Bright Tech Developments Destinations LED, Bright Dot and Numbers Power Blind, Arriva Midlands

Hello and Welcome back to my KZbin Channel. This is how this channel started a video about this Bright-Tech Bus Display *more information on this video below* There is also a number of videos on lighting from fluorescent lighting to low pressure sodium, high pressure sodium and light-emitting diodes (LED). There are also some other random videos mainly of things I have or like. Thanks for watching Dave.
In this Video you will see my Bright Tech Destination Set show ( Sorry I am Not in Service /
127 Shepshed, The OxLea / 127 Leicester / X3 Market Harborough / X3 Leicester / Sorry I am Not in Service ). Arriva Midlands 127 from Thurmaston Depot and X3 from Wigston Depot.
Front is a 240 by 16 Orange LED Display. Side is a 90 by 8 Bright dot Green LED and a Number Box Power Roller Rear (Backlight Not Working).
My Controller is programmed to work this set up, it is from (2261) Y261 YBC a Dennis Mini Pointer Dart. Front was changed to a LED after Power Roller Blind Failed and the Keypad Controller 'Chip Set' was changed to work this usual set up.
When Arriva went to Hanover Displays, Matt and myself had the job of removing all remaining Bright Tech Displays. We did 2261 before the bus was refurbished & repainted.
I asked if I could have this set and the management at the time said yes. Most of the old Bright Tech displays ended up in the metal skip for recycling. Some still remain at Wigston Depot 01/10/20.
Only Fault was Rear Display didn't light up (I fitted LED Lights seen in later videos), but now works with a Replacement PCB.
It is powered by a Omron S8VS-09024 Power Supply Input 240v 2.3A Output 24v 3.7SA found on eBay. (Costing around £40)
How to Program this display • Programming a Bright T...
Music:- Trancer by Gunnar Olsen

[@imacg3835]

cool

[@user-wm1fl3oj5z]

124 😍👍

[@davidlurhfan2005]

LED + Flip dot + motor display

[@davesbusstuffandmore]

Front Display was a Motor Display but failed when in the bus and was replaced with the LED. The buses controller was reprogrammed to work the set up. When the bus was refurbished a full set of Hanover LED displays were fitted. I managed to save this random Bright Tech Set.

[@mallguy8970]

The four numbers power should be used for the price is right contestants row bid.

[@ggpinza5528]

Mangyaring gawin ang X3

[@davesbusstuffandmore]

All of Them! as all the Leicester Destinations that going to be along video

[@philanthony915]

they must have the acot drive one

[@jaggass]

what version of winscreen do you have?

[@jaggass]

ive got an ex lothian bright dot.

[@patricksnest]

How do I get one created for a custom scrolling message

[@flynngerbach953]

Gunnar Olsen music

[@benhatfield4184]

Should do nxwm bus blind

[@martynd]

I've done a Coventry and Nuneaton display

[@martynd]

How do, any idea how you put custom logos on these at all? I've got front full size flip dot and Hanover software. Many thanks.

[@davesbusstuffandmore]

My Bright-Tech using Windscreen3 software does have custom logos Ie:- School (ALT 0142), Trains (ALT 0131), Ferry (ALT 0140), Aeroplane (ALT 0141), Disable (ALT 0137) and No Smoking? (ALT 0138) Hanover have Helen 3.2 software! see On The Shires Buses 3 Episodes.

[@jaggass]

i wonder how arriva did this. ive got a bright dot and also programmed for a powerblind.

[@davesbusstuffandmore]

I have Winscreen 3.3.8, There are 2 chips in the controller Top 1 has NRC_305 ARFX1_3FT 28/09/04 (Display's Type) ,Bottom 1 has Memory.

[@jaggass]

i have winscreen.3.3.8 saving up for that usb interface cable.

[@davesbusstuffandmore]

When Arriva got the destinations from Bright-Tech they were all Power Rollers Front and Rear with Bright Dot Sides with Fixed Memory. When Front Blinds Failed LED Fronts were fitted. New chips from Bright-Tech now with reprogrammable memory.

[@jaggass]

i might have to have new chips fitted

[@davesbusstuffandmore]

michael jagger press FNC on your controller code 99999998 Enter Select Function press 4, if Download shows Memory is not fixed and chips are ok.

[@benhatfield4184]

Where did u get it from

[@davesbusstuffandmore]

mini pointer dart, I changed the desplays to hanover some years ago.

[@prankstar7618]

Music plz

[@davesbusstuffandmore]

Music:- Trancer by Gunnar Olsen

[@jaggass]

can you give me a tutorial.

[@davesbusstuffandmore]

Using Winscreen 3?

[@jaggass]

ive started a list but dont know how to get a double dotted capital letter and the rest in lower case single dot

[@davesbusstuffandmore]

My display has 16 lines, so I set my numbers to 16x9, top row is 8x7 and lower row is 7x7. On Sorry size is 16x11 via is on keyboard next to 1, if text is too long hold down ALT key type 0144, 0146, 0147 or 0148 for small gaps between words 1,2,3 or 4 instead of 5

[@jaggass]

my bright dot blind is 7x84

[@davesbusstuffandmore]

How to use Winscreen3 kzbin.info/www/bejne/ZmrKZYCDnbB5jq8

[@MrMatanin]

давай завтра созвонимся по тю детей по дождь и папа в этом случае мы будем рады сотрудничать и папа и зжом в этом заказе по дождь к тому

[@altheaedwards6849]

09p

[@armenbodoyan810]

Ytf