Brent0331 Painting your Weapon & Gear

[@Brent0331]

**Guys, Primary Arms is hooking up my subscribers! If you want to get FREE shipping and a free gift such as a FREE or discounted (depending on which scope) scope mount for the variable scopes, or a free anti-reflection device for the prisms optics, just follow the links I have posted below on the scope of your choice. YOU MUST follow these links or you will not get the free or discounted mount/anti-reflection device and free shipping from the standard Primary Arms website.** PA CYCLOPS 1X PRISM (BLACK): bit.ly/2BREKZn PA CYCLOPS 1X PRISM (COYOTE/FDE): bit.ly/2BRfhiX PA Advanced Micro Dot w/ push button: bit.ly/2LX39Nd PA Advanced Micro Dot w/ rotary knob bit.ly/2CjTCjr PA Micro dot (Budget red dot) bit.ly/2Ci99k3 Holosun HS503G RDS W/ ACSS bit.ly/2r7gCd3 PA 3X Magnifier bit.ly/2r3XAV2 GG&G flip to side magnifier mount: bit.ly/2EN5uv3 PA 1-6X24 FFP ACSS RAPTOR 5.56 / 5.45 / .308 BLACK bit.ly/2jW0V4O PA-1-6X24 FFP ACSS RAPTOR 5.56 / 5.45 / .308 WOLF GRAY bit.ly/2IidvtX PA 1-6 FFP ACSS RAPTOR 7.62x39 / 300 Blk out bit.ly/2IIAnC5 PA 1-8 PLATINUM FFP RAPTOR 5.56 bit.ly/2zqXYBo PA 3X Compact Prsim Scope ACSS 5.56 GEN II (Black) bit.ly/2OzAQqA PA 3X Compact Prism Scope ACSS 5.56 GEN II (Coyote) bit.ly/2OAEekN PA 3X Compact Prism Scope ACSS 7.62x39/300 Blkout GEN II (Black) bit.ly/2KdtaXD PA 3X Compact Prism Scope ACSS 7.62x39/300 Blkout GEN II (Coyote) bit.ly/2n3AgVv PA 1-8X Scope with Patented ACSS 5.56 / 5.45 / .308 Reticle bit.ly/2SPbNob PA 1-6X24mm SFP Riflescope with Patented ACSS 5.56 / 5.45 / .308 Reticle Gen III bit.ly/2BD73bB PA 1-6X24mm SFP Riflescope Gen III with K.I.S.S. Reticle bit.ly/2SUbxEo PA 1-6X24mm SFP Riflescope with Patented ACSS 22LR Reticle bit.ly/2N8fj7P PA 1-6X24mm SFP scope w/ACSS 300BLK/ 7.62X39 Reticle bit.ly/2N6Qut9 PA 1-6X24mm SFP Riflescope Gen III with Patented ACSS 22LR Reticle bit.ly/2N8fj7P Trijicon ACOG TA31 4x32 Scope with RED Dual Illumination ACSS Reticle TA31-R-ACSS bit.ly/2EQIMhg Trijicon ACOG TA31 4X32 Scope with RED Dual Illuminated ACSS AURORA RECTICE bit.ly/2T6uZuz Trijicon ACOG TA31 4X32 Scope with GREEN Dual Illuminated ACSS AURORA RECTICE bit.ly/2FRTmIQ Trijicon TA44 ACOG 1.5X16S TALL BASE (GREEN ACSS reticle) bit.ly/2DkC72H Trijicon TA44 ACOG 1.5X16S TALL BASE (RED ACSS reticle) bit.ly/2rdEu1O Trijicon TA44 ACOG 1.5X16S SHORT BASE (GREEN ACSS reticle) bit.ly/2EQge7G Trijicon TA44 ACOG 1.5X16S SHORT BASE (RED ACSS reticle) bit.ly/2FMdLMO BIG THANKS to Dimitri and Primary Arms for making this all possible! Also don’t forget to check out and subscribe to Bruce’s channel: kzbin.info/door/wfzznRRdLUHwKiMTND49Jg Also check out my buddy John who is the owner of UW Gear and his KZbin channel at Alpha Charlie concepts: kzbin.info

[@kirbymoffatt2251]

The paint doesn't interfere with fwd assist plunger, Delta ring or threads at castle nut?

[@dkow2503]

It's an old video and I don't know if you read this, but have you ever tested spray painted gear for its IR abilities? I think it would be worth it to make a video on this. A lot of people buy the old ACU/UCP uniforms and gear and dye and paint it. It's not so bad if you use it for airsoft or outdoor activities, but if used in combat this could turn into a bad situation.

[@JohnDoeEagle1]

I buy a lot from both Primary Arms and RightToBear.com as they have excellent prices and a great selection.

[@bwana3006]

Brent0331 great sound effects i thought you might be gettin raided

[@starcoloneldunadansonoft501]

I run a Primary Arms 3x ACSS on my 20" A2. It mounts right to my carry handle and I didn't have to change my cheek weld a bit. It's a great optic.

[@unmalo2768]

Don't stop or start your stream of paint on the object you are painting, that will cause a large build up of paint, and runs at the point where you start and stop your spray stream. Start spraying off the edges of the object, then move across the entire object and stop the spray stream once you are clear of the object. You will get a more even professional look

[@NayokeHenji]

thank you for this tip

[@toriwilliams500]

Any videos on this technique

[@TheFrog767]

And warm the paint can up in hot water for a few minutes the paint will flow better and you will get every bit out .

[@johnb.6468]

Good advice for taking a piss too

[@MrCobb-rq8iv]

Hold back 18" what do you mean run? Wow put it on dry. And all that taping, waste of time, clean aim points and other features with cotton-swab and brake clean. And tape the inside of the muzzle? You got to be shitting me. Paint it all and don't look back, never had a malfunction M14, 1911 or bolt gun. YMMV

[@79dogface]

When the shit hits the fan I’ll be running around in blue jeans and a t shirt with a camouflage rifle

[@scottkapalin9121]

Lmao

[@Joachim1167]

Well, at least they'll think you're only running around with a small tree branch...

[@chcowboy5410]

Same😂😂😂😂

[@crashburn821]

Won't be able to find gun!

[@VietnamWarSummarized]

@@Joachim1167 lol

[@Cogzed]

Cheap dollar store laundry bag works for the snakeskin look also.

[@bwana3006]

Cogzed good idea i’m lookin manana

[@inhoosier144]

That’s what I used and it works great.

[@chatu-aries8417]

99 cent store sells fiber tape for dry wall makes a great stencil for micro patterns

[@jmmartin7766]

@@inhoosier144 Me too 😎👍

[@Xanatos712]

Instead of using stencils, I find local vegetation works just as well if not better. Start with a green/brown base layer (or combination) and cover your gear in leaves, twigs and other debris. Then go over the whole thing again with tan and you'll have vegetative silhouettes on your gear.

[@americathefree3708]

Just don't put that shit on my pizza!!!!UGH!

[@sickboy3636]

@The Last Emperor....The truth is you're insecure about your life because your father had nothing to do with you. You fill that void by trying to get attention on youtube comment sections. To be honest, its pretty sad that the damaged relationship with your father has resulted in such a sad soured existence. I feel bad for you.

[@sickboy3636]

@The Last Emperor....Its clear that post affected you, or you wouldn't have bothered writing back. I hope you can start to analyze the things you do and your blatant insecurities.....its the only way you'll actually be able to deal them. Otherwise you'll be 40 years old and begging to be noticed on youtube comment sections to get the attention you so desperately need. #truth

[@randommandoade1465]

I live in Nevada's Mojove Desert so what plants do I use.

[@TJackson736]

Tumbleweed

[@nicholasquintero1080]

Hey Brett big fan of the channel. If I can offer a painter's tip...on the rifle you can make the paint last indefinitely if before you spray the paint, wipe down all of the metal with alcohol. Denatured alcohol is recommended but isopropyl also works. After, krylon makes an ultra matte, enamel based clear. Spray a couple coats over the camo to take away the gritty feeling from the pigment and seal for a long lasting finish. For the web gear, if you use silicone spray like kiwi camp dry before you spray paint, and also seal with a light coating of the same clear coat it won't soak the paint up and your gear will be more water resistant than before. Also to save labor, it's quicker to use the 2" roll of masking tape and just tear out random patterns and stick directly to the project. Those are the procedures I use for the same tasks.

[@dirtycommtroop]

Dude i've seen a lot of videos on camo jobs and this is probably my favorite. It really doesn't take much to get great results.

[@Brent0331]

Thanks brother, hope it helps.

[@MrLegacy36]

arts and crafts time for the "tactically ready"

[@americathefree3708]

YAY!

[@opalprestonshirley1700]

Nicely done. Effective and inexpensive. Thanks

[@Brent0331]

I appreciate it.

[@StevenTheAristolianNerd]

Now folks remember that you use colors according to your field of operations. You could look in the environment around you to help. Maybe and oak leaf or pine needles. To spray paint over. To break up the basic look and outline of the rifle to help it to blend in or be less noticeable. Brent you did a fantastic job.

[@Brent0331]

Thanks man.

[@edwardnelson3304]

Thanks for your Service to this great Nation. Thank you for sharing your experience and knowledge, Blessings to you and your family.

[@Brent0331]

Thanks brother, I appreciate it.

[@LtNoogie673]

I painted my LBE this weekend and was surprised how much light color paint was required break up the outline. All of those darker colors like forest green, black and brown look great up close but as you back up they become one dark blob.

[@rjohnson1690]

I finally got around painting my DPMS AR. I painted a tan underlay with light green and OD over spray and some sparing brown spots to break up some of the high points. I used a torn piece of ACE hardware bag to get some jagged fades. When I was finished I painted the shiny black GI issue sling for a great result. Then I went and painted some shorts I had made from some UCP pants. I really liked the effect of the overspray on that useless UCP pattern!

[@justsomeguy3931]

This was very helpful, when my gear is squared away and tested so I'm sure of it's final form, the last step is to paint it. Thanks for the info as always

[@hornfarrierservice9526]

Semper Fi, Brother. I remember in boot camp when the recruits would try to put perfect camo patterns on their face. The Heavy would freak out and make them smear it into a green blob mess. Ok, I confess...I was that recruit. Great video. Loved your M1a video too. Keep it up.

[@Brent0331]

Thanks brother, I appreciate it. S/F!

[@ironsights1809]

Another awesome video like always! Brent0331, you seriously are my favorite you-tuber. Keep it up!

[@Brent0331]

Thanks brother.

[@thedoorguycharlie]

Good job on the rifle!!! I just did camo on red and purple camelback backpacks. Didn't wanna look like Prince running around in the woods with the CSM. The Bride found some fabric spray paint.. Ya, what??? Covered really well. Had no clue. Did random sprays and finished off with a small leafy branch. Thank you for all your efforts. Love the channel.

[@oleksandrshulvinsky7812]

Fast, cheap, effective. It can be easily adopted to changing eviroment (repainted). The best way to get it done in my view. Thanks for the video.

That is actually awesome that looks great thank you for the ideas and is thinking outside the box a little bit use in different things to use as your camo design

[@Brent0331]

Thanks.

[@hawaiivolcanosquad3322]

Good final camo result. I add a dull matte coat at the end to cut down glinting or glare. I think it might slightly help with that, and adds life to paint job.

[@IrishUSMCVet]

I use rust-oleum camouflage 2x ultra cover spray, no reflrctive,ultra flat color and bonds to plastic.

[@hawaiivolcanosquad3322]

It's all personal preference but I found that, with Krylon camo paint, the dull flat matte renders the camo paint even flatter and duller, plus it evens out the overall paint job, since you have layers of paint sitting on paint. I have not tested the clear dull matte with Rustoleum however.

[@IrishUSMCVet]

I use a clear that is sprayed on with an hvlp touch up gun and it gives a rubber matte finish. It's badass.

[@mannox775]

@@IrishUSMCVet rust oleum is good no smudge or scratch works well I do milsim coz I'm 15

[@IrishUSMCVet]

@@mannox775 its great option, I usually ceracote them and then you can spray over the base coat with whatever color you want. However, not everyone can afford cerakote so this is a viable option. And who cares? There meant to be used, and airsoft is already expensive so rattle can it with pride!

[@steved3413]

I like Od, grey and brown. I tiger stripe all my hunting gear like my treestand with it. The grey gives it a shadow effect. It looks sort of like ATACS camo when im through and its effective. Im going to do my AR like that eventually.

[@ilovethatkatielovesclassic8771]

damn that's a mean looking paint job Brent

[@Brent0331]

Thanks brother.

[@tylerfrost77]

So I thought Id give it a go myself, I used my pellet gun first. Instead of a synthetic mesh I used sheets of burlap to create the grid like pattern. I would highly recommend using burlap, it came out very organic and natural looking, created a sort of distortion at any range longer the 20'. I wish I could post a pic here.

[@Brent0331]

+Tyler Berthiaume Good deal man.

[@ButtonJockey]

I like your videos. I learned to spray in passes over your work starting to spray before the pass goes over the work and not to stop spraying until you are no longer over your work. This technique reduces runs and drips, if that's a concern. Thank you for your service and time.

[@JohnWicksPencil14]

Paint a base coat then use foliage from around your house and apply it right to your firearm and paint over

[@bmxgeneral]

Yes! Now THIS is an awesome looking three tone paint job for a rifle!

[@marjamada]

Nicely done. I started using spray-through stencils about ten years ago on an AK, starting with tan as well, and it suits the desert just fine. I hung the AK with matching mag in a bush and could not see it from 20 feet away. I've watched many videos where sponges are used to dab spray paint on - not bad, some look really good. But the stick on shapes never grabbed me - looks okay but lots of work. I also think the sharp edges are too sharp. Spraying through cutouts you can blur edges. I also found that spraying dark brown from a distance tones down bright tan spots by 'dusting' small droplets and blending edges.

[@genemichael2359]

Simple, easy, beautiful. I love it, Thanks!

[@Brent0331]

Thanks for watching.

[@EquipaPatriot]

Applying an adhesion promoter/primer before spraying the base coat will keep the paint on longer.

[@hrdknox2000]

Hey, Brent! I just wanted to say thank you for this video. I used it to paint my new AR build on Christmas eve. It looks great!

[@Brent0331]

Awesome brother, glad to hear.

[@AlphaChimpEnergy]

I treat all my leather and cloth with bees wax. I buy it in cubes for a few bucks and hit it with a heat gun and apply it to the material. It gives it a nice feel on your skin, a level of water resistance and I’ve noticed that all the clinger burs and thorns are less likely to stick to it.

[@beavisroadhog9629]

Hey! I like strawberry jam! I eat it on toast.

[@craigpalmer9196]

I hang mine and paint both sides at once

[@TX.RigWelder33]

Me too

[@csiipahoa2857]

This works as well.... Take a leave/ foliage and use it as your stencil... works great

[@Frank_horrgian]

Great tutorial that upper receiver camo out looking amazing. That sniper vail really adds the detail on that spray paint.

[@tom_olofsson]

Best rifle painting video ever. Thanks for sharing.

[@johnwayne6501]

I'm back...well..I did it...painted my firearm and it turn out super good! A friend of mine Son who just got out of the Marines 3 weeks prior even complimented it. Thanks bud.

[@Brent0331]

+john wayne Awesome brother, glad to hear.

[@RHarry]

Nice job. I'm surprised that paint would hold up from the heat of that barrel. learn something know everyday. thanks for sharing

[@pd2210]

To support Brent; I too painted my AR about 2 years ago using the same technique and it only has some minor wear as Brent said. My AR paint job turned out looking like ATACS AU. That was definitely luck. Not my intention.

[@TheFacelessMan82]

Simple, cheap, effective and looks great.

[@Brent0331]

Thanks

[@homefront3162]

I painted my wife, now I cant find her!!

[@cheetajoe4912]

Homefront Now how am I supposed to find her?

[@Bull_10RR]

lucky you!

[@EddieOakes]

lol

[@geomondiale1768]

Maybe she doesn't want to be found

[@baybornbalkanbaby7277]

If only that worked.

[@123andme]

Your technique is one of the best I've seen on KZbin for traditional camo. Good job. I think im going to borrow this for my shotgun stock and forend.

[@fromthebottomup3106]

I spray paint every firearm I own....glad to see I'm not the only one....I personally use real vegetation to get the breakup I'm looking for....pine tops work great...keep up the good work troop....

[@Brent0331]

+Marcus Tankersley Thanks

[@johnnypea5369]

I like the way you did the stencils

[@Brent0331]

+Johnny Pea Thanks, Some of the patterns on the stencils I traced over some of the stripe in Tiger stripe patterns.

[@clydegreen3028]

THANKS MAN! I've seen a few of these vids and wasn't geeked over the finished product but this one I like. Figures it would be a 31 brother! (I'm an old 0331 WPNS 3/6 and my grandson is currently a 31 at MCAGCC 29 Palms) Semper Fi

[@Brent0331]

Semper Fi my brother.

[@aaronpeet9613]

Man I've watched 10+ hours of ar paint jobs. Found one other person with a solid technique. So I'll be running off ur ideas this coming Monday. Got a new ar arriving going to make it look like Florida pine land. Watched ur video couple times and devised my own how to. Long as breaks up the firearm and fits my surrounding I'll be happy. Keep up the vids. Me and my daughter have contests on who can find u in ur camo effective vids. She says its unfair cause I've had training lmao.

[@Brent0331]

Aaron Peet Appreciate it man. Glad I could help.

[@captaincullencombatsports]

This looks effective! I like the use of the stencil paper - it looks like you traced some shapes from an ERDL pattern. Good idea!

[@giuseppe_M]

I found that once you put down the base coat color ,you let that dry. grab some foliage whether it be a stem of a fern or whether any other kind of you know detailed foliage of your area just hold it up to the random areas and paint over the stem and leaves in different spots until it gets saturated and throw it away and then use a different branch of a different plant that way you have the native plants and foliage in the camouflage the colors you can mix them up

[@JohnWicksPencil14]

Nice job, I personally like to use foliage from around the house after my base coat. Makes for a nice breakup in color and adds character. And most importantly, it looks cool.

[@kentuckyjustice1408]

I don't have a sniper veil, but I've used "dollar store" laundry bags to obtain that desired texture. I have also used shapes cut out of Frog Tape (doesn't damage previous colors, and doesn't allow "bleeding"). The sky is the limit. I say, use whatever works for you. There's really no wrong way to go, unless it turns out like a train wreck.

[@jessewilliamson6596]

Man, this video helped me out. I like the cammo. Cheap, simple, effective. Thanks for video!

[@shootscoot883]

Love the vid I used one of my old mesh laundry bags from the army to get the desired pattern the vids are amazing keep it up

[@bobsickinger6017]

Outstanding video..will definitely do my AR this way!!! My only regret is that I didn't find this video for 6 years!!!

[@Solly-ow4od]

Thanks man. I totally overlooked that your Ergo grip wasn't painted and that your adjustment knobs were. Probably won't even mess with the pistol grip when I do this. Thanks for the help Brent!

[@Brent0331]

No problem.

[@jimgam730]

Nice paint job. You can also use slotted leaf guards like you get at your local home center

[@worldtravel101]

good stuff bro. i like that you dont make it overly complicated.

[@Brent0331]

Thanks brother.

[@wvtrooper1615]

Hey Brent0331! Great job on the videos! Too many on here don't take the combat arts seriously enough and you sure ain't that guy! Keep 'em coming. Thank you for your service...Semper Fi!

[@Brent0331]

Thanks

[@DannyWalker1949]

I like your way of painting the best out of all the ones I've seen on UT. I see you are in the same type of country & terrain that I am (over here in East Texas). Thanks for your video.

[@RTAlabama]

I like using the net - very cool!!

[@Brent0331]

Yup, it does a good job.

[@Quadflash]

Looks like a good way to camo most anything. Thanks for the useful video

[@Brent0331]

Thanks for watching and commenting.

[@likeamike]

great job Brent, I watched a bunch of videos and still went back to watch yours a couple more times! Thanks for the tips brother, keep up the great videos! !

[@Brent0331]

+Joe Malanson I appreciate it.

[@matttravis1018]

The federal Q in the background makes me happy.

[@Tmac327]

im gonna have to try this! nice to see how well the paint held up to wear. once again, great video!

[@TheShadowIsMine]

the issued laundry bags work real good for grid painting, really good diamond type grid.

[@johnwayne6501]

I wished I could share my paint job on this page...it turn out so well. Thank to your video because before I never knew you could paint your rifle like this.

[@Brent0331]

Good deal brother, glad to hear.

[@jdjerew7563]

A+ So many people forget what the purpose of this project is, to camouflage the weapon, remove the black. Again, A+ video, demo.

[@Brent0331]

+Joshua Jerew Thanks brother.

[@samueltwigg2882]

I absolutely love your videos Brent0331! My airsoft team uses the German Flecktarn Camouflage pattern as our standard camo, so your video on German Flecktarn Camo effectiveness is a great way to show the recruits why we've chosen this camo! I wish your channel the most success in the world! Samuel Twigg

[@Brent0331]

Samuel Twigg Thanks man.

[@aaronpeet9613]

Man using ur method mine turned out pretty bad ass. Thanks for the vid.

[@Brent0331]

Aaron Peet No problem man, glad I could help.

[@richstone2627]

That shorty rocks

[@Brent0331]

+Michael Stone Thanks brother.

[@DASAGROUPAUS]

Great demo, thanks' for the simple and easy to understand video.

[@Brent0331]

+Nitrum T Thanks, glad it helped.

[@Goldeneye-mo9vg]

I used your method and it turned out well! thanks for the vid.

[@Brent0331]

Outstanding, I'm glad it worked out well for you.

[@firemarshal3738]

Your paint job on your rifle is AWESOME!! If you ever come to MT i would pay you to paint mine.. thumbs up bro!!

[@Brent0331]

Thanks man, no need to pay me. DIY that's what I made the video for.

[@thustra07]

Answered all my questions about upper painting, i.e. where to mask off. Thanks.

[@Brent0331]

Glad I could help.

[@obenite1899]

Awesome video my friend cheap and simple my favorite!!!!

[@Brent0331]

Thanks

[@NGreen001]

Best painting video I've seen yet. Liked and subscribed.

[@Brent0331]

+Made At 5.56 Thanks brother, welcome aboard.

[@ericocampo2283]

Excellent job..your tracking correctly and on target...

[@johnwayne6501]

very nice job...thanks for sharing.

[@Brent0331]

+john wayne Thanks for watching.

[@jayg4mrusmc]

Dude!! Love the video!! I like your approach to this camo job. You have given me some ideas. I like the sniper vail idea! Very cool!!

[@Brent0331]

Thanks brother.

[@realtissaye]

Nice skin! How many cases did you unbox to get it?

[@ForHisGlory-di3br]

every other vid i saw used a laundry bag for the grid... he uses a sniper vale.... True Marine

[@angel00demon]

Very nice pattern, and it's also very nicely done !

[@Brent0331]

Appreciate it.

[@wildrootsfarm1975]

Awesome how-to! Especially painting of the gear

[@rafaelalodio5116]

And the nice part is that you can use the same principle to camouflage whatever you want.

[@Brent0331]

Thanks brother.

[@Brent0331]

Yup.

[@justsomeguy3931]

If you haven't already, you should do a video about room clearing, slicing the pie, etc. It's cool watching you guys dissect that kill house, it'd be sweet if you explained how you do it.

[@TheFrog767]

And warm the paint can up in hot water for a few minutes the paint will flow better and you will get every bit out .

[@just82much72]

Very cool. Thanks for sharing brother!

[@thomasgriffin31oof57]

your awesome thanks for all the videos you do

[@Brent0331]

Thanks bud.

[@SmellNRoses]

Thanks for the taking the time to share this info and video...great job!

[@Brent0331]

Smell N Roses Thanks, glad you liked it.

[@tysonpalmour2466]

Wow outstanding job.

[@Brent0331]

Tyson Palmour Thanks

[@krishm16]

Crazy request, but I would love to see a video on how to paint a motorcycle helmet using the same patterns

[@rafaelalodio5116]

It looks cool, nice painting.

[@Brent0331]

Thanks

[@user-id5il7kc1r]

Beautiful 💓💓💓

[@treerat7631]

Looks good going too paint my paintball gun it is tan now and sticks out .

[@JuanRodriguez556beats911]

Awesome job!

[@Brent0331]

Juan Rodriguez Thanks

[@KurtOnoIR]

Looks good, I used wire mesh with diamond grid pattern one time. It came out pretty decent I think.

[@BobbyBowker]

Looks great sir, love your videos.

[@Redhawk03a]

Looks awesome dude. Will have to try this.

[@frankpuncekar5051]

Great info stay safe Rock On!🙏🇺🇸🤘🤘🤘

[@gettingpast4391]

i painted mine pink with an orange tip. I can open carry in toys-r-us. ok for real just OD green, and a rub down to wear some of it off. thats it. the more it wears the better it looks but Im not a professional like Brent just an American citizen.

[@project.redacted]

turned out awesome

[@Brent0331]

Thanks

[@anthonyreddy2834]

instead of sniper veil, I got a small laundry bag from dollar store (netted) same effect just easier, need to clean or degrease before painting, other tan that good video

[@Brent0331]

+Anthony Reddy Thanks.

[@ghostmost2614]

Great video Devil Dog! I just shared it on "Like Minded People". Semper Fi

[@Brent0331]

Thanks brother, S/F!

[@waterboy239]

Practicing on my kids bb guns almost ready for the real paint job