An overview & Tutorial on controling your Quad DMX wash/par fixtures with the new RGBW4C. We learn how it works & also how to set up our fixtures to work with this way cool controller :) Enjoy!
Пікірлер: 94
@briansredd12 жыл бұрын
You are right, i'm not a fan of 512 DMX. However, a controler like this built for the specific lights i'm using, i really like! Things like this or the RGB 3C & Duo Station are made for people like me all day. A great simple easy compromise
@emmockladdie8 жыл бұрын
thank you dude ... lost my instruction leaflet and you saved the day!
@AaronMitchellAAM2 жыл бұрын
Very useful video! The only thing that I found kinda funny is how you said "cayenne" instead of "sigh-anne"
@briansredd12 жыл бұрын
Good question. When working with a regular 512 DMX Controler with "fixture" buttons, you'll often end up with 8 faders & 16 addresses per fixture. There's a button that lets you control 1-8 in one position & 9-16 in another. So, to make things easy with the fixture buttons, you allow 16 channels per fixture weather they occupy 16 channels or not. On programs like MyDMX, the profiles replace fixture buttons & only occupy the addresses used. On the RGBW4C, each fixture only uses 4 addresses
@Floobydust4111 жыл бұрын
Brian - I'd recommend the 4C controller even if you only have RGB lights because you can use the spare channels for those fixtures that only need a single DMX channel. They would be on the White channel.
@realSethMeyers11 жыл бұрын
Subscribed. You're beginner-friendly, down to earth, and you explain well.
@briansredd12 жыл бұрын
Comscans = no. They are scanners & this is built for RGBW, RGBA, or Quad LED wash/par fixtures Mega Bar 50 RC - Maybe, but thoes lights are RGB. I'd recomend the ADJ RGB 3C for RGB and/or TRI LED fixtures. That piece is built for RGB wash/par fixtures and does it very well :)
@ArrowhouseEvents12 жыл бұрын
Ok thanks for the quick reply, if another few uplights are purchased I think this or the ADJ RGB 3C will be necessary!
@briansredd12 жыл бұрын
Yes, ether the RGB 3C or the Duo Station is perfect for TRI LED or RGB wash/par fixtures :) Get the best lappy you can afford ALWAYS
@briansredd12 жыл бұрын
Well Static anyway. assign half your fixtures to fixture 1 and the other half to fixture 2. Turn on fixture 1 & do a manual RGBW color mix. Then, turn off fixture 1 & turn on fixture 2 and do the other color in manual RGBW mode & presto!
@jubihelfenstein2 жыл бұрын
Hi, good video, can I control 3 devices with 5, 5 and 7 channels each with this controller? Or what kind of controller would I need for that? Unfortunately I am very new to this topic. Kind Regards Joel
@Clifftheblackhatgringo12 жыл бұрын
Great vid. I'm a bit confused now on addressing...I've been keeping all lights 16 channels apart, like I was taught. However, recently I've been noticing folks doing it like you did in this vid. My lights don't have any "delay". Is there a difference between running them 16 channels apart vs running them the next channel up from the channels used on a particular light in the chain?
@briansredd12 жыл бұрын
It's only complicated if you want it to be. Otherwise, it's as easy as an RGB 3C. It's about options. Make it hard or make it easy. Up to you.
@freerikki9 ай бұрын
Hello Brian, I have four vpar pak but the chases and fade doesnt work with this controller.
@briansredd12 жыл бұрын
I'd recomend the RGB 3C which is perfect for RGB lights, but Chauvet dosen't give you the propper channel mode options
@Yeshuarise20232 жыл бұрын
Thank you so much for your video teach
@astonair12 жыл бұрын
Could you please tell me if a cable for the lights to the controller is included in any of the products or must i buy them seperately? I am looking forward to your relpy!
@johnmullens2857 Жыл бұрын
Weird. when I turn the unit on, fixtures 4/8 are on and I cant even turn them off. Blackout is off to begin with. Is that because of the lights? it also starts up with "manual rgbw" on instead of "chases". took out the cable and it starts up like in the vid EXCEPT fixture 4/8 is on at startup. I dont get it.
@PLUMEY1412 жыл бұрын
Brian, Will this controller do 2 different sets of lights for uplighting? Lets say 1 set of QA Par 38's you have behind the head table showing Amber. Then around the room you have more uplighting and they want it Blue. will this controller do 2 different pairings this way? Or do I have to by seperate controllers? Thanks
@DaveSHarris12 жыл бұрын
Hi Brian, can you go into some off the more advanced features. I'd like to use 8 rgb tri7s and to be able to create multi coloured chases, like a colour flow or multi colour chase. Does it do that? Cheers dave
@vernystinger12 жыл бұрын
Hey there . I have the RGB4C and I have 18 TRI PAR uplighters . Can the RGB4C control all 18 lights ? Thanks ..... Lee in the UK
@ZantoxHD12 жыл бұрын
What's the diffrence between ADJ RGB 3C and the ADJ's RGBW 4C? Thanks for the answer.
@SteveL8612 жыл бұрын
hi brian do they have a controller similar with the same features in the controller for example chase sound active, and strobe for led fixtures such as tri 7's mega tri par, and mega par pro (10mm led one) also i ahve a video request could you do a video of if you were going to get a new laptop for djing using v-dj. what processore would get ( i3,i5,i7) and how much ram (6g,8g,12g,18g)
@ThePaul9275 жыл бұрын
Hi, I have a Q’s about this controllers. So is adj rgbw4c led controllers can work with adj vpar pak led lights ?
@tyndenhollander10 жыл бұрын
Is it a plug and play controller? Or do you have to program the lights?
@briansredd12 жыл бұрын
MrCoolDude081 is correct. There are only 3 channels on the ColorBurst & the 3 DMX channels are not 1-red 2-green 3-blue.
@YoutubeNev11 жыл бұрын
I have ADJ Flat par tri7. Im thinking of buying this controller and In using the address function, would each light fixture take up 3 consecutive slots like A001 , A002 then A003 with the next light being set on A004? Because its a 3 channel light? Or would i assign it like how you have in this video?
@geekag17 жыл бұрын
Does the ADJ RGB W 4C have enough options to control the ADJ Mega Bar 50 RGB RC 22" RGB LED Bar?
@ralphcalkins74093 жыл бұрын
My fixture 1 displays d.001 is blinking fixture 2,3&4 all working good off the RGBW4C LED CONTROLLER fixture 1 nothing but display blinking. Please advise thank you.
@djmixnspin11 жыл бұрын
The 1st time I watched your video I was able to use my 6 up lights and rgbw4c controller. Ive used them for 3 months now and have never had a problem. Tonight I plugged them in and can't get A005 to work. All of the uprights are on channel 4, the 1st, 3rd & 5th are on A001 and work fine. Uplight 2, 4 & 6 are on A005 and won't work. How do I fix this?
@paulkclews8 жыл бұрын
Do you know if it's possible to use fixtures with dip switches with this controller?
@DJErrn12 жыл бұрын
I think you could upload 2 different static colours for example lets say I'm doing a wedding reception and the colour scheme is green and purple, I assume it would be possible to make either the 2 static colours or make a chase sound to light, is this possible?
@Ereungafa5 жыл бұрын
Thanks man. You saved my ass this morning.
@DjDiamondLee9 жыл бұрын
I am trying to get this to work with the Chauvet gig bar. Any suggestions?
@DjDiamondLee8 жыл бұрын
***** I did was well. THe remote works fine. I sold mine. I also bought a small remote for my uplights
@johnq61238 жыл бұрын
What do you favor, ADJ RGBW 4C or Obey 4, for a complete NOOB??? Just getting into lighting and mostly UV Bars and considering more; don't know what to mix with ADJ ECO DMX lights.. Thanx in advance... Happy holidays
@calebk.15638 жыл бұрын
+John Q Those are both great controllers for 4 channel LEDs. either do the same job but the RGBW4c has 3 preset color options which Chauvet's Obey series does not. I would personally run This Board. But later down the road when you start buying higher end lights, you will need another controller so maybe also consider a larger board or a software and converter system like I use
@DJGeorgeDXM Жыл бұрын
I should have seen this video before buying the ADJ controller I bought some Chinese par lights and they don't even have channel mode, the manual says it has 8 channels but I don't have the option on the screen. 😥😥
@DJGSoundsUK11 жыл бұрын
I'm guessing you can't use this with just RGB lights like the mega tri par?
@ericthompson99703 жыл бұрын
Brianredd, can I use the ADJ Stinger with this device?
@ericthompson99703 жыл бұрын
I have ADJ Stingers. Do I need 2 DMX Controller s to operate them separately? Please Respond.
@OliverHarrington7 жыл бұрын
Will this work with an RGB + UV light such as the mega tripar profile plus?
@TrashCanPoets8 жыл бұрын
Can this controller run two separate program, example CH1 VPAR PAK and doing a slow fade CH 2 is a GIG Bar and on sound mode is this is possible?
@DJGSoundsUK11 жыл бұрын
Say I want to have fixture 1 doing one thing but fixture 2 doing something else at the same time. Can that be done using this controller?
@DJakeRestless11 жыл бұрын
Could i use this controller with the Stormchasers by blizzard lighting? im struggling to find a good controller
@briansredd12 жыл бұрын
You'll want a full-on 512 DMX Controller for that. This is a more simple economical controller
@lightssoundactionentertainment10 жыл бұрын
Help ..all new to this and I am ready to throw these things off a cliff!!!! ..have the same setup..same lights...same controller ...the first of the two lights doesn't respond to the controller, but the second one in the daisy chain works fine...any idea of what I have done wrong. I believe that I have both of them set up identically (per your video )
@ArrowhouseEvents12 жыл бұрын
Would this controller work with ADJ Comscan's and ADJ Mega Bar 50 RC's? Thanks in advance
@MathewFawcettDrums12 жыл бұрын
Could i use this with the American DJ Color Burst 8 DMX?
@BGMIX200012 жыл бұрын
Would this work with some ADJ TriPar Profiles??? Please Reply Thanks
@nanjr11 жыл бұрын
PLEASE HELP! I'm NEW in this lighting stuff... I'm trying to buy a couple of these on ebay.... DJ 177 LED Light RGB PAR 64 DMX512 Stage Party Show VVME will I be able to use this mixer with these lights??? THANKS!!
@oscaraquino31502011 жыл бұрын
will it work with ADJ Mega par profile? because i need to do green and white on every other light ....
@BEMIXGERMANY10 жыл бұрын
Help me, please... I have the rbgw4c with 2 64led RBG lights. But i just can controll the lights With the First Button, Not with 1/5 and 2/6 Button. What i must so? I have the cable Out of the Controller in into the First light, and from there out in the Second light. Sorry for my Bad english.. Ben
@angel30677 жыл бұрын
Can you control a 1500w flash with this controller? Thank you
@ericgarcia156210 жыл бұрын
Hey buddy. .can this controller.manage 4 up lights and 2 adj inno pocket spot
@D4N131211 жыл бұрын
is this controller can be used with 3rd party LED Pars?
@DJmax246812 жыл бұрын
so this product will work with the adj micro wash and mega par profile
@LukasDegens12 жыл бұрын
Can I use this controller with the Eurolite LED PAR-56 RGB DMX?
@djcuz11112 жыл бұрын
can you use a mega par profile i know it docent have white but i can live with out white ???
@DJPhlirt11 жыл бұрын
I have 2 revo 4s and a tri led will this all work together?
@briansredd12 жыл бұрын
As long as it's capable of 4 channel mode, it should. your 4th channel "white" becomes a dimmer with RGB lights
@joelliljedal15807 ай бұрын
witch dmx adress do you use here 1:30?
@romeoredwood15073 жыл бұрын
Where can I get LED 3 pcs 8w v12-24VDC ceiling lights
@romeoredwood15073 жыл бұрын
You very knowledgeable when it comes to LED my email address romeoredwood144,@gmail.com
@DJmax246812 жыл бұрын
will this work with a 5 channel moving head please reply asap
@briansredd12 жыл бұрын
I don't recomend this for TRI LED. I had very limited succsess with it. I think RGB fixtures get confused on the 4th channel. I'd stick to Quad with this controller (unless i did something very wrong setting it up)
@jdelgado19076 жыл бұрын
Brian I have the ADJ pocket pro moving heads. What dmx controller can I use. I'm only using it for the moving heads and nothing else so I don't wanna spend a lot of money. Let me know. Thanks!
@TheCrazytommy12 жыл бұрын
great video Brian :)
@petershade35106 жыл бұрын
Just got the quad pack pro. I am a drummer and dimply want to have all lights change to the same color using sound active.
@jeremynolf35709 жыл бұрын
Will this controller work on the ADJ Mega flat plus lights, with the UV as the 4th channel?
@calebk.15638 жыл бұрын
+Jeremy Nolf It most likely will. It will just substitute the White for UV and the preset colors will probably be useless
@alei79tube7 жыл бұрын
I would say that preset colors normally involving white or amber will look different, not be "useless"... and several of the preset colors don't involve white or amber and won't look any different at all.
@thebirdman61211 жыл бұрын
How exactly can you connect multiple lights to this controller
@drumauditionchannel32556 жыл бұрын
What s annoying me the most is when I go to sound activation mode in the manual it says that it cycles through colors but it does not. It does not cycle through any type of green color. Frustrating.
@theofficialandylaytonjames Жыл бұрын
Thank You
@briansredd12 жыл бұрын
Yeah like I say above, this isn't a full-on 512 DMX Controller. What you want to do you can do with just about any 512 DMX controller with some programing knowledge and some time on your hands. This is just an easy affordable way to control Quad LED's
@DJmax246812 жыл бұрын
can you change the pre set colours
@santosjohn1912 жыл бұрын
yea it will i use it with those!!
@dillonr73728 жыл бұрын
what is the cheapest led light for the adj 4crgbw controller
@calebk.15638 жыл бұрын
+Dillon Ramnanan I am also wondering the same thing
@MunicipalAudio12 жыл бұрын
It sucks I bought some off brand par cans and they won't work with this but for Par 64 LEDs you can't beat $75 and I bought 8 of them 2 years ago.
@antonykahil12 жыл бұрын
Thanks brian
@Grizzlybeartheneverending11 жыл бұрын
how muxh does it cost?
@drumauditionchannel32556 жыл бұрын
Trying to understand this board better and it’s difficult.
@jonahmolinski12 жыл бұрын
I dont think soo. But the colorburst is 3 channel.
@tyndenhollander10 жыл бұрын
What lights?
@danventress47359 жыл бұрын
Do these work with rgb
@calebk.15638 жыл бұрын
+Dan Ventress for RGB, buy a Chauvet OBEY 3
@WeddingDJBusiness12 жыл бұрын
That was fairly complicated I think a simple dmx controller would be easier to understand and program and has the advantage of doing your own chases/light sequences.
@jonahmolinski12 жыл бұрын
Actually I think it would
@DaveSHarris12 жыл бұрын
thanks. i'll take a look. unforunately that controller is a lot more expensive ;-(
@o0DJJalapeno0o11 жыл бұрын
Do you know if you can use a 6-channel par with this controller?
@ericgarcia156210 жыл бұрын
Hey buddy. .can this controller.manage 4 up lights and 2 adj inno pocket spot
@AgentTadpole10 жыл бұрын
It'll be worse than useless for the inno pocket spots, since those have probably at least 12 channels. You'd only be able to set their colour, you wouldn't be able to control their gobo, pan/tilt, shutter etc. As for the uplights, it'd be fine for that.