Brand New Tool Box TOUR

[@Danny_Petramalo]

As a male it’s so therapeutic to watch a tool box tour 😅 such a amazing set up

[@TonyTheTechnician]

Haha isn't it though I feel the same way haha. Thank you 👍👍👍

[@truckeral23]

Very nice tool box , smart Tech that didn't get sucked into snap on .

[@tony-le4nz]

Congratulations. Not only for good tools but especially for good organization. Without my organized toolbox I would not be able to work. Thanks

[@TonyTheTechnician]

Absolutely agree. Thank you 👍

[@jimjohnson660]

If you ever need to tighten a bolt on the moon you could prolly just string all those extension together

[@TonyTheTechnician]

Lol very true

[@MidwestToolReview]

I have the SAE Makita impact socket set. The sockets work very well with tight tolerances on fasteners; no slop. However, the wobble extension supplied does crack when used with an impact gun. I used it on a Porter Cable impact fun and the chrome chipped and cracked. The sockets did not mushroom at the drive-end, so I considered that to be a plus.

[@TonyTheTechnician]

Midwest Tool Review haha ya I figured that adapter wouldn’t hold up to much. Thanks for sharing your experience

[@cadilakisrodcustom]

I love those plier holders

[@TonyTheTechnician]

Thanks I'll be doing a video on pliers organizers soon 👍

[@cadilakisrodcustom]

@@TonyTheTechnician I'll be tuned in

[@jefftovani5535]

Very,organized,every 10 years,or less,I'm buying a bigger tool box,because cars keep changing,so your always buying new and better tools,but a you already know,tools pay for themselves,over and over!!! Keep up the good work,I enjoy watching your videos!!! Thinking of showing my box tour,when I have time,it's a monster,,,lol

[@TonyTheTechnician]

jeff tovani haha thank you and yes I know what you mean. Also please let me know if you post the tour and I’ll watch it

[@BruceLyeg]

As clean and organized as I thought it would be. I think I pretty much knew what you had but didn't know how you had it in there. I'd be pretty happy to work outta that box with your tools. Goes to show that you don't have to spend a ton of money to have all the quality tools you need in a nice box. Thanks for the tour.

[@TonyTheTechnician]

Bruce L. Thank you that means a lot and I’m really glad you enjoyed 👍🏻👍🏻👍🏻

[@BruceLyeg]

I was gonna mention that I have the same low profile sockets. Even though they aren't impact rated, they're perfect to use with a stubby 3/8" impact gun. I use them with my AP Onyx and they go a lot of places you normally wouldn't be able to..

[@TonyTheTechnician]

Bruce L. Very nice. And great idea

[@jlapella]

Bruce L. Qqqqz👀😁😭😭😭😭😭😭😭😭😭👀c

[@KyleE-pm1nt]

I really appreciate you putting the links to everything mentioned in the video. Makes it easy for me to start shopping when I see something that I like.

[@TonyTheTechnician]

KE Builtit thank you. I’m really glad you find it helpful.

[@samjennings4594]

Just got my 52” husky box in last Friday. Slowly getting the organizers together to got the sockets and what not in the box. Looking forward to wrenching!

[@TonyTheTechnician]

Sam Jennings very nice. I hope you enjoy!!!

[@morganleblanc730]

nice organization and lots of money invested in tools

[@TonyTheTechnician]

Thank you!!!

[@lennyc624]

I really like the soft close drawers on your tool box. Nice video. I'm now motivated to organize mine.

[@TonyTheTechnician]

Lenny C thank you 👍🏻👍🏻👍🏻

[@kbbjedi]

Great update, like seeing how your box is evolving over time. Keeps getting better.

[@TonyTheTechnician]

kbbjedi thank you and I’m really glad you are enjoying. 👍🏻

[@bassjunkie4881]

I really like the Husky boxes I have the 46 inch extra deep box n it holds some tools but it's time to upgrade again

[@TonyTheTechnician]

Just 1 haha ya that tends to happen. Always need more space

[@realgambino1120]

You have come a long way Tony keep up the good work

[@TonyTheTechnician]

Thank you I appreciate it 👍

[@scottscopters7]

I think you made an excellent choice

[@TonyTheTechnician]

Thank you

[@toneloks7855]

Bad ass tool box.

[@TonyTheTechnician]

TONE LOKS thank you!

[@jonyoung6405]

Very nice set up! Thanks for sharing.

[@TonyTheTechnician]

Jon Young thank you for watching!

[@schoder78]

Fun box tour Tony, really enjoyed it.

[@TonyTheTechnician]

Emery chiszar thank you emery. Really glad to hear it

[@miguelmendez4718]

Great video. Thank for the tour. It looks like you’re all setup. The gearwrench 120xp long box end Wrench is an awesome set.

[@TonyTheTechnician]

miguel mendez thank you and yes they have been fantastic!!!

[@jonathonlaw5302]

What a brilliant set up you have I wish I had that just working on mine

[@TonyTheTechnician]

John Law thank you and I’m sure you figure out a great way to set yours up as well

[@kidrubicon]

This is a great demonstration to junior technicians on how to start the trade with quality tools rather than truck brand logos.

[@TonyTheTechnician]

Very true. Thanks for sharing your thoughts

[@Glock2269]

I’ve been looking at the Dewalt 52” tool chest combo. I seen this Husky at Home Depot today. Way cheaper and the build quality is much better. Husky it is!!

[@TonyTheTechnician]

Ya I was looking at that as well and the miwaukee box and I narrowed it down to the milwaukee and this husky box and I just preferred the layout of this box and I have been very pleased with the quality.

[@davidrestivo8598]

Organization tells a lot about a person and how well he will do his job. Good luck again....

[@TonyTheTechnician]

David Restivo thank you and I completely agree 👍🏻👍🏻👍🏻

[@davidrestivo8598]

Hey bro I hope everything is going well for you. Hopefully your a ring through school and will find a great job soon afterward. All the best buddy.

[@TonyTheTechnician]

David Restivo thank you!! I was top of the automotive program and got the don Schumacher racing internship. Soon after I was offered a job and now I’ve been working for them the last 2 months and living it

[@bryansenulis2975]

U have just as many tools as me yet I bought int hype and bought all off tool trucks. I spent 75k and u probably got 10k yet probably same quality....good job and nice collection...no bs

[@TonyTheTechnician]

Thank you I appreciate it. Glad you enjoyed and ya I know alot of people who have done the same. I'm just hoping to help others save some money if possible

[@cotygardner4033]

What kind of socket trays do you have for the torx/hex sockets. Can’t find any trays for those kind of sockets, and nice setup you have 👍🏻

[@TonyTheTechnician]

Thank you. Some are on my ernst rails and some on the harbor freight 1/4 rails. But the spacing isn't exactly perfect for them as you get into larger sizes they start to bump into each other

[@scatart]

I have the same box, and it is still 1 of my favorite toolboxs that i have.

[@TonyTheTechnician]

Carmen Allegrucci same here. Love this box

[@willfelipa5419]

Very nice tool storage set up so organized, 👍 I'm the same way in my garage and work. It's not easy to be organized and keep my tools clean everyday at work tho cause time is money but still managed to do so.

[@TonyTheTechnician]

Will Felipa thank you and I know exactly what you mean. At work it’s much more difficult. Don’t have as much time to keep things as clean and organized but I do my best

[@DlaMajsterkowicza]

Nice tour Tony

[@martinschaffmeir7729]

Hey Tony, hope you and yours are well. Looks like you've added somethings since last tool box post. Very good selection of tools. Hey take care sir

[@TonyTheTechnician]

Martin Schaffmeir thank you we are doing great. I hope your doing good as well. Thank you for watching and commenting 👍🏻👍🏻👍🏻

[@calebburnsred]

link for the triple square sockets? couldn’t find it on the description. thanks!

[@TonyTheTechnician]

amzn.to/3qGdBgT

[@calebburnsred]

@@TonyTheTechnician sweet, thanks!!

[@ChrisMYouTube]

Nice tour Tony! I enjoy watching some of your videos. Keep up the great work brother! 👍🏻🛠

[@TonyTheTechnician]

Chris M. Thank you I’m really glad you enjoy!!! 👍🏻

[@embyta]

OMG what a tool box. I am very jealous!

[@TonyTheTechnician]

Haha thank you 👍👍👍

[@betmon5986]

Once again awsome set brother

[@TonyTheTechnician]

Thank you 👍

[@davidyoung6608]

That was a awesome updated tool box tour Tony.

[@TonyTheTechnician]

David Young thank you dave. I’m glad you enjoyed 👍🏻👍🏻👍🏻

[@mrmoerder]

I’ve got the same box. I keep the majority of my sockets on the right upper deep drawer. I couldn’t keep them as low as you do, I use them too much

[@jimlahey7972]

that Makita impact set is actually pretty skookum I keep them in the truck box done everything I asked of em

[@TonyTheTechnician]

Jim Lahey very nice. Thank you for the input 👍🏻

[@jimlahey7972]

TonyTheTechnician no problem thanks for the ideas on how to store my tools in my box one of my home boxes it the husky 52"

[@cosmedic]

Yes wise choice of tools to do the job 👍🏽

[@TonyTheTechnician]

👍

[@mattmcmillan8920]

Lots of great stuff in that box Tony Great video as always And Happy Holidays to you and the family.

[@TonyTheTechnician]

matt mcmillan thank you! And happy holidays to you as well

[@favioescalon528]

This was an awesome tool box tour and i like your box a lot. I might even try to go find one at the store!

[@TonyTheTechnician]

Favio Escalon thank you and the box has been great to me. Thanks for watching and commenting

[@jamieredekop9158]

hey tony where did you get those socket holders?

[@TonyTheTechnician]

Jamie Redekop I got mine off of amazon. Ernst socket boss. But you can find them in some stores like northern tool

[@MidwestToolReview]

Would you be willing to sell the EZ Red wrenches since they’re not being used much since wining the Gearwrench set?

[@TonyTheTechnician]

Midwest Tool Review I have actually thought about it. It’s so had to decide though bc I love the reversible activity n and the locking feature but ya I just don’t use them as much anymore

[@MidwestToolReview]

TonyTheTechnician I totally understand, but if you’re willing to part with them, I’d be totally interested. I have a small set of older SK ratcheting double box end, but those sets would set me up right!!

[@TonyTheTechnician]

Midwest Tool Review ok cool. Thank you and if I do decide to see I will make sure you are the first to know

[@carboumen7661]

beautifull tool box, very tidy? and clean as well as good organized. saludos desde Spain

[@TonyTheTechnician]

Carboumen Carboumen thank you!!! 👍🏻👍🏻👍🏻

[@biophilic_inc]

Eh I got big tool box filled with brand new tools.. I warn you all...no one touches my tools man. Not even me 😎 Great stuff man !

[@TonyTheTechnician]

Hahaha thanks 👍

[@BB-jq6ek]

Just bought the EZ Red set...thank you

[@TonyTheTechnician]

BB88 oh nice. I hope you enjoy!! Thank you

[@jsddf8455]

Question. Where is you get your plier rail?

[@TonyTheTechnician]

I use a wire pliers rack and the tekton pliers rail. Check the tools link in any of my newer videos 👍

[@StevenSugref]

Awesome box you have there! You have every tool you could ever need! Are those Ernest socket rails? They look good

[@TonyTheTechnician]

S Fergus thank you and yes indeed those are the Ernst socket boss rails. 👍🏻👍🏻👍🏻

[@elserpiente]

Good stuff, Tony! Thank you for the great content, brother!!

[@TonyTheTechnician]

Drew Murphy thank you and I’m really glad you enjoyed 👍🏻

[@dannyc4419]

Great tour where do you get the foam tool holders looks great

[@TonyTheTechnician]

Thank you I just released an updated tour about 5 min ago if you want to check it out. Those little foam rails are from craftsman I believe. They are ok. Unless you mean the ones holding my ratchets then those came with my gearwrench ratchets. 👍

[@dannyc4419]

@@TonyTheTechnician going to view now thank you!!!

[@TonyTheTechnician]

@@dannyc4419 thanks 👍

[@woodworkerroyer8497]

Do you still think Craftsman pry bars are better than Tekton? I'm looking for some, but I dont know if craftsman is even worth buying now, what with the sellout. What about Pittsburgh? Just looking for some diy quality ones for VERY infrequent use on tool restorations. Thanks for the video, cool setup, I wish Harbor Freight had the matte black boxes!

[@TonyTheTechnician]

Craftsman and Tekton actually now have the same prybars. And since Craftsman is harder to warrant. I would by the 3 piece tekton set. It's all black with striking caps for 36 dollars. It's a great set!!

[@woodworkerroyer8497]

@@TonyTheTechnician Perfect, thanks!

[@jeffg2701]

I have this same box its great.

[@TonyTheTechnician]

Very nice!!!

[@granadojl]

How are you liking the Gearwrench roto ratchets? I picked up the 1/4 & 3/8 drive for $14 from Sears. So far I've only used them for a brake job in my garage and I was pretty pleased with them.

[@TonyTheTechnician]

granadojl I have been pleased with them as well. I don’t use them as much as I could. I’m just used to reaching for my other ratchets but the times I have used them. They have worked great

[@granadojl]

Same here. I have a few go to ratchets... My snap on flex head ratchets are amazing. I too scored them while a UTI student. I'm also have the same toolbox you have and I'm extremely stoked to have that too. Good to see another Vet use their benefits.

[@TonyTheTechnician]

granadojl ya it’s great getting those deals while you go to school and ya I love the box and the price for it lol. Glad you enjoy it too

[@granadojl]

I don't turn wrenches for a living though.. but already my box is packed. I simply turn wrenches on the side. Not as much money turning wrenches as there is typing on keyboards LOL. Yep. I.T. field is what pays the bills.

[@MrJobforacowboy00]

Good stuff! Quick question, why not keep the batteries in the tool? Looks like it would free up some space? Or will the lid not close if the batteries r in them?

[@TonyTheTechnician]

SNESJedi ya they are a little to big with the battery in them unless I put them in the back but then it’s a pain getting them out. Thank you

[@Assasain31]

Which left hand drill bits are those?

[@TonyTheTechnician]

Just some cheap ones I found online

[@willpower1177]

Can we hang a side box off of the husky? If so, is there a side box you'd recommend?

[@TonyTheTechnician]

INgunaddict I’m sure you could bc the box is pretty long and shouldn’t tip over but I have yet to see anyone do it so I’m sorry I don’t know what I would recommend as far as a side box

[@willpower1177]

TonyTheTechnician thanks man, I haven't found anything I like or anything from husky so I might just get the red harbor freight cart

[@TonyTheTechnician]

INgunaddict ya that is a good buy as well. Sorry I couldn’t have been more help

[@remichiasson3094]

What kind of wrench racks do you have in your full width drawer?

[@TonyTheTechnician]

Remi Chiasson they came with the Tekton wrenches I purchased buy I believe you can get them from Ernst and a couple other companies. Oemtools also has bright green and black ones.

[@remichiasson3094]

Ok. Thanks alot for leting me know

[@harrisonfroats4697]

Hey man great video. I was wondering what brand the under hood work light you have hanging from the box lid is.

[@TonyTheTechnician]

Harrison Froats luminary from harbor freight. Thank you!

[@johngibson3594]

Nice tour I'm sure it will change again they always do. Thanks for sharing merry X as to you and the fam.

[@TonyTheTechnician]

John Gibson thank you and ya I’m sure it will lol. Merry Xmas to you and yours as well. 👍🏻

[@adamwhitley6977]

Do you feel gear wrench and tekton are still worth it as they have gone up in price?

[@TonyTheTechnician]

Tekton for sure and gearwrench for the most part. But I believe you have to be more selective when it comes to some of the gearwrench stuff

[@trevorwallace2323]

very neat and organizated. and alot of gearwrench tools

[@TonyTheTechnician]

Trevor Wallace thank you 👍🏻👍🏻👍🏻

[@gannon0432]

Awesome video. I remember awhile back you got a Lang ratcheting caliper compressor. You used it any and like it? Thinking about getting one myself.

[@TonyTheTechnician]

Gannon Gibson yes I kept that in my work box it has been great. So much faster and easier to use.

[@georgebrown943]

Man you must be good all the tools are still new? .

[@TonyTheTechnician]

Well at this time I was on college and just started buying all these tools and just started my project car so all the tools at most were a year old. But I still take very good care of my tools. If I'm going to spend this much money on something I'm going to take care of it

[@marlinamona9883]

Nice tools

[@TonyTheTechnician]

Thank you

[@shawnlathrop852]

Great video and nice box. Anyone would be proud of it. Not to be negative but you only need about half of whats in there. You have double or tripple of multiple tools. Where do you keep all your air tools?

[@TonyTheTechnician]

Shawn Lathrop thank you. I keep all of my air tools in my work box.

[@walter2670]

Do you prefer the gearwrench screwdriver set of the Tekton? Any particular reason if so?

[@TonyTheTechnician]

Walter Welch hmmm no w that is a good question. Truthfully I really like them both. Both really good sets and really good prices.

[@walter2670]

TonyTheTechnician I have the Tekton set which I really like. The gearwrench are well priced was thinking of trying them out. Expanding the hoard

[@TonyTheTechnician]

Walter Welch haha ya I can understand that. Ya I have really enjoyed both sets.

[@alanedwards3832]

How well do the moisture packets work in your box

[@TonyTheTechnician]

Alan Edwards they seem to work pretty good. I always replace them any time I get new ones with packages just to make sure they keep doing the best they can.

[@alanedwards3832]

Thank you Tony

[@TonyTheTechnician]

Alan Edwards no problem 👍🏻

[@dannyc4419]

How is the box today do you still like the box?

[@TonyTheTechnician]

Still have it and love it. That little trim piece is the only thing I have ever had an issue with and that's an easy fix

[@dannyc4419]

@@TonyTheTechnician thank you

[@trentonmeyer8633]

How deep r these drawers

[@TonyTheTechnician]

Here is the link for the indepth review and info on this box. kzbin.info/www/bejne/bmK8oWufhsmUfpY

[@patrickkinderman225]

Where can I find that grip hammer set?

[@patrickkinderman225]

Also, what’s the part number on the launch code reader? Great tour man!

[@TonyTheTechnician]

@@patrickkinderman225 grip hammer set is no longer sold as a set. Just individual hammers now. And that code reader is the millennium 90. Thank you

[@patrickkinderman225]

TonyTheTechnician thanks for the quick reply, keep up the good work man!

[@TonyTheTechnician]

@@patrickkinderman225 thank you!

[@RUBV]

how did you mount the led light?

[@TonyTheTechnician]

It has magnets on it

[@josephlawrence6873]

Great set up... I think you have more screwdriver's than I have wrenches...lol

[@TonyTheTechnician]

Lol 👍

[@rafaelpinzon7191]

Great video bud. Hey does this tool set is for your garage or do you work of it. Im working my tool set for my tool chest besides the tool set I have in my car, and I'm doing my research for which tool I must have in tool chest for doing the basics maintenance routine of 10, 20, 30k km and that kind of stufx. Any suggestions?

[@MrJonny247]

Awesome! Good luck from siberia! 👍👍👍😄

[@TonyTheTechnician]

MrJonny247 thank you!! 👍🏻

[@danasoucier9828]

What brand is the plier rack?

[@TonyTheTechnician]

Dana Soucier not sure on the brand I just searched pliers rack on eBay and found it

[@klasykapolskiegohh8798]

Nice box but do you even youse your tools? Seem to clean to be ever used

[@TonyTheTechnician]

klasyka polskiegoHH thank you and yes I do. That’s how I have rebuilt my 85 Camaro and maintain my Malibu and my wife’s spectra. Other then that. These tools were meant to go to my job but my job provides me with all the tools I need already. So these are only used at home

[@robertherrera419]

Fun to watch as always, Tony. 😊 I may have just missed it but what happened to the smaller red box that was on the small fridge?

[@TonyTheTechnician]

Robert Herrera thank you!! I still have the bottom cabinet but I sold the top portion.

[@4020jc]

been away for a little while always enjoy your vids tony

[@TonyTheTechnician]

4020jc thank you. I’m really glad to hear it!!! 👍🏻

[@graysgarage2142]

Tony where have you been man ?

[@TonyTheTechnician]

Busting Knuckles hey. Just been moving to Indiana and getting settled in and working. Slowly gettin everything ready to start making more videos.

[@graysgarage2142]

TonyTheTechnician great man I can’t wait I changed my name for my channel and have uploaded more videos and have big things planned for the future man.

[@TonyTheTechnician]

Busting Knuckles very nice. Look forward to seeing them!!

[@张-k3j]

Very cool

[@TonyTheTechnician]

张临上 张 thank you!!!

[@张-k3j]

Yes your tool cabinet， And all your tools

[@Petrol360]

Great video, kinda have me wondering if I need to go Gearwrench or Tekton.

[@TonyTheTechnician]

Petrol360 they are both great for the price. All depends on what your looking at buying. Thank you.

[@AP-oj7fl]

craftmans pry bars FTW!

[@TonyTheTechnician]

An Phu haha ya they really are a great deal

[@cctvspystore]

The only suggestion i've got for your toolbox is adding a set of knipex plier wrenches otherwise you've got a pretty thorough set up

[@TonyTheTechnician]

Mad Hatter ya I have been looking at those for the past couple months. Just waiting to find a good deal on them. Thank you for the suggestion and for watching

[@cctvspystore]

Tony, honestly you're not gonna find a better deal all year long than ChadsToolBox.com...js

[@TonyTheTechnician]

Mad Hatter very cool. Thank you

[@mindiseverything5036]

Going to get this box but only the bottom piece until I get MO money

[@TonyTheTechnician]

Free Spirit ya it’s a great box for the money and ya it’s nice being able to buy it in two seperate pieces of needed

[@johnisasexyname]

Where do you get oem tools?

[@TonyTheTechnician]

johnisasexyname mainly amazon or the oemtools catalog

[@johnisasexyname]

TonyTheTechnician oh okay thanks

[@张-k3j]

Do you have the purchase URL for the tool?

[@TonyTheTechnician]

张临上 张 which tool??? I have a bunch of the links posted in the description

[@SirKicksALot25]

the tool setup is sick.... but nothing looks like its used lol

[@TonyTheTechnician]

Thank you and ya this was about 3 years ago when I was buying alot of new tools I wish they still looked like this. They aren't terrible but nothing like this lol

[@whoismiked]

Just found your channel, love your content! Where did you get your socket organizers?

[@TonyTheTechnician]

whoismiked thank you. I’m glad you enjoy!! They are Ernst socket boss rails. You can get them on amazon, eBay, jegs, northern tool and equipment

[@aldaydaniel13]

Does anyone know the part # on the toolbox?

[@Mattman9826]

How do you like your Carlyle stuff? I have Cornwell ratcheting wrenches and they're kind of garbage, I've been thinking of selling them (or trading them for truck credit) and buying the 6 point Carlyle ratcheting wrenches

[@TonyTheTechnician]

Matthew Collins I have been really happy with my Carlyle items. Don’t own a lot but from what I do own. They work great

[@harleyadam4813]

How is your tool box tour video not 2 hours long by now?! HAHAHA! Joking!!! Great video as always, Tony!

[@TonyTheTechnician]

Harley Adam lmao my first ones I ever made almost were that long. 😂 I tried to hurry through it

[@asmautollc]

Alright, got my 🍿🍿. You bucked the trend. Instead of buying an Epic, you reorganized your Husky. Awesome job organizing. Looks great. Surprised you put the 20mm GearWrench in the tray and left the 21mm in the roll. If you use that low profile socket set once, it’ll be worth it.

[@TonyTheTechnician]

asm154 1 haha thanks!!! Ya I’m thinking of putting the 6mm back in the bag and moving everything down 1. Bc I know for a fact I’ll use the 21 a lot more then a 6 lol

[@asmautollc]

TonyTheTechnician true. A 6mm is for stirring drinks and a 20mm is a paper weight.

[@TonyTheTechnician]

asm154 1 lmao very good idea. A new stir stick

[@asmautollc]

TonyTheTechnician do you use the 20mm combo on your Camaro? Didn’t realize how common 20mm is on GM fuel filter and some other line fittings.

[@TonyTheTechnician]

asm154 1 umm not that I can remember but I have done so many different jobs on the Camaro. Fuel filter is actually one of the next things to be done. I’ll let you know

[@markquinlan6406]

Hey I have one more question about tekton tools if I set up a free account and I order something do they ship it to me and cover the shipping or do I have to pay the shipping

[@TonyTheTechnician]

Shipping is free 👍👍👍

[@danielmeyers4383]

Hey Tony! Great video! Where did you get those tin snips with the removable head? Or where would I go about getting those? They look super handy to have around!

[@TonyTheTechnician]

daniel meyers I’m not exactly sure. I actually received them from another subscriber

[@markquinlan6406]

Damn Tony how do you keep them tool and impact wrnches so spotless clean?

[@TonyTheTechnician]

Since just used at home I just wipe them with wd40 after every use. My work tools are another story lol

[@Ray-uv4sk]

Nice tour man...

[@TonyTheTechnician]

Tiray Newkirk thank you!

[@willkrawczynski7745]

At 2:59, it’s a tool box not a hardware box that is what I think with mine. It gives me more space.

[@joshuahoover5791]

You should try Adams polishes for your cars😉

[@TonyTheTechnician]

Joshua Hoover nice. I’ll check it out

[@joshuahoover5791]

They have a KZbin channel to look at there products 😁

[@markpaul7887]

Do you and most of your viewers work on cars? Any diesel , offshore...?

[@TonyTheTechnician]

Mark Paul yes most of us are mechanics technicians or weekend warriors. I myself do not really work on big diesels. I work on some smaller diesels but mainly your everyday gasoline automobile

[@markpaul7887]

+TonyTheTechnician oh OK. In the past I worked on Aircraft briefly but didn't have my A&P license. I was supposed to be working at the same place as OJT but that part never happened. That might have actually been best. I did receive free schooling. And I am also a member of the S.E.P program through Snap-on. I encourage all techs to take advantage of the S.E.P program. Its financially worth it even if you have to pay for a semester if you want to buy Snap-on. Also the aviation industry is about to explode. Timing is perfect

[@TonyTheTechnician]

Mark Paul ya the sep program is great. It will save you a lot of money!!!

[@NaztyNapkinz]

No channellock pliers?

[@TonyTheTechnician]

Johnny G unfortunately no. I have basically everything but channel lock. But I do like channel lock

[@NaztyNapkinz]

fair enough sir. I bought a blue point microscan 3 today. Might do a review when I get it.

[@NaztyNapkinz]

Do you like the gearwrench non ratcheting wrenches? Thinking about getting the 44 pc

[@TonyTheTechnician]

Johnny G thanks and yes I do. I like them as well. They have a nice anti slip feature in the open end and hold up well

[@NaztyNapkinz]

bought the tekton set, instead of gearwrench non ratcheting. I think I made the right choice, I don't see how these tekton's can be beat with quality.