Brake Light, Tail Light, Turn Signal Bulb Replacement, 2014-2019 Toyota Corolla

[@CleverFix]

If you enjoyed the video, please give it a thumbs up 👍. Your support helps me create more content and is greatly appreciated . If you have any questions , comments , or suggestions for future videos, feel free to leave them below. I love hearing from you and look forward to your feedback !

[@beetlesaretrying4621]

This video just saved me $300 in getting a mechanic to do it for me. Thank you!! I have my brake lights back, baby!

[@ishmaelm1932]

These mechanics are getting crazier and crazier each day.

[@valevisa8429]

No way he asked for 300$.Dealership charged me 44 $,and they are the most expensive.

[@MrSkilledAce]

I thought this was going to be a lot harder but this video made it very easy and straight to the point. Great job! I have a 2015 Corolla but I’m subscribing anyways

[@emalyah732]

Dang.. that was easier than I thought. Thanks for your tutorial!

[@fernandovchen]

Congratulations on the video man, great job. Short, clear and the links to buy at Amazon are just amazing. Already subscribed in your channel since a 2014 Corolla owner.

[@martapinzon2076]

Gracias gracias gracias, first time doing something in my car, I feel so proud, super clear

[@AlexandreCMATTI]

Great video! Driving a 2014 for one day because I got a flat on my Taurus and of course got pulled over for brake light 😂 changing it now!

[@AlexandreCMATTI]

And I broke that stupid plastic screw! 😂

[@CleverFix]

Hope you didn't get a ticket. Thanks!

[@stuartnoakes147]

Great video. Not to long and a good, clear exploration. Thank you very much.

[@CleverFix]

You are welcome, thanks for the feedback!

[@erlin3036]

Quick and easy. It just helped me right now.

[@CleverFix]

Awesome!

[@sorrowfulgrace2984]

Thanks for the help. It was so easy and simple following this video.

[@esauduran5074]

Thanks for your tutorial, Gracias por compartir tus conocimientos, saludos desde Zacatecas, Mexico.

[@ahmedj6301]

Great video. I was able to change my own brake bulbs. Thanks a lot.

[@CleverFix]

Thank you!

[@nextflicks169]

Good, I like your video. I'm just wondering if I need to replace the rear side marker lights, do I have to remove the whole tail lights?

[@CleverFix]

No, don't have to remove the whole light assembly to replace bulbs. Both bulbs are shown in the video and they are behind the carpet. One is "brake+sidemarker" combination and the other signal bulb. So if the side marker is burnt out, it's the bottom bulb, clear color.

[@chengchia5861]

Can’t seem to find the third brake light replacement for Corolla 2014

[@CMoore-Gaming]

I got a 2017 and this was perfect, thanks

[@zahoriwright8282]

Very in depth and helpful!

[@CleverFix]

Glad it helped, thanks!

[@Ruweisat]

Thanks for a simple tutorial.

[@Luismar10f]

You’re the best! Thank you very much for this video and for such a good explanation

[@CleverFix]

Thanks, Glad it was helpful!

[@richardyap7873]

I like you steady voice and clear video presented. Subscribed.

[@CleverFix]

Thank you!

[@jessebarragan3930]

I wish all videos were this in depth even when I don’t need them to be. Because everytime I do need an in depth vid I cant find it

[@CleverFix]

Thanks!

[@sjdude12]

You’re amazing! 👏🏼 TYSM for this. 👌🏼

[@matthewhathaway2259]

hey my 2014 corollas rear driver side tail light is working, but wont light up more when i press the brake? would the bulb be causing that problem even though its lighting up as marker lights?

[@jamesconn1104]

Thank you !! very helpful vid !! 2014 Corolla brakelite bulb out !! Thanks Again !!

[@CleverFix]

Glad it helped! Thanks.

[@edsonemanuel2541]

Do the lights on the trunk work ?

[@ydwatt8711]

Very helpful, thank you

[@MozammelShishir]

It’s really awesome and helpful

[@CleverFix]

Glad it was helpful!

[@datboyboogie1885]

is it the same with strobe lights?

[@sisjessi9590]

nice to meet you .do you need to buy led?we are led manufacture.

[@davinp]

Note Toyota refreshed the Corolla for the 2017 model and the lens is different on the SE/XSE trim. It is completely red with a white strip which is a LED light (tail light)

[@SayYes2Scorpions]

Thanks for the help!!

[@mikbronev1319]

Thanks for video. First time writing on here. I own an old Toyota Matrix 2004, basic model. There's an issue with the rear brake light on the right. Left side is fine. Tried to change the bulb. it's not that. Pushing break pedal only lights the left side. I also noticed that when the engine is off, and I turn the headlights to high beams, the lights in the back also light up - and both sides. - all the lamps! I know, this sounds like a mistery. Any advice would be aprreciated. Thx.

[@CleverFix]

You'll need someone to do some diagnosis.. Try to find a mechanic that's good at electrical testing. Are you absolutely sure it's not the bulb? Brake bulbs have two filaments, one to light up half way, the other to light up even further.. it's possible that it lights up half way but not all the way if the second filament is broken. If you've made sure the bulb is good, then some electrical testing is next.

[@mikbronev1319]

@@CleverFix Thanks for your quick reply. So finally I solved the issue. The bulb I replaced was the turn signal light. The brake light that was bad was further up, which I failed to notice on the first couple of tries. So, I popped the new one in, and it worked.

[@MrGoldInfinity]

Simple question, but I’m not very good with cars. On my Corolla, one of my tail lights only illuminates when braking. Why am I having this problem and what do I need to do?

[@CleverFix]

You need to replace the clear bulb in the video which is the brake bulb. It has two filaments, one must be burned out.

[@gemubezu5425]

Thank-you for help

[@carloslandeau2833]

Great info!! Thanks!!

[@CleverFix]

Glad it was helpful!

[@rye_1s_art760]

Great help !

[@SweetHaley]

Great video!

[@germanpule3721]

Does the battery need to be off?

[@CleverFix]

The car should be off, with the lights turned off. If the lights are on, then putting in the new bulb will turn it on right away, which is not good, because it will be bright and get hot.

[@ch3r7y]

Thank you. 🙇🏻‍♀️

[@Beastdiesel1]

Thank u sir

[@CleverFix]

Welcome.

[@naveedekhan1]

Thanks

[@Andreggs-v7k]

But there's 3 bulbs how about the one is not visible to access?

[@CleverFix]

There are only two bulbs. One bulb is a combination bulb, so it has two filaments inside, for the tail light as well as the stop light. It's basically dimmer as a tail light, and becomes brighter when the brake is pressed.

[@Andreggs-v7k]

@CleverFix roger that! Thank you for ur kindness 💓

[@arthurevans2029]

I know how and it's pretty simple, but I just thought I'd be the first to mention that it says TAIL LIGHT but shows BRAKE and TURN signal.

[@CleverFix]

The brake bulb is a combination brake + tail light, it has two phases. But you're right, I should mention all of them in the title.

[@vincentbernard9445]

You wrote TAILLIGHT

[@Vgallo]

Still wrong g bulb

[@rb188]

Couldn’t get lightbulb out. Think I broke it. Lol fuck this shit

[@mmamackenzie8988]

Solid video. Thanks!