Breaking in Husqvarna 562xp mark11, first real cuts

[@timothyfultz760]

I miss the old vintage McCullouch Buckin. Love you all, get the gullet

[@Maxwell-j9z]

Wow that saw is impressive! I started my power saw journey with a little home depot echo 35cc, learned how use a saw and sharpen chains with that one, gave that one too a buddy for his first saw, then I got the echo timberwolf, did a muffler mod and loved that one, beat the crap outta it and never had a issue with it ,sold it and now I run a 362 stihl and love it. But now after watching your videos, I'm thinking of trying out a husqvarna In the 70cc range. I think a 372 xp is calling my name! Stand up and buck! Great videos buckin!

[@michaelwhiteoldtimer7648]

I think the 372 is one of the best saws ever made

[@Rob-tl9md]

find an oe 372 if you buy one. Not a fan of xtorq.

[@austindenotter19]

Cut to the chase and get a husky 592😂

[@k3vvv508]

@@michaelwhiteoldtimer7648 i recently bought an 272, thats an really awesome saw too

[@TheDennys21]

Hell yeah brother, the 365 and 372 are based on saws from the 90's so you know they are though as old boots and will last you a lifetime.

[@kylestaffieri394]

I have a 562xp great saw I put a pipe on my 562xp and noticed a big difference definitely helps that saw a lot

[@gwin7782]

Good to see you in the wood with a saws again. Keep healing and don’t push it.

[@prague7706]

Got my first ever chainsaw this last weekend and learned a bunch from this. I had the exact situation where a fallen tree was flat in the dirt and I wasn’t sure of my approach. Now I know what to do.

[@jerrysmith9935]

Buckin when I started watching your video's I was learning how to sharing a chain what you just said about leaning on it and equally matching the Rackers to the cutter I don't lean on it any i fine tune it until it falls through the wood it self you are a master to running a saw and sharpening a chain I and other will agree you have help a lot of viewers thanks I run a o tinman special xl76 homelite thanks for all you share and do

[@dougmentzer714]

The 562xp mII looks a very nice saw and the C85 chain throws nice chips.. Love your videos

[@andyprice4696]

Buckin the c83 chain is .50 gauge and the c85 is a .58 gauge. Both have the same X cut cutters. Same chain essentially just different gauge. That’s how I understand it.

[@BuckinBillyRaySmith]

Thx

[@jakeweed4110]

Yes this is correct!

[@jeffmckinney7828]

You got her Andy

[@jeffmckinney7828]

As close as I found is 55° 25° even though box says 60° 30° but it's almost a slight hex grind

[@andyprice4696]

@@jeffmckinney7828 agree Jeff, you can’t replicate it with a round file. I wish husky would actually make files for this grind

[@michaelwhiteoldtimer7648]

That sure is a nice saw Buckin, I will always pick a Husky every time. Welcome everyone to the greatest show on earth.

[@robertsmith470]

I've run Stihl power lawn tools for years, so my first power saw was a Stihl MS251, and it's been a great little saw. That being said, I'm looking to step up to something a bit bigger, and I believe the 562 will be the next one. I'm a east coast guy that does the usual home property work and disaster cleanup, and think the 562 will fit that bill and then some. Great videos Buckin!

[@martyrutter3630]

That saw was impressive! Husqvarna was smart to let you give it a test, just sharp business planning. Looking forward to trying Scott’s leather treatment also. Just got some today. 👍👍

[@OOOOOO12345]

It got me. I need one!

[@4170-d3e]

I love my 562 xpg !! They’re a great saw for everything big or small

[@ColoradoForestBeings]

Been hooked on your videos and ended up with a stihl 400 because of availability around me but I was sold on that 562xp cus of you. Thank you am learning a lot from you 🙏

[@marcbarrette5072]

Thanks Buckin. Love the sound of that beauty. Appreciate the demo and your opinion and will purchase one from my local dealer tomorrow.

[@BuckinBillyRaySmith]

My second day in the wood today . I gotta say I’m impressed

[@VE1AXC]

Get the 5 yr extended warranty if you do buy

[@mikecook2714]

I love my first gen 572, I run a 28 inch bar all the time

[@sendyplumber]

Do you mean a 562? Awesome saws! I like the look of the original version better than the new one. But I guess it’s performance and dependability that counts!

[@michaelmangrum5460]

Wow Bucking what a shed full of saws. My eyes got big and my heart lept when I saw that.

[@northtrailadventure6054]

I just got a new 562 XPG Mark 2, 28 inch bar, and running a pos c85 chain, I couldn't be more excited lol

[@robertblacksmith4355]

Alder ❤ always been one of my favorites for firewood😊

[@critterg8493]

Buckin did my recipient act today cleaned up a birch tree that blew down for elderly couple free of course

[@MATT.MAN-PEACE-LOVE]

Critter 💪 ✌️❤️🌲🪵🪓🐝

[@critterg8493]

@@MATT.MAN-PEACE-LOVE thanks buddy gotta help the elderly

[@BuckinBillyRaySmith]

well done

[@Atomic9t9]

Good man!

[@happyamerican3235]

This is what a man does! I couldn’t agree more 👍🏻 gets it done! 🇺🇸

[@emmitunderwood9502]

Hey buckin, I gutted the stock muffler on my 562 and piped it. WOW is it a world of difference. Way more power all around, especialy in the midle of the power band. I have a 24" 3/8 .58 chain and it is astonishing to me coming from the world of 40-50cc saws

[@BuckinBillyRaySmith]

You must be Lovin it

[@jessejones9830]

Thanks buckin ,from East TN i love my 562 and 592 but im gonna have to get that sweet spot 572 be safe and thank you bud i appreciate it

[@BuckinBillyRaySmith]

You won’t be sorry

[@jessejones9830]

I guarantee it,lol appreciate ya buckin and watcha doing,

[@PlanCthruZ]

So much good info. I got a notebook and everything. I’m in it for the long haul Buckin’! You’ll see! These vids are great for combatting my ptsd. A lot of other vids get me worked up somehow, not Buckin’ though! From the heart, thank you so much. Also, for what it’s worth, nothing heals the body more than whole organic foods, pure water, a good daily walk in the woods and laughter. Being honest with yourself about the stressors in life is also a key. Keep doing what you love, you’ll be stronger than ever in no time.

[@ClimbinHigh_]

Love the originality of the music for each video !!

[@justinsantapole7507]

I love the 562 nice handling saw.

[@TimberTrainer]

Great point you mentioned: a sharp chain is more important than the name on the saw.

[@keiranarmstrong297]

Just got myself a new 562 over here in Scotland, loving the content

[@BuckinBillyRaySmith]

Lovin it this far

[@zillman-mc9ld]

You know, I used to be a hard-core stihl guy. Because stihl is just the brand of choice in the area im in but i started watching your videos awhile back and you helped me decide to just give husky a try. I am glad i did because its just a better saw and its fun to listen to a wood cutting budy jabber about how my saw sucks because his is a stihl 😂 Thank you Billy!

[@BuckinBillyRaySmith]

Lol

[@stephenreiner1523]

Great video. Appreciate your time and effort and your down to earth dedication.

[@BuckinBillyRaySmith]

Thx

[@drkwlsk]

Keep going Buckin! We're not getting any younger!

[@jake424k]

As a 362 owner I’m loving this 562 video. I feel like I’d be just as happy with that saw

[@BuckinBillyRaySmith]

I have both and as a fella who has been compromised physically this year I’m Lovin this thing right now

[@MrFreeknassty]

Test all the saws you can. Any size. If they give u for free take it and review. I like any saw you review. I love the info. I think I speak for all we love the information. And all saws has there place in work. And a lot of people got buy 50cc or less we less.

[@MrFreeknassty]

Thank you very much for all your post. I love what your doing for people, and the reviews and just love the energy you have to put in ur videos. Great job @buckinbillyray

[@BuckinBillyRaySmith]

@@MrFreeknasstythx

[@ChrisLascari]

Husqvarna is going to make 10s of thousands in return on their investment in giving you that machine. smart business. Another great video, Bill. Thanks. Chris. Hart, Michigan USA

[@BuckinBillyRaySmith]

After seeing there factory and museum in Sweden it all made sense

[@danbarth9421]

Buckin!!! Glad ta see ya on a powersaw!! The look on your face while runnin them says it all brother😊😊 i am very impressed that 60cc saw pulls that 28 like it does!! I may have to purchase one or two of em to add to the arsenal!! Thanks for what ya do brother, much love🪓🪵🌲

[@SteveGolliher]

Glad you're given the 562 a chance great saw for most people well balanced the fuel economy is amazing cut safe my friends

[@BuckinBillyRaySmith]

Right on

[@terryw.milburn8565]

Husky Sure Was Impressive With Your Skilled Hands B.R. ! Prayers For All Here ! ATB T God Bless

[@ryankelly1846]

I daily this saw at work and I absolutely love it

[@oakiewoodsman]

That is running great! I was worried they would be down on power because to my understanding they reduced compression a bit from the last generation that I have. Looks to be running very strong for sure!

[@Alexhulk]

Happy that you're smelling the 2 trokes gaz❤❤

[@kevinjordan807]

Thanks for all the wisdom. I love your spirit you bring your the man 👍😃

[@diy7594]

That saw pulled that big bar really well for its size

[@BuckinBillyRaySmith]

Surprised me actually

[@ricktaylor3748]

@@BuckinBillyRaySmith If you keep letting go of your handle. You're going to get called: :One Armed Bucking Billy.

[@livingadamman7994]

Hey Buckin, heres a good slogan for a T-Shirt. "When man and chainsaw become one" (for a moment in the moment) Watching you play with that saw reminded me of this variation of the old saying of man and machine.

[@joecliffordson]

I have had three Stihls an echo and a husky I like the torque of the Husky. I got the Stihls cause that’s what pa had. Then I moved to Husquvarna land. That’s where the support is in my neck of the woods. They will service the competition grudgingly but mostly because I bought th little echo and my 372 xp from them.

[@michaelnewman-ds3fr]

Love it Buckin it all makes since to me brother it didn’t over a year ago but I’ve been learning since then thanks to your teaching and all your knowledge! I’ve always managed to get all my wood cut back then but it sure was a struggle! I would love to see some of the processes on the muffler mod when you do that if possible!

[@BuckinBillyRaySmith]

I’ll make it happen brother

[@DawnLoganio]

My favorite dude, doin my favorite stuff !! Gotta love it !!

[@malachy9400]

Hello from Ireland Billy Ray, just love your videos on everything to do with trees and chainsaws. My first saw was a Stihl 251 and next came an Echo cs621sx and that gave me a thirst for power so now i'm wating on an old Stihl 056av to arrive in the post. But i'm scared Billy Ray because i'm looking at my old Suzuki T500 two stroke and thinking that would make a fine chainsaw.

[@naturundhund]

Nice Chainsaw. Greetings from Germany Peter

[@oakiewoodsman]

It is running great Peter!

[@technosamurai9825]

Buckin', you are home front.

[@jarandorelat]

10:57 because my chain is dull or my rackers are not hungry enough.

[@mikelewisoutdoors6434]

I’ve got an old Johnsered and I love it but it’s time for an upgrade. I’m thinking that this is my new saw. Thanks friend

[@BuckinBillyRaySmith]

So far so good on my end . Actually better than I thought 😊

[@brotherkith]

Once again you're saying what a great saw it is and yet you are going to change the muffler! 😊

[@mariuszwojtarowicz8107]

Hey Billy. Would love to see your take on how to properly maintain the C85 chain. Love your content, been following your advise since I discovered your chanell and it all works and makes sence. Keep up the great work. Greetings from Poland

[@EricChmelarsky]

C83 CHAIN is .050 guage, C85 is .058 guage. Full chisel X-CUT chain. Awesome stuff.

[@BuckinBillyRaySmith]

Copy that thx

[@buddysumner4022]

I like sthils ,echoes,johsred, and husky I own all of them but I love my husky’s they just tug at my heart

[@extremefishermen6335]

The 572 definitely looks powerful 👌

[@johnPrice-qi6cs]

Howdy mr.bucken, outside and just check phone there we go,that 560 I guess is looking pretty good with the long barI know they will pullem,limb😂ed and buck some with the old ms290 but mostly limbed but they will pull that long bar all day!!!! But has its limits lguess,always love the speed and power difference in the 70cc class but always run the 90cc on bucken,not putting the 60cc stuff down at all,that is sweet and a screamer,good stuff as always!!! Knowledge Knowledge!!! As always pleasure! Sierra.John

[@BLaZeD0ut23]

Your the bomb! I’m Just gunna say it…. Much love from little Rhode Island in the states.

[@BuckinBillyRaySmith]

Well that makes an ol’ lizard feel good ❤

[@NapoleonBonaparte5]

So many saws I'm amazed.

[@markvanlaren6467]

Man that saw cuts like butter. Wow.

[@dimisdilo]

The king of the saw!👌👏

[@troopygino]

Hey Bucking these 500 series saws from husky are really nice I must say!

[@johac7637]

Haha,, wore out my first McC...and then some 090, 066, 044, and brought a BC broke in 066 to Arizona this winter, cutting up some Mesquite, dang, i thought i could file a chain, working for F&G for my carrer on the BC Coast, but dang this Mesquite had me looking at my chain, this stuff is like cutting a C Frame on a D8, but ill get some BBQ charcoal to return to BC with. Alder is like cutting butter, Birch is likr ftozen butter, Maple like wood, but this Mesquite is like a D8 C frame, just it doesn't get dull.

[@DevonReeley]

Much love Buckin!!

[@Z-Bart]

For me and about 1M other weekend warriors 60cc's is all we need.

[@shannonwhitaker9630]

I broke out and went to a 72cc. Now I’m out of stuff to cut.

[@Z-Bart]

@@shannonwhitaker9630 I got one too. I like it for cutting (bucking) 2 logs at a time.

[@ryanbaer6661]

i have a 565 its the auto tune version of a 572 for a few bucks less. i got it used and love it so far. need to get dogs and a big bar for it

[@cliffjenkins6419]

Maybe a smallish saw Buckin but even with that long bar on it cuts fast by my reckoning,specially considering you were cutting alder. Great video and as always good advice. Cheers from HB N Z

[@BuckinBillyRaySmith]

It s getting it

[@fixtritephil7712]

BEAST of a saw!Gotta like it!

[@suntalunta]

08:30 "THIS IS HOW A MAN DOES IT" Continues to slice that log like a frikkin salmon! 😂 I'm impressed!

[@BuckinBillyRaySmith]

lol i like salmon

[@scottwilson4396]

Nice little ripper Buckin ! To my understanding C83 and C85 is just the .050 and .058 version of the same tooth design

[@sixoh_diesel5662]

Dewalt bar oil is the DGP bio-bar oil available at the HD

[@brownwrench]

Alder is great to work with. I also like Ash. Splits so easy

[@russhall4780]

The 562's are pretty impressive little 60cc saws. I own a few of them and can tell you that a muffler mod really brings them to life.

[@BuckinBillyRaySmith]

I think that’s all I ll do

[@treemeister1513]

Thanks for your time.✌️peace everyone

[@DanLathrop]

That's a nice little saw I've got a little older one I run some times

[@MontanaRoofer]

Husqvarna every time!💪🤘✌️

[@forrestebert5276]

I’m in CA and if I remember correctly it was about $85 in that area. Shipping from Canada isn’t bad really.

[@ralphzimmermann]

simple and effective technique.

[@cancelchannel3394]

Interesting comparisons 🤔🙂

[@radleytube]

Good to see ya cutting again! Something about watching a chainsaw in action , it's good viewing

[@BuckinBillyRaySmith]

Thx friend

[@Righound4]

Great firewood saw!

[@beckyumphrey2626]

Buckin, does the chain brake.work.when you hand is not.on the bar?

[@MATT.MAN-PEACE-LOVE]

We hope the chain brake on a saw activates if we happen to encounter kickback while holding on to the saw as it kicks up and yer still holding it the brake pushes forward stopping the chain I suppose it’s a good idea but it won’t stop a saw flying out of your hand it’s good to always be aware and ready for kickback it’s a thing we try to avoid but it does happen hopefully we hold on to er ✌️❤️🌲🪵🪓🐝

[@forrestebert5276]

Go to your buddy Walker and get one of his excellent mufflers for your 562 and that’s all you need! I pull a 24” on mine don’t need any bigger but the saw rips!

[@Shane_Reynolds85]

Does Donny have them in the shop or what? I don’t see them on the page.

[@forrestebert5276]

@@Shane_Reynolds85 Call them up. I sent my muffler off my brand new 562 and they did their modifications on my muffler and shipped it back to me.

[@forrestebert5276]

@@Shane_Reynolds85 I sent Walker my muffler off my new 562 they did their job and sent it back and that’s all that is needed the saw rips!

[@Shane_Reynolds85]

@@forrestebert5276mind if I ask you his cost? Are you in CA or USA..? Just curious as I feel this is the route I’ll go.

[@ibbylancaster8981]

I have a 585, and love it. Looking for something a little smaller to run a 24 or 28 bar. What husky would you suggest Buckin’?

[@BuckinBillyRaySmith]

I’m just gonna straight ,, this thin is impressing me

[@ibbylancaster8981]

@@BuckinBillyRaySmith I was looking at them recently. I live down in the southeast US , so the wrap around bar is an add on here but I am probably going to get one. I have an old 51 that I bought years ago from a pawn shop and it’s still kicking along. Thank you and be careful out there brother. Much love 🤙🤙

[@GertRupczyk]

❤Great video as always Thank you for sharing

[@diyjeff1838]

I have a 562 and i love it. I want a muffler mod on mine. I hear it really wakes up the saw.

[@RickMartineau]

C83 is full chisel, .050 gauge, and C85 is full chisel, .058 gauge. X-cut is designed to be round file sharpened after the original factory grind. Enjoy.

[@seanpierce3394]

Hey Buckin great video. Congratulations and husky sending ya a saw. Qas wondering why you chose 3/16 file instead 7/32? Hope the healing is coming along

[@BuckinBillyRaySmith]

I’ll explain

[@jeremyhitchcock9182]

I have yet to run a 5 series saw, I'm kinda partial to the 2 and 3 series. If I could only have 1 saw in the 60cc range it would be the 266.

[@jasonverquin4427]

The only factory husky saw I see with the full wrap handle is the 562 XP GW. Did you add the full wrap on the mark 11 ?

[@dannyrowe5850]

Hey Buckin, would you di a hit saw test, in some if these older 562s if you run them hard then let them set fot ten fifteen minutes they are a pig to start hot I'd still rather have a 572 like yours

[@rickgoodson2792]

It was beautiful today just wish I could smell the fir tree dust. It doesn't grow around here maybe some in North Carolina

[@MKHNitro]

"A pulling chain is your friend" Buckin Billy Ray 2023

[@19Kamau79]

Just beginner here and wondering how long new Oregon chain 13" 1,3 0.325 could last before getting dull?? as I've been helping my mother with 5 pines 47-63feet high and 12-17inch thick, cutting them all to 12inch firewood size at clean snow without worries of sand or dirt, I still feel saw bites pretty well..

[@jimmyd868]

I like Dolmar 6100 going to get one. What you think? Would like to hear what you think.

[@Alexhulk]

Cool ... Strong anoght for a 28 inch bar❤❤

[@BuckinBillyRaySmith]

Hey ol buddy

[@marlawhite3682]

love seeing the ventage saws in there too !!! What would u recomend for a saw for a lady just useing one to cut lightley for getting spoon carving wood and around the house. have u tested any of the smaller battery saws out there yet? Keep on Buckin!!!

[@BuckinBillyRaySmith]

Battery wood be perfect for ya for that need . Husky is my flavour

[@woodloveoutdoors]

Can't wait to see what you do with the saw a different exhaust?or maybe a visit to team ripsaw😂 I've got the 560xp I removed the decomp valve and i run a 33 to 1 fuel mix I use Yamahalube 2R a dirt bike mixing oil and it run real good on that more oil more power in these 2 stroke wicked saws ❤

[@SmugMrSmitty]

2:12 glad to hear it not pronounced "steel"....lol cheers from ontario 🇨🇦

[@theronshields7826]

You talked a lot about square chain. What is better square grind or round file. Just getting into this stuff. I have run chainsaws but never really paid attention too much to all the details until I started watching you. What should I use. I am a wood turner, I make bowls on my wood lathe so I use a chainsaw to process the logs but recently have been having some trouble with the saw not only staying sharp but getting a good cut. It is really frustrating trying to operate a chainsaw that does not work right.

[@TAGhostman968]

Buckin what is going through your mind when you walk into the bunker and are a looking at all your power saws?