(1809) Baton Clone of American Padlock (JUNK!!)

[@THR33STEP]

Don’t forget a couple anti-bypass discs! It won’t be junk after the improvements!

[@joezuccardo3245]

Hello Bill, Locks with that warning about braking and entering are used on storage facility units as lockout locks when people don't pay rent for storage

[@davidcovington901]

4:04 "I very likely could have bypassed this but if it's all standard pins why bother?" Pro Talk

[@PjD-pk1fg]

I miss you Bill. Hope you're well and healthy.

[@skygh]

Thank you for your service Bill.

[@junkman8742]

"DO NOT DUPLICATE" ...puts the bidding code 23433 above

[@robertgarymyers6737]

yes, I noticed that it has the bitting code on key, that will need to be ground off or duplicate key.

[@mstriker3656]

Isn't that colour Baton Rouge there Bill ?!?!😁 Still coming back for your videos, thank you from the UK!

[@technoking6429]

Does anyone know when the sparrows disc detainer pick that Bosnianbill made will be in stock?

[@brianfield58]

I heard mid November and they are going to have different tips.

[@technoking6429]

@@brianfield58 ok thank you!

[@williammorton8555]

I've had dates like this...wonderful body, boring core.

[@stevegoodson9022]

And like your average lock buyer, sometimes a wonderful body is enough to satisfy, but under stress it'll fail you.

[@stevegoodson9022]

Lot of slop in here, just floppin' around

[@adamsmith6594]

I thought Snape killed you?

[@AC9DJ]

I think I might have married one of your former dates...

[@idkidk4334]

Sounds like master lock™ 'the world's training lock'

[@danareed1656]

iv got one of those , i have not tried it yet! know iv got to go find it and try it!

[@jgaffney567]

Pink used to be the color used to signify male while blue female.

[@MrBigShotFancyPants]

Still is to so many but their photos are all in black & white only..😏

[@bf0189]

Hope you can review LPLs new picks sometime!

[@rj8665]

Aside from the colour or should I say color, it looked like a nice lock to me. It is a lot better now that it has been repinned. I am still using a master 140 and master no3 to practice with.

[@WizardofGOP]

Wondering if you could start with a rake attack first to really measure how bad it is and then you could pick it if you like, or vice versa. Does your camera have a touch screen display that would allow you to select the area that it should focus on? It keeps refocusing on the wrong spot, as you are aware and makes it a little bit difficult on the eyes to watch. Wondering if there is a feature of the camera that will help reduce that.

[@keeganmurray2001]

Happy retirement bill

[@patrickbowers8359]

I like that lock 🔐 just repin it

[@JohnnyDee62]

Judging by the (typical) quality control on the lock body, the core is no surprise. 😵🙄 Wishing I could get a chance at BB's re-pinned version, though! 😁😎😍

[@bradw0535]

Just a few security pins (and yes, the anti-bypass wafer) would have made it a decent lock. Couldn't even copy a lock right! Thanks Bill

[@gozzendk]

Thanks for the video 🔑👍

[@hillbillylocksport5547]

I bought a pile of these from eBay... Gonna make challenge locks

[@EternalTina]

Reminds me of a colleague of mine some thirty years ago. He had put some Dymo labels on his car windows: "Warning! Braking into this car may cause mutilation or death!"

[@MrPir84free]

Back in 1984, we painted a Gamo Goat with it's given nickname "Deathwish" on the front .. We had complained many times to maintenance about the brakes on it ( 6 wheel drive truck ). About after 8 months, they finally looked into it. It had one working brake out of the 6. We were driving this constantly in a foreign country, in very mountainous areas.

[@warddc]

the pin stack looks really short. Could they be just overlifted?

[@johndododoe1411]

Yep, just like LPL demonstrated in today's video on actual American (Master) puck locks.

[@NothingPicksLocks]

Morning Bill, Happy Friday!

[@andyredvolvo9434]

Looks like a city rake would open that

[@liquidbass84]

The only reason they put that warning is because they know that the innards are garbage.

[@1jviezy]

Show them how they should have done it Bill!

[@rayarsenault4774]

The disclaimer on the lock is because it's meant as an "overlock" or manager lockout for a self-storage unit.

[@drkcobra]

I would have loved to see how fast you could have raked it before you upgraded the core.

[@JohnDoe-bd5sz]

Let me go ahead and take a wild guess. The bitting is : 23433

[@ntrf-xyz]

And probably the entire model line has the same bitting

[@elonmask50]

Pin 6 is binding, in a five pin lock?

[@firesurfer]

It's was binding so hard, almost as though it wasn't there.

[@penfold7800]

Yeah I was wondering that.

[@thewoodworkingkid4370]

nice

[@peterinbrat]

Whaddya mean it's junk? It's got that notice not to open it!!!

[@LeHikushiniv]

i literally have a clone but is has a completely different core with steel pins and very insane pick resistance and you cant bypass it with a driver. its a clone of the american lock 700

[@lostboytnt1]

aww. so close, I thought you were going to finally show us a re-pinning.

[@thewoodworkingkid4370]

is it also bypasbol

[@billcarson1966]

I mean... the color is kind of nice. LOL

[@martinharper5112]

Bill. Question. Has American Lock made the lock for Baton?

[@martinharper5112]

Thank you. Most appreciated on that. M

[@mike_magnet_fishing]

Hey Bill any idea where I can get a master or american pinning kit in the UK

[@bosnianbill]

No, these would be hard to find in the UK. In fact, the only place I know of that sells something similiar is mrlock. You can find it here: mrlock.com/rekey-kit-291-for-master-lock-padlocks/

[@taeraresh2115]

LAB makes a rekeying kit for Master padlocks, but it doesn’t include the security pins. There are extra compartments you could put them in, though, if you got them elsewhere. www.labpins.com/locksmiths/p/mini-dur-x-master-padlock-rekeying-kit/

[@johnstag5437]

How come we never see a video of putting a lock back together?

[@elw38]

The sign is their because they did cut corners

[@phrozenwun]

"If you don't open it with a key that you own..." Says the guy who makes a career out of opening locks he doesn't own - I'm dead LOL

[@johndododoe1411]

*Actually owns the locks...

[@phrozenwun]

@@johndododoe1411 I thought Bill is or was a practicing locksmith, no? Not to mention challenge locks etc.

[@twjohnson1203]

The warning didn't exactly protect that lock much. Bill put a new slant on "breaking and entering"...the lock that is.

[@ghinckley68]

its probally a storage space overlock

[@Richard.212]

At least it was up gradable.

[@matsounds]

What pin kit are you using in this video and where can I get it from?

[@bosnianbill]

I've had that kit for many years and they probably don't make it any longer. The only place I know to find something similiar is here: mrlock.com/rekey-kit-291-for-master-lock-padlocks/

[@matsounds]

@@bosnianbill cool... Thank you! One more thing.... Can you think of a good security pin kit for American Locks?

[@bosnianbill]

@@matsounds Same source. You'll probably have to buy the security pins separately instead of a kit.

[@SnabbKassa]

I bet the Chinese copies are easier to get in Europe. I don't think any European or British distributors have American Locks.

[@tomherron4334]

I guess copying is the greatest form of flattery.

[@lockhak33]

How much was this lock?

[@umbraelegios4130]

Send it to BigClive he likes pink and lock picking.

[@leethomas1883]

😎

[@thewoodworkingkid4370]

like the real amarcan

[@Hunglikeagrimsmo]

My girlfriend has a pink baton but it's not a lock 😉

[@BenSmith-cm8oc]

Put an American core in it?

[@CandyGramForMongo_]

You mentioned pin six three times.

[@rnr233]

oooooooooo burazeru sa se radi

[@houstonbrumley5562]

I look good in pink

[@parapicktog7734]

LOL. Cheap knockoff, but we can fix it for a few cents. Why the h3ll would anyone use an upside down key pin for a driver??? That's just a gimme. It costs more and makes it less secure.

[@penfold7800]

I think you're trying to hard bill. You're looking for a reason this lock is worth what you paid. There's no pin6, and it's an easy bypass or rake. Well at least you tried to give it credit, but it wasn't due

[@frankbiz]

Wow what a crap lock, after Bill fixes it it will be decent. Thanks 😊👍🏻

[@DonzLockz]

A typical Chinesium clone. Its a shame the general public gets tricked by these crap imported locks.

[@johndododoe1411]

Greater shame the genuine ones are garbage too.