Bridgeport Bushing Repair

This video walks you through how to replace the bushings in a Bridgeport Series I head. For questions please call 1-800-285-5271

[@davidsolomon9087]

I just wanted express a yuge amount of gratitude for this video and your company. my company's usual parts sources had no real idea of the different motor shaft diameters when we originally ordered parts. I knew the motor's vari-disk bushings weren't correct and my boss called and explained our problem. they were clueless. I watched this video multiple times to see what our issue was. knowledge gained and forwarded the video to my boss and we discussed it. I said he should call you and talk with a rep. your rep was friendly, understanding and worked with us to get us the right parts even tho a 2hp motor rotor isnt a standard sold part. our vari-disk shaft is still usable but took a beating from the broken key and shoe. i shaved a couple thou off a solid piece of keystock and drilled&tapped it to use in place of the 2piece, 2hp setup. this being my first Bridgeport rebuild with ZERO experience, overall, it came out well. our machine is up&running and running well. thank you to all of the H&W crew for passing on this knowledge.

[@HWMachRepair]

Thank you, it's always nice to know that our customers can get their machines up and running with our help. Let us know if you need anything in the future.

[@earleclemans4836]

This guy is the best and he answers the phone

[@jackwilson4197]

I rebuild them before but this man now his shit I say he's rebuild thousands off them

[@workwillfreeyou]

Great job with the Bridgeport rebuild series! Thanks, Jim.

[@seeigecannon]

Good video and great marketing for your company. I am going to be buying stuff from you later today. Something to consider: if you guys replace bushings often at your shop you should get a spiral reamer that is at the proper size. If you are just removing epoxy then it shouldn't take much torque and you might be able to do it with a hand drill. This should be faster than using the Dermal, but it will also be extremely repeatable and give you a good fit every time. Down side though is that you will need to rough up the surface before the epoxy.

[@k5at]

Nice work Barry!

[@janvanruth3485]

thanks a lot for this excellent video series

[@vernondau5686]

Your videos are just great and I really learn a lot! The drums are not so great.

[@dalepres1]

Love the videos. Please consider dropping the music.

[@darryldodge8383]

Definitely agree, the music adds nothing and is very annoying !

[@Y0Y0thrower]

Haha, the music is perfect though!

[@Max_Marz]

I used our sandblaster to clean the epoxy out of the bores, I shot only from the back side to avoid hitting the cone surface. It was exceptionally satisfying.

[@Laura-wc5xt]

very informative...thank you....

Sir! Can u tell me what kind of plastic used for the bushing and the key. I got an old BP 2j head 2hp and need to replace those bushing and key but i cant buy that kit here in my country. Thank you so much!

[@robertaguerriero6721]

Hey you guys make this look easy but I know it's not thanks for the info

[@ColKorn1965]

In the shop where I work we bored the pulley to accept Delrin bushings that we made for it.

[@DavidSmith-ib5jl]

I have to replace the bottom motor varidisc and already have the urethane glue and bushings and would like to know the outside diameter of the arbor you use for the motor shaft? Your videos on Bridgeports has been most helpful on getting mine working again.

[@HWMachRepair]

Hi David. We use a gage pin the same size as the motor shaft. You don't want to use your actual motor shaft in case it is worn. A 2 HP shaft is 1.179" and a 1.5 HP is .938", also in case someone else needs it, the spindle side would be 1.377".

[@Daniel-vq9zb]

Do you know where I can pick up a motor fan for a 2hp us motor brideport

[@alexextreme3026]

Qual é o diametro externo desta polia????

[@prboulay]

Thanks for the detailed how to. With this instruction and the book I have confidence I could pull off this particular repair. My question is how to know that it needs to be done? My BP has this variable speed arrangement and it works although it is probably noisier than I'd like but what of that? How noisy is too much? Maybe you could do a series of before / after videos.

[@HWMachRepair]

prboulay That's a great idea for a video or a video series! If you are concerned about the noise that is in your head now you can always give us a call and ask for Barry. He will be able to tell you if the noise is normal or something you need to fix. 1-800-285-5271

[@edenliam2578]

You all probably dont care but does someone know a way to log back into an Instagram account?? I somehow forgot the account password. I appreciate any tips you can give me.

[@edenliam2578]

@Samir Ford Thanks so much for your reply. I got to the site on google and I'm waiting for the hacking stuff now. Looks like it's gonna take a while so I will get back to you later when my account password hopefully is recovered.

[@edenliam2578]

@Samir Ford it worked and I actually got access to my account again. I'm so happy:D Thanks so much you really help me out !

[@samirford7596]

@Eden Liam You are welcome :D

[@AngeredKabar]

Completely rebuilding the heads on the half dozen bridgeports at my work sounds like a great project, but I know work isnt gonna buy me parts until they break :(

[@jeffchurch6068]

I know this is an old video and you may not be checking the comments but great job. Two questions what type of grease do you recomend and how much do you put in?

[@HWMachRepair]

Hi Jeff, are you talking about the grease where the bull gears are? We use Mobilux EP-1 and re recommend about 1-1/2 tubes for a variable speed and 1 tube for a step pulley . If you have any questions you can give us a call at 1-800-285-5271 and someone can help you with any other questions you have.

[@ducati543]

Not to be too critical but the volume when you talk is low but when you play that music the pounding shake's my house.

[@mathmetool]

What glue is it best to use for the bushes? I can’t buy the kit in the uk, can get the key and bushes but no glue.

[@HWMachRepair]

We just recommend any two part adhesive. Most hardware stores should carry something that will work.

[@PanamaSticks]

In your video, you show that the bearing housing on the spindle varidisc has already been removed. Can the bushing be replaced without removing the bearing housing? I'm sure we can pry the bearing housing off, but we do not have a press to put it back on.

[@HWMachRepair]

PanamaSticks Sorry for the late reply on this, Yes, you can replace the bushings and leave the bearing housing on. The only possible trouble spot you may run into is removing the old key and any glue residue from the hole.

[@PanamaSticks]

H&W Machine Repair and Rebuilding Thanks. I ordered a bushing kit. Now all I need is time to install it!

[@ottostasi8226]

Another great video Barry , why plastic bushings ? That must be how Bridgeport designed it but I wouldn't think they would use plastic ? Anyway thanks for sharing

[@HWMachRepair]

Bridgeport also used a Delrin material for some of their bushings, but the ease of install pushed the plastic bushings to be the main one that they used. The plastic isn't a cheap plastic, it's more of a hardened composite plastic. As long as you are using the machine in the way it was meant to be used and take care of any issues as they arise, the plastic bushings work well. Still better than the metal on metal machines that you get from many companies. -Barry

[@ottostasi8226]

@@HWMachRepair Thanks for the reply , I appreciate it .

[@NaksNamanVlog]

Already replaced all the parts that need to be replace as well as all the bearings. As of now, assembled today and try to test. One thing ive notice when i speed up vibration were noticeable. How to reduce it? Or is it possible that the Adjustable Drive A Varidisc is not balance when rotating fast?

[@HWMachRepair]

The drive discs are balanced at the factory so it wont be that. Since you tool it apart it may be an alignment issue. If you loosen the bolts and then turn on the machine, retighten them while the head is running to get it into proper alignment. If you have any questions you can give us a call and we can try to walk you though it: 1-800-285-5271

[@NaksNamanVlog]

@@HWMachRepair maybe which bolts to be tighten any specific location thnaks alot.

[@HWMachRepair]

@@NaksNamanVlog Apologies for the late reply on this one. There are 3 nuts that attached the quill to the bull gear housing, those are the ones that you want to loosen. If you want to give us a call, this is a procedure that is easier explained over the phone: [phone]

[@NaksNamanVlog]

@@HWMachRepair im from the Philippines. Maybe you can make another video i guess? Hoping for it..

[@NaksNamanVlog]

@@HWMachRepair or maybe is this the part number HQT1495 HQT1496 HQT1497.

[@PanamaSticks]

I just noticed something... At 16:11 into your video, you show a closeup of the key inserted into the motor varidisc. That is not how the old key came out of my machine. On my machine the plastic faced into the bore. Since the varidisc is supposed to slide up and down on the motor shaft, I think it makes sense, doesn't it? You don't want steel gliding against steel with no lubrication.

[@HWMachRepair]

PanamaSticks The way that we showed it is the correct way to install the key. Once everything is put together with the new bushings, that metal part will not actually be touching any other metal. The only part of the key that will be touching is the sides of the key which are plastic. The metal part is just holding that plastic part on. If you have any other questions feel free to call and Barry, our owner and main head rebuilder, would be more than happy to explain it better than I can through a KZbin comment.

[@HWMachRepair]

H&W Machine Repair and Rebuilding 1-800-285-5271 Sorry here is our number

[@PanamaSticks]

H&W Machine Repair and Rebuilding I mean no disrespect, but our machine was assembled the opposite way at the factory. This is the first time it has been taken apart since.. The way you install the key, it appears that metal will run on metal as the varidisk moves up and down the shaft.

[@PanamaSticks]

PanamaSticks I apologize. Here I am the student, and you are the teacher, and I just told you you are not doing something right. My bad. I will do it the way you suggest, even if it is not the way it was installed when it came out of the machine. It's your kit, and you must install a lot of these. So I will have to trust you.

[@HWMachRepair]

PanamaSticks No apologies necessary. Just to double check ourselves we called one of our contacts that worked at Bridgeport when they were still made in the USA and he said that when he was making them they installed them the way that we showed in the video. It's very possible that they are now installing them like that in the factory. We have really only had to rebuild a handful of newer HJ heads and haven't run into that yet.

[@javiercarranza7190]

I need part number plastic insert for 2 hp motor

[@HWMachRepair]

The PN for the 2HP motor bushing is #1114: machinerypartsdepot.com/product/1114/

[@tomclark6271]

FYI... WD-40 is not a lubricant, according to the WD-40 company.

[@ttocselbag5054]

Tom Clark -- Correct sir. WD-40 is classified as a solvent. So much misunderstanding about that.