A year of failed experiments

[@NeonVisual]

Builds hydrophobic nano coating, accidentally creates the world's smallest sponge.

[@BreakingTaps]

BRB starting a micro sponge company

[@NeonVisual]

@@BreakingTaps 🤣

[@bit0fun]

That would actually be a useful thing though; could make super absorbent cloths

[@Pyrothorgrabmyhammer]

Try sanding the metal before the building the coating.

[@sebimoe]

@@Pyrothorgrabmyhammer that would be very spongy

[@RiffZifnab]

Thanks for being brave enough to share some of your failures with us. Hope to see some of these get finished whenever they come to fruition. (:

[@NeonVisual]

Many of the most ground braking inventions and discoveries happen accidentally. More failures please!

[@Cherub1m7]

Showing failures reminds everyone that technological advansement is only met with a mountain of failures. Thanks for showing your learning experences !

[@bryan.conrad]

It was great to get a peak at the projects left unfinished. Every creative person has at least few (more probably, many) half-done projects on a shelf somewhere. Mine give me little pangs of grief when I think about having left them incomplete, so it was nice to know even someone as prolific and motivated as you has left a few that way in favor of more interesting ones.

[@vizionthing]

I think if we asked enough people this is actually the norm, it is for me.

[@karlharvymarx2650]

It is nice to get a reminder that I'm not the only one with unfinished projects. Watching a lot of youtube videos usually doesn't help since it can create the illusion of people who always finish everything and in the end it almost always works. I tend to work like a mad man on a project for about a week to a month before some other cool idea sidetracks me. On the bright side, I have at least gotten to the point that I often return to them within a few years and eventually get done enough Oh, and I'm the only one without exactly the right materials, parts and tools for the job. I'm the only one with stuff literally made of duct tape, magnets, scrap wire and balloons, and junk I happen to have laying around or dig out of the garbage can.

[@edgeeffect]

I think I ONLY have unfinished projects. ;)

[@sietuuba]

@@edgeeffect I'm at my most productive when I'm sidetracking myself to abandon yet another avenue of half an idea.

[@stefansynths]

I know I'm not the only one who doesn't finish many of their projects, but it's really heartening to hear about your abandoned projects. It's like how influencers only present the glamorous side of their life, leading to unrealistic expectations in their followers. Thanks for sharing!

[@TaranovskiAlex]

You, "Stuff Made Here", as well as Colin Furze are basically unreachable in terms of dedication and labor poured into your projects!

[@ARVash]

Honestly some of this is almost more informative than other videos. I feel like people often don't share their failures, but really often failures are successful experiments. I wonder if you actually need a vacuum, or if you could just flood it with an inert gas, or even just CO2.

[@sietuuba]

Frankly, every single abandoned experiment here is impressive on their own already. Much respect for giving us a peek!

[@tekjess_]

The amount of knowledge and experience you gained just from attempting these projects is amazing. Keep up the amazing stuff!

[@LucGendrot]

I'd personally love to see more of the ceramic and metal printing projects! I've seen a few other channels try their hand at it to mixed results, but I think with your attention to detail you could really nail down a good procedure, which would be awesome for the DIY community!

[@Alexander_Sannikov]

I love it how you tried to create a super-hydrophobic surface, followed the protocol exactly and ended up with a super-hydrophyllic one :D

[@mckseal]

These are some brilliant ideas. I found it curious how excited I got each time you introduced one - but can absolutely see why they became hard to complete.

[@Lasselpk]

Knowing some of the amazing projects you have achieved, it is really comforting to know that far from all of your projects succeed. This makes me want to take on some of my own semi failed projects. Thank you 😃

[@derrekvanee4567]

You had a Tbi right? Had a stroke 2016 and havnt done any machining or 3d printing or ee or digital art:games since. Keep on chugging bro love seeing these to add to my maybe one day pile

[@laststand6420]

Most people pretend to be smarter than they are. This guy pretends to be normal, and is one of the smartest you tubers I have ever found.

[@BreakingTaps]

🥰

[@bowieinc]

So, this was one of my favorites. I loved the rapid fire exposure to so many different technologies I was unaware of.

[@DavidLindes]

FWIW, I'd definitely be interested in seeing more about the VAST project (1:05). Telescopes are cool; controlled motion is cool; multiple apertures is fascinating... More please? :)

[@fikr1234]

It's easy to forget how many failures are behind each success when we watch these carefully curated YT videos. Awesome to get a peek behind the scenes. :)

[@beautifulsmall]

Boxes of projects, image stacking was very new in 2010, helicon focus, i had a free version as a tester and gave them some fly stacks I had made on a 2D rotary stage tried to hack a Cannon lens. no info and failed. metal epoxy for lathe bed repair, W2S moglice recipie. filled a cheap pillar drill stem with concrete and rebar. 3000C, excited. Thanks for sharing all those paths of facinating ideas. we cant go down them all. I feel I share several.

[@thaphreak]

I love all of these. Thanks for sharing, it's nice to know you are only human as well and like so many of us, not every project gets done.

[@ericlotze7724]

This seems like a good format to show all the failed projects one did, without having to make full videos for each one. If i ever get started doing videos I’ll probably try and do something like this, also I’ll try and make sure @TheThoughtEmporium and others see this too (if they don’t already see it due to subscriptions lol) (also *if i can get my discord account running again* )

[@JasonCummer]

Its nice to see things others have tried and failed at. It makes me feel less bad about the projects I am still working to get right. Certainly tricky to get some papers replicated even if they seem straight forward

[@dexio85]

Sharing your failures is as important as sharing your successes. This is very interesting material and kudos for sharing it with us.

[@campbellmorrison8540]

Wow that is a serious list of starters, Im thinking Pulse plating sounds the most applicable to me but honestly they are all fascinating. Love your work, Merry Christmas

[@digus]

So awesome of you to share this. Certainly makes me feel better about some of my own projects.

[@JoshuaRosaaen]

Wow...I sure wish these dropped ones were in series. Great stuff...hoping to see more if this as it progresses. Thank you for sharing these learnings and explorations.

[@Anya-Prime]

This is fantastic. Failures are sometimes more interesting that successful projects even if they aren’t nearly as satisfying. I’d watch a much longer video about these projects if you ever expand on them. Thank you for having the courage to post these unsuccessful concepts you attempted. I barely understood half of them and wouldn’t have been able to even attempt the remainder so you’re still doing amazing things with these

[@derrekvanee4567]

Also I hear yellow chemistry is bad but Australia doesn't know that yet go tell them how amzzing yellow chemicals are bro!

[@saukhaven]

Thanks for the inspiration! I share many similar interests with my own work space full of shelved projects. You have inspired me to revive a couple. Maybe my nickel/graphite fabric supercapacitor or an adaptive sparse aperture telescope...Life's too short!

[@Wreaktifier]

Failure is inherently more interesting than instant success. Failed experiments are just as important as successful ones. Good starting points for folks standing on your shoulders.

[@dandan-gf4jk]

7:12 this is the most amazing I've seen from you so far. It really brings out the thickness of the trace. oops, you even mention it's not afm 😅

[@Alexander_Sannikov]

I liked most of the projects, but growing optically interesting crystals got me tempted the most. heck, even just demonstrating birefringence and optical anisotropy is cool.

[@andymouse]

Great end of year look back ! we all have projects that don't quite get there !....cheers.

[@andrewowens5653]

If I could recover only 10% of the money I spent on materials for failed projects and incomplete projects I would be a rich man now!

[@BreakingTaps]

Ain't that the truth!

[@user255]

13:41 What if you wet the material with alcohol before pulling the vacuum? I would guess that would drive the oxygen away from the particle surfaces and leftover would act as reducing agent.

[@BreakingTaps]

Will give that a shot next time! The Virtual Foundry folks also recommend adding some kind of reducing "ballast" like carbon/graphite to help eat up excess oxygen. I suspect I might have a leak in the vacuum furnace though. It's an old ebay find and when I was packing it to move shops I found a section which I think isn't sealing well, letting in tons of ambient air.

[@smellsofbikes]

There is great value in "this didn't work" so other people don't follow that path. These are all still really interesting projects. Your flexture creations never fail to be inspirational, even if they don't work the way you wanted. The NLO crystals are really cool. It'd sure be neat to do a DIY freq doubled laser.

[@BreakingTaps]

Thanks! I was shy about sharing them individually, but figured as a collection there was enough interesting stuff here for people to enjoy. Agreed about the crystals! I'd love to revisit that one, even have some new designs drawn up just haven't gotten around to doing it. Need to make basically everything out of glass or plastic, maintain two temperature zones (cooler in the crystal chamber, warmer elsewhere) so that it only crystalizes in the chamber, filtration to remove contaminants and seed crystals and stiring/agitation. Turned into a much bigger project than I expected at the time 😅

[@paulpease8254]

Time, money and ADHD is a heck of a combination 😂 Thanks for sharing.

[@paulpease8254]

Have you identified any factors that make it more or less likely that you will finish a project? For me, the biggest driver is usually achieving something novel. If I am struggling through a challenging project and it feels like I’m putting in a ton of effort just to make a worse version of something that’s been done before, I start to lose my motivation. But if I am working on a novel discovery or application, it really becomes a motivational driver for me. That, and a nice hard deadline 😂

[@stanstocker8858]

I bet you learned something slick with every one of these postponed or "overcome by events" projects. Happy New Year!

[@TaranovskiAlex]

Watched just the first minute so far - man, you do awesome job anyways, 99% of the startups fail, and that's OK! The main thing is to start doing things and try as much as you can to be consistent. Never feel bad is something doesn't work out as expected, many people don't even ever start...

[@Borgedesigns]

Im so envious of channels that can make good content out of projects that ultimately don't work, but I just cant bring myself to make a full video about a failed experiment

[@BreakingTaps]

Honestly that's one of the reason these projects all languished in my archive. Never felt like I could put together a video about any of them individually. But a big collection like this seemed interesting enough, and I'm pretty happy how it turned out. Would highly recommend as a way to turn some of those failed projects into content!

[@adrianinvents]

Thanks. I loved it. Showing the failures is so important. So much more inspiring than just the success.

[@Tattlebot]

I was reading about nanostructure eyeglass lenses. The hydrophobic sample worked well in rejecting droplets, but it would rapidly fog with condensation. Counterintuitively, the hydrophilic sample worked best, it dissipated both droplets and condensation into the the nanostructure, eliminating liquid lensing.

[@sevendesign1805]

The world doesn't know how lucky it is to have you on it!

[@lumotroph]

Wow. These are amazing. And great format! I really like the cutting room floor style. Inspirational work 😊

[@Sokol_]

Thank you for all of your work and sharing it with us.

[@lordsqueak]

When doing projects on your own, knowing what doesn't work is probably more important, than knowing what does work.

[@adelinyoungmark1929]

that ultrafast sintering sounds quite interesting, especially since it can get to such temperatures so quickly.

[@BreakingTaps]

It's a really cool technique! And such a simple setup too... if I was being less cheap, a simple glovebox with inert gas would be pretty easy to knock together. I just didn't want to pay for the argon 😁

[@dandan-gf4jk]

@@BreakingTaps Can you shed some more light on that carbon felt? Is that the same thing as those carbon filters for solder fume extractors?

[@Molb0rg]

Nice overview, interesting on its own Vote for ceramic sintering

[@denysvisser]

Great work. Cool to see the path the unfinished projects put you on. Sometimes I wondered how you came to you next project. The micro thruster looks so cool! It out be visually fun as well.

[@TaranovskiAlex]

19! 19 projects! I wish I had so much mental energy for things like that...

[@dav1dsm1th]

I find all your videos extremely interesting - and look forward to seeing any progress on these unfinished projects (or anything else that gets your attention). I can't help thinking that a collaboration between you and Ben, over at Applied Science, would create some amazing content. I live in hope 🙂

[@ericlotze7724]

I guess I’ll put them all in one comment, because i fear KZbin might freak out over me spamming like 5 comments or something lol, but ANYWHO, here are the ones i *really* liked (they all were awesome, but some are things i would work on if i had the capability, or are adjacent to them) so ANYWHO here goes: 1.) The VAST Project I love the concept of this and would love to see it progress. Although if you want something similar, i saw this one system that just gazed at the sky and would document asteroids. Something similar could be neat, and *being in Florida and seeing a really cool lightning storm* i think using the data feed for lightning strikes/weather overall would be neat too. Basically make a thing like that, make it inexpensive (at least as much as possible, can’t make CMOS from hot glue and popsicle sticks, despite what some on KZbin say lol), and open source it, then have a bunch of people replicate it and get *data*. Making that a module and then adding more telescope modules could be a thing too! 2.) Nanodiamonds Recently I’ve been looking into Diamond Materials and “Diamond Like Carbon”. Both of these are made typically via Chemical Vapor Deposition (although some use the Plasma Assisted kind). CVD Diamonds can even get to Optical Quality, but coating knifes etc with that would be neat on it’s own! Diamond Like Carbon is neat in that it is the best of Diamond and Graphite to an extent. I have read up on this a bit, but haven’t gotten into the “nitty gritty” of the Protocols yet (so this may be deceptively simple like some of these projects), BUT between you, “Applied Science” , and “The Thought Emporium” ‘s work (et al lol, rip to anyone I forgot to mention) there seem to be many good OS/DIY methods for making Sputtering/CVD Machines. So i think it is less of a technical leap, and moreso a *read papers and fiddle with hellish protocol issues*, but if you could do this you could make crazy sharp stuff, insane thermal pads/heat exchange stuff, coat parts like piston rings in internal combustion engines (or just a top/euler’s disk), and *maybe* even make optical grade diamond!, all with mainly just Electricity and/or Methane (Natural Gas, Upgraded Biogas, etc) 3.) Ceramic SLA There was a video by Integza a while back where he made a 3D Printed Catalyst Block for a Hydrogen Peroxide Decomposition Monopropellant Rocket Engine using Potassium Permagnate as a Catalyst, BUT mixing it into the resin (or doping the sintered ceramic afterwards, i forget!) This REALLY peaked my interest for small scale Syngas to Chemicals processes (Make Methanol, Make Dimethyl Ether, maybe Butanol, or even Crazy Methanol-to-Olefins or Fisher Troph type stuff), or even crazy stuff like Hydrogen Methanation, Solid Oxide Fuel Cells / Reformers for PEM Fuel Cells (aka run a PEM on Standard Gasoline or JP-5 etc) If you could have home (or more likely homestead/makerspace level) Power-To-X tech, that would be game changing. No need for (at least as many) batteries for off grid power/transit when you can store methane, methanol, or DME made from electrolyzed water hydrogen, and maybe even make more complex chemicals? This could also allow for small biorefineries using Synngas from Woodchips or Algae etc. *TLDR: Ceramic 3D Printing + Non-Noble Metal Catalysts/Maybe even Solid Acid/Biological Catalysts + Hydrogen / Syngas = Awesomeness!* 4.) Focus Stacking 3D Profilometry Just…YES PLEASE! Between Good (Trinocular) Optical Microscopes, your Atomic Force Microscope, the various DIY/OS (or just cheap used, or that one you reviewed) Electron Beam Microscopes, DIY/OS Universal Testing Machines, DIY/OS Spectrometers, and something like THIS (and/or an Industrial CT Scanner), *You could make one HELL of a (Nano-) Materials Science /Quality Control Lab* in a Makerspace, or just smaller University! Would be an AMAZING addition to that “Walmart Sized Makerspace” idea i have been plotting for some far off day. KDP Crystals: Appropriate Materials Optics sounds really neat. I am not too well read on optics yet, but that combined with Gas/Dye Lasers could lead to Fiber Laser+ level (pulsed) power with appropriate materials, right? 5.) Ultrafast Sintering Even if not Ultrafast, having a kiln using just *glorified charcoal* and an inert gas would be super neat! Could you even use that “carbon foam” (aka carbonized bread) as (part of) the insulation? Either way short of Shield Gas/Electricity Costs, *That Seems like a Cheap Method, using Appropriate Materials that could so some very neat High Temperature Stuff* Conclusion: PHEW, sorry for the wordwall, but thanks for reading, and more importantly THANKS FOR SHARING ALL THIS WITH US! Posting the failures may be less exciting than well done projects, and may even get less views etc, but this stuff is important, and helps on an inspiration/science side a bunch. Keep up the great work!

[@sosaysthecaptain5580]

I built a reasonably successful focus stacking profilometer a few years ago. It produced a ton of erroneous noise, and I had issues getting illumination even, but overall not terrible. I used openCV for focus detection

[@TheBookDoctor]

It is not the failures, nor even the breadth of endeavors that marks your level of technical skill, but rather that you've tried all this crazy stuff and are _still alive_.

[@LuxGamer16]

I'm in a group for ECM, where we print mandrels to rifle and chamber a stock of metal (42cr and similar). Theres a dude that is currently working on a EDM apparatus that has xyz control with a hole accuracy of 0.1-0.05mm. Still early prototype, but very impressive

[@maz3808]

There's an interesting paper published in SPIE Journal of Photonics for Energy. It details a simple DIY radiative cooling design that can could prove useful in solar energy projects or thermal reflectance. The paper titled "Do-it-yourself radiative cooler as a radiative cooling standard and cooling component for device design"

[@thedamnone]

Research and innovation is the art of gathering data from failures.

[@mattheww9656]

3:58 Designing and printing chess pieces - gifting sets as gifts. I’ve found my use case for 3D printing.

[@tomblough3257]

Joanna Aizenberg's group at Harvard has done a lot with super hydrophobic surfaces. The porous surface texture is used to retain a fluorocarbon like Krytox, which then results in the hydrophobic surface.

[@andrejradulovic5666]

Your videos are so great, enjoying watching them, it is so relaxing, keep doing them! Do the video about failure projects too, there is no grades on youtube :D Lots of people do not have chance to do experiments, including my self, so by watching your videos it is like we are doing them, so including failures will be even better experience...

[@Choscura]

on the ECM thing, I can comment that the people doing some of the 3d printed gun stuff have figured out that you want to minimize surface area of electrode in contact with work piece, and run the discharge voltage in pulses, and you'll need to experiment with your setup to figure out the ideal hz rate for the pulses. people are starting to experiment with this to drill holes for barrel, besides the ECM rifling process that's out there. (yes there's how-to's on rifling a barrel with ECM, on Odysee.)

[@latentdiscourse4357]

Recently I tried drilling and tapping a ball screw nut but kept breaking the taps I have. Couldn’t help but always think of your KZbin!

[@StormBurnX]

The ceramic SLS is interesting because at least one company has been making off-the-shelf ceramic resin for... at least a few years now? @Integza has been using it to make miniature rocket engine chambers, nozzles, etc, it's quite fascinating!

[@asmotaku]

Oooh... A little treasure trove you got there ! 🤩 Nice !

[@asmotaku]

@BreakingTaps5 Well color me NOT convinced. 😅

[@mitchstilborn]

Definitely want to see the VAST completed

[@Veptis]

I hope this becomes a (bi) annual roundup to showcase how many abandoned project don't make it in a year

[@jakobfindlay4136]

id like to hear more about the ceramic sla printing mainly because in curious about how you managed to increase the amount of ceramic in suspension and keep it suspended

[@DerekWoolverton]

Love that speedy sintering.

[@kevinm413]

This was an awesome video! Thank you for showing the forgotten projects that either fizzled out or led to different projects altogether! The breadth of physical and chemical processes that you attempt to replicate/learn about is truly impressive. I was especially excited to see experiments with 3D printing ceramic materials. My day job involves the end-use of bone grafts- some of them being ceramics (CaPO4, hydroxyapetite, and nano-scale silicates). There is a group out of Ukraine who (despite the war) have been developing 3D printed bone grafts that (because of macro and microstructure) have inherent biologic properties. I'm not sure what your "ex-biologist" background is, but you might find it interesting. Check out A.D.A.M. bioprinting.

[@samk2407]

I really really want to see the telescope. I'm super into astrophotography, and it'd be so cool to see a hobbyist project like that.

[@dewanpretorius]

Growning kdp crystals: Maybe you could somehow apply a charge to stop impurities from getting close or maybe even use it somehow to filter the mix beforehand? Super Hydrophobic coating: maybe make the coat thinner? Metal fdm printing: could an innert gas be used to fill the cube beforehand ( and maybe keep it free of oxygen after being printed), or to replace the in/ around the furnace? (making it work even if it's not a perfect vacuum). Hope this helps

[@dewanpretorius]

Oh and loved the video. Feels like there's so much to be learned from a failure (sometimes even more than a success).

[@lordsqueak]

Wow , that super hydrophilic method might be perfect for building heatpipes for cooling. Hmm, I wonder if you could make micro channels that sucks up water or some liquid, super heat it to produce a refillable, microthruster.

[@hullinstruments]

Would love to see your take on a DIY pulsed tea laser / tunable dye laser. I'm a big fan of the KZbin channel "Les's lab ".. But had never experimented with dye lasers until his videos motivated me to do so. I've built half a dozen or more now that actually have uses in my small lab. And would have never done it without the motivation from les. Would be incredible to see you tinker with some of that stuff and help bring more people into the hobby because of your wide reach.

[@BreakingTaps]

I'd like to at some point, but definitely have some more reading/learning to do! Only very basic knowledge of actually constructing lasers. But I'm also a big fan of Les's channel, have some of his dye laser videos bookmarked for future learning :)

[@Fordallas]

I wouldn't call these failures. As an industrial laser scientist, I'd stress the importance of shelving projects until new ideas/insights come along. Happens all the time at my employer, sometimes for decades at a time. I'll admit I'm now thinking about trying to making some KDP. BTW, I started using a 100 keV electon lithography machine a few days after your video :)

[@gavendb]

this guy's failed projects are more impressive than my successful ones...he's doing real stuff while i was busy making bad decisions on fast women.

[@hovant6666]

Yellow chemistry - a subtle Explosions & Fire shoutout

[@zebdeming]

Who are these people who finish projects? I only start them

[@edgeeffect]

I loved the old thumbnail with the "I'm such a failure" pose. ;)

[@BreakingTaps]

Hah, I was afraid it was a bit too dramatic (and inching towards a "youtuber face") 😄 I might switch it back, we'll see!

[@Danny.._]

the virtual foundry now sells filament for traditional 3d printers for sintering into ceramic, aluminum, copper, bronze, stainless steel, titanium, and borosilicate glass

[@Danny.._]

oh, i was saying this in response to the part about sla printing, but later in the video you mentioned metal fdm printing, so i guess you already know about it lol

[@BreakingTaps]

Haha yep! That filament was from Virtual Foundry (I should probably put a note in the comments about that). Grabbed a few different filaments I'd like to try out at some point. 17-4, borosillicate and another one I'm forgetting. Really excited to see how well they work with some tweaking!

[@apathyreview3964]

You're a classic ENFP personality type. Good starters poor finishers. I know this for a reason lol.

[@not_yet_implemented]

Very cool, your garage must be huge

[@bearnaff9387]

This was a neat video. If you eve get interested in the microrocketry again, try dropping an e-mail to Dr. Adam London, at Astra - an aerospace company. It's been a few decades, but when he was at MIT he was working on lithographic etching of a MEMS pump and engine for chip-scale liquid fueled rocketry. AFAIK, this did not result in a viable product, but I have to imagine that he is both interested in the subject and has stories/ideas/suggestions to share. (I do not know Dr. London, I just remembered his work at MIT.)

[@Zeuskabob1]

Very interesting video! It's really cool that you've given us a look into your various ideas that haven't panned out yet. I noticed that most of your projects seem to be "in-progress", and it seems that over the next while as your equipment gets more capable you might be able to return to some of them easily. One project I'm interested in is the microthruster. While a fascinating application of your expertise, it seems to lack the kind of propellant efficiency required for satellite deployment. Did you have a plan for how to remove the excess mass from your microthrusters so they'd be more space/fuel efficient?

[@besenyeim]

I like the last one. I hope it becomes a real video.

[@MartianGopnik]

Which software are you using for FEA at 7:41?

[@winsrrow8125]

the last one seems really cool to me

[@marcalmunozborras6769]

I think this is your most impressive video.

[@napalmholocaust9093]

Can you wrap the objects to foam sinter in stainless foil? Maybe drop a little bone black in there too?

[@BreakingTaps]

I think that would help! I picked up some activated carbon to use as ballast a while ago, and think there's a sealing issue on the furnace itself which was preventing a good vacuum. Hadn't thought about a stainless pouch, that's a great idea. I think I'll probably pick that project up at some point, could probably get it working with some more testing.

[@dirkvornholt2507]

The hydrophilic coating seems pretty interesting. Is there a link to a paper or any other further information on this topic available?

[@GTS00000]

Great video! Questions: (i) What software did you use to create the 3D images from the z-stacks? (ii) Those images of the complicated fixture, have you simulated that? (iii) Can you tell us more about the vacuum furnace used for dental applications?

[@DavidKennyNZL]

I'm interested in sintering of ceramics. Both the 3d printed and fast sintering.

[@paranoiia8]

I know that Ceramic SLA is a black hole but how about similar ideas, like adding different materials to resin print, like just go full chaotic and throw everything to resin and try to bake, boil, laser, sing, dance, flamethrow it and just see what came out :D

[@rockyrivermushrooms529]

Just found your channel and you have a ton of interesting videos.

[@HM-Projects]

thanks for sharing these, all of these sound like fun projects. perhaps you can revisit some of them later. off topic question, what's your day job and technical background ?

[@BreakingTaps]

Until a year or two ago I was a software engineer (distributed search analytics), with a background/degree in molecular and cellular biology 🙂 My career path has been pretty non-linear heh. At the moment I'm half-time bootstrapping a machine shop, and half-time doing YT.

[@HM-Projects]

@@BreakingTaps one of us, one of us. All the best with your shop endeavour.

[@ThomasAndersonbsf]

something to add to the list might be laser assisted vapor deposition LOL (if you are interested, you can contact me for the rest of my conversation on how to use it for 3D printing, that I had on tox, thus its not available on wikipedia or anywhere else. unlike the skype conversation that was reprinted almost word for word originally on the first rejected version of the wiki page on it.

[@davidtreibs]

Have you ever tried to make nano-thermite with a relatively low temperature igniter layer on each particle?

[@christopherleveck6835]

So are you going to revisit the telescope mirror project?

[@BreakingTaps]

Definitely! I actually left it off this list because it's pretty close to being finished, just need to make a new mold and do some filming. Hopefully soon! 🙂

[@christopherleveck6835]

@@BreakingTaps I have a metric buttload of inexpensive telescope kits I need to make for a non profit..... so get on it! I actually had a couple ideas too if you are interested.....

[@dekutree64]

Another cool electroplating project you could try replicating is from a guy on Hackaday named Michał (copy-paste that, the l is a special character with a little line through it). The project is called "Self-Created Metal Composites". He took a tangled mess of carbon fiber and electroplated it to bind the fibers together into a sturdy low-density structure. I tried it but the copper seemed to just collect as a fine powder on the carbon rather than binding together. But I'm no good with chemistry and it was my first time trying to electroplate anything so I'm sure I just didn't do it right. It sounds like a very useful technique, so showing it to your large audience would be great.

[@pyromen321]

5:25 that was my college nickname :(

[@furl_w]

For the hydrophobic coating maybe it's a charge thing