Version 2: How to Build a DIY 3 in 1 Crossfit Plyo Box with One Sheet of Plywood

We're making / showing you how to build a diy 3 in 1 crossfit plyometric jump box out of one sheet of plywood for your functional fitness. Save the $130 you'd give to Rogue, spend $30 on a sheet of plywood, and get some exercise while building your 3 in 1 plyo jump box. if this build seems to complex go ahead and check out verions 1: • How to Build a DIY 3 i...
Cut Sheet Google Doc: drive.google.com/file/d/1LETd...
Screws: amzn.to/2Sw0TCv
Countersink Bits: amzn.to/2VXl8LJ
Kreg Tool: amzn.to/2VUNNRw
Hole Saw: amzn.to/2VUNTZo
Glue Bottle: amzn.to/3cQBsoH
My Gear:
Camera amzn.to/2taS0o1
Mic amzn.to/2rIflx6
Grill amzn.to/2RO7GYP
Thermapen amzn.to/35CLqUR
Black Nitrile Gloves amzn.to/2PKMRur
Gimbal amzn.to/2YLQx3x
Tripod amzn.to/2PHaZy7
Editing software amzn.to/2yv3rtf

[@RookieMistakeYT]

Thank you so much for this. As a coach and trainer that trains mostly inner city athletes I end up not charging a lot of them because I know the money just isn’t in the household. Buying equipment gets so, so expensive. Videos like this make doing what I do possible!

[@killiancabrera9697]

You know what would be really helpful? Actually saying WHAT PIECES you're then using to assemble the final thing. Having a tripod a foot away doesn't explain much.

[@GMax17]

Do a version 3: where you can use the inside of the box for storage

[@STBRetired1]

It IS nice to build things yourself. But since this video was made, 3/4" cheapie plywood is costing $ 45 to $ 50 per sheet. Plus, if you don't have all the tools and expertise to cut, glue and screw then this 23 minute video will take about three days to construct a box for an average person. OR, you can buy on Amazon a precut and predrilled box for around $ 90 to $ 95 and assemble it yourself in an hour or less. I see the Garage Fit box has interlocking puzzle joints as does the Amazon Basics box for added strength and support.

[@jamest935]

A 4 by 8 piece of plywood at 3/4 inch thickness right now is more expensive than just buying a box from rogue..

[@johnnyrobert7983]

Be good to show which boards are what sides ie end board 24x28 etc and also show what goes 1st 2nd etc. You just build the box w/o what sides go next.

[@marcopineda._]

This was an awesome video. Thank you. Unfortunately HomeDepot refused to cut the wood for me so I’m stuck for a bit.

[@lohdal]

Nice job on improving Version 1. If you want to make your box even more stable you can do so by "Jigsaw" connecting all of the sides so that all sides of your box are supported on 4 sides. This does though take considerable more work to do and you will need to venture into precision cuts, either with a Jigsaw or a Circular Saw. I have just finished my box using a mini Circular Saw for the cutouts.

[@logandouglas1466]

Made this today. Turned out great and super sturdy. Probably just going to add a polyurathane coat to smooth it out and help it last. Thanks for the video!

[@LongTTH]

the fix to get every side of the box supported by 2 sides is so perfect, thanks

[@michaelkenny9027]

Thank you. Love the dog with his toy. Mine would be doing the exact same thing. GSD's are great.

[@vmjcross]

11:00

[@luisbecerra8128]

WOW! Thank you so much! This is awesome and so much cheaper if you already have the tools!

[@davesmulders3931]

Great idea to reinforce the box this way. You could also just make version #1, then glue some 1 inch wide offcut strips to the inside so that both ends of the offcut strip touch either 'screw-supported' panel. Would take around 2 to 3 strips per panel for plenty of support. Add some short screws to hold while the glue sets.

[@planetpainter]

Made this today! Thanks plans worked perfectly. Had to sand the edges a bit but altogether a great plan. Very sturdy!

[@BenjaminBriu]

I’m making it from here!! Thanks so much!!

[@GCAT01Living]

Just started to get into woodworking and also fitness so this is PERFECT! Thank you for providing a cut sheet! Can't wait to make this.

[@bobbyLovesTech]

Thank you for this but please don't ignore your gorgeous dog lol

[@4rocksteady440]

This plan worked great for me. Thanks!

[@combatbaseflint9786]

Thank you