Paint your AR-15 Military BDU M81 Camo with HIGH QUALITY KBS Paint and Freedom Stencils

[@1116700]

The absolute best gun painting video on the tube. Looks saweeeeeeet.

[@righteousriverfishinginoregon7]

@@1116700 woweeeeeee!!!!! Thanks dude. I'm making a video of the entire build soon. Sub and stay tuned. Thank you!

[@1116700]

@@righteousriverfishinginoregon7 I just subscribed to your channel. This is the first vid. I've watched of yours, both my son and I appreciate your honesty and excitement for what you were doing. Too much fake in the world today........good job man

[@righteousriverfishinginoregon7]

@@1116700 Thank you so much for the encouraging words. I really just do what I do and don't care one bit what others think. Just having fun fishing and enjoying God's creation! Thank you again. Fish on!

[@1116700]

@@righteousriverfishinginoregon7 Don't mean to bother you with questions. Hope this doesn't sound stupid, but are you a born again believer?

[@righteousriverfishinginoregon7]

@@1116700 Your not bothering me at all. I am sir, a born again believer. I repented, confessed, and was baptized in basic military training in 2000. I am currently writing a fish devotional called "A Fish Devotional for Simple Fishermen" :)

[@lelwil2]

Looks good and thanks for taking to the time to record your process.

[@righteousriverfishinginoregon7]

Absolutely! Thanks for watching.

[@chchchscott1]

I was in till 1997. When I hear they used to use this pattern, makes me feel old!

[@righteousriverfishinginoregon7]

LOL Hey that happens in time. Don't feel bad, you did your part and helped to advance things for the young bucks!

[@SHOGUNTHEIMPERIAL]

Came out awesome & you learned the same lesson I did. Gloves from start to finish. Prep work & keeping the piece clean is paramount to a great finish every time.

[@righteousriverfishinginoregon7]

Thank you. That's all very true. I do like it.

[@bobbymorehead5069]

Wish I had your patience buddy. Turned out badass

[@righteousriverfishinginoregon7]

Ha! Thanks! I actually wanted to pay someone, but I couldn't find the right person so I did what I normally do.... research, buy products, and then do it myself. It wasn't that bad but it does take an entire day. Thanks for the comment. I'm breaking it in now and i love it.

[@Thundercaat2]

Thanks for the wholesome video. I was able to watch it with my son! Great job on the paint!

[@righteousriverfishinginoregon7]

Wow, outstanding. I completed a build with my son too and it was great for us both. Thank you for your support and encouragement!

[@makevelicustoms]

Wow it came out amazing, good job I will be doing a few lowers in the future thanks for the vid.

[@righteousriverfishinginoregon7]

Thanks for letting me know! I'm very happy with it and to me it compares with a professional paint job. Fun project and very rewarding.

[@righteousriverfishinginoregon7]

If you're not subscribed, please subscribe. Im about to publish a 223 Wylde headspace video that is really helpful and I'll have a few of my builds displayed soon, as well as this M81 camo build.

[@jwbennett4009]

I luv aero receivers also, paint job looks great

[@righteousriverfishinginoregon7]

Yeah, they are dope. Thank you!

[@BeardOperator]

Great looking, one of the best ive seen on youtube

[@righteousriverfishinginoregon7]

Wow! Sweet! I'm happy with the results and love the M81 pattern.

[@mattrogers2701]

Great video, man. I really like how the project turned out!

[@righteousriverfishinginoregon7]

Thanks! Me too! it is hard to find this color of green. I was surprised that the kit had the perfect colors. Thanks for commenting.

[@mattrogers2701]

@righteousriverfishinginoregon7 Yeah, the colors look great! Keep up the great videos. Maybe an update video when you finish the rifle out? I'd like to see how the build turns out.

[@righteousriverfishinginoregon7]

@@mattrogers2701 I will. The build is sick. I think you'll be surprised at what I've put together. Very few brands, and include Aero Precision, Strike Industries, and a few Magpul pieces. Stay tuned.

[@A.J.1656]

Silence is better than chipmunk music. Cool looking gun.

[@righteousriverfishinginoregon7]

@@A.J.1656 everyone has their own opinion. For my videos, only mine is important 🫡 thanks for the comment bruh!!!!!

[@A.J.1656]

@@righteousriverfishinginoregon7 🐿 You're welcome brugh.

[@Michael_Douglas007]

Looks so sick man good work

[@righteousriverfishinginoregon7]

Thanks! I really appreciate it and am happy with how it turned out.

[@kamikazelyricist1563]

Looks great man! Good job!

[@righteousriverfishinginoregon7]

Awesome! Thanks!

[@Youtube_art_class]

You took your time to clean it, properly tape up/cover the important parts, used good paint, painted it amazingly, good job bud! Turned out great, although I would’ve used a more Matte paint because this one looks kind of glossy, but man that looks good, keep it up!

[@righteousriverfishinginoregon7]

@@KZbin_art_class wowThat's really good feedback.I greatly appreciate it. I know it's not perfect and it did come out a little bit shiny. I'm still very happy with the results, and it reminds me of my military uniform.

[@maxcopple8187]

I've been working up the courage to paint a stock for months. Thanks for uploading this. A few more of these and I'll finely do it!

[@righteousriverfishinginoregon7]

@@maxcopple8187 just do it! You got it. Make sure to give yourself plenty of time for the project.

[@maxcopple8187]

@@righteousriverfishinginoregon7 thanks. Looks great btw.

[@K.Miller5150]

@maxcopple8187 i use to be the same way, now i am very good at it, just do it,

[@righteousriverfishinginoregon7]

@K.Miller5150 nice.

[@gibby3820]

I'm pretty new to the world of rifle building but not whatsoever to painting. I've gone through the ringer on at home paint jobs. I really appreciate your attention to detail. Every other rifle painting video I watch they don't even degrease etc. Mind boggling to anyone outside of "gun painting" world. Came out great!

[@righteousriverfishinginoregon7]

Wow thanks for the positive comment! I am not an expert at all but the military did teach me "attention to detail" and I am very happy with how it turned out.

[@gibby3820]

@@righteousriverfishinginoregon7 Fair play!

[@righteousriverfishinginoregon7]

@@gibby3820 yup

[@josephmarino3951]

Great job that looks almost professionally done thanks for the info may give it a shot

[@righteousriverfishinginoregon7]

@@josephmarino3951 thanks! It was a fun project and came out better than I expected. I appreciate the comment!

[@Lukas.Pannier]

Sweet build🔥

[@righteousriverfishinginoregon7]

Thank you! It came out better than I thought it would.

[@khester7397]

Excellent results! Your attention to detail and care in the process really paid off. Cool AF. Also, subscribed and am looking forward the the 223 wilde headspacing video.

[@righteousriverfishinginoregon7]

Great thanks!! I'm super happy with the paint, and the build results which I just finished. The headspace video is important, I believe, because it shows what you need to buy and don't need to buy to check headspace on 223 Wylde. Thanks for watching and commenting.

[@adrianocastro2375]

Great vid man, congrats. You've made a lot of people lose the the fear of doing this.

[@righteousriverfishinginoregon7]

I appreciate that! It came out better than I expected.

[@dboy_]

Wow, I'm impressed. I rattlecan all my guns and I get some good results, but nothing like how yours came out! Might have to start adding some clear coat and multi-tone/layer stencils into my mix. Great video, now paint the furniture and your optic ;)

[@righteousriverfishinginoregon7]

@@dboy_ thanks for the feedback. I like keeping the other components black. It makes the build exactly the way I like it. Give it a try sometime just make sure you have all day for the project.

[@adamrodgers2377]

Very nice 👍🏻 I am gonna try that Paint Kit for my next AR. I just finished my MK12 Mod 1 and painted it last week so im going to have to wait till I put together a MK18 style AR to try this Paint. Thanks for sharing this with us. 🤘🏻

[@righteousriverfishinginoregon7]

Nice. It's a fun project, but seems higher quality that most other products. Freedomstencils also has different patterns to choose from. Gave fun with that project and give yourself the entire day to work on it so you can let it dry properly between layers. Also, the clear coat really helped the build so order good clear coat in the beginning of the project. Take care.

[@victorrangel3874]

That came out badass. Waiting for mine to arrive. Practicing on the Maverick 88 followed by the AR

[@righteousriverfishinginoregon7]

Sweet! The paint kit has plenty of paint for several projects. Have fun with it and make sure you have ALL DAY reserved for this project so you can time the drying periods perfectly. Good luck!

[@Mr.Towboater87]

Thats beautiful great job man!

[@righteousriverfishinginoregon7]

Hey thank you! I love the look. I'm glad other people also like it.

[@Paulie771]

Good video. Didn't know either of these vendors or their products existed. I've been looking for a way to do an M81 pattern on my PSA Sabre ever since Duramag put out their M81 anodized mags. Will definitely be following your process! Thanks for putting this video together!

[@righteousriverfishinginoregon7]

Yeah, I love the M81 pattern and wore that uniform, so I thought it would be cool to paint that pattern. It took me a long time to find these products, but they are really awesome. But, if you use it then use clear coat. It really helps cover blemishes. Good luck!

[@Paulie771]

@@righteousriverfishinginoregon7 I wore it too (joined up early 2002) and it remains one of my favorites. Works well in my area (Middle TN) but Flecktarn probably works a touch better. Thanks again!

[@righteousriverfishinginoregon7]

@@Paulie771 www.freedomstencils.com/products/flecktarn-camouflage-stencil-kit?psafe_param=1&gad_source=1&gclid=CjwKCAiAzJOtBhALEiwAtwj8tu7uZ7VayzDFo53wRKwmXS5P0A5W4DibLJMrRQfPDqcO4bLi-to5QRoCXNcQAvD_BwE

[@Paulie771]

@@righteousriverfishinginoregon7 Now we're talking! That might just end up going on my 20" CHF A4 build.

[@righteousriverfishinginoregon7]

Awesome! I would love to see the results. Have fun with that project and make sure you have the entire day for the project. The drying and timing are critical and you need time. @@Paulie771

[@thzntz]

That looks awesome.

[@righteousriverfishinginoregon7]

Thanks a lot! I really like how it turned out.

[@briankeeton8712]

Badass. I’m tempted to try this.

[@righteousriverfishinginoregon7]

If you love the pattern then you should try it!

[@2ANinja]

Looks really good. I plan on doing something similar to my one of my ARs

[@righteousriverfishinginoregon7]

@@2ANinja it's a fun project. Go for it!

[@terryderush2657]

Now that looks super cool 😎 👍. Very nice 👍

[@righteousriverfishinginoregon7]

Thanks!

[@gdlr9488]

awesome job dude!!

[@righteousriverfishinginoregon7]

Thank you! Cheers!

[@RV-ds5uf]

Turned out very nice sir!!👍👍

[@righteousriverfishinginoregon7]

Hey thanks! I really like it too.

[@K.Miller5150]

Nice, gonna order this paint set and ise my own stencils

[@righteousriverfishinginoregon7]

@@K.Miller5150 go for it!

[@x.mike.]

Great job! Looks amazing!

[@righteousriverfishinginoregon7]

Thanks a lot. I love it. Just like my Air Force fatigues.

[@xCaPz]

That came out insanely good. Did you ever do a video showing how this looks after the rest of the rifle was built? Would love to see it

[@righteousriverfishinginoregon7]

Thanks for the positive comment! I actually need to show the entire build because it came out nice and the exact way I wanted it to. I guess I owe you all a video of that, so I better gitRdun. I think I do show it here: kzbin.info1vBFMeKB2OY?si=TsoK14onR3pGZ4pv

[@BroncoBob3113]

Dude that came out good

[@righteousriverfishinginoregon7]

Thanks! Yeah I love it!

[@jimgenksxxl]

Great job! 👍🏾

[@righteousriverfishinginoregon7]

Thank you! Cheers!

[@imdo301]

Excellent job!

[@righteousriverfishinginoregon7]

Thanks! I really like how it turned out.

[@imdo301]

@@righteousriverfishinginoregon7 so do i

[@isaiahrankin5063]

Looks pretty cool

[@righteousriverfishinginoregon7]

Thanks Isaiah! That's my brother's name. Solid name.

[@joschmo6020]

Not bad bud! It’s a rattle can job after all. Excellent from that gauge. Thanks for the tips.

[@righteousriverfishinginoregon7]

I appreciate the positive comment! Take good care and happy new year!

[@GamePumaAll]

Looks so good

[@righteousriverfishinginoregon7]

Dang, thanks man!

[@nadineherrell5426]

Well done!!! Michael Herrell

[@righteousriverfishinginoregon7]

@@nadineherrell5426 thank you Michael Herrell!

[@darrellunderwood1021]

Nice job, my man !!!!

[@righteousriverfishinginoregon7]

Thanks! I appreciate it. I love it.

[@jessjoshwyatt3571]

Can't see the A that you wanted to pop but hell yes brotha! Good job 👍

[@righteousriverfishinginoregon7]

@@jessjoshwyatt3571 the "A" is on the receiver and represents Aero Precision. I taped it off so that it didn't get painted at all so when competed, the project has a bare metal black "A". Thanks again!

[@JAFO44]

Dont give up..your DAY JOB!

[@righteousriverfishinginoregon7]

@@JAFO44 oh I won't. How else could I afford dope sick sweet tubular paint jobs like this.

[@stacyparker1299]

Looks good man

[@righteousriverfishinginoregon7]

Thanks! I love it.

[@vegasdavis5404]

So when it comes to combat situation I don't think gloss would be a good idea but I mean the chances of using it in that situation would also be very rare unless your a soldier of course. But as far as everyday let's go shooting gun or self defense gun I absolutely love the how that clear coat made it pop & I would do the same thing with mine. Looks amazing brother. I would recommend folks using a respirator though.

[@righteousriverfishinginoregon7]

@@vegasdavis5404 thanks! That's exactly the case. I have other tools for any sticky situations. This is just for fun! Thanks for the feedback!

[@bwerd6572]

I wonder why more people aren’t adding a clear coat? It makes it look so much better

[@righteousriverfishinginoregon7]

Good point. It did make it look way better. For the average guy with 1 AR I don't blame him if he wants it combat ready, dull, and not shiny. But, for the guy who just wants a cool gun, I think the clear coat is fire!!

[@TemptingFate-em5ho]

What's the reflection off that last coat? No one wants shiny camouflage.

[@righteousriverfishinginoregon7]

@@TemptingFate-em5ho I have no idea what the reflection is. It's likely light reflecting. As many others have pointed out, reflective camo is not preferred in a combat situation. And as I will state again, I don't care. This is a fun build and I'm not worried about it. Thanks for watching and commenting.

[@joeblow5958]

We didn’t use woodland camo much in the 90’s. Realtree and Mossy Oak camouflage was developed in the late 80’s.

[@righteousriverfishinginoregon7]

This is the camo I wore myself in the early 2000s

[@JohnDoeEagle1]

@@righteousriverfishinginoregon7 1981 - 2006 as standard and Special Ops still wear it onward. Guy doesn't know what he is talking about. No U.S. Military ever wore "hunter camo" ever.......

[@righteousriverfishinginoregon7]

@@JohnDoeEagle1 I don't worry about it too much, but I do love this camo pattern. I saved several of my uniforms to give to my kids. I'll probably give them this build too!

[@albertlopez2088]

Good shit bro 💪 👏 💯

[@righteousriverfishinginoregon7]

@@albertlopez2088 thanks!

[@omarbarron1822]

Looks good! I’ve been getting into painting lately specifically spraying… trying to master the craft… was looking into a cerakote class through cerakote official but then found out their 2 day course is overpriced 2k !!! Think I’ll just keep practicing…

[@righteousriverfishinginoregon7]

Yep,I also wanted cerakote but found this project and paint to be much more affordable.

[@PatrickDawson-j1z]

Is there any updates on the finished rifle ? I would love to see it !

[@Ironsight_Army]

Good stuff!! Can we get an update of the finished build?

[@righteousriverfishinginoregon7]

Thanks for the reminder. The build is complete and I'm breaking it in Friday so I'll make some footage.

[@Ironsight_Army]

@righteousriverfishinginoregon7 Awesome! I live in Salem & I have a membership at a private outdoor/indoor range if your ever in the area. I am always up for linking up with like-minded people.

[@righteousriverfishinginoregon7]

@@Ironsight_Army oh sweet. Thanks for the offer.

[@hawkman302]

One mistake though. Should have put the dust cover on so it would match the camo when closed.

[@righteousriverfishinginoregon7]

Not really because I already had plans to use a new black strike industries dust cover and i needed to paint the lip under the cover. Good observation though.

[@pointblank3736]

Good job looks great me personally would of used all flat colors.

[@righteousriverfishinginoregon7]

@@pointblank3736 thank you. This was a fun build and paint job, so I didn't mind using the clear to make it stand out. It's not my primary tool, if you know what I mean. I genuinely appreciate the comment.

[@JeanilynJuatas]

Beautiful.................

[@righteousriverfishinginoregon7]

Thanks!!!!

[@randalbloomquist7812]

Warm up your oven to about 120°F. Then bake for a couple hours to speed up the cure time of the paint.

[@righteousriverfishinginoregon7]

@@randalbloomquist7812 smart

[@Nocte_Stalker]

Matte paint still has shine/glossy look. I prefer flat paint.

[@righteousriverfishinginoregon7]

@@Nocte_Stalker true story. I prefer it exactly like it is. ❣️

[@Nocte_Stalker]

@@righteousriverfishinginoregon7 it came out looking really good. Any plans on doing the rail for it?

[@righteousriverfishinginoregon7]

@@Nocte_Stalker thank you. No because I used an old school polymar m4 rail that didn't need to be painted. However, this would look cool on a nice handguard!

[@heavycoughin6665]

They gonna drag you for taping off the logo lol. The rustolium flat camo paint is great, wouldn't clear coat it though. Looks nice.

[@righteousriverfishinginoregon7]

Maybe but I love it. Thanks!

[@xxx-ln9gv]

Nice.

[@righteousriverfishinginoregon7]

@@xxx-ln9gv thanks!

[@jacobthibodeau6685]

it would be a lot easier to just assemble the gun first and then paint all of it at once... it takes far less taping and you get a much better looking pattern all along your rifle and can even spray over any of your attachments if you plan on keeping them on that rifle. Its also much better to start with your lighter colors first and work your way to darker through the pattern because its always easier to darken something up then make it lighter. If youre using rattle cans then also dont worry about the paint rubbing off in some places, its going to happen and its part of the process and adds to the camouflaging, its not meant to be some beautiful piece of art, your firearm is a tool to save your life at the end of the day. The only real reason to pain a gun is to match it to the environment its going to be used in for lower visibility.

[@righteousriverfishinginoregon7]

@@jacobthibodeau6685 1. I didn't paint the rest of the build on purpose. If I wanted to paint the whole firearm I would have had it assembled. 2. I followed the painting directions and wanted the colors in that order for a reason. 3. I understand the purpose of this tool. I have plenty designed to be my work horses. This build was for fun. Bonus Fact - this is my project and I loved it and it came out perfect for me. You do you and I'll keep doing me. Thanks for being a great supporter of my channel!

[@ThePatriotParadox]

Turned out nice, how did it hold up?

[@righteousriverfishinginoregon7]

I don't know because I just finished it but I'm confident that with the 3 coats of matte clear coat it will hold up well.

[@zakiramjan9822]

The clear coats where the sauce is. You can use cheap paint with good clear and get great results. ​@@righteousriverfishinginoregon7

[@herbertmartin4320]

@@righteousriverfishinginoregon7did the parts go back in without a problem as far as fitment due to the spray paint?

[@righteousriverfishinginoregon7]

Great question. Because all the internal parts were not painted I had little to no problems assembling the lower. The takedown pins are the only pins that go in tough at first, but they are very easy to work and get moving properly. On this build, surprisingly the mags were a little tough at first, but after a few push pulls they work fine now. @@herbertmartin4320

[@herbertmartin4320]

@@righteousriverfishinginoregon7 sweet I’m going to try it on a Anderson upper and lower see how it comes out

[@5jjt]

If you shake a can more than 6 times per year, one of those paint can holding devices that insert into a Sawzall to shake it up are worth the cost.

[@righteousriverfishinginoregon7]

Okay thanks.

[@msgtvarela]

Nice job dude! How long did you wait in between adding the layers?

[@righteousriverfishinginoregon7]

Thanks. I can't remember perfectly, but I know it was more than 1 hour because the project took me all day. I may have waited a few hours between coats. I think I just checked them and if they looked dry enough, I continued.

[@Theman-xi3oc]

How has that paint held up so far? Just curious because I’ve heard spray paint doesn’t last long

[@righteousriverfishinginoregon7]

@@Theman-xi3oc I've only used it twice so it's holding up great!!!! 😄😄😄

[@ccisdaman3]

How much paint from each can did you use for this one paint job? Wondering how many rifles I can paint with one set of spray cans

[@righteousriverfishinginoregon7]

@@ccisdaman3 hardy any! I'm thinking 4 builds or less depending on whether or not you paint the rails.

[@ccisdaman3]

@ I plan to do hand guards and probably stocks too so I’ll estimate 2-3

[@mauricecanney7472]

Well that will make it shoot better and make me a bad ass.

[@righteousriverfishinginoregon7]

You're right. It does both those things. Spot on!

[@rigger4695]

Rule number one when painting anything. you always start with the lightest color then work your way to darker colors.

[@righteousriverfishinginoregon7]

Interesting rule. What rulebook are you referring to? Interesting perspective. Thanks for watching.

[@dannydodd2075]

Looks good should have kept the black away from the A but looks sweet

[@righteousriverfishinginoregon7]

Thank you but I did that on purpose and love it! Aero Precision is the best manufacturer there us and I wanted to rep.

[@FDS-p2m]

This project didn’t require any scuffing or sanding?

[@righteousriverfishinginoregon7]

Required is subjective. I didn't, but the paint I used had primer in it. Only time will tell. Thanks for watching.

[@TransTurbine]

Since you painted the upper and lower together as well as cleared together, how did they fair when separating? Did the paint/clear want to crack or did they part with a nice crisp transition?

[@righteousriverfishinginoregon7]

@@TransTurbine no issues at all. Smooth, and didn't even stick at all. Perfect!

[@TransTurbine]

@@righteousriverfishinginoregon7 Thank you for the quick reply and update. You did a very nice job. I have been contemplating doing something similar yet have been hesitant on spray paint and its durability.

[@5jjt]

If you get paint inside of the trigger's pin holes, are the pins harder to install?

[@righteousriverfishinginoregon7]

You would think so but I didn't have a problem with them. The mad well did make the mags fit in tight for a while, even though the well is flared, but I just worked it until everything functioned well.

[@bowermate007]

Hey Elijah, what handguard did you use in the video detailing headspace in the Wylde chamber? Thanks.

[@righteousriverfishinginoregon7]

Hey sorry about comments being turned off. KZbin did that when I wasn't looking. On the headspace video the handguard was the ZRODELTA Range Ready LVOA Rail. I bought it on a complete build but they also sell it for $150 or so. I believe they give a military discount. Thanks for the comment.

[@bowermate007]

@@righteousriverfishinginoregon7 Thanks! Love your channel. Proclaim the gospel with boldness.

[@righteousriverfishinginoregon7]

@@bowermate007 amen! Thanks for the encouragement! Fish on!

[@northwestfpwl3454]

did you assemble the platform in a week?

[@righteousriverfishinginoregon7]

Yes, I waited a week or until all the parts were available and then put it together. It looks SWEET!

[@jordanh7676]

man i raw dog my spray jobs and they came out great,but this look amazing. But a fingerprint or some chipping gives it character. Use the tool

[@righteousriverfishinginoregon7]

@@jordanh7676 what tool?

[@sagmatthews4199]

I know this is an older vid so you might not see this, but did you end up doing the handguard or stock/brace also?

[@righteousriverfishinginoregon7]

@@sagmatthews4199 it's not that old. No, I didn't paint the other parts because it was not part of my build plan.

[@sagmatthews4199]

@righteousriverfishinginoregon7 gotcha. Just curios.

[@righteousriverfishinginoregon7]

@@sagmatthews4199 I have serious plans to film a full build video for this pinger and am just trying to carve out the time. I fish too much and don't spend enough time with these tools.

[@Bill-n5k]

Great paint job. Just don't use glossy paint. Flat paint only. That's the first thing I saw. The shine defeats the purpose

[@righteousriverfishinginoregon7]

@@Bill-n5k thanks. That's good for you but I like this build a bit shiny. I used flat clear coat and I like it. I have enough subdued tools in my toolbox. This one is just a spare.

[@K.Miller5150]

Not really, doubt the man is in combat, and if he was in the woods with this rifle another man wouldn't miss the gloss on his rifle by the outcome of a 6ft man holding the rifle, one of the better rattle can jobs ive saw

[@righteousriverfishinginoregon7]

@@K.Miller5150 Good observation. I'm def not taking this rifle into combat, I got out of the military almost 20 years ago lol

[@ajfoyt1163]

Soooo, you spent days camouflaging your AR with paint...all so you could apply a glossier clearcoat to make it "pop?" 🤔

[@righteousriverfishinginoregon7]

@@ajfoyt1163 I spent 1 full day, and yes, that's exactly what I did and I love it! Thanks for watching.

[@ajfoyt1163]

@@righteousriverfishinginoregon7 fair enough bro 😁🤙🏻 it's all about enjoying the journey

[@righteousriverfishinginoregon7]

@@ajfoyt1163 Yes it is! I am always prepared for combat, but also enjoy creativity. I appreciate your perspective and chill attitude

[@ajfoyt1163]

@@righteousriverfishinginoregon7 likewise, my dude 😎 and that's good to hear, because it's starting to look like we may need every swingin' dick on deck before too long 😂❤️🇺🇲

[@andrewkaplan4521]

Did you finish your build?

[@righteousriverfishinginoregon7]

Yes of course, and after a long wait I finally have plans to have a video sharing the build sheet. Coming soon!

[@Youdoneedmyname]

It had fingerprints because you were impatient letting it dry.

[@righteousriverfishinginoregon7]

@@Youdoneedmyname thank you doctor paint. I don't really care because it came out exactly like I wanted it to.

[@dw7094]

I have asked quite a few folks why they painted their rifle. I got a lot of I don't knows and a few 'cause it looks cool. No real reasons.

[@righteousriverfishinginoregon7]

@@dw7094 well you didn't ask me, but I'll tell you anyway. Because it's fun and cool. 😎

[@JohnDoeEagle1]

Could have done without the "twerking" music but otherwise a pretty decent video. We don't twerk, we don't rap, we don't cry in our beer with suburban soccer Mom sensitive country. We ROCK N ROLL man!!!!

[@righteousriverfishinginoregon7]

🤣🤣🤣🤣 Nice feedback. Yeah, I just do my thing. Some people like the music, some hate it. At the end of the day, it's about the paint job lol. Thanks for the comment!!!

[@Texan_American]

Next time pop it in the oven after painting to harden the paint. Aluminum parts only obviously.

[@righteousriverfishinginoregon7]

@@Texan_American might not be a good idea with those plastic sticker stencils on there

[@haroldsmiley4194]

I know this is an older video... but I would HIGHLY discourage you from using simple green on your aluminum parts and pieces. Simple Green's chemical make up causes Hydrogen Embrittlement when applied to Aluminum... The US army even lost a CH-47 to the stuff back in the day

[@righteousriverfishinginoregon7]

@@haroldsmiley4194 interesting info. Thanks for sharing.

[@trexfighterpilot]

Took the time to degrease the surface, then immediately handled the receivers with your bare hands. Multiple times. That's my only critique.

[@righteousriverfishinginoregon7]

I'm not like many people and don't have french fry hands. My hands are clean, the product came out great, and handling the receiver did not affect the paint job in any way. Thanks for comment!

[@ShaneBraaten]

You Literally said that you touched it and left grease and streaks on it... Oh, AND that You Regretted it.... 😂​@@righteousriverfishinginoregon7

[@5jjt]

This comment made me wonder if the finger can be so clean that it won't leave a print.​@@righteousriverfishinginoregon7

[@NunyaByness]

Looks good AF. Captured the feel of brand new BDU’s. I had the sucky ACU’s. (Notice not many paint jobs copying THAT crap!) I did mine using Walmart camo cans. And the very same clear coat you did. I was inspired by Kryptek, but used a simple fishnet style laundry bag as a stencil. I just alternated light over dark. Once with just paint in a generic camo pattern with 5 colors. OD GREEN, dark olive green, foliage green, coyote brown, desert tan. Once the base is in take a pick of both sides, wrap the netting around the build very tightly. Thus distorting the fishnet geometry. Then paint light over dark, and dark over light using the pics as reference. Use a bit over overspray to spot and add texture during the netted stage. Then remove the net and enjoy the 3D look.

[@tylerparker3024]

You definitely should've wore gloves to touch it though even if it did turn out fine. Your skin produces natural oil that you don't feel and it absolutely can prevent long lasting results.

[@wildwoody20]

If you do this in a pistol you can't tell me you won't scratch and start peeling and putting it in a holster all the time

[@righteousriverfishinginoregon7]

You're probably right. It might not be the best solution for your EDC, but who needs to camouflage an EDC anyway. It's not for show and tell, it's to have the element of surprise. This method does have its place and purpose and it's really cool. Thanks for commenting.

[@dubstylee444]

Should have not painted black over the Aero logo

[@righteousriverfishinginoregon7]

I didn't. If you watched the video you would have noticed that I masked it off.

[@chchchscott1]

WARNING FYI ATF. Says paint in the serial Number is “destruction” of a serial number. Which could be a felony. So just be careful.

[@righteousriverfishinginoregon7]

@@chchchscott1 hey, good looking out!

[@blades2255]

Used flat paint to keep it camo. The used a glossy clear coat. Don't make no sence

[@righteousriverfishinginoregon7]

@@blades2255 it makes perfect sense because it's the exact way I wanted it.

[@torencalduris3114]

BDU isn't a camo pattern. Battle Dress Uniforms come in a variety of colors/patterns. I do appreciate the video, but I'm not a fan of the end result. But who cares as long as you like it.

[@righteousriverfishinginoregon7]

You are correct and pay great attention to details so I assume you must have been in the military like I was. I updated the video title to say BDU M81 Camo which I hope will make you a bit more accepting of my work. And yes, I do love it. It's bad ass. Take care my fellow comrad in arms. www.freedomstencils.com/products/bdu-camouflage-stencil-kit?variant=42089728330&currency=USD&gad_source=1&gclid=Cj0KCQiA2KitBhCIARIsAPPMEhJ5Ujz7oHs5jWs1VbX5IPSEwwZ9gcrJhnAAL3tnwcpUHtY6aIuRmwEaAqK-EALw_wcB

[@torencalduris3114]

@righteousriverfishinginoregon7 Not military, just a dirty civilian nerd lol. Thank you for your service!

[@seanhatch4425]

This is how you don't paint your recievers...

[@righteousriverfishinginoregon7]

I'm proud of you for such a witty comment. Thank you for supporting my channel!

[@bigdongled3077]

$75 bucks for 4 cans of spray paint is insane 😂😂 real ones use Rust-Oleum camo spray paint. Less than 30 bucks for the same number of cans.

[@righteousriverfishinginoregon7]

As I stated in the video, the quality of the paint I advertise is significantly higher that what you find at the store. Additionally, it is hard to find the exact colors needed to do this particular camo job, but this brand matches the colors perfectly. It is WELL worth the $75. And they give a military discount for those who served.

[@RyanTJohnson]

Great job just not a fan of the pattern/colors

[@righteousriverfishinginoregon7]

No problem. I love these colors because they were on the uniform I wore in the service. Thanks for watching and commenting!

[@RyanTJohnson]

@@righteousriverfishinginoregon7 fair enough!

[@Rebel_Spirit_Operations]

Honestly i think that paint is either hot garbage or perhaps wasnt applied properly. Not talking shit about u or anything but still oily means poor adhesive normally. Taking a rag and rubbing down your paint job will help with sticking. While i do think a songle thin layer of clear is ok it also does increase the shine which isnt ideal 3 coats and man the shine on that will stick out. Good job for the pattern though next time go with BCM upper 😂

[@righteousriverfishinginoregon7]

Good comment. I really don't know much about paint quality except for the price lol. I did not like how sticky it was after completing the layers, which is why I clear coated it. Maybe I just should have let it cure for several days to see if it firmed up....idk. I understand it shines, but I don't have a problem with that. I really don't climb around in the jungle much. And, I do love Aero Precision so I like to match the upper and lower with the same brand. I will need to check out BCM. Thanks for watching and commenting.

[@paultoth7853]

Instead of spending so much on the stencils, just go buy some jig saw puzzles. Of course it will not have the exact look of woodland camouflage, but if that is not important, use the puzzles.

[@righteousriverfishinginoregon7]

@@paultoth7853 it is obviously important for my build to look exactly like the camo pattern in this video. It is exactly the pattern I used to wear while active duty. I'm not complaining about the price. I'm content with this build and the paint job. Thanks for the recommendation.

[@Butt-Head9]

This isn't airsoft and I don't think he wants his rifle to look like a kid made it 😂

[@Butt-Head9]

I got lucky and served also with this wonderful camo pattern. Also DCU. Dodged the ACU pattern.

[@motodad1753]

You lost me when you tapped off the logo. Smh

[@righteousriverfishinginoregon7]

That's fine by me. I'm not hiding in a jungle these days and i love Aero Precision so that's what I wanted, and I love it.

[@agannon42]

No thanks...looks shitty

[@righteousriverfishinginoregon7]

Good thing I don't measure my success on the opinion of others. I love it. You take care and thanks for watching.

[@maclm826]

​@righteousriverfishinginoregon7 it looks good don't listen to the haters. They only hate when it's something they want to do but can't do it any better

[@righteousriverfishinginoregon7]

You're awesome man!@@maclm826

[@sethwheatley6481]

Bro it looks awesome obviously guy has some issues belittling others to boast his own ego. You do you and that's all that matters.

[@bearrage80]

Dude never clear coat……..never., Flat is your friend

[@righteousriverfishinginoregon7]

@@bearrage80 I did it on purpose and it's perfect! I have other more frequently used tools for all needed situations.

[@highonbusa6520]

Looks good but dude it’s a rifle!! It’s not to be looked at it’s to do it’s duty

[@righteousriverfishinginoregon7]

They can do both. I'm sure you wouldn't argue that's it's not a bad idea to have one more piece lying around your house. Thanks for watching.

[@highonbusa6520]

@@righteousriverfishinginoregon7 as ever house hold should have. You don’t train with your rifle do you? I don’t mean target practice

[@righteousriverfishinginoregon7]

@highonbusa6520 your crazy man. This is not the place to have this discussion. You take care of your safety and I'll take care of mine. Trust me, I'm good. Thanks for your concern.