Brand NEW Maxx Model Hop Unit M4A

[@giantgiant268]

Just ordered some parts and read you're from new york on your website. Watched you're video upgrading some lancer tactical. Thanks.

[@TheRealDealAirsoft]

Much love brother. Youl get your order super fast if your in NY. Thank you so much brother !

[@itsleshhh7704]

The reallll deallll

[@ashleyberardi1139]

Lovee the red lights in the background

[@pacojr8206]

How many do you have in stock?

[@josephjisungpark5032]

would this fit on my cyma platinum internals cm.105 DDM4 EMG Daniel Defense?

[@mihailanchev8764]

Thank you for the video, looks like it may be finally time to upgrade my hop unit. What I don't understand on this model is the inlet adapter, is that for fixing the nozzle length issues that were on previous models?

[@TheRealDealAirsoft]

I’m going to do more testing to find out exactly what the applications are for the other inlet adapters

[@timcheng144]

Is there a tracer unit for this thing?

[@jagon55]

anyone else have the problem where the default flat nub does not press down far enough for a flat hop setup? im using a prommy purple thats had the nub shaved down for flat hopping. with the default flat nub maxed out, it does not press down far enough to hop a .32 gram bb. I made two shims made from hard paper from the maxx hopup unit packaging which allowed me to barely over hop the .32 on max hop. Im sure MAXX made these knowing users would be using a flat hop setup since its so popular so why was it engineered so poorly for that application.

[@speedsoft]

I just ordered this M4A unit for my polarstar jack build without realising theres a chamber specifically for polarstars.. but my build is all red, will this chamber still work??

[@TheRealDealAirsoft]

Brother , you need to read product descriptions before buying parts. Part of Maxx Models new line of hop units, they specifically made a unit for each platform. They made a unit specific to HPA POLARSTAR systems. i doubt the system will perform as consistently, there are differences in the specs. If you ordered from my website, then email me with your order number and we’ll send you the correct one. If not then contact the store you used and request to have the M4P sent to you. There’s no reason why you shouldn’t get what you want. If your spending the money might as well get the correct part. Youl be happier in the end

[@williamcranmer9778]

Hey @realdeal, I have a quick question. Is this compatible with the g and g arp9? And if so what nub would work best? Thanks for the video and good job too! :)

[@TheRealDealAirsoft]

It would indeed work with a g&g arp9. Tho the stock hop unit is good too The nub all depends on what type of bucking your using / set up. If your using traditional rubbers then use the hop nub that has the soft type nub if your using a mr hop or r hop use the default hop tensioner

[@williamcranmer9778]

@@TheRealDealAirsoft Thank you for replying! That is good to to know. I am using the stock bucking but might upgrade to the Prometheus Bucking. Is that a good bucking?

[@jhqtech]

@@TheRealDealAirsoft u think flat nub works better with mr hop than the concave nub? I run all the metal concave nubs with mr hops currently

[@TheRealDealAirsoft]

Prommy purple is an ok bucking , kind of old tech now a days. Prommy ourple will not fit in Maxx units but should fit in the stock g&g unit

[@TheRealDealAirsoft]

So I also used to use the metal hard concave nub but I found an issue here and there that in the past with previous models , some times the sharp edges would apply odd pressure and sometimes ide have consistent flyers to either the right or the left. Then I would lightly sand the edges to make the concave more smooth and less sharp on the edges. With the soft nub that issue isn’t a variable anymore. Granted you might need a higher level of hop but it’s very controlled and precise. I recently added the 6mm soft nubs to my next order so upon the next Maxx delivery for real deal we’ll have the 6mm soft nub for testing

[@ericsoo4330]

hello i got the polarstar one for my vfc416 a5 been having feeding problems

[@crossvo93]

I think the Concave Nub is best match for ML MR. HOP???

[@zacbaker4059]

Thanks for the video. Definitely would have gotten the wrong one for my hpa setup had I not watched this

[@-TRiiX-]

@the Real Deal Airsoft so just i understand the top grub screw turns cw to loosen and ccw to tighten didnt wanna strip that thanks bro you tha go to

[@edgarh.8087]

Would this work in a Krytac mark 2 SPR? With Krytac mags?

[@nikolauzunov4643]

What tool do i need to remove the hop up arm i want to switch the nub but i cant remove the pin

[@jordancook5171]

Have you been able to try this new unit qith a lambda 6.01 barrel?

[@TheRealDealAirsoft]

Amazing combo

[@johnmurphy3242]

Is the EMG Maxx Hopup (the Evike x Maxx version) the same thing as this M4A or is it just a blue version of the ME Pro? Cause people keep telling me its different from the M4A others say its the same but colored blue and has EMG stamped on it.

[@devshell4912]

Nice. Might order one! Any idea if they work with the VFC Avalon series?

[@TheRealDealAirsoft]

Yes they do for sure just grab a Maxx nozzle to go along with it

[@ottovp]

@@TheRealDealAirsoft ty! any hint which lenght should i buy for my vfc 416c?

[@aymanrahman2332]

Go with the adjustable nozzles ,the 19-22 mm is perfect, I think the max recommended nozzle length for this hop up is 21.25 but they vary slightly due to mass manufacturing

[@ki3784]

Hello, I have having trouble with my bbs curving off to the left and I think it is due to the nub not applying pressure evenly throughout the bb. Could you please explain to me how to tighten or re align the nub to see if this fixes my issue, thanks

[@fubene5495]

It can be fixed just by turning the barrel a bit to the right, or maybe reinstalling the bucking if it doesnt sit properly. Another option is to buy a 7mm nub and cut it to your right window messure, sometimes 5mm nubs are smaller than you really need, omega nubs from maple leaf are small, and the maple leaf patch sometimes doesnt work well with OEM barrels, the maple leaf combo works flawless together (rubber, nub, barrel) but if you mix them many times doesnt work properly. I had this issue when using a retroarms hopup chamber, it comes with a nut instead of a shim to secure the barrel and preventing it from floating, if you tie this nut too much it tends to rotate the barrel so i had to turn the barrel a bit to the other side and solved the problem. Some times, with cheap barrels and chambers, the cuts on the barrel are not perfectly alined so when you instal the C clip to secure the barrel to the hop up chamber it rotates the barrel so the rubber patch is not properly siting on the barrel window causing this type of issue. After all of this, best solution??? Flat hop a bucking, and custom homemade big nub made from a plastic tube from a pen, you only need to choose the hardness of the bucking in order to the weight of your ammo. I use 50º silicone maple leaf to lift .28 really easy

[@bikerbros8693]

@@fubene5495 im curenntly using the krytac orange oem bucking and nub with a promy 6.03 387mm barrel in my krytac crb. actually its performing really well and consistent with the oem hop up unit. was thinking about getting the 2021 maple leaf 60 degree silicone bucking do you have any recomendation as a hop up combination? just fitted a gate titan and my warhead brushless is on the way too :D

[@ItsTheCamera_Guy]

What size allen key do i use for the grub screw

[@TheRealDealAirsoft]

It is Included in the unit. It comes with the kit. www.therealdealairsoft.com/products/maxx-model-hop-up-chamber-m4a-pro-red?_pos=1&_psq=m4a&_ss=e&_v=1.0

[@CallYaHits]

Just got the emg maxx m4a and the atlas blue bucking. What nub do you think Is the best to use with the ones it came with

[@TheGreatBooger]

Sweet! Have the ME Pro on my M110 build and UTR45. Building a new M4 and getting this. How do you wire the tracer to Redline N7 HPA engines. My M110 is mechanical so that’s easy as a battery with on/off switch. My UTR45 has a stock FCU and new M4 w/ Gorilla FCU.

[@MhDizzy]

Doea anyone have any recommendations for m4 mid caps that work with this? Im struggling with feed issues

[@rdrnd]

Do they make this with the tracer unit?

[@TheRealDealAirsoft]

They will be rolling a Module for these units soon

[@matthewsaunders3576]

Hello. Will this fit nicely into aps m4? A prowin isn’t thick enough on the sides so it doesn’t fit snug at all. The wings are too thin on them. Please let me know your thoughts on the changeable wings on these. Thank you.

[@TheRealDealAirsoft]

Yes it will work for your aps m4 grab a maple leaf bucking from my website also they work best with max hops

[@matthewsaunders3576]

@@TheRealDealAirsoft yes deffo a maple leaf. I currently got a ZCI barrel 6.02 stainless with a Mr HOP maple leaf rubber 60 degree hardness bucking. I also have the omega nub but everyone doubts them? Will the Maxx hop give me the new best nub for the Hop rubber? Thanks for getting back to me fast.

[@unjustbat907]

Hey real deal i find out about my stock wire the gear box v2 sadly the wire catch on fire my family told me something was on fire in the gear box

[@lukethompson7970]

How do I know which adaptor I need?? I have an Arcturus ar06

[@DarkWolfWRX]

Did they solve the lip protrusion issue with Maple Leaf buckings? All my prior Maxx units require trimming of the bucking lips, that gets old fast haha.

[@TheRealDealAirsoft]

I’ve installed a handful of these with maple leaf mr hop and no issues so far

[@jaredsalgado695]

awesome review but which option should I use for a standard AEG like a classic army x9

[@scotmetcalf2745]

Brand new to the hobby and wanting to do my own builds and there seems to be a lot to learn? I’m wanting to get a G&G ARP9 (because I like compact weapon) is that a good brand Airsoft? And what’s a good Hop up and R-hop barrel? Thanks appreciate any help and new subscriber

[@TheRealDealAirsoft]

I’m actually going to be releasing a line of super cool custom pre built aegs dropping really soon. If you don’t want to dabble with the upgrading these aegs will be pre upgraded heavily. Believe it or not your stock hop unit is great but the bucking and barrel is not so good. You can install this new hop unit with a maple leaf mr hop bucking and you will be happy. But again you can use your stock unit and uograde the bucking and barrel

[@derickdarvin1572]

is it safe to screw it out and act like a spacer for the gearbox to against the hop-up unit?

[@TheRealDealAirsoft]

Maxx sells different inlet adapters. Screwing it out is a bad idea. Vibrations will change positioning

[@jpgaerlan]

what is the size of the threaded screw on the hopup arm

[@TheRealDealAirsoft]

It’s like a .9 mm screw

[@jpgaerlan]

@@TheRealDealAirsoft thanks! now what is the actual screw size? I would really hate losing that, i need to prepare a spare.

[@chrislochi7281]

how the heck did you geta review out that fast

[@thelethalpredator672]

Cause he sells them on his site, and gets information faster than others since he is a seller

[@aymanrahman2332]

He's the real deal,simple as that

[@morgancfreeman6527]

can these be used with an aeg?

[@TheRealDealAirsoft]

The m4A is designed for AEGs specifically www.therealdealairsoft.com

[@morgancfreeman6527]

@@TheRealDealAirsoft great thank you so much

[@Adidas_Altyn]

Will the flat nub work with a flat hop setup?

[@TheRealDealAirsoft]

Yes but with flat hop you may want to apply more pressure so the best route is grabbing the maple Leaf Omega hop nub because that set up is able to apply a ton of tension the stock flat is more soft and will require like level 9 hop

[@TheRealDealAirsoft]

www.therealdealairsoft.com/products/maple-leaf-omega-hop-tensioner?_pos=1&_psq=omega&_ss=e&_v=1.0

[@Adidas_Altyn]

@@TheRealDealAirsoft ok, lucky me i already got it coming in. I also got the modify baton ryusoku flat nub too

[@calebmahala4263]

Will this work with the SSR4?

[@TheRealDealAirsoft]

Yes but use the reccomended nozzle

[@calebmahala4263]

@@TheRealDealAirsoft which size?

[@jhqtech]

Excited to try it

[@funplaymix7710]

Which nub would you want to use with the GG Green bucking?

[@TheRealDealAirsoft]

I never use that bucking. Only maple leaf

[@funplaymix7710]

@@TheRealDealAirsoft got a link to the one you use? And what nub do you use with it on this hop up

[@davidallison5570]

Will this work in a Krytac with an R hopped barrel I know the nozzle may be an issue as these accept 21-21.25mm nozzles and the Krytac stock nozzle is 21.4mm

[@TheRealDealAirsoft]

When you use a Maxx hop unit you need to use a Maxx nozzle. Maxx hop units require different nozzle length Just read Maxx instructions. With krytac 21mm nozzle always works perfect with Maxx hop unit

[@averageyoutubeviewer6156]

So which of the included nubs would work best with a maple MR hop?

[@dawidm19935]

Soft square one as far as I understood :)

[@Bigglenndaddy]

having trouble with the maxx sport feeding bbs, any suggestions?

[@TheRealDealAirsoft]

What nozzle and bucking r you using ? You need to provide more info man

[@Bigglenndaddy]

@@TheRealDealAirsoft sorry, new here. Stock emg F-1 bdr 15 parts

[@Inkesomnia]

So far. The max hop up have some feeding issue with my lancer tactical gen 2. Any idea ?should I change the inlet adaptor to 11.5mm or should I change into the Maxx nozzle 21.25mm

[@aymanrahman2332]

Get the adjustable nozzle from Maxx,the 19-22mm ,since they have those windows you can exactly see how far in and how far out it goes ,fixes your feeding issue and also gives it a perfect air seal

[@davidhewish20]

Hi can you please tell me if this will work with the SA-C03 core please

[@TheRealDealAirsoft]

Yes just use a Maxx nozzle. Each would work 21 / 21.25 / adjustable nozzle each bucking and set up is different but generally speaking the 21 mm nozzle almost always works with Maxx setups Also use a maple leaf bucking as well www.therealdealairsoft.com/collections/hop-up-units

[@arjan-nuts-gaming]

I've got a Mancraft pnik for my SR-30. Thinking to upgrade, I go with the MTW version or you recommend something else?

[@lukasbonnen1323]

Any idea which model, if any, is compatible with the KWA ERG/RM4? I have an older Maxx ME in one but would like to get a second for another build.

[@TheRealDealAirsoft]

Kwa and Maxx … forget about it

[@heroislegend]

@@TheRealDealAirsoft Not true. MAXX M4A will fit into a Ronin T10

[@intenttoattack2907]

@@heroislegend Did you have to modify anything for that fitment?

[@kylecaraway8662]

So I talked to my fields tech and he said these things are trash because they always have people who have issues with them. I’m thinking it’s probably because it’s not a beginner friendly chamber and the people just installed it wrong. The issue was feeding and the tech told me to stay away is this true?

[@thepompking8842]

No they just don't know how to set it up properly. I have the m4a and it's awesome. They just sound lazy to me

[@LaggyLandon]

Will this work with a gen 2 m4, aka a lancer tactical m4 gen 2.

[@TheRealDealAirsoft]

Tes

[@TheRealDealAirsoft]

Yes

[@Snake305airsoft]

Does it fits in a T6 ??

[@TheRealDealAirsoft]

It’s a hard no for KWA

[@wote2760]

are these compatible with krytacs and krytac midcaps? I heard that some maxx units are not initally compatible with krytac midcaps without doing modifications.

[@TheRealDealAirsoft]

Yes they will work you will need a 21 mm Maxx nozzle tho www.therealdealairsoft.com/search?q=maxx+&options%5Bprefix%5D=last

[@parky6031]

does anyone know if u remove the bb latch on the old models will it still feed?

[@jakegoombotz5432]

Just found out about real deal airsoft. Subbed for sure

[@hippo_3976]

best quality 1080p video i have ever seen. The camera makes it look like 4k. You answered almost all my questions. Waited like weeks for the Maxx ME to come back in stock, you said it was discontinued. thanks If you could answer my last question that would be awesome. My gun takes a 340mm inner barrel. I can only find a 6.05 “tight” bore barrel. I don’t know if this would be better than my stock barrel cuz if it’s bore. Should i get a good 6.01 or 6.02 a little big and cut it down?

[@TheRealDealAirsoft]

You don’t need to be exactly the same barrel length in reality if you get a 363mm that’s only 23 mm more 23 mm is .9 of an inch. One inch. Even with a tracer unit you will be good it won’t even effect the sensors. Get a 6.01 or a 6.02. We carry the hop unit on our website www.therealdealairsoft.com

[@hippo_3976]

@@TheRealDealAirsoft won’t it stick out of the gun more?

[@hippo_3976]

Shipping would be 30 USD. To much for my comfort. Any other very good hop ups you recommend

[@TheRealDealAirsoft]

@@hippo_3976 where are you seeing $30 shipping? That’s expensive

[@TheRealDealAirsoft]

@@hippo_3976 stock barrels do not run to the full length of the outer barrel

[@GetRealWithAsh1111]

Soo dope I’m gonna get my bf one of those for his gun ! He’ll love it

[@TheRealDealAirsoft]

Thank you so much !

[@LuhShmunky2]

W girlfriend

[@hippo_3976]

@@LuhShmunky2 fr

[@aymanrahman2332]

Completely unrelated,but which website do I go on to find a gf like you ,please drop the link ?

[@femz4952]

Anyone know if this will work with the n7 Milsim

[@cesarc.4228]

I have a Prometheus R hopped barrel on the way but it looks like the hop up windows on Prometheus barrels are pretty small. Any idea if the nubs supplied with this hop up unit will work fine? This is going to be my first build so I don't really know a whole lot about this stuff.

[@TheRealDealAirsoft]

Honestly it will be fine. It has a super wide range of comparability. Just use. A maple leaf bucking with it and your good we carry them in our website

[@DatAirsofttDude]

Great explanation

[@collinkelly4932]

Gotta have it bro.

[@TheRealDealAirsoft]

Shits fire man ! Shout out to Collin very cool dude !

[@Terminatorbart]

Nice redesign!

[@DankTank374]

Why are all of these so expensive tho !

[@fubene5495]

The Begadi neptune is still a better option, it comes with an adjustable feeding tube wich literally solves any feeding issues, ive tested it with 6 different magazine brands and it worked perfect with all of them, some needs to be adjusted a little bit, some not, but you will find the proper setup for any magazine brand. The begadi also comes with the posibility of adjusting the nozzle length by adding sims to the nozzle windw of the hop up unit. I wish the begadi chamber wings were like this new maxx model, looks like a really good way to maximize your accuracy by reducing tolerances.

[@ericevove]

Any one using this new hop up have fps drop. I have the old design and works perfect. I use the new one with a Mr hop up bucking and I have a 100fps loss.

[@TheRealDealAirsoft]

What nozzle are you using

[@ericevove]

@@TheRealDealAirsoft I am using stock air nozzle. I also tried my other m4 with a 21mm air nozzle and same thing. I did figure it out. I applied white Teflon tape around bucking and that created a better seal.for some reason there was air bypassing the hop up and bucking.

[@jacksonsmithe7503]

Wow I'm early

[@notimpressedbyyourm4932]

Ah yes the next gen of products that will fix the issues that didn’t exist with the previous generation

[@TheRealDealAirsoft]

Lmao it’s not about fixing problems it’s about offering a better product that’s mad funny tho

[@jpracingph]

Please do a Begadi Hop Unit review Out of Germany and looks to be better than Maxx

[@TheRealDealAirsoft]

I’ve been trying to get begadi products. Very difficult

[@OwenDieselFuel]

Nah brodie that’s a drop in auto sear take him down

[@Steve-sw4xt]

The new version is somehow more trash than the last versions honestly avoid these hop ups like the plague

[@zachchadwick8323]

This is the only video/review I can find on this hop up

[@aSirludvig]

I like this new "TOY" its definitely "NOT" a part for a "REAL" gun ;)

[@ironwell1324]

Very cool hop unit and chill out youtube.

[@TheRealDealAirsoft]

Lmao