Briggs & Stratton Twin Engine throttle and linkage setup

[@michaelbradford4444]

You answered my question because I'm having the exact same problem...Ty!

[@michaelmoore1557]

I had the same issue as Angel trying to put carb back on. Choke link and throttle link placement, as I forgot to take pics before removing it. Your video saved the day! Thank you!!

[@Lawnmowercare]

Glad it helped!

[@anthonyturner3953]

Mine has a linkage on the top of the car raider as well. But don't remember where it hooks to with the Spring. Do you have any pictures that you could send thank you for your help

[@CurtisVanchoff]

I've been searching for a solution and you have solved the dilemma. Thank you

[@Gilda1054]

Just what I needed as having problems with choke!!

[@HectorGutierrez-ml6jo]

Awesome video your a big help keep up the good work 😊

[@rickbroerman9267]

Great video 📹 👍

[@rickasisco]

Mine has auto choke, via a vane that is above the carb, to the left. It is normally closed, but opened when the flywheel is spinning and the fan on the flywheel blows the vane.

[@ggaguar4963]

Having the same problem on my 2015 T3000 24 HP same linkage as this video ,you would think they would put the better white plastic little square slide for the cable to slide as needed for Slow -to- Fast -to- CHOKE.... ,keeps bending cable, so i think like you did pull the cable as much as you can & tighten with a T-25 on a socket wrench ,. this video should do the trick to solve this simple stupid mickey mouse Linkage . - Thank you -

[@danoverton4297]

Great video. Thanks.

[@tomsheets6399]

Same engine but my riding mower has a manual choke control lever on the mower's console. Doesn't yours? When I move my throttle lever, just that roundish thing moves, nothing else. So is my situation different than yours - since I DO have a manual choke lever and am not having starting issues? My problem is: having my throttle lever at high or low makes no diference in rpm's. Is this a related issue that you are demonstrating?

[@Lawnmowercare]

Mine has a different set up. The choke is built into the throttle.

[@craiglapp8899]

my Briggs and Stratton vtwin engine is revving to high. Will the governor arm not lift the throttle back to idle unless the engine is running? Thank you for your help.

[@angelaal-salami3573]

I need help to correctly put the linkage back on after carburetor change….. struggling!

[@JasonHitch75604]

Let me guess, you put a new carburetor on and now it only throttles up when is it supposed to throttle down and throttle down when it's supposed to throttle up. Next time, take pictures or study the linkage of the throttle setup on this video.

[@joseberlanga4400]

Gracias

[@grtbluyonder88]

The dashpot does not seem to be connected to the plastic on the LH linkage. Is this correct? When the linkage moves up and down the dashpot lever never actuates.

[@Lawnmowercare]

It’s all connected in one linkage. It was out of a adjustment, but the choke is built into the full throttle.