BRILLIANT Ways to Use Your Oscillating Multi Tool! - WonderBlade™

[@stevenfoust3782]

Impressive blade

[@markgarland9000]

Earplugs young man..EARPLUGS!

[@emptyhand777]

WHAAAT?!?!?!?!

[@Loren460]

Huuh

[@timothygingras6939]

I love the way he speeds up the video while he’s cutting those screws and nails

[@snoopu2601]

Hay Mon thanks for the tip for cutting nails and screws on back of a board. I have nails and screws coming out of this head western back board I made with a bunch of stuff on it. I don't want to pull it out side and make a mess cutting it with a grinder. Thanks again for reminding me to use that very tool.

[@gfrank8058]

Also works great for cutting through silicone sealant around windows, showers, and toilet bases.

[@KrazyKZs_Garage]

Great little video with extremely helpful tips. And yes, I am new to the oscillating tool, I’ve only used mine a couple of times.

[@justacarny]

You should wear a respirator when cutting cement board

[@Loren460]

You should wear a condom

[@Kodiak660]

Nice trick with the nails, with the second blade you supported the tool against the wood with your other hand.

[@marsoelflaco5722]

I'd also recommend ear protection; ear muffs or plugs. 👂🏼

[@denningmp37]

Don’t forget the but plug

[@victormalgieri7733]

Also a mask when cutting the cement board

[@steelandtree3133]

Is that after market blade going to be compatible with any model oscillating tool? Even the cheap ones?

[@wonderbladetool]

The blade mentioned in the video has a Universal Fit and fits most oscillating multi tools, except for Starlock at the moment.

[@steelandtree3133]

@@wonderbladetool Thank you. Will check into it.

[@normandeline2339]

Blades matter.. carbide lasts much longer . Same with saws alls... I try to purchase only carbide Blades. Out cuts at least 5 times longer in my opinion.

[@ericanderson8556]

People ruin blades because they put too much pressure on one spot on the blade. Light pressure and move blade side to side.

[@dad1432]

Yes. And when using a circular saw, move it in a circle.

[@ericanderson8556]

@@dad1432 😂

[@randyscrafts8575]

When I'm gone on business my girlfriend uses mine for personal reasons.

[@jasonmershon3941]

Pics or it didn’t happen.

[@Recordeer]

Only thing these tools are actually good for. A little manscaping never hurt... Too much.

[@leeb.7188]

And I bet she can hardly wait for you to leave! 😂

[@randyscrafts8575]

@@leeb.7188 I'm watching her play with it right now. 😉

[@robertbills5666]

Just wait till you find her special reciprocating saw attachments! 😳

[@jeffday2574]

Hey if you use a knife blade type it will cut the sidewall out of tires it works slick and sharpens easily. It also can used with a hook blade to cut carpet

[@NateKern7]

Wicked! Thx for share. What mic are you using? 🙏

[@thisisyourcaptainspeaking2259]

Would this blade be a good choice for removing grout for ceramic tile replacement?

[@wonderbladetool]

There is a blade that is made specifically for cutting grout mentioned in one of our past videos titled "How to Cut Grout Effectively", we encourage you to check that video out.

[@codyponto8403]

Dry wall screws hit it with your hammer downward and it will snap, if you don’t want nails sticking out but shorter nails? Now cutting nails to something it get it out iv done that plenty I love these tools they are so useful sometimes but a lot of these seem like fixing things you didn’t need to do

[@katiemccluskey4603]

Thanks for good ideas.😂😊

[@larryrice2654]

Would be useful for nails, but sheetrock screws snap right off if you hit them to the side with a hammer.

[@garyforestier1118]

Titanium blades are the best and the only one that I use 😅

[@elainerussell924]

can you use it on surgery !

[@wonderbladetool]

Not recommended, our products are built for construction purposes.

[@johnwebb7882]

Knee and hip replacements it is best for.

[@clemmcguinness1087]

The original omt came from plaster cutting in clinics ...

[@UNoBugMe1]

We use them at work doing siding on residential property. Cutting rotten wood out and vinyl siding cutting. All the guys I worked with were not the smartest and didn’t know what to call this tool. One morning the boss’s son said let’s call it “Pete” since that day I’ve always called it Pete. Lol.

[@Duschbag]

Are you sayin that you have "Pete" in your hand all day..? 🤔

[@jogmeat]

I’m a dentist we use them for those tough teeth cleaning also go for extractions

[@Putridhela]

I use this to dig out the dried poop from my butt crack. Sometimes I get so full of poop that it just comes flooding out but then it gets dried up around the lips of my butthole and it gets caked on the skin around my butt and on the hair in my butt and I have to use this tool to get the poop out

[@Loren460]

I have my peter in my hand usually most of the day. Pete Peter trash garbage. Same similar

[@Loren460]

​@@Putridhelagross.....,are you happy now😅

[@Jodyrides]

I have a multitool. I’ve had it for about seven years. I have never used it. Mainly because I don’t know what it’s for

[@wonderbladetool]

An oscillating multi tool has its uses, one great use is for cutting out a hole in soffit.

[@johnm2617]

Dont cut copper tubing with it ! That cut looked like a beaver chewed it off ! The other uses go nuts < all pretty common used < That tool is great < 😮😮

[@MsAlice0608]

Save the blade and your ears and take a hammer and snap the drywall screw

[@Loren460]

If you haven't allready done so sing me "spoon man"..

[@Loren460]

Here for the comments

[@jeffreykennedy5956]

Just like a sawzall, they should give you the tool and then sell you blades.

[@todhog]

Is that Uncle Rico?

[@thecrittergitter7576]

An old standard blade isn't going to put as well as the other "brandNEW blade."

[@jamesaspinwall5280]

We have to come up with a short name for the" Isolating multi tool"

[@streetcrab875]

Wiggle tool

[@leeb.7188]

Not sure why he calls it an “oscillating multi-tool.” It’s just an Oscillating Tool; that’s it. But I call mine “The Oz.”

[@justacarny]

I call it the jitter tool

[@erikvaldez2627]

tinnitus in 3, 2, what???

[@jamesbarnes4191]

He ai t lying about the cheap blades tho. They wont cut metal

[@ginafeldman1652]

I don't know

[@philipw7058]

I hope all you people will ware a mask instead of breathing in those particles,this professional forgetting to tell you while cutting the fiber board

[@Loren460]

Meow

[@mic88ed]

Well then, why do they sale the cheap blades ? 😂🎉

[@jasonbone5121]

For people not cutting metal.

[@jimbefit3073]

Idk- first few tips were soo lame, ....I quit.

[@JustJohn-ie2qb]

Wear a mask, silly.

[@JamesEBraus]

Not so brilliant