BOSS MS-3 , Metal ,Acoustic , and some effects

Boss MS-3 is not only a effects switcher , but also a multi-effect pedal , includes most of Drive , MOD , Dynamic , Reverb and Delay .
but how it sounds like ?
Follow us on Facebook :
/ captainstonestudio

[@JonCurryIsolatedGuitarist]

Yeah but how do you save the effects and switch from heavy back to guitar sim etc? I mean can you show how to actually use the ms-3? That would be really helpful.

[@arturocivit]

Hey! Nice video, wondering if you can share your metal settings? Great tone you have there!

[@CaptainStoneStudio]

Thanks ! Sorry that I just Factory Reset my MS-3 , but in this video I'm using Lead distortion for that wet sound .

[@dropdeadewok4801]

I’m new at this. If you make another metal patch like this, I would love to have your settings. And how do you et all channels to be at the same volume? Just with the patch level ? Thanks man

[@dropdeadewok4801]

HABLEMOS DE GEAR did you find any good metal settings?

[@dennisblomberg8394]

Are you using the ms 3 Only for that distorted sound.?

[@CaptainStoneStudio]

Yes I am , all sound was from MS3 through an clean amp

[@dennisblomberg8394]

@@CaptainStoneStudio Nice sound.!

[@CaptainStoneStudio]

@@dennisblomberg8394 Thank you!

[@andreshurtado2496]

hi, i have a question, i currently have a bias rack unit, im looking foward to buy some effects and that stuff to make it more usable, is it possible to use the midi output to control the channel selector on the bias, and use the ms-3 in a 4 cable way to use a tube screamer i already have in front of the amp and the built in effects on the es3 on the effects loop? so when i play a solo i can step on the preset button and activate the tube screamer suposed to be in front and also the effects?

[@andrevidigal1010]

Yes you can. I own a boss ms-3 too. I will have to use one of the 3 loops of the device to use de 4 cable method. It will last 2 loops and in one of them you can use de tube screamer and the other one one other pedal of your choice. Yes you can controll channel selection of any amp with midi in or whith de control out (trs jack). You can put the loop where de tube screamer is to go in front of the amp and put all ms3's effects before or after de lopps 1, 2 and 3 block. No noticeable sound latency. The unit is buffered so you wont loose signal amplitude.

[@EvanKenobi]

HI! Can you say what is the signal chain? I'm really curoius if there is a real cab or cabsim involved.

[@CaptainStoneStudio]

Hi , in this video , I go direct from Boss MS-3 to Bias Head ( JC-120 preset with Cab sim) and line in to my DAW

[@楊宇璿]

哈囉您好 想請問 如果我試著(吉他)--(ms3)--(ms3 send out)--(interface in)--(PC的BIAS FX只使用音箱頭其他pedal關掉)--(interface out)--(ms3 return in)--(mix控台) 這個概念是可行的嗎? 目前還沒有實際操作過 因為沒有MS3 XDDD 起初是想用ms3結合我的tubeman地板前級 但突然想到我時常需要直接line in到控台 為了彌補需要的後級才選擇用bias去填補

[@CaptainStoneStudio]

可行哦！我還用ms3做過4 cable method，設定好是可以這麼做的哦！

[@楊宇璿]

前天衝了ms3 但發現一個蠻可惜的缺點 雖然這台可以串三顆迴路 但.....這三顆迴路是鏈在一起的 不能更換擺放位置.....可惜

[@llmm2211]

很好奇你到底有幾隻吉他 聽說prs和gibson聲音滿相似

[@llmm2211]

很好奇你到底有幾隻吉他 聽說prs和gibson聲音滿相似

[@CaptainStoneStudio]

哈哈，其實因為生活關係，電吉他擁有的只有兩把了，不過還有一些不是我個人的在手上所以才感覺比較多

[@CaptainStoneStudio]

kzbin.info/www/bejne/f3vGZWV9grKljLcm3s 實際上我覺得聲音差滿多的，不過配置上類似所以基調上說像也沒有不對，但是包含琴頭的角度與Scale長度等等，其實都會有差