Bowdens Own Mega Snow Job Test And Review

[@EvolvedDetails]

Hey guys I filmed this one yesterday and since we all seem to be in lockdown thought I'd just release it today.

[@AussiePom]

I have a gerni pressure washer and I only use about half a cap full of Bowden's green snow foam and then fill the snow foam container to the brim with water. Due to the high pressure of the gerni even on the lowest setting it blows it out in a thick foam looking more like whipped cream. After hand washing my car and rinsing it off I use a garden leaf blower to blow the water out of all the nooks and crevice's ready to apply polish which I do every time I wash the car. At 15 years old people still think it looks brand new.

[@Dave30867]

No matter what you use you will still have to manually hand wash your car to get it looking its best. Foam is a great way to soften up the grease and dirt as a pre wash .

[@EvolvedDetails]

Yes that's right and that's what these are advertised to do, Although if a cars slightly dusty but doesn't need a full wash I sometimes foam, rinse then use an air dryer so can get a nice touch free wash dine

[@Ian_P]

Thank you. Love the slow suds captures. I got the yellow Snow job, does a decent job and smells great. I also use a similar Ryobi Pressure Washer. I got their Foam Sprayer (RPWA-FSA) from Bunnings, ($19.99); works great.

[@EvolvedDetails]

Thanks Ian, I haven't tried out the yellow snow yet I'll have to check it out. Yeah those little ryobis are great aren't they and can't be beaten for the price

[@countrylivingandlifestyle]

This was super helpful. Will pick up the attachment for the same pressure washer tomorrow. Cheers legend !

[@felixj2063]

@@EvolvedDetails hey mate, I have the same pressure washer! I couldn’t find any retailer selling a short trigger gun for this particular Ryobi with quick connect. Can you share where you get it from and which adapter to use please 🙏🏻

[@EvolvedDetails]

@@felixj2063 hey mate I got mine all from ebay years ago and have to get a bunch of adapters to make it all work. I Don't have the list of what I bought anynore but you can go to magic mobile detailing and they can make a kit up for you to convert it all

[@felixj2063]

@@EvolvedDetails thank you mate!

[@fps-gs3hz]

I have some of this at home and use it when the cars are extra dirty and you're right about the cleaning ability, I use it on a red car and when rinsing I watch the dirt fall away which I hadn't noticed as much with other snow foams

[@EvolvedDetails]

Good to hear as I was definitely impressed when I used it

[@theblade66]

Thats a great video , very impressive thanks mate. The music where did you get that from while the suds were working there magic. I could listen to that after a hard day's work. And a couple of beers 👌 great clean job wife would of been happy with the results.. keep up the great videos !

[@EvolvedDetails]

Thanks mate, the music was from epidemic sounds but I can't remember the name of it unfortunately

[@theblade66]

@@EvolvedDetails all good mate

[@watchingvideos4498]

Have been tempted to pick some of this up for a while and looks like you've sold me on it now

[@EvolvedDetails]

You won't be disappointed, I just wouldn't use it every wash as it may strip down any wax or sealant a little faster

[@ilikechickensausages2075]

I have found Auto Brite Maggie foam to pull a lot of red farm mud from my neighbours ute But that was 200ml and 800ml water. Will have to wait for it to get more dirtier to try this Product out. Have found not doing a pre rinse to pull more dirt from the paint but that's my opinion.

[@EvolvedDetails]

I'll have to try the Auto brite out I do have their Alcantara cleaner and like it so have been wanting to try more from them

[@4b11thatch]

Great video man, I might have to pick some of this up

[@EvolvedDetails]

Thanks glad you liked it

[@robjh80]

Firstly, fantastic job on the video, will have to look into picking up one of these Bowdens Own Mega Snow Job kits ... Secondly, what is the music you use in the video ?, loved it ... sounds like Workbench ? but I don't think it's one of Sebastian's tracks.

[@EvolvedDetails]

Thanks mate, I actually can't remember which track I used as I just get all my music from epidemic sounds and I just find one that works and use it.

[@HaveOneWithHans]

Much prefer this to the normal snow job as it softens the dirt and grime on the paint more. I spray wheely clean on my wheels then go over the whole car in mega snow and heavily rinse it all off without having to touch the wheels. I give the wheels a big clean once a month though

[@EvolvedDetails]

Definitely seems to have some great cleaning ability.i wouldn't want to use it every wash personality though as I think that would cause my ceramic coatings to to fail a little early

[@TezNguyen]

@@EvolvedDetails can you go into more about this please? since i also have ceramic coating on my car, spent a fair bit on it idk it to get fucked up too soon

[@EvolvedDetails]

@@TezNguyen you want to use a PH neutral soap for maintenance washes if you have a ceramic coating. The pro I used here is something you would either use to help strip down the car if it hadn't been washed often or was extra dirty. Using something like this product too often will wear the coating down a little earlier

[@TezNguyen]

@@EvolvedDetails ahh i see i see...thanks brah :)

[@damomartin76]

And it smells great too 😉👌

[@EvolvedDetails]

It definitely does

[@高詩涵-q9q]

that looks great, could i ask you what brand of the high-pressure washer you used, please?

[@EvolvedDetails]

Hi I use the ryobi 1800w pressure washer

[@sandy2boxer]

Hi, Have you ever tested autoFinnese Avalanche? I have both but found Avalanche Cuts more Dirt. What's your view on that ??

[@EvolvedDetails]

Hi no I haven't used Avalanche I ended up moving to Carpro Lift as my pre foam snow when I need something a little stronger as I found it quite cost effective in bulk sizes but it seemed to clean very similarly to the Bowden's when I compared them directly

[@DARTHPHIKL]

How do you rate this compared to the Mirch Decon? I have used it a few times and works really well to decon my ceramic coating.

[@EvolvedDetails]

I definitely like both but would need to compare them directly to really say. Without comparing I think I liked the bowdens a little better.

[@DARTHPHIKL]

@@EvolvedDetails Cheers. Might get some while the Repco sale is on

[@jethrox827]

So is this the holy grail of touchless washing or do you still need to wipe over?

[@EvolvedDetails]

Haha no you definitely need to still wipe it down. Sometimes if the car is not too dirty I'll do a foam like this then rinse and blow dry which is touchless

[@filiplaskovski9993]

How many psi is ur ryobi mate ? Or Lpm? It makes pretty decent foam !!!!

[@EvolvedDetails]

Hey mate it's an 1800psi, not sure of the lpm but it's the cheapest ryobi on bunnings if you wanted to check it out

[@ideefixxe]

Hey mate where did ya get the quick connect for the snow foam bottle? Cheers

[@EvolvedDetails]

It's from bowdens own they sell different attachments for different pressure washer

[@ideefixxe]

@@EvolvedDetails thanks mate.

[@zackgrigoriadis4377]

Is this product too strong for ceramic coated cars!?

[@EvolvedDetails]

I wouldn't use it every wash but really it would be fine as the ceramic coating should easily withstand it

[@basilkuriakose8362]

Hi mate , do you pre rinse the car before applying the foam. ?

[@EvolvedDetails]

Hi sorry for the late reply, I use these before rinsing so they can dwell longer at full strength

[@sarvove]

No you don’t

[@100reality2]

I got the Bowden nano and to be honest very disappointed the two cars I used it on had dirt water marks all over.

[@EvolvedDetails]

Ohh that's no good maybe try their auto body gel as it can be used in the sun and should waterspot

[@100reality2]

@@EvolvedDetails I'll go back to a bucket and sponge it's far cheaper and does a much better job.only disappointment is I can't get a refund on the snow cannon and rubbish overpriced soap.

[@EvolvedDetails]

Nano is meant to be used in a bucket and not in a foam cannon. They have a dedicated snow foam for the foam cannon that's meant to losen the dirt and Grime before using nano in a bucket. Snow foams aren't meant to be a one step wash unless the car is just dusty they are designed to be used before the contact wash stage

[@vtwin1979]

If you pressure cleaned it first you would have removed about the same as with the foam. You still need to wash it with a mitt anyway. It’s all just a money making marketing ploy.

[@EvolvedDetails]

No pressure washing doesn't do nearly as much as a pre soak in foam. There's multiple videos of people testing foam and rinse vs just rinse and there's a clear difference For most that effort isn't worth it but if you've paid money or spent the hours to remove the swirls from your paint then generally you'd want to use the safest possible wash process to avoid putting swirls back into the paint