BX Expanded Piranha Tooth Bar Review

In this video we review the BX Expanded Piranha Tooth Bar. The BX Expanded Piranha Tooth Bar is a cutting edge designed to fit on tractor loader buckets to add functionality.
My Favorite Tractor Accessory: amzn.to/3Tnb1xq
The BX Expanded Piranha Tooth Bar is a bolt on cutting edge that allows you to cut through and remove brush and small trees. It also provides a sharper cutting edge for digging into dirt with your tractor bucket.
The BX Expanded Piranha Tooth Bar bolts on to your existing tractor bucket. To Install the BX Expanded Piranha Toothbar you need to measure your bucket and then order at BX Expanded Piranha Tooth Bar that is 1/4" smaller than the measured dimension.
Using a step drill bit you drill one hole on each end of the bucket with the provided templates. You then mount the BX Expanded Piranha Tooth Bar with 2 bolts. The Piranha Tooth Bar has a serrated tapered cutting edge which can be used to dig or cut.
In this video we used the Piranha Tooth Bar on a TYM 2515H tractor. The bucket width was 62" and we ordered the Piranha Tooth Bar to be 61.75"
*Links included may be affiliate links which help support this channel.

[@ellobo1326]

I purchased one for my little Yanmar SA 325. It’s incredible. Game changer and best money one could spend on their tractor.

[@yoloreviews]

100% it is. It's incredible what it can do do make the loader more useful.

[@ryanmorrissey4439]

This is the content I’m here for

[@yoloreviews]

Right on!

[@BigCarmine]

Tractor manufacturers should offer a product like this themselves. Put one on my new MF GC1725M....it's never coming off.

[@yoloreviews]

100% Agreed. They are my favorite upgrade to the tractor. The buckets should come from the factory like this. It's so much more useable with the Toothbar.

[@archcitygarage]

Really cool, only 2 bolts too.

[@chrischoin7402]

About time there's some decent footage and a review. Any advice on measuring? My bucket inside about 3" up and 5" inches in is measuring between 70 3/4 to 70.5 Should i go with the tight measurement or shorter one.

[@yoloreviews]

I measured the exact distance between the sides and ordered a 1/4" smaller it worked perfect. The bolts will suck in the bucket sides/blade just a little bit and 1/4" smaller than the actual measurement was perfect.

[@BillyBlaze7]

why does that ground have cellulite tho?