Brake pad upgrade for the Audi TT MK3

Click the link bellow to get the brake calliper tool I used in this video!
UK - amzn.to/3Sa6jQK
Europe - amzn.to/3Q7yZrJ
huckandhope.com
@james.a.vickers

[@gerrywhelan5761]

The rear piston will not go back until you screw it clockwise to full, then compress it back, how did forget that fairly important bit 🤔, like if a DIY guy tried to get it back the way you showed it he could be forcing it back puzzled for some time and perhaps do damage.

[@michaelseg9925]

Hello there, How did the Racing Line Pads feel after some use? Happy with the purchase of RP700? any reports on noise, stopping performance would be greatly appreciated. Thank You in advance

[@James.a.vickers]

Hey Michael! The pads are great no noise at all under normal / spirited driving they are fine but I live in the mountains and it can get pretty hot here as well so if you are really going for it on the switchbacks after a while you do feel the brake fade a little bit. Next time I would change the disks at the same time. Hope this helps!

[@michaelseg9925]

@@James.a.vickers Thank You very much for the feedback. All the best to you!

[@shafer.k.cnileshwar8967]

How much time to get dry paint ? I also bought toxic green how is the current situation

[@James.a.vickers]

Hey! Thanks for the comment 🙏 I waited a couple hours between coats and the. Left it over night. I’ve got no problems at all, colour looks great! Easy to clean and still as bright as the first day good luck! 👍

[@ITSARAPPTTRS]

Yes you should have done that first and then painted them but you knew that 🤦🏻‍♂️ 😂

[@James.a.vickers]

😂

[@guljarahmed1214]

What are the torque settings for the rear bolts

[@James.a.vickers]

Hey Guljar, Sorry for the late reply! Calliper to carrier is 35nm carrier to hub is 200nm 👍