Branson 2515H with the BXpanded Piranha Toothbar

[@Rapid454ss]

I put one of these on my JD 125R 10 years ago. One of the best things I did for my tractor. Also bought a manual thumb for the backhoe from BXpanded. Their products are exceptional! Well worth the investment!

[@Rapid454ss]

My mistake: Tractor is a JD 1026R Subcompact!

[@nitintaskar5344]

@@Rapid454ss a Ka jkkkkkà v7u6drytyyyuyuu"577. Kpp

[@douglasbest8136]

I enjoy my piranha toothbar! It looks like you also demonstrated how you can dig a ditch or small swale.

[@kylefamilyhomestead7007]

It’s a great tool. Thank you for watching

[@TheRaulr151]

I have a 3015h and I love it. That tool works great!!

[@kylefamilyhomestead7007]

Thank you for watching

[@CountryLivingWithTheHarnishs]

Looks like a nice product, thanks for sharing .I will have to buy one for my L2501

[@kylefamilyhomestead7007]

I think you will like it. Thanks for watching!

[@mybranson9027]

Nice looking tractor!

[@hunterlogan2913]

Good demo!!

[@kylefamilyhomestead7007]

Thanks for watching

[@pmaint1]

I can certainly understand your enthusiasm and I'm sure that piranha blade can do much more than that. However I could've dug that POS scrub pine out with a shovel and done a lot less damage to the ground in about the same amount of time.

[@kylefamilyhomestead7007]

Lol I’m sure you could have. Thanks for watching.

[@hunterlogan2913]

lol...

[@ctraltdel6510]

Looks like itd be a little better but not a whole lot. Thats why im on the fence about getting one. I think just getting a purpose made stump bucket/trench bucket would be the money worth spent. Youd think youd have an extra 20hp with a stump bucket.

[@darrellfincher2948]

Sandy soil lots easier to dig than our soil here in northern Georgia

[@oldstruck1964]

Nice video. Thanks.

[@kylefamilyhomestead7007]

Thanks for watching

[@StephenMcClain-y4v]

Good evening from Alabama.. I have a 2515H with the same bucket and all. What measure tooth bar did you order? Looking forward to getting one for my tractor.

[@kylefamilyhomestead7007]

It unfortunately wouldn’t matter because most buckets are off in measure from one to another. It’s so long I don’t remember. I’d definitely advise to measure and not go off someone else. Thanks for watching sir!

[@tennesseetrucker1921]

Awesome addition to the Tractor. I just picked up a 2515H myself last week. Put 17 hours on it bush hogging over labor day weekend. I have an area about 300’ by 200’ i need to do some grading on to build a parking lot for my semi trucks. Reckon this tooth bar would help, or should I just call in a dozer? God bless

[@kylefamilyhomestead7007]

I think you will be highly impressed with the tooth bar and what it adds to the loader. These guys need to put me on the payroll lol.

[@witness1449]

I have a 2515H also and ordered mine about a month ago. I have been digging a small watering pond for deer with the bucket and now down into clay. Can't wait to get the new blade. How are you liking the Branson 2515H ? I love mine, I also work part time for our local Branson dealership. Nice video of the new cutting edge in action.

[@kylefamilyhomestead7007]

Love it so far! I only have 60 hours in the seat so I’m still a newb lol. You will love that blade! Thanks a ton for watching our video. Mike

[@witness1449]

@@kylefamilyhomestead7007 I've only had mine 3 weeks and have over 40 hrs on it. Hoping to get the new cutting edge soon. Everyone seems to really like those amazing cutting edges. Thanks Bob

[@ProjectsWithPaul]

Toothbar? That thing will dig now! Looking good.

[@kylefamilyhomestead7007]

Whoops gotta change that lol. That’s for the heads up Paul! :) Not sure why the hell I kept saying tool bar. I’m an idiot lol.

[@ProjectsWithPaul]

@@kylefamilyhomestead7007 Its fine, everyone knows what you mean.

[@Backcountrysportsmen]

Well technically it is a tool bar so that works just as good lol.

[@adammore2653]

Not understanding why you got so high that you dug up both sides, and then finally dug the tree up. Good vid.

[@kylefamilyhomestead7007]

I’m not understanding your question.

[@gordoncornelios7613]

What type of tractor you’re using?

[@nz918n]

I am considering a Piranha bar for my Branson 3515H. Just wondering if the embossed bead on the side of the bucket interferes with the attachment bolts. My bucket is wider but I would assume the sides would be the same or very similar.

[@kylefamilyhomestead7007]

It didn’t interfere at all with my bar. Super easy to install.

[@nz918n]

Thanks, I ordered mine this morning. Looking forward to many hours of fighting back the wild raspberries.

[@kylefamilyhomestead7007]

@@nz918n awesome!

[@Bamaoutdoors]

Where did you buy your Branson from? I'm looking at getting one sometime? I live close to Dixie Horse and mule which is a dealer.

[@kylefamilyhomestead7007]

Conner tractor. It’s a small independent dealer just outside Ocala FL. Go bigger then you think you need. It’s my only regret so far.

[@charliesmith9528]

I am about to buy a 2515 instead of a smaller branson so i can have the beffier frame and hp to push brush and stumps,,,any suggestions about the 2515 before i buy,,just curious what yours cost,prices around me are all over the place in sc,,i can buy one from maine 2500 less than home

[@kylefamilyhomestead7007]

Cost is definitely a factor but I’d hone in more on the dealer. Make sure they have been in business a while, have a good record and only deal in tractors. Do they have there own service dept etc. the dealer that has all that vs a dealer who doesn’t isn’t worth an extra grand or so. I bad dealer can really be the pits when you have warranty issues. Thanks for watching.

[@charliesmith9528]

@@kylefamilyhomestead7007 I agree,,i always deal locally ebven it cost a little more,,whats strange is some dealers that are 500 miles away offer packages 2-3 k less ..have never bought a tractor and im 65 so im a little lost..i do hoever know how much bullshit dealerships try to add on when you buy a car,seeing same deal with tractor dealers,,especially john deere,,thanks for info.,stay safe and pray for our country,,i fear we are very close to a total revolt..people are tired of being lied to regardless of party

[@kylefamilyhomestead7007]

@@charliesmith9528 yes sir stay safe and let me know what you buy.

[@marccocke9924]

What size did you order for your bucket?

[@kylefamilyhomestead7007]

Hi Marc! I honestly can’t remember because it took almost 10 weeks to get to me. I will Tell you when I called to ask questions they would not take the answer of me saying it’s just a 48” bucket. Apparently every bucket has its nuances in sizing. You will def have to measure the way they show on the website. You won’t be disappointed! Mike

[@TheRonald6524]

How much did the tool bar coast $$$$

[@kylefamilyhomestead7007]

Just under $300.

[@charlesyounger1521]

How much

[@kylefamilyhomestead7007]

$300

[@davidgroff4304]

Just drive into base of tree and pop it out

[@kylefamilyhomestead7007]

Thanks for watching

[@ARCSSelfDefense]

tool bar....tool bar....tool bar.....

[@kylefamilyhomestead7007]

Thanks for watching

[@williammitchell9604]

You could have saved fuel and time by just pushing that small tree down without digging at all. But, I think you were just showing how the tooth bar will dig, rather than taking down trees.

[@kylefamilyhomestead7007]

You are a Genius William. Thanks for sharing.