Brembos and Blazer Spindles G Body

I build a bracket out of 3/8 plate to mount a CTS-V Brembo caliper and C6 Z06 Corvette 14" rotor on a blazer hub and spindle for a G-Body. Dimensions for the bracket are given in video.

[@MrXerxes415]

This is nice and exceedingly well done extremely informative to the person who has never made a before. Now anyone can think their way through a similar process I had or idea where to start.

[@veltboy314]

I want to make sure these calipers will fit with my wheels before I try to do this so I wanted to see if you could get one measurement for me. I need the measurement from the rotor face out to the edge of the caliper.

[@leopestano4877]

very impressive! great work you make it look very easy.

[@walterkrupa454]

e-bay s10 blazerspindle brake swap

[@ajracing6631]

Kor3 makes the caliper bracket for the blazer spindle

[@bryanshedd3927]

For the Blazer drop spindles?

[@RonsCustomWhips]

Do have any brackets for sale

[@cliffjamerson3107]

Hell yea brother

[@Wbroach24]

I know this is oldish but, The 98 Blazer is an S10 Blazer so the S10 spindle Bracket for Brembos should work I would think. Edit: I forgot it was a drop spindle but i still think if they have it for a 2wd S10 truck it would still work

[@savagepickle0443]

You are probably right however the 2wd blazer spindle after a certain year is drastically different from the s10 pickup spindles and they don’t allow bigger than stock brakes unless you cut away a lot of the spindle which is why these blazer ones are such a popular choice for big brake kits

[@jeremypestano4076]

very informative stuff thank you Yeti Garage. I have a question I have an 84 vette can I used this parts for that particular application?

[@yetigarage1134]

I don't think so, but I've never worked with c4 corvette brakes

[@gbodyrush]

Nice work

[@yetigarage1134]

Thanks

[@My0186]

Clean set...

[@7milekyle986]

Would u happen to have a part number for those allen heads that you used to mount the caliper to the bracket as well as the part number for the rotors?And great work as well💯💯

[@yetigarage1134]

It's been a while since I did this. I think the bolts came from the hardware store and the rotors are off 2006-13 zo6 corvette. I don't know the part number, sorry. Thanks for the comment

[@ronaldsimpson3212]

Can you make those brembo brackets for me , I have blazer spindles with 2015 Chevy brembo calipers

[@montrellhorton3061]

How much would u charge to make me a bracket like this and ship it to me?

[@yetigarage1134]

Sorry, I don't make parts. Thanks for the comment

[@DesTakeFlight]

Good content 👍👍

[@yetigarage1134]

Thank you 👍

[@Blktpcrzrs]

You used 3/8" plate? No spacers?

[@yetigarage1134]

It's really close with no spacers. I might run a really thin washer to get it perfectly centered.

[@bluemalibu1742]

? 2012 ctsv disc rotors can I use instead of corvette. Do the ctsv rotors won't fit?

[@yetigarage1134]

I'm not sure, I've never looked at cts-v rotors

[@bighead85ss]

What size wheels will clear this setup?

[@yetigarage1134]

I'm running 20's, not sure if smaller will clear

[@ARDIECARPENTER]

The rotor/ caliper combo 18inch clear, oem on the ast gen cts v but probably not all 18s

[@jermaineknowles87]

CPP c5 gbody spindle is so much cleaner and easier

[@dogghouseent.donmega2828]

HEY, WHAT KINDA ROTORS DID U USE?

[@yetigarage1134]

AC Delco 2006 z06 Corvette

[@apacheone3643]

I do not care for your bracket were the taper holes are it looks like you could of cut those brackets a little wider to accommodate the taper bolt better. Also I do not think grinding the spindle down so much in that area to 1/4 inch was a good idea as Cast iron is not as strong as cold/ hot roll steel. Especially Ductile Cast. I think you created a weak spot.

[@marloauto3937]

will you sale any of these

[@yetigarage1134]

No, sorry, I don't sell parts. I tried to give enough dimensions that you could make your own.

[@TRAEDA12]

Hey, how much for