Boss RC-600 iPad Midi Controller - RC-600 Midi Assigns Part 3

In this video I will explain how to setup all the Midi assigns in the Boss RC-600 that will work with the iPad app. Be aware that Boss lets us have 16 assigns per memory. However you can not save these assigns for all the memories at one time. So they are not a system setting. It is best to save one memory with all your favorite settings as a template. Just use the template for all your new creations and save it to a different memory number.
Part 1 : Demo Link: • Boss RC-600 iPad Midi ...
Part 2 : TouchOSC App Set up Link: • Boss RC-600 iPad Midi ...
Part 3 : Midi Assigns on the 600
Part 4: Memory Select Up & Down: • Boss RC-600 iPad Midi ...
Boss RC-600 Parameter Guide Link : static.roland....
Boss RC-600 Manual Link : www.boss.info/...
TouchOSC Editor: hexler.net/tou...
My Set Up Pic: 1drv.ms/u/s!Aq...
iPad Holder Pics: 1drv.ms/u/s!Aq...
Holder for iPad Midi Controller:
www.amazon.com...
Holder for iPad Pro: www.amazon.com...

[@nessadove1369]

These videos have been super helpful. Thank you SO much!!

[@bsmusic3460]

You are welcome. I have been using this set up at gigs for 3yrs now. Getting ready to change the OSC layout a bit.

[@nessadove1369]

@@bsmusic3460 🙌🏾🙌🏾

[@marknlulu0304]

Just a quick note to say a HUGE THANK YOU for figuring this out and sharing it in simple easy to follow instructions! It is awesome to use this inexpensive app to add so many more features for using my IPAD to work the BOSS RC600 with out needing to bend over. i just created a template and i’m off and running with so much more greater control. well done!

[@5721chevy]

Thanks Mark. You could make different layouts for a batch of songs. Enjoy!

[@bsmusic3460]

Mark, check back tomorrow as I am doing one more video on how to control the memories 1-99.

[@ministryinsong]

Genius. Thanks for sharing your progress and taking the time to explain so clearly. Much appreciated.

[@bsmusic3460]

Thank you. I hope it helps.

[@WerIstWieJesus]

Boss should definitively provide an officIal App. If you want to use the pedal with your feets you can't change settings by hand. There must be at least a button to change effect banks and a button for the forth effect on the input and the track. There should also be a button to change memory banks.

[@bsmusic3460]

All of that can be done on the ipad

[@africanrhythm]

What USB cable you using ? Any settings to connect RC600 to iPad

[@bsmusic3460]

Just a regular usb cable from camera adapter to RC600. Its all in the videos

[@artnelsoncreative]

how are you attaching the iPad to the RC 600?

[@bsmusic3460]

It shows in the videos. Ipad camera adapter

[@Mattbuchanan71]

I can’t get mine to work can you show what your midi settings are on the RC? (The general settings?)

[@bsmusic3460]

Matt, Make sure you assigned a midi number on the touchosc editor. It is on video 2 at 12:28. You have to set channel to 1 and number is the midi number you assign. Go to video 3 at :34. Click assign , switch set to on, Source is your midi number, source mode is moment for sliders and toggle for on off buttons, Target set to what you want to control. That should do it. Dont forget to save it. Keep in mind the assigns are not global, they are only saved to the memory you have selected. Best way to do it is set up a template with all your assigns. Name that memory template. When making a new song use the template but save it to a new memory. That should do it!

[@bsmusic3460]

Make sure you have the rc600 set to use the usb cable from the ipad

[@TpyoQueen]

@@bsmusic3460 How do you set rc600 to do that?

[@davidcrocco7681]

Hi. Great tutorial. Thank you! I followed all of your instructions. Everything looks great. One problem. The iPad isn’t seeing the RC-600. I’m using the Yamaha MD-BT01 for Bluetooth to midi. Thoughts?

[@5721chevy]

It might be the bluetooth adapter. I have the lightning connector hooked to the iPad and a standard usb cable hookup to the lightning connector to the 600. When you went to each assign did you turn the switch to the on position?

[@davidcrocco7681]

@@5721chevy I did. I’m m trying to control the boss RC 600. I have the MD- BT01 plugged into the midi slots in the RC 600. It’s strange because there’s another program out there that sends and receives cc controls from the iPad and it works just fine. However, on that program there are menus to select the Wi-Fi signal you’re on. as well as a menu to select a Bluetooth connection. I don’t see that on touch OSC. I only see the MIDI menu. Thank you so much for your response.

[@5721chevy]

@@davidcrocco7681 Did you try just plugging in a usb cable to the 600 and the iPad?

[@5721chevy]

Doesn’t look like TouchOSC supports Bluetooth. Enjoy the weekend.

[@davidcrocco7681]

@@5721chevy I’m sure that would work. Just looking for a wireless solution. Thank you.

[@paul.mccarthy]

Thanks for the video! I feel like there's a part missing though, where do you assign the midi events in TouchOSC? For example you start this video saying that CC#01 is All Start/Stop, but I think I've watched all your videos and you never set that up anywhere in TouchOSC. Thanks!

[@bsmusic3460]

Thank you. Start watching video #2 at timestamp 16:00. This is where you enter the Midi number you are going to assign to the RC600. It is under Midi tab and goes in next to where it says number. I hope this helps.

[@paul.mccarthy]

@@bsmusic3460 Ah, I'm using TouchOSC, not TouchOSC Mk1 so the interface I was looking for in the video was quite different. Here's the correct timestamp if anyone else is looking for it however kzbin.info/www/bejne/oHqYhXeVZq-Yjrs Thanks again.

[@bsmusic3460]

@@paul.mccarthy Your welcome