Ducati Belt Drive 2V Cylinder head strip for reco - in this case 900SS

[@tomvoxx4082]

Class A+ Mechanic.

[@cfish64]

ive got a 2001 900ss and the lower/horizonal belt runs off the cam pulley .... runs off like 2-3 mm rubed on the outside plastic case at one time..... wondering if you know what might be causing that...

[@Mechanikus01]

Locks like you had made that very often. So I have a question. I just have an problem. I think the Ducati exploded drawing is wrong. Ore not? The bearings are not in the position in your had than in the drawings. I just put it together and do not know what is right.

[@bradthebikeboy]

There's two bearings to fit into the head and it's pretty hard to put them anywhere else. need more info as to what you have and what you're trying to do.

[@Mechanikus01]

@@bradthebikeboy I take new ones in and see the drawing maybe wrong. The 2 bearings on the gear side must have a socket between. In the exposed drawings they have that not.

[@Mechanikus01]

Sorry my English is not perfect

[@bradthebikeboy]

@@Mechanikus01 between the bearings is the tacho drive gear on the horizontal and a steel tube spacer on the vertical.

[@Mechanikus01]

@@bradthebikeboy ok thank you. So I was right. The exposed drawings are wrong.

[@pietroguidone7163]

why do the belts come off the pulleys by 2 mm with dayco tensioners? It's normal ?thanks❤

[@bradthebikeboy]

really not sure what you mean. i've not seen dayco tensioners.

[@rustygardhouse7895]

More knowledge!

[@artmchugh5644]

Put 198,000 miles on my ST2 and never had the heads off 😊😊😊😊😊

[@xyesman5519]

Orizontal cylinder 😉