Braeden’s 875+awhp EVO X is BACK!! and we broke it immediately...

[@jdwdrums]

Hey man, is this a T4 divided kit? What A/R housing did you go with on the 6870? and what rpm are you hitting full boost at?

[@NewUser0998]

Damn this thing is nuts, no expense spared!

[@berttnotbought804]

Thank you for the compliment, views, and support! Braeden wanted this car to be able to run hard and aside from the spark plug mishap, it absolutely GOES! Sitting in the passengers seat was like 🤘🏻😟🤘🏻 stay tuned for more!!

[@lukusaldridge7660]

New to the channel. Clean build. Do you know the back spacing and width of the Welds that you’re on? Any spacers or shaving needed on the wilwood setup?

[@berttnotbought804]

Thank you! Appreciate it! The back spacing is 5.5” and the width is 8”! 15” diameter. When we set the car down on the ground and backed it out, the passenger rear was grazing the inside of the wheel. It didn’t touch when off the ground. So if you do this set up or similar. Check clearance before moving the car. Fronts seemed to clear just fine! No spacers needed. Possibly some shaving.

[@berttnotbought804]

Also these are an STM kit. We can’t speak to how wilwoods would fit.

[@lukehorvath51]

What ignition coils are you using ?

[@berttnotbought804]

OE

[@MrOGseed]

Yo, what was that intro song? It was fire af. BEAUTIFUL EVO BTW.

[@berttnotbought804]

Thanks a lot man! The song is called 1999 but it’s stock music from Adobe by triple scoop music so I can’t find the actual artist to give you a name unfortunately. I’ll be sure to use it more! Thanks for the support and kind words 🙏🏻

[@kcarroll60]

Omfg 🤣🤣 my stomach hurts. A set of YEETER plugs with a side of banana ham sammich please!

[@berttnotbought804]

That particular plug was a “yeeter deleter”.

[@rallydrew]

Do you not have a parking brake or does your staging brake have a lock on?

[@berttnotbought804]

No parking brake right now. We are thinking about putting a line lock in the staging brake but so far first gear is doing the trick.

[@rallydrew]

@@berttnotbought804 I had a hydro ebrake (drift boi stuff) that had a lock out pin in the pulled position so I technically could leave it running and not roll away while I ran inside sheetz for a snack

[@berttnotbought804]

Lmao. Thats essentially what we are going to do

[@rallydrew]

@@berttnotbought804 love the mullet by the way!

[@berttnotbought804]

Hella mullety

[@drew_x]

What plugs did you use

[@berttnotbought804]

NGK-R ILKR8E6 gapped to 0.020” is what TPG used and recommends

[@mikelbring]

Brisks ftw

[@berttnotbought804]

Brisks are solid no doubt. These are just what it was tuned on and until we talk to Nate or Jason at TPG about it we are going to stick with the NGK-R’s

[@mikelbring]

@@berttnotbought804 Is the motor ok?

[@berttnotbought804]

Yeah seems to be. We haven’t ripped on it yet. There will be a video on it. We replaced the plugs, checked and cleaned the injectors, borescoped it and compression tested it. So far it seems fine. It sat with these plugs in it while it was being built over the last year. That time covered in E98 is all we can attribute this too. 🤷🏻‍♂️ At this point we just run it and find out.

[@nextrider123]

if im not mistaken, won't this car need a cage?

[@berttnotbought804]

Oh you are 110% correct. Lol we are going to do a couple test hits this year with it to shake it down and at the same time determine what cert the cage needs built to.

[@seleckt6600]

I think you might be leaning out just a tad if you're turning your spark plugs into fucking lava

[@berttnotbought804]

Not everything can go perfectly every time. Sometimes stuff happens with big power… We are currently planning our method to determining where this issue originated and how to countermeasure it.

[@richardknight307]

Bloodclaat me general 🇯🇲. That reminds me years ago in the islands I had a 1800 gsr and did a plug change out. Didnt know the type to use and melted my pistons. Jah know star....All the best anyway in your rebuild.

[@berttnotbought804]

Sorry to hear about that bad luck. It sucks but it happens. Luckily we got off east and the car is okay at this point but we know with as hard as it’s being pushed it’s days are numbered 🤘🏻

[@richardknight307]

@@berttnotbought804 me general jah know me feel it. But a so car world go. I'm in the process of fully building my evo x. I've FBO making 540/387 now so hope by year end I should have in the vicinity of 800hp on a 6466 precision.

[@berttnotbought804]

Keep us updated man!! We are pulling for you! And if we can help let us know.

[@isaiah24.5]

That sucks! I did the same when I blew my motor after the Meth... no worries you probably need to just redo the head. Your valves are pretty much screwed in cylinder #1. Nice set up though 👍

[@berttnotbought804]

Lol… thanks for the keyboard diag.

[@isaiah24.5]

@@berttnotbought804 have you pulled apart the motor to see what’s wrong?

[@berttnotbought804]

Borescope, leakdown, and compression tested, all good. Cleaned, checked and tested all 4 injectors, all within ID’s specs. Replaced spark plugs. Everything was healthy except the plugs. The engine was running on E98 for short durations as it was moved around the shop it was built in. The unburned E98 tore the plugs up and this one was the first to let go. We’ve run it since and it’s smooth and healthy again.

[@isaiah24.5]

@@berttnotbought804 your blessed: I would definitely be checking the air fuel ratio in that cylinder... seams to be running lean. Hot temps cause the plug to burn away the electrode and result in breaking of the ceramic core. Look forward to more videos 👍

[@supernice_auto]

@@berttnotbought804 what do you mean by unburned e98 tore the plugs up that's the first time i'm hearing of something like that

[@antoinejones2278]

Hopefully the rest of the plug made it down into the oil pan

[@berttnotbought804]

I don’t think that’s how that works lol. But it did pass it out the exhaust.

[@osirisblaster]

Wait what? In what world would it be good for the plug to make it the the oil pan....the only way to the oil pan is through the piston.

[@lcameeno1]

100k evo

[@berttnotbought804]

Feels like $100k! $50k and it’s yours 😂