4 жыл бұрын
Hey Bill, it's nice to see you working on an "easier" lock today. I actually like seeing your thought process on attacking a new lock. Thx for your Video.
@gustavb36734 жыл бұрын
It's been a while since a saw these locks but back in the day it was very common. It's an easy pick, i picked a lot of them and changed the locking bolt to a new one. You made me smile by thinking you could easily bend it open or only remove the pin or to use light turning tension when picking the lock. Not all ASSA are scary like the old ASSA 500-series that was pretty easy to pick with the "timeglass"over tumblers, those was as fast to pick as to open with a key.
@gustavb36734 жыл бұрын
That old ASSA 9-lever 90000 lock is also pick-able but i like to snap with the turner when i pick them if you understand what i mean, long time since ASSA stopped selling that one.
@freakygardener8033 Жыл бұрын
I love that bike lock! We should reproduce that, and bring it back to production! Just need to add some sort of anchor, to secure it to a tree, or bike rack,or something.
@RuneInternational4 жыл бұрын
The pin is only to replace a cylinder insert with missing key or other failure, without needing a blacksmith to weld on a whole new unit
@karsh0014 жыл бұрын
Hey! thats my old bicycle lock! They were usually welded to the frame. Really practical.
@gtfouraw4 жыл бұрын
Ahh so proud of being a swede 👍🏻
@theRealRindberg4 жыл бұрын
I think you've started a counter on how many swedes that have watched this video ;)
@Chaomhainn4 жыл бұрын
This lock would suit the newer bikes made of carbon fibers . Those are expensive bikes ! Nice job sir ! Worth the time to view you approach and technique .
@petaks014 жыл бұрын
A lot of Swedish built bikes during this time had the locks welded to the frame at the factory.
@Murgoh4 жыл бұрын
Same thing in Finland, I went to school in the 80:s on a Finnish-made Nopsa with a welded-on lock. Nowadays they don't make bicycles or much anything in Finland, everything is imported from China.
@noobFPV4 жыл бұрын
@@Murgoh Truth be told that lock is worth more than the chinese bike.
@bogganalseryd23244 жыл бұрын
Yeah my old 80s bike had one of these Locks. Assa makes phat locks. Atleast Sweden have one product worthy of export lol. We're finally moving towards darker nights here in northern Sweden, up til now it's been light 24/7, you feel constant jetlag.
@NothingPicksLocks4 жыл бұрын
I have an ASSA bike lock same frame mounted wheel lock but looks a bit newer and it looks like a wafer lock but Im pretty sure it is a reverse sidebar because you tension in and nothing binds ever
@ccadama4 жыл бұрын
@Bosnianbill. Thanks Bill for your persistence with the rake. You know if one plays the part right, if one is picking the lock open and you make up some story about losing your bike key and you're really late for your date or appointment I'm sure a bunch of we'll meaning people will come up and offer helpful tips. Hope you and your family stay safe and well. Have a Happy Independence Day.
@SayHelloToWilko4 жыл бұрын
This is awesome. Brand new bike locks costing >$100 can be opened in seconds, but an old lock from Sweden keeps Bisnianbill busy for minutes.
@pettson9994 жыл бұрын
This lock was very common on Swedish manufactured bikes from the '70s and '80s, not only as an add-on, but most commonly welded directly to the frame. MCB holds the in Sweden commonly well known bicycle brands Crescent and Monark.
@peterh.15214 жыл бұрын
I still remember this lock, it was installed in Swedish quality bikes like Monark and Crescent. I have owned this type of bicycle and of course used this type of lock to secure the bicycles.
@hihu72004 жыл бұрын
ASSA makes solid locks. I bet they could update this lock and sell it not only in Europe, but here in America as well. I imagine that it would sell well.
@mal13able4 жыл бұрын
love the determination,great video as always,Mal in BC, cheers Bill
@kristofferhellstrom4 жыл бұрын
KZbin truly has everything :D Great vid, keep it up!
@larsvargstrand67494 жыл бұрын
My Crescent bicycle from the 80s have this lock! I previously also added a big "titanium-steel" MC lock (from the 80s) that costed a lot (over $100, ca 1983). After a while, I thought it might be overkill for this bicycle, made it even more heavy!
@AThreeDogNight4 жыл бұрын
80's?? That's the best lock I've seen to date for bikes, love to see what's made for cycles from them as well.
@beeble20034 жыл бұрын
It's a terrible lock. A thief can just pick up the bike, take it away to some private place and cut the lock off there.
@jimboswe4 жыл бұрын
I had to check and yes, the key for my apartment door, my garage key and the spare key to my parents apartment are also Assa keys. Feels like Assa is the default brand for locks in Sweden. I'm so used to always see the Assa logo on all keys...
@DonzLockz4 жыл бұрын
Great looking lock and design. Good that it gave you a fight for an old wafer lock.😉✌
@3DMegadoodoo4 жыл бұрын
I've never seen this type of lock that wasn't actually welded to the frame. I guess this was meant to retrofit in older or cheaper bikes that didn't come with one.
The welding to the bike frame came later, this style came first.
@penfold78004 жыл бұрын
...or give you the choice of what lock you wanted to use without having to lug one round that you weren't using.
@gustavb36734 жыл бұрын
They where mostly welded from the factory but this is the aftermarket variant for retrofittig
@theRealRindberg4 жыл бұрын
@@ehsnils I don't believe your statement. I can't remember seeing the unwelded design before the welded design.
@crabapple19744 жыл бұрын
Remember this lock! Was on a lot of bikes in my childhood.
@crabapple19744 жыл бұрын
Think it was usually welded to the frame on Crescent and Monark bikes?
@mrfrenzy.4 жыл бұрын
You need to make a symmetrical tensioner for the ASSA 90000. The first couple of levers always should lift to the same height as the actuator. This makes picking much easier as you only have to pick the center levers.
@bosnianbill4 жыл бұрын
So you're saying the first two levers and the last two levers are all cut to the same height? It that true for ALL Assa 9000s? If so, it'll still be tough since there appear to be false gates, but with 4 fewer levers to worry about it improves the odds significantly.
@mrfrenzy.4 жыл бұрын
@@bosnianbill Exactly. Because the actuator is as wide as two levers and the key must work from both sides the levers opposite the actuator are always the same height as that one. When you feel tension on the actuator the levers opposite it will already be at the correct height.
@mrfrenzy.4 жыл бұрын
@@bosnianbill This is a tool Swedish police confiscated from thieves: imgs.aftonbladet-cdn.se/v2/images/4bc702a3-17bd-47b4-9c83-17c5e72655e7?fit=crop&h=716&q=50&w=1000&s=9b3b81800901f6c63e199026921ef1a237abf7ce
@bosnianbill4 жыл бұрын
@@mrfrenzy. Excellent! I can make one (kind of) like that one in the shop. A PROJECT! Thank you!
@RWBHere4 жыл бұрын
@@bosnianbill It's like the tool you used which was designed by Lock Noob. Some of them have that arrangement on one end.
@nostalgimacken4 жыл бұрын
Assa made houselock for doors and bikes like Crescent- Monark (MCB ) truly perfect lockdesign
@Zo004 жыл бұрын
Aah, the childhood memories. Pretty much every Swedish manufactured bike had one of these over a couple of decades.
@Murgoh4 жыл бұрын
You wouldn't be able to bend it outwards even if you detached it from the frame, the hook at the end of the locking bar goes into a recess in the steel casting and prevents it. Similar locks, often welded directly to the frame without the bow, were very common here in Finland at least in the 80:s
@spikeydapikey14834 жыл бұрын
That is a nice bit of kit
@RawBejkon4 жыл бұрын
My old bike had that exact lock! Love from Sweden
@KristoferOlsson4 жыл бұрын
I had a lock like that on my bike back in the late 80s. :D
@EverydayNation3 жыл бұрын
That is a pretty cool design
@MrTorbenAnd4 жыл бұрын
Best lock I have had yet!
@MG-cp8xk4 жыл бұрын
Looks like deep locks are one good thing to look out for when purchasing a lock.
@jackdaniels79134 жыл бұрын
They don't make them like they used to that's for sure! 🥃cheers🍻
@Sgt4skin4 жыл бұрын
MCB on the key stands for Monark Cresent Bolagen and is the most common bicykle manufacturer in Sweden.
@lmars59334 жыл бұрын
Great video my friend thank you for sharing such a interesting lock 😎
@MrJools704 жыл бұрын
Beast of a lock
@williamemerson17994 жыл бұрын
You may (probably) already know this but roll pin punches can make life a little easier. You can modify your existing punches by chucking them up in a drill and reducing the end diameter to fit inside the pin using a Dremel tool with a cut off wheel.
@bosnianbill4 жыл бұрын
Thanks for the tip, William! I actually DO have a set of roll pin punches but they were too small in diameter for this pin, so I grabbed a normal punch with a larger diameter.
@nathnathn4 жыл бұрын
Just the extra distance to the lock seems to be a simple way to really frustrate any wouldbe lockpickers. And ultimately frustrating them or making them need to get new tools is one of the best defences you can do.
@danareed16564 жыл бұрын
great video you always make me smile
@thelockpickinglebowski6334 жыл бұрын
Cool lock! Surprisingly formidable (or perhaps not so surprising). I mean, it's an ASSA.
@flipflop82ful4 жыл бұрын
I had one of these welded to my bike frame as a kid
@ponderinggeek78614 жыл бұрын
Ah ha - back to normal schedule :)
@nicklasodh4 жыл бұрын
You could have the bike key in your keyring, because you took out the key when it was unlocked to.
@martinlyhagen61664 жыл бұрын
The classic "Blocklås". Usually it was welded to the frame, not clamped like the one you got. images.auctionet.com/thumbs/hd_item_25886_c495b487e4.JPG
@viralt10724 жыл бұрын
Hade it on my Bike to this day. And the 9000 in the door Along with a twin combi neptun lock. Daloc Security door. Yet as a Swedish locksnith I get in under 1-2 min
@henrikl13944 жыл бұрын
Some of these lock where standard welded to the frame of the bike.
@LoppanH4 жыл бұрын
I opened one of those back in the days took a screwdriver and trashed the inside took me a rather long time.
@VargasKoch4 жыл бұрын
I wish these still were standard issue on swedish bikes instead of some flimsy o-lock.
@SofiaisSunshine4 жыл бұрын
Bill’s first tool of choice is always a rake...
@twjohnson12034 жыл бұрын
Well I don't have to duct tape my bike to a pole anymore. I see how that lock got its name...I'm sure it's been called an assa and much more-a!
@theRealRindberg4 жыл бұрын
I remember that lock type from ca 35 years ago :)
@MrLangDog4 жыл бұрын
I'm having a little trouble envisioning how these were welded to bikes and used.. Anyone got a link?:)
@fredriksvanstrom45924 жыл бұрын
Have a look at this one... A couple of pictures from an auction site. auctionet.com/sv/434247-cykel-cresent-varldsmastarcykeln-307-fashion-line/images#image_2
@RAkers-tu1ey4 жыл бұрын
@@fredriksvanstrom4592 Thanks for this. That lock would never work here in LA. They just grab the bikes and run away with them if they aren't locked to something solid.
@thalivenom49724 жыл бұрын
@@RAkers-tu1ey you could make it slightly wider, so you could rin a chain through the link too, and around a pole. wheel locked, and bike locked.
@penfold78004 жыл бұрын
@@thalivenom4972 or you could lock the frame and front wheel to a pole with a second lock and chain
@penfold78004 жыл бұрын
I think probably imagine this lock without the U bar, where the two brackets of the lock are welded to either side of the frame instead of to the U bar as they are here.
@ambsquared4 жыл бұрын
When I was in college, if you had just a lock on the back wheel, your front wheel would get stolen.
@beeble20034 жыл бұрын
The worst is those bike racks that encourage people to just lock the front wheel to the stand. People don't seem to understand that bicycle wheels can be removed in seconds. If somebody has locked just their front wheel, it's trivial for a thief to take their whole bike except that wheel, and steal a compatible unsecured front wheel from a nearby bike.
@michaelkartman35434 жыл бұрын
She put up a real fight! I was just wandering if you could possibly do a video on budget friendly table top vises. I can’t find a reliable vise unless I spend upwards of $60-$80. Thank you for your consideration!
@gutsngorrrr4 жыл бұрын
So a 1980s lock that puts to shame many of the modern locks today, due to some very clever but simple thinking.
@johnh86154 жыл бұрын
Mind blow. Have you seen on The last Viking. Gallium vrs titalium ABBUS lock. ...... BOOM!
@fu1r44 жыл бұрын
Those bicycle locks are very easy to open. I have done that a couple of time. A hammer and a screwdriver.
@kaleb93884 жыл бұрын
Looks like one big pain in the ASSA!
@ianrobertson83134 жыл бұрын
Great lock
@robomoto55504 жыл бұрын
Would the core puller u tested work on it i wonder.
@uncle_thulhu4 жыл бұрын
Why not use one of those weird double-sided auto lock rake?
@PatrikStarFunk4 жыл бұрын
Tough cookie. Had one one my REX bike😁
@DoktorFreon4 жыл бұрын
Often when you bought a bike from a Swedish manufacturer in the early eighties the lock was actually welded on to the frame before painting.
@bradw05354 жыл бұрын
Really appreciate your willingness to "ruin a video" by making an attempt that may end up in a fail. Makes the video better if you ask me! Also noticed a theme here... you can count on a fail if you don't have a long enough tool! ... referring to the pick, tensioner, and punch of course 😁
@curthatt64614 жыл бұрын
Awesome lock! Now do the lever one without destroying it.
@liebefriedenworldwide87804 жыл бұрын
Don't worry about any people, I saw a dude with a hammer "working" on a bike lock in the middle of the city [Amsterdam], people running left and right, just a normal shiny summer day, nobody cared. This changed my mind forever.
@wiskeeamazingdancer49644 жыл бұрын
These were basically on all bikes in Sweden in the 80s and 90s. Standard on any new bike from proper brand.
@coladict4 жыл бұрын
So windshield wiper insert is a real thing you have for sale over in the US? That's really weird. We just have ready-made windshield wipers of different lengths to buy.
@Ooodog694 жыл бұрын
Not for sale, just visit your local car mechanic workshop. They will throw out hundreds of those every month. They are used to give cheap wiper blades some stiffness so they don’t flop about in the windshield wiper heads. Usually pre 2000 built vehicles
@penfold78004 жыл бұрын
Sparrows, Southord, Petersen, Multipick and many other professional locksmith tool suppliers now include pre-graded and prepared wiper insert wrenches in thier kits (which are usually hardened stainless steel) Some even supply unworked but pre-cut lengths of spring steel for you to make your own. It's a pity they don't supply blank pick steel lengths too. Ah well.
@Thingsthatgopew224 жыл бұрын
I had at least two bikes with this kind of lock and where I lost the key. Powertools werent all that common in the 80's so it was an absolute ass to remove with a hacksaw. That shackle is hard as F, at least for an adolecent. And you have to cut both ends of the shackle.
@davlok51594 жыл бұрын
Almost made an Assa out of you! :-) But to the victor goes the spoils!
@kareno86344 жыл бұрын
i have to admit - i Just couldn't figure out a way to use that word 'as such'. You Both did an Assa Kicking Job!
@RWBHere4 жыл бұрын
But he was Abloy to rake it open...
@niklaselste16044 жыл бұрын
Hi no false gates in the "tillhållarlås" just one big gate for eatch The bike lock we have brannew at work
@KJohansson4 жыл бұрын
As a Swede I can confirm it all, those are solid. I do remember method utilizing a long drill, and a flat screwdriver to turn it open. www.raketsport.com/crescent_test_inomramen1960.jpg
@sssxxxttt4 жыл бұрын
I lost my key and used the drill method. One should keep in mind that a cordless drill wasn't at anybody's disposal in that time
@Stefan-4 жыл бұрын
@@sssxxxttt An certainly not battery powered grinders either....
@vagnhenning4 жыл бұрын
So what you do is you drive down the street in a van, and if you spot a bike you fancy, you pick it up and throw it in the back and take care of the lock back in the shop.
@kerberos6234 жыл бұрын
Vagn Henning Ebbesen which is why most of us had wireloops to thread trough bikeracks or round poles which you the locked onto this look lever
@billcarson19664 жыл бұрын
"Part of Swedish law" LMAO! 😂
@johndododoe14114 жыл бұрын
Insurance company approval, what UL was supposed to be.