Рет қаралды 31,802
Honda CB750 Side Cover Repair and painting! Pati takes a HUGE leap forward and now looks very complete as I work to repair and paint side covers to mount on the bike. This video is not intended to be a how to but rather just me thinking through the task at hand and coming up with solutions that best fit this project. There will of course be a lot of different ways to tackle this job so here is simply how I did it.
To repair the covers I first sanded them down and ended with a 120g finish near the repair area. I then cleaned everything before using tape to hold everything in the correct position. From there I used superglue to get the pieces set up. On the backside I used fiberglass that I already had to repair the cracks. I used at least 5 different small pieces for cover and feel it is a strong repair. Once set up I painted them with SEM primer, a custom mixed paint, and Spray max 2k clear before doing a polish for final finish.
With the covers repaired I finished the job with some early badges I also sourced used to fit the look I'm after. The early badges look better to me so it was a fun detail to go after. Once mounted the bike looks so much more complete than it did before and I am super happy with the results! Stay tuned for lots more CB750 content as I continually work to improve this bike.
If you found this video helpful or simply wish to support the channel further feel free to donate to the "Tip Jar" via the paypal link below! Anything is very much appreciated!
www.paypal.com...
Brick House Builds Amazon Storefront
www.amazon.com...
For updates on this project as well as others be sure to follow along on all the Brick House Builds social media platforms!
Instagram - / brickhousebuilds
Facebook - / brickhousebuilds
Website - www.brickhouse...
Tik Tok - / brickhousebuilds
#brickhousebuilds #cb750 #fiberglassrepair