Brick Wall Pattern Cutting Board

[@KingsFineWoodworking]

Very good video presentation, and excellent end-grain cutting board!

[@brandonthebuildertx]

Thank you!

[@kannusamyrajagopal4386]

@@brandonthebuildertx a

[@jackhealy8467]

Brandon, I built this board from your video about 2 years ago and it turned out great. About to build my second! Thank you!!!

[@brandonthebuildertx]

I'm glad you found it helpful!

[@jhgoytia]

Was looking for something in the comments and went all the way to the beginning. Wow was this video trolled. So much so I forgot what I was looking for to begin with. But some people are laughable. Great work.

[@MyClutteredGarage]

Beautiful. Great idea for those of us who don’t own a planer!

[@amethystwhite5803]

If I had know this I wouldn’t have bought a planer.

[@estebangutierrez9941]

Excuse me what is the name of that tool

[@brandonthebuildertx]

@@estebangutierrez9941 Which tool?

[@TheTejasfilm]

@@estebangutierrez9941 He's using a router and a routing sled. For stuff like this it'll work great, I've used the same method to flatten tree stumps before.

[@JR-gc8el]

I like the idea of using the router like a planer! 👍

[@РумянцевВячеслав-д6ю]

Не понимаю(( за что дизлайки) просто приятно посмотреть на красивые, оригинальные вещи) понятно, что это не каждо у доступно иметь площадь для этого и столько инструмента) так это другое дело)

[@elboogie2324]

Great job. I want to do something like this when I get the equipment for it.

[@markkish4586]

Excellent planing jig

[@brianlipsett4837]

Cookie sheet genius. Thank you

Echt gute arbeit , gefällt mir sehr gut...

[@vickiehadd4324]

BEAUTIFUL!! LOVE THIS!!

[@ronkropf3280]

Wow! That is totally Epic 👌

[@joedelasko7877]

This cutting board gives me astigmatism

[@Toxic-ng2fg]

Hey man I was thinking of building this design aswell then I stumbled across your video when you look at the finished shopping board from a birds eye veiw like as you're about to cut something what are the measurements of the brick and mortar?

[@jaygriesser5009]

Please tell me the L W H of hard maple and walnut, please.

[@oldmanfromscenetwentyfour8164]

No crappy music, no incessant babbling, no annoying wives/girlfriends, kids or pets. Good job all around, nice board.

[@MrLeeVJ]

Wow ~ 장인이 만들면 예술품이 됩니다!🇰🇷💕👍 Wow~ Artifacts are made by artisans!🇰🇷💕👍

[@jhgoytia]

Oh yea, strip dimensions? Just curious to make a ratio.

[@jmarcant616]

Do you have the measurements to make this? Pretty cool looking

[@RhettIs1]

I used this video to make one of my own, ty! I learned a lot. Fun project

[@brandonthebuildertx]

I'm glad it helped!

[@mosesbro7]

Awesome job! New challenge: 45° herringbone pattern with contrasting perimeter

[@GianbrunoPirona]

Che talento ! Bravo

[@1963johnbhoy]

I am going to make one of these for my mate he is a huge Pink Floyd fan.

[@0cean.Sun.]

👏👏Esta precioso. Mucho trabajó.

[@lagoonrd4173]

Nice work.... and no goofy music too. 👍🏽👍🏽👍🏽

[@carmenarroyo4060]

Love your job wish you gave the dimension on the cutting board

[@Northeast_Mainiac]

Nice Job

[@leonardopinto5324]

Trabalho incrível, parabéns. Saudações aqui do Brasil.

[@cava1962]

master piece very good job......

[@PawPawsClan]

Very Nice! 1- Thanks for the tip on the router bit, I'm gonna buy one and try it out. and 2- Every cutting board i've ever made contained Walnut and then a variety of other species. Again, very nice

[@brandonthebuildertx]

Thanks!

[@eduardojoachim27]

What kind of flattening bit did you use? How many flutes? Thanks

[@brandonthebuildertx]

I use this one: geni.us/0ibEA25

[@morphinenjoyer51]

Hoe big did you cut your second strips, the ones with the bit of dark walnut in

[@cvan5]

Строгание фрезером -это конечно круто.

[@Grumplefut]

Black font with white border can be seen on any color, would make it much easier to read

[@hamidofficiel5431]

So wondfeaul and Beautifaul work. Iliik it 👍💯❤

[@calimurat]

can I learn the both wood material? which tree are you using for this?

[@martinreyes6984]

Wow ! It is prefectly made !

[@brandonthebuildertx]

Thanks!

[@roofermarc1]

Very nice job. Only thing is brick layers don't line up the joints anymore let alone stager them correctly. They do a horrible job you do a perfect job. Thanks

[@Dil_Dil_804]

I took some pictures from your video and went out and showed the shop 🏬 owner he also makes wood 🪵 stuff 🚪🪑🪟🪞but he refused saying it is very difficult not working always.He said it is very difficult, we cannot do such a thing. ☹️

[@nikko4881]

Nice video!! May i know what was that liquid you we’re putting?

[@claudiomessiasgessoclaudio3128]

Muito bom Obra de. Arte sussesso amigos.

[@mikec9636]

Excellent work!

[@rjuk8817]

Brilliant 👏

[@mistersloppy]

has anyone mentioned the Rent-A Spouse ad in the newspaper around 2:05??

[@brandonthebuildertx]

Haha. Catchy name for a handyman service.

[@brandonpayne5000]

I just started and was wondering where to find those find types of wood? Big box stores don't really carry anything like that

[@brandonthebuildertx]

Search your area for a hardwood supplier. I'm in the Houston TX area, and buy my lumber from Houston Hardwoods.

[@ChadPalmer]

Great Video. Love how your daughter came in :).

[@alexandremassenagracioli6814]

Sensacional. Excelente trabalho. Parabéns.

[@michaelpelletier4094]

Merci du partage!!

[@yada3160]

Thank you

[@barryparks8055]

Looks Great

[@brandonthebuildertx]

Thanks!

[@johfi]

Do you have thoughts on spraying the board with water after your initial sanding to raise the grain? Then sanding again to get the fuzzies off? And then applying your final coats of oil....

[@brandonthebuildertx]

Thats what I do. I didn't film that part in this video, but I've showed it in the more recent ones.

[@tonycurtis6457]

Excellent work. What routing bit size and type did you use to do the flattening? You made very quick work of flattening it.

[@rbspcd]

Awesome!!

[@taylorreess435]

what type of wood is that?Exellent job.

[@brandonthebuildertx]

Walnut and hard maple.

[@i8d0m8a2]

What is the finish?

[@brandonthebuildertx]

Mineral oil.

[@steveb7094]

Great job. I might just try my hand at this, now that I suddenly seem to have a lot of free time on my hands. Oh, and thanks for not adding an overly loud disco techno party soundtrack and making a huge mess out of it. I've never understood why that's a thing.

[@bhutch216]

What are the dimensions of the boards before gluing?

[@Dumbc0mment]

Nice work 👍. I prefer it without the fillet 😅

[@perciesucuytana3420]

Genial gracias por compartir.Saludos de Lima Perú.

[@Tim_extreme]

Which mill did you use for milling cutter? 3.33sec

[@brandonthebuildertx]

I use a Whiteside 6220.

[@Tim_extreme]

Brandon Hartman - Woodworking ok, thanks man!

[@mikszekely1224]

Great build, very geometricly satisfing!! Well done sir

[@maladinjeanluc7783]

Très beau travail 👍

[@GeometricMason]

Just curious... did you plane it with a router because you don't have a regular planer, or because the router is better for some reason? Similar question for sanding... orbit sander better than a drum sander or do you not have a drum sander?

[@brandonthebuildertx]

I have a planer, but you don't want to run an end grain board through it because there's a risk of it blowing apart (damaging the board, planer, or both). There are ways to lower the risk, (gluing on support boards, super shallow passes, helical cutterhead) but doing it with a router sled is much safer for both the board and the board builder.

[@ereis759]

Splendid, magnificent !!!

[@jorgeluismonteromejia5006]

Precio cuanto cuesta algo así

[@tony5535]

Very nice, thanks for sharing.

[@brandonthebuildertx]

Thanks for watching!

[@tony5535]

Anytime and sub'd!

[@Mario7p]

mineral oil and glue? Is that even safe for a cutting table or will that get into the food?

[@brandonthebuildertx]

Perfectly safe. The glue is rated food safe and the mineral oil is for human ingestion. Many tens of thousands of boards are made this way every year.

[@notasleanstillasmean3593]

@@brandonthebuildertx thanks for the helpful answer 👍

[@Raybso247]

What type of router bit do you use to make the recess at the end

[@brandonthebuildertx]

It's a 1/2" core box bit.

[@Raybso247]

Brandon Hartman - Woodworking thanks!

[@doubledp72]

What kind of oil is that?

[@brandonthebuildertx]

Mineral oil.

[@SS-fw6bl]

Mind blowing

[@voltaireorlina]

Beautiful!!!

[@vladimirprokhorov5089]

Great work! What are the original dimensions of the blanks?

[@hiteshkhorjuvekar2205]

Good . Liquid name plz

[@brandonthebuildertx]

Food grade mineral oil.

[@faithwoodworking3671]

Nice work

[@brandonthebuildertx]

Thanks!

[@balak2992]

Nice work. Is that some special food grade glue?

[@brandonthebuildertx]

This board was made with Titebond 3. It's rated food safe, as is Titebind 2 which I use more often now.

[@balak2992]

@@brandonthebuildertx great, thank you !

[@MrHdyw]

What kinda but did you use for your router to plane the top?

[@brandonthebuildertx]

I use this one geni.us/0ibEA25

[@paparuncha6089]

What liquid?

[@brandonthebuildertx]

It's finished in food grade mineral oil.

[@SGuilarducci]

Trabalho lindo 👍🏻👏🏻👏🏻👏🏻

[@TheBlackicehunter]

Normal wood glue? any chance of the glue damaging food? thanks

[@brandonthebuildertx]

I used Titebond 3 on this one, but mostly use Titebond 2 now. Both are rated safe for food contact once they're cured.

[@TheBlackicehunter]

@@brandonthebuildertx many thanks

[@chippie2493]

Lovely work, made even better if you'd sanded the burn marks out of the finger grips

[@brandonthebuildertx]

I did to the extent I had the ability at the time.

[@madhumonikalita1522]

what is being put in betweeen two pieces of wood?

[@brandonthebuildertx]

At what part?

[@brandonthebuildertx]

@NooMax4ever Could be I suppose. If that's the case, Titebond 3 wood glue, haha.

[@qldu13780]

Very good idea 👌

[@castlegrand]

I am curious. What part of the Houston Clear Lake area is your shop? I recognized the contractor section of the local Citizen newspaper.

[@brandonthebuildertx]

North of Clear Lake near the bay.

[@azizammarizoui]

عمل رائع فكرة الروتر مفيدة

[@normolson1]

Perfect

[@DIYMinded]

Great video. Thanks. Subscribed!

[@lauraalpuin8331]

Envía a distintos países

[@junkuifu9827]

its cool

[@thewoodshop69]

I think you forgot something the Super loud music thanks and I appreciate it nice board by the way

[@brandonthebuildertx]

Thanks! I'm more a fan of letting the tools make the music.

[@Crazyknives]

Brandon Hartman - Woodworking there you go, the way should be 👍

[@gilbertoortiz4941]

What name is of the dark wood

[@brandonthebuildertx]

Walnut.

[@carlostarraza2538]

Next time clean and sand out the burnt marks on the finger grips before you put the mineral oil on it. Believe me I forgot on one of my cutting boards and lost the sell because of that burnt mark!

[@adrianosilvaicapui620]

Show, Send this board to me here in Brazil.

[@jeffspencer6943]

Great work, you might want to look into using Coconut Oil for your boards...

[@montyopsal594]

coconut oil is NOT recommended! can go rancid

[@dpk9993]

Nice work! The mineral oil added at the end must be food grade mineral oil.

[@brandonthebuildertx]

Yeah. This stuff is from walmart.

[@wirphawirpha9597]

Cakep, ntar ane belajar ama nte

[@celiocelio5270]

Fala pra mim que produto e este que vc esta pagando

[@brandonthebuildertx]

Unfortunately I don't speak any Portuguese, and Google translate isn't helping me understand it.

[@haaek2600]

Thinks

[@asianwoodart9581]

Excellent work :smile:

[@mymovies2388]

Which mineral oil you used???

[@brandonthebuildertx]

Any food safe mineral oil will work. This particular stuff came from the local Walmart.

[@haoranlenomade1442]

Bravooo 😀