Husqvarna 562, this Modification transformed this chainsaw.

WE ARE GETTING SOMEWHERE NOW HUSQVARNA 562.
www.buckinbillyray.com/
www.ripsaw.shop/BUCKIN

[@ryobrown-mcclain805]

It's such a pleasure to be on this adventure with you, thanks for taking us along with the 562. Thank you

[@BuckinBillyRaySmith]

yer welcome

[@kena658]

Good to hear an oldschool guy appreciating the nowaday things. And for sure more ergonomical tools these newer ones.

[@wayneanderson991]

My 572xp responded very well to a pipe I made and it appears that the 562xp will respond very well also. Makes a fella think twice about porting these saws when they respond so well to a well thought out pipe and a proper chain!

[@BuckinBillyRaySmith]

got that right , I not sure yet but i think this thing will ride along nicely with my ported 362 that rarely sees the light of day 😂 😂

[@borealmetalworx]

Hi Buckin. I’m in Northern Ontario, mostly Spruce and Jack Pine. I bought the 550XP Mk 2. Absolutely love it. That auto tune is the sweetest thing, set the saw down and it will idle all day.

[@carlotodaro5052]

that pipe sounds mean, love it ! With that being said, I've been cutting firewood for over 55 years(and still cutting). I've been riding Harleys(straight pipes) driving trucks, shooting guns and running bulldozers too. Do you see where I'm going with this, you've got to wear that ear protection. You've got to protect your ears even if it's only a couple of minutes of running a saw. I wasn't smart enough to know this when I was younger. I've got Tinnitus and that not something to look forward to. Just looking after you like you do for us. Getting back to that Husky wish I was in the market for another saw. That saw with 24'' chain would be a perfect fit for me. Who knows maybe I'll talk myself into one. That was nice of those people sending you that saw and Smart. Who knows maybe some kind of discount coupon for your followers in the future. thank you, Sir

[@cheba4786]

Все верно. Мой отец работает на бульдозере-и у него тоже шум в ушах и плохой слух. Он работает без наушников

[@SamPaulson-we7of]

Hogged out the middle of the stock muffler on mine and welded on a west coast saw exhaust port and it’s a ripper now. The autotune just adapts to each tweak or performance enhancement flawlessly.

[@shaner67]

All the credits for design, durability and craftsmanship go to Morgan.. He has dialed that pipe build down to a science.. Fantastic job Morgan 👍👍👍

[@BuckinBillyRaySmith]

He's one of the few men i can work side by side and not get in each others way

[@fmcmillan08]

I’ll be buying myself one of these after seeing it get put through it’s paces. Thanks for the good info Buckin’ Especially seeing what it does after being piped.

[@j.d.williams6882]

Ya, my wife might kill Buckin!! Making me get another saw. LOL That MkII seems like a winner!

[@whatyameann6573]

Original 500i is faster and lighter bre

[@j.d.williams6882]

@@whatyameann6573far heavier on the wallet my man. That would be plus $700 bucks. Plus I prefer Huskys, don't hate Stihl, just what I like.

[@Ceemysix]

@@whatyameann6573500i is 600 dollars more and 85cc. So yeh, it’s faster.

[@bracaarboristi]

​@@whatyameann6573 62cc vs 79cc?

[@robertblacksmith4355]

She cuts as good as she sounds!

[@kenj469]

I'm in my 50's now and love my 372 and 288, but i also like setting them down and limbing with a smaller saw. Nice saw Buckin'.

[@martyrutter3630]

The dynamic duo, a little Morgan and Buckin magic and here we go! 😂

[@RickMartineau]

The Triple Nickel is awesome!

[@hoops63]

Looks like a great fire saw. This is good size for Hotshot crews 90% of the time. We used to run 266XP's back in my day and remember getting that same satisfying howl when we rigged K&N's. We were Forest Service, so we didn't "discuss" muffler mods.

[@robertdouglas3456]

Great video & information Buckin! Thank you!

[@BuckinBillyRaySmith]

welcome .. grateful for yer time spent here

[@luisdacosta1541]

I used 395, and T525 ,and had no need for nothing else.. but trees are different here on Portugal, we have big trees,but you have gigantic trees... I'm subscribing to your Chanel just for the happiness I saw on your face while working that saw.

[@BuckinBillyRaySmith]

welcome Friend

[@edwardpriestley2747]

Nice to have such a talented friend to hook you up with some great mufflers shout out to Morgan!!!

[@tonybateson6894]

seems like a winner :) I just picked myself up a mint 044 10mm that runs hard. Cutting firewood, splitting and being a stay at home dad. Thanks for the inspiration

[@jthomas1878]

Billy, just wanted to say you’re so wholesome it’s refreshing to see someone on KZbin with a message like yours. Love the content, could watch it for hours. God bless brother.

[@user-bm2wv6gv7w]

Great video as always- you can hear the difference ❤

[@ProlificInvention]

Back in the day I had an old Homelite XL925 that I used for cleaning up overgrown properties. That old reliable daily driver with a massive bar was a faithful ripper

[@BuckinBillyRaySmith]

great ol' saw

[@ennisservicesnc6781]

I had one that had some port work and a muffler and that thing was an animal. It got destroyed before it was 100% broken in but he's building me another one and I'm anxiously awaiting it. Glad to see a true professional agree with my opinion

[@nalamb4495]

Buckens back playing in the “Man Glitter” (saw dust) thanks for sharing some of the amped up energy with us. The 500 series saws are tough customers. I have ran the 545, 562, and 592 XP’s the MKII’s are scrappy fellas and will definitely surprise when broken in, and especially with a tuned pipe of sorts. seams those types saws like pipes a touch more than a header type for some reason in my toying. Those saws make a lot of power for thier weight. A lot of ported saws are only just over the 500 series by about 10-15% but once ported those husky’s they all grab a whole new gear.

[@danbarth9421]

And yet again,MORE GREAT CONTENT!! just finish both recent videos, and wow man, what a difference that pipe made!! That little saw is a brute!! I dont own any 5 series yet, only the 3 series, and it looks like i will be buying a 572, and.....a 562 now lol, ghee thanks buckin for helping me add to my collection😂😂 hope ya have a great week, and glad ta see ya feeling better🪓🪵🌲

[@Kristof-1983]

That's a lovely mod pipe!! Nice sound on steroïds❤❤

[@telekaster19991]

With the new pipe that saw sounds like a Honda CR500!

[@paulgreco2188]

Wicked gains, good work Moganzee

[@rakersdownnz]

Jeez Morgan, I wish you would put a guard on that grinder ! You're scaring me.

[@midmooutdoors7556]

That saw gets down. I'm definitely thinking about getting one

[@michaelnewman-ds3fr]

Thanks Buckin l! She sure woke up with that muffler mod love it!

[@Skinnymoose]

That saw is nice for sure.

[@jylbo]

Wow, awesome to see a 562xp like mine but twice as hungry !

[@PlanCthruZ]

“Buckin’ is bequeathed Excalibur by the Lady in the Lake, (whos’ name is “Husqvarna” if you didn’t know), and immediately transforms it into Obi Wans lightsaber” purely for “chits and giggs”. Looks good on ya! Sounds So Good. Sounds like if Norton made 60 cc scooters instead of 750/850 Commandos. *Also “up to your plums” lolololol!! How do you do it?!? Bro you’re gonna OWN KZbin one day if you keep this up! Nice Boots. 👍

[@stevefrompeterborough4007]

That opening, I want to be on what your on, you crack me up!

[@PlanCthruZ]

BBR demonstrates the dictionary definition of the word “Panache”…

[@ryanmoss5937]

My dad has the mk1 550xp and it’s a beast for a 50cc saw I love it

[@andyprice4696]

I’m gonna have to get one of those 562. Been thinking about a 500 series for awhile and this looks like the one.

[@BuckinBillyRaySmith]

great saw in its class

[@stevetheriault4164]

CONGRATS ON 505,000 SUBS BUDDY HAVE A GREAT WEEKEND EVERYONE

[@rejeanparent4095]

Nice modification

[@davidmech2956]

Awesome difference

[@HairlipButcher]

Little ripper for a stock 60cc saw!👌

[@BuckinBillyRaySmith]

i like

[@cathydavis3263]

Buckin billy ray and this is Matthew Davis I have a 372xp x-torp and a husqvarna 51 and a 455 ranchers

[@BuckinBillyRaySmith]

right on Cathy

[@antoniomorgado5304]

Mr Morgan going TIG welder like me. It nuts.

[@clintmullins4406]

I bought a 550xp first edition. It never ran right. Took it back to the dealer and they charged me a service fee to “look it over”. They claimed no issues found. It blew up the very next trip out. I mailed the saw to a dealer in Maine who fixed it for parts only. Sunfish on arboristsite nice guy. I spent $350 on shipping, top end, and a new carb to fix my saw. It seemed to run okay but i sold it and bought an echo 620p.

[@freakyfighter5]

Dayumm Buckin nice boots! You’ve brought awareness to me for many things through your videos. What brand are those hoofs?

[@marcinszafranski4452]

New pipe works great. Hope They put new, better bearings on Mark II (I work with this saw almost every day). The first edition of 560/562 had too weak bearings. Only 8 steel balls inside and something like plastic collar to keep each one on right place. The weakest point of all construction. Take care Mr. Buckin🤘😄 best wishes from Poland 🪓

[@BuckinBillyRaySmith]

they have apparently addressed that one pretty quick after some of the failures

[@haroldhodge7770]

Very nice 👍

[@stevemiller6547]

You are The Man!

[@nandog1024]

Too much power !!!! Working the fine line husq

[@wednesdar452]

Impressive!

[@genefoster9770]

very obvious difference proper exhaust is important if the saw is taking x amount of air in it has to be able to push that amount of exhaust out just like us humans if we are breathing in a lot of air if we cant push that amount out we dont run very good lol great video see you on the next one

[@shawncapps1173]

great one.

[@griffinphilemon5083]

I figured we'd get a "let it, absorb the universe."😂

[@BuckinBillyRaySmith]

ha ha ha

[@stevenpate8490]

Looks pretty tough, I just can't justify the purchase of one since I already own a Jonsered 2260.

[@benjobello]

Thanks for these videos Buckin!! Man I don’t know how you don’t wear ear protection though?

[@user-ru4sl9mo4z]

I wish I had the ability to build pipes that nice

[@BuckinBillyRaySmith]

oh i think we do brother,, we just dont want to, more than we want to

[@Z-Bart]

Very nice saw BBR. If and when my 357XP dies...I'll be getting a 562. Or, I'll rebuild the 357.

[@BuckinBillyRaySmith]

either way yer golden

[@ronsilva516]

Well it would make a good fire wood saw . But go to saw is my 661 saw.hands down but that my opinion only 👍

[@husqvarna-pit9044]

😎😎😎😎😎😎😎 Cool Husqvarna -Pit

[@gregtaylor8327]

Best Saw ever to sit all day idling was my 266. 1983 gurl. What a Saw.

[@8marcrara11]

Goodonya Billy Ray👍🇦🇺

[@jasonpinnix1905]

For my personal saw that only I use I knock the rackets down I want it to eat and chunk out big chips .

[@scottallpress3818]

I’ve got a load of logs coming to ring up and split for next year , I’ve never wanted to touch my 576xps muffler as it was my late fathers and I know he wouldn’t approve , but I think it’s getting piped after watching this transformation!!

[@BuckinBillyRaySmith]

that particular saw wood do great with a donny walker style .

[@scottallpress3818]

@@BuckinBillyRaySmith I’ll give it a try!

[@GASparky217]

2:52 living dangerously with that angle grinder. One slip and you’re done for.

[@Grizzman99]

That muffler works lol… wow

[@Jan-Sietze]

It sounds so familiar and good, a "seventy-two" (15m 25sec) Even though I know you mean a 562. Personally, I'll stick with my 372xp, first love...

[@rogerjustice8835]

So when can we expect a second u tube channel from you, you can call it opera with Buckin Billy Ray. You can moonlight as an opera singer, we know you can sing now no hiding it lol.

[@critterg8493]

Morgan 💪🏻💪🏻💪🏻

[@jolkraeremeark6949]

The stock saw/exhaust sounds very anemic, must be government regs, eh? She does sound proper with the modified exhaust. Nice work! Peace, love and powersaws✌👍🏻✌

[@Fparrish]

Another epic vid! Who’s making good ported mufflers for my 372??

[@tonywelch7786]

The pipe makes a big difference on this.

[@damienskinner342]

Hi Buckin' I am really enjoying your video and I was wondering if we can also see a modified Stihl 034av super chainsaw and a S65 Partner chainsaw please

[@d.ahwooomazenkas8075]

Ahwoooo get one 👍

[@michaelstem5319]

Wow billy that was a heck of a difference i have a 2017 model I would like to try one of those pipes out how do I get one please let me know thank you so much for your videos I love them 😊

[@BuckinBillyRaySmith]

yer welcome , glad you enjoy the videos

[@leonardvirtue5753]

Nice 😊 🤠🤙🤙💪

[@user-ug7on5xj8b]

Buckin" that is one awesome pipe!I have the Jonsered 2260 which if Im not mistaken is the original 562, will the muffler pipe you are running bolt right on to my 2260?

[@RMosher11]

As far as holding the starter rope when you kill it: I have a Husky 390xp, thing is an animal, 160~psi of compression, does not tug back when you shut it off one bit. I rebuilt a little Husky 141 for a guy at work, 144psi compression that will yank the rope every single time. I also have a vintage 1989 Echo CS 5500, does not tug one bit. Go figure!

[@rodmcisaac3]

Stock muffler reminds me of the statues on Easter Island.

[@Tantrum791]

Did you have to tune it to the new muffler at all or did the auto tune work good?

[@tonywelch7786]

How's the pipe making that you were working on earlier for the 500i coming along?

[@kygreenskeeper8326]

Awesome billy ray! How do i order one of those pipes for my 562?

[@RickMartineau]

562 XP Mark II is a ground up rebuild. Hope you enjoy.

[@BuckinBillyRaySmith]

Check yer email ol boy

[@BuckinBillyRaySmith]

I’m Lovin this thing Ricardo

[@clintbliss2046]

Does it auto tune to best emissions or best power?

[@DangRight]

I want one of those mufflers for my husky 55 haha. How much are those things?

[@RickMartineau]

Autotune 3.0 starting procedure makes this saw a dream to start.

[@BuckinBillyRaySmith]

Indeed

[@jasonsytsma9367]

Sure, autotune might be nice, but some of us like to (need to) fine tune and adjust our saws ourselves. Would be sweetest if Husqvarna would make both varieties...autotune and standard carb, and just call it "pick your option" 😊 The pipe lit that saw right up. Guess iv got another project

[@MichaelHoranzy]

rembember jonesread buckin?had a friend that had a few.h one was big heavy with a pretty good size bar. lumberjacker for sure.musta been one that fell off your truck eh?

[@Southpaw226]

Would love to see this compared to the stihl 400

[@BuckinBillyRaySmith]

the 400 better beat it. cause if a little husky beats a bigger stihl. ooooooh! not good for the 400 owners

[@xavierc8383]

Hey Buckin thanks for the video, the saw sounds great. What do you think about autotune? It adapts well to mod? Thanks again and have a good day everyone!

[@BuckinBillyRaySmith]

i think thats what that saw is designed to do , adapt . its been great , if yer a motor man you can hear it adapting to the changes i give it

[@ibrahimylmaz530]

motorun numaralarını yakından gosterda anlayalım alırız ve paların boyu kac kac dıstır kullandıgın motorun dısı

[@johac7637]

What will happen when your out in tne sticks snf you look back and your muffler has set a fire, ive bern there before the screens, and evrn after with a removed screen muffler.

[@braydensawaska7929]

May I ask what wedges you use? And your faller gear? ( not climbing gear)

[@tjgrossman]

G’day Billy, is that a Walker lightweight bar you got on that 572? Do you know what it weighs? Cheers.

[@julianlaustsen1991]

cowboy boots like that are bloody dangerous because they are so slippery.

[@1944chevytruck]

be kind

[@BuckinBillyRaySmith]

nice truck

[@levirondeau1822]

How do we get our hands on one of them

[@TheBrownkow]

Is that saw more comfortable to run than a 500i ?

[@stevieb.1473]

Hey Brother, I've been lookin for a set of engineer boots like that. Where did you get em?.

[@mikepici5553]

I've been thinking about buying a 562,would it be worth it buckin

[@Alexhulk]

Is it real that a long bar on smaller saw is damaging the clutch?

[@codyglomboske113]

Hey buckin ive been trying to reach out im 31 i want to persue my dream as a tree feller or lumber jack...i dont know the right Terminology. But i was hoping you could give me some advice on where to start or what i can do to persue doing so or if my age is to old. If you could reach out i would really appreaciate it. Thanks for all your videos watching you and learning from your videos makes me hungry to want to persue a carrer in tree felling using a chainsaw!!!

[@fomocomofo5694]

What are the things called that are around your boots ?