This is by far my favorite version of Wing as well, but I just did not have any fun building this guy. I don't know if I just got a bad run, but I had to glue a lot of the armor parts on because of how easily they were popping off. However, once it was finally built, it just looks so damn good!
@corbingarrison71672 жыл бұрын
Same here, had to sand chunks off some the pegs
@thaddeuss.83325 жыл бұрын
Mecha Gaikotsu: *p- 🅱️aNdAi* Me and my wallet: *_DIES- spacito_*
HiRM is all cool and all but what I really want is 2.0 of : 1. HG Unicorn 2. HG Sazabi 3. All MG Wing Gundam 4. MG Exia 5. MG Sinanju
@MrFlunkorg5 жыл бұрын
Why would they ever 2.0 the HG unicorn when it's one of the most well-sold kits they've ever produced?
@nihar20015 жыл бұрын
A better Sinanju is in line. Sinanju is a very beautiful MS which hasn't been given justice.
@tristain05 жыл бұрын
MG sinanju is already great but it is not really for the new builders that don't have knowledge in painting. Although there are stickers and waterslides for it, the latter depends on your taste and what suffices your eyes.
@nihar20015 жыл бұрын
@@tristain0 what about RG sinanju. And the waist of the MG
@grimm36985 жыл бұрын
@@MrFlunkorg to make history repeat itself more successfully with better kits.
@JoesGunpla5 жыл бұрын
You missed the blue flaps can move that are in the middle of the wings and the red thruster sections on the wings can extend as well as long white part of the main wing down to the tips of the wings can also extend.
@xxnike0629xx5 жыл бұрын
Now if Bandai could make an MG 2.0 version of this.
@zoulzopan5 жыл бұрын
What's the scale of this kit? 1/100?
@judeskater935 жыл бұрын
Agreed, bandai really needs to make a 2.0 with the schematics from the mg wing proto zero which in my opinion is a pretty solid kit itself, the original mg wing Gundam EW was honestly a mess of a build, articulation was meh, the wings are really stiff, the plastic for it is pretty bad, it seems to be an even more aged kit than it should be, and was easily a small hand grenade.
@unbournx5 жыл бұрын
Not happening mostly..since already have this..
@msn-04sazabi55 жыл бұрын
@xxnike629xx Now if you could just shut up and actually start building kits from your ever growing box fort
@diamonshade74845 жыл бұрын
@@judeskater93 I would really love that proto zero
@callofmasterchief5 жыл бұрын
the Hi-Res Wing EW and Wing Zero EW look so freaking much better then the standard versions. Really wish they will make a HG version based on this design. Just for Kitbashing purposes and cus it just looks sexy as hell.
@tylerstocker61895 жыл бұрын
If you think the regular Hi-res Zero looks good, you should see the extra finish edition. Metallic red, blue and gold, with a pearl white. It's a pain in the ass to assemble, but looks gorgeous.
@tjtahoe77314 жыл бұрын
Just found this kit at my local hobby store, this review was the reason I bought it, very helpful and informative
@AssaultRider5554 жыл бұрын
So there was just a P Bandai kit lying around your local hobby store?
@Heroduothecomedian5 жыл бұрын
The 18 dislikes are random steves that surived oz base attacks from this gundam xD
@jadeenzzz5 жыл бұрын
"Is that a Gundam?"
@xoioti4 жыл бұрын
"Come at me Gundams" -Famous Last Words
@jakerack80515 жыл бұрын
I’m just glad he can hold his rifle *cough* Mg Wing EW *cough*
@Ultima0135 жыл бұрын
I don't even bother tryig to use it. I pose mine with the beam saber lmao However, someone told me you can actually pose it with the buster rifle if you swap the fingers with those of another Wing EW line.. I will try that !
You know I think bandai should've released this kit before wing zero and built upon this awesome kit because I hate hate pousing my wing zero custom
@imjustmessingaround68865 жыл бұрын
Good review mecha I picked him up yesterday and then used the god hand nippers amend I have no regrets
@joshuaoneill79884 жыл бұрын
I've been looking at the EW versions of the old Gundams... The 'redesigns' are sleek and well thought out. Now looking at this HG upgrade for EW Wing.... I honestly have to say, I like it BETTER than Zero Custom... Which is hard for me, cause Wing 0 Custom is my ABSOLUTE favorite. The supposed 'prototype' is sleeker than the upgrade and it looks BETTER.
@jadyndenys77362 жыл бұрын
I plan on eventually making a custom of the 2 EW wing Gundams since their rg versions share 85% parts
@ravenmanchester55165 жыл бұрын
The high res feels like an upgrade of the wing mobel suit
@LosIzmad5 жыл бұрын
I have that MG wing gundam ver ka. And trying to get it to hold on to the buster rifle is a pain in the ass.
@pixelman61935 жыл бұрын
You say link in description but it isnt there
@Schjoenz2 жыл бұрын
2 years after this video was posted, I am now here to ask you: Have you seen the bootleg version of this? It's MJH MG Gundam Wing HIRM Ver.Ka 1/100.. I have ordered one just now and thought to look for some review. And well, you have a review on bandai version.. the one ordered has more details to it. But I don't know about the fitting issue and more..
@possiblymediocre68535 жыл бұрын
The semi gloss you were talking about is called satin
@8474Starscream5 жыл бұрын
Awesome review. Coincidentally received this today!
@ChildrensCreed5 жыл бұрын
I got mine as well and so far it looks fantastic, but the thumbs on the hands fall off so easily for my kit. I just started it though and I'm waiting to get my tools to water decal it. Do you have the same issues with the hands?
@lordofgarbageprogenitoroft41475 жыл бұрын
@@ChildrensCreed you can try using the smallest amount of super glue to thicken it, and then sand it down until it fits snugly. Idk though, I mostly do that on HG kits so I'm not sure if it'd work for MG kits
@ChildrensCreed5 жыл бұрын
@@lordofgarbageprogenitoroft4147 I've been nervous to do that with finger parts since you move them so much, but I might have to. I've seen some people paint the joins in thicker coats to make it a bit bigger to fit a bit tighter too, not sure if that will be permanent though?
@snapbuildsph5 жыл бұрын
That glossy finish is just awesome
@sainturiel74593 жыл бұрын
Sd looks good too since i don't have money for this guy.
@Ton_D_Chicken5 жыл бұрын
Hmmm... The New Wing Gundam Hi-Res looks cool. Much less busy looking, the wings are lot more simpler... A lot more solid. Well, I truly am not into Hi-Res, but this kit seems good enough to try.
@Crash_Legacy_145 жыл бұрын
"the wings are a lot simpler and more solid" But that just just goes hand and hand doesn't it? The Wing Ver ka's always had a more solid wing versus the Zero EW because it was much simpler. The more complex you get the more points of failure you're going to have to take into account.
@regiginanjar71675 жыл бұрын
epic leg articulation for all the kit that bandai build
@fulgurkillua00165 жыл бұрын
lol i have the God Hand for like a year or 2 now and its been doing so good for me so cant wait for a detailed review from you
@Ranma_Leopard3 жыл бұрын
Just built mine last night. Although that dang lower chest blue piece kept popping off if I looked at it wrong so I ended up just using some Tamiya extra thin cement and it is now staying
@vustvaleo80685 жыл бұрын
i guess the die cast parts helps also distribute the weight as it can support its massive wings.
@gesie05045 жыл бұрын
I hope BANDAI releases a HiRes BARBATOS LUPUS.😃
@knightx6055 жыл бұрын
And Rex
@wraith28825 жыл бұрын
Sorry I'm late but they did make anothee form of barbatos. The 6th form
@Zaikclon9505 жыл бұрын
Idk if i wasnt paying attention but did you mention that this comes with waterslide decals?
@muhammadrifani19975 жыл бұрын
perfect review for perfect gunpla, can't wait u review hi res god gundam!!
4:36 best action-shot so far... can't unsee the Moon Gundam resemblance build. About the shoulder-vulcan hatches, are the inner-vulcans tilted down properly before closing the hatches?
@averagenolife68605 жыл бұрын
Great video, hey Mecha Gaikotsu would you consider a review on the BB Legends Command Gundam? One thing that I been wanting to know is the weapons and where their placed on the kit, strange thing but it's been bugging me. I know the obvious ones but others not so much.
@B-A-L3 жыл бұрын
I just read that this particular Gundam doesn't appear in any of the anime series? Is that true and does it matter?
@accelriderx29313 жыл бұрын
It's true. It's basically the equivalent of "Endless Waltz" redesigne for Wing (and Wing doesn't appear there). I believe some manga adaptations feature this design.
@elipsiclearts22844 жыл бұрын
I think that the MG zero ver ka will be much sturdier and will be a great replacement for the hi res
@Mobius101675 жыл бұрын
You should comparing the HiRM and the RG because I think both of them have a really good detail
I have the High Res Wing Zero special coating and I have to say mine fit very snugly as compared to the standard paint one. For some reason I think the special coated parts are slightly thicker and help parts fit tighter. Maybe I'm just crazy but I didn't have issues putting mine together.
@complexeddrummer5 жыл бұрын
So, I've recently gotten into airbrushing and painting on custom accents. Do you have any experience with painting the hi-res? I'm worried that when I go to assemble it, I'll have to sand down some bad nubs and end up messing up the Pearl coat and have to touch it up as well as adding panel lining. Do you or anyone know how easy/affective this is?
@ernestjhananesuto55705 жыл бұрын
8:27 that was winning fumina
@airwolf5585 жыл бұрын
Maybe the cover of the shoulder vulcans are not where they should be?tried to exchange both sides?
@PaszerDye5 жыл бұрын
3:50 Hey, Mecha. Just asking you to clarify. This is my 2nd time watching this, and I also just came from rewatching the HiRM Wing 0 Custom review as a refresher, since I'm planning on buying one. But in that video, you didn't mention about the vulcan hatches not being able to close. Maybe that wasn't a problem on the 1st? Or was the fact of it being a plastic hand grenade just so infuriating you just didn't bother mentioning it?
@anub1s155 жыл бұрын
just finished...wel still need to do the guns but about finished the high rez wing zero custom... i get your frustrations, also those damn hands >.> paint will get them to hang in there better but damn what a step back from most MG hands >.> (especially vs sazabi's ver. ka weird but awsome when done hands), also it's mounting adapter is quite janky, it needs perfect balance or it hangs to one side / or \ >.< definitely recommend a small tube of superglue for it as well had a couple parts that would just leap off first chance they got >.>
@abrahamambriz8925 жыл бұрын
Its wings are not just bird like for me, those are the wings of an absolute angel (I wonder how strong he is compared to EVA-01 XD), so this is the most heavenly Gundam ever existed in the franchise, isn't it?
@pokemonsonicgirl1234 жыл бұрын
I'd say Wing Gundam Seraphim is a bit more heavenly than Wing Zero.
@mikazukiangus41893 жыл бұрын
But the question remains.....did it remain as solid as it did during the review over time?
@toyhoarder48953 жыл бұрын
Both hip joints on my kit broke barely 6mths just sitting on the shelf. I need to get a replacement body/lower body frame. Really disappointed ☹️ anyone else have this issue?
@OtherMomo5 жыл бұрын
Do you think the upgrades stability has anything to do with a more stable inner frame, or is the armor lighter or separated in a way that allows more freedom of movement? What I'm getting at is, if they tweaked and fixed the frame, could you put the wing zero bits on this frame and fix its problems? I ain't planning on spending that kinda dosh to find out, and I dont expect MG to go thru the hassle of thaking them both apart just to find out, but it would be cool to know, is all.
@TheSeanSpillane5 жыл бұрын
Frame is the exact same. Material may be different, but its mechanics remain unchanged.
@OtherMomo5 жыл бұрын
@@TheSeanSpillane whatever they did to stabilize it, I hope they learn from this and make #4 that much closer to perfection
@tristain05 жыл бұрын
you should get the drei zwergs it has a total of 9 of them its kinda impressive and adds to the depth of the design
@therealding2215 жыл бұрын
I think you have the shoulder cannon covers reversed. You might try to switch them. I could be wrong but they look like they will fit better.
@supersayintrunks4 жыл бұрын
Isn't the waist suppose to 180 for the transformation?
@jennahcaballero92545 жыл бұрын
is this so much better than the mg protro zero or mg ver ka of the gundam EW? cause its so expensive
@quizongilad5 жыл бұрын
nice! first thing I do when I go to work is open yt and this is the first I saw today.
@lexxier13 жыл бұрын
Did he ever do a review of the godhand nippers
@flaviolucidi28463 жыл бұрын
can you repeat the video of HIRM Wing zero Custom? cause is the same of this kit
@shanewright3445 жыл бұрын
These High Resolution kits are just expensive eye candy. They look awesome, but they're flimsy and they constantly fall apart. For me, that doesn't justify their price tag
even as eye candy, they all tend to be different styles the the source material. not sure about everyone, but im a big fan of the early UC and Wing stuff... as in i buy the gunpla from the animes i like..... this doesnt make me think Wing Gundam, this makes me feel like a fanfiction version of the model.
@thomasg24885 жыл бұрын
Holy crap! They actually made something that actually can hold the f***ing Buster Rifle besides the anime version of MG Wing Gundam!? Maybe this won’t be a waste of $130 like the Wing Zero Custom Hi Res was!
@eomersimbajon29384 жыл бұрын
You know, any gundam can have a wing gundam like transformation if you just have... Wings, and a Shield. And flexible articulation. Ill leave you guys to think about that
@h20revenger5 жыл бұрын
I found my 00 sky Gundam in barns and Noble it's just I can't find anything on the extra parts if any know I want to know because I have no idea what the extra parts are for
@paulcang67525 жыл бұрын
Was waiting for this review but I pulled the trigger then bought and built the kit before this came out. Still good and bad to see that the issues you faced were nearly the same as what I went through. Awesome kit though!
@nefariael41895 жыл бұрын
That Hi'Res made the Ver'ka look like a HG.
@elijahbrown34795 жыл бұрын
is there a way to mix parts from similar kits? if so i would like to see a video of something like that being done. maybe with this video? who knows?
@alfianfahmi54305 жыл бұрын
Mecha, you may need an UHU glue for those loose C-clips.
@unbournx5 жыл бұрын
Knee section is weird and looks terrible when transform coz reveal hollow section..the beam saber attach wit a static peg.risk of breaking the peg to detach..should use a hinge for easy saber access
You mixed up the wing zero custom with the wing zero ew in the lineup at 1:45
@tunerfromhell13025 жыл бұрын
@0:36 the best content.
@chocoloko1015 жыл бұрын
Nice your review is just what i need thank you mecha
@gohst41743 жыл бұрын
I hate you mecha! You made me buy this kit!! Love your content bro! Peace
@mjpink233 жыл бұрын
HIRM TV version will be the BEST!
@AyBee97255 жыл бұрын
How does it compare to the Hi Res Astray??
@ludovicocammisa93205 жыл бұрын
The "ears" open up even on the MG...only there's nothing inside
@killer133245 жыл бұрын
am i the only one who recognized ash like snow from that VERY short bit played at the start?
@saubernard40074 жыл бұрын
It's a nice beautiful kit
@raffnerbautista93495 жыл бұрын
I WANNA ASK. WHO IS YOUR ALL TIME FAVORITE? SAZABI OR FREEDOM 2.0?
@raffnerbautista93495 жыл бұрын
PLEASE ANSWER. BECAUSE IM HAVING A HARDTIME WHICH ONE I WILL BUY?
@danpham86835 жыл бұрын
Which sazabi that you asked?? HG RG MG??
@raffnerbautista93495 жыл бұрын
@@danpham8683 The Rg Bro
@juancarlosmarquez72315 жыл бұрын
If it is a comparison between MGs, the Freedom 2.0 is the better posing kit while the MG Sazabi ver ka looks amazing. But if you are choosing between the MG Freedom 2.0 and the non-ver ka MG Sazabi choose the Freedom, the old MG Sazabi kit is not up to modern MG standards.
@hammadahmed61575 жыл бұрын
Hey any chance you might do a review on those 3R metal inner frames? I just built my frist mg freedom 2.0 with 3r's metal frame and boiii it is one hefty solid boi
@alexandercruz96675 жыл бұрын
how much will you sell that gundam for sure you get another one from your sponcers let me know if you are selling it lol.
@airbrushking98134 жыл бұрын
What stand will work with this kit?
@yongie135 жыл бұрын
try to kit bash it in HiRM zero custom, let see if it will fit..
@dan50935 жыл бұрын
Still nothing beats nor tie the mg dynames mecha??.. Maybe if they release the kyrios like the hint u said before..what do you think?? Haha so excited if it's really true!... Hopefully mg virtue ang ver.2 of mg exia too!..
@vincentjomiranda535 жыл бұрын
you can also say the box was GOD PUNCHED by the God Hands.. badumtss~~
@stephenjohnlim85295 жыл бұрын
Why dont they put panel lines in HIRM?
@kelajuan_5 жыл бұрын
Where's the link for the giveaway tho ?
@nicalcantara31914 жыл бұрын
Does the buster rifle split in 2?
@ClayDillonAuw5 жыл бұрын
Try switching the Vulcan Hatch just switch the right and left
@glenrussell52425 жыл бұрын
Maybe it's just me but i would still choose the old MG in terms of proportions. Yes the hi res detailing is insanely good, but looking at how bulk the body and how small the head is, it really bothers me. 😂 Well that's just me.
@insansiregar6158Ай бұрын
Can the cockpit open?
@37Kilo25 жыл бұрын
The hi-res Astray red was my very first kit, and I love it. The hi-res wing is in my back catalog, and I'm not really looking forward to it after this review. While the hi-res kits look great at a distance, you will have a hard time making the nib marks disappear because of the high polish plastic. Even if you cut real close with God Hands, it's a noticeable mark. If you sand it, well, you then lose the polish, which pretty much cancels the purpose of the hi-res models. All in all, I don't think they're worth the premium unless you're perfectly ok with noticeable nib marks.
@thornestark45215 жыл бұрын
Mine was a little deffrent the red on the wings was green and had the wing zeroes weapons
@AJCAAYA184 жыл бұрын
What Action Base does this use?
@ailehunter5 жыл бұрын
wow. this new kit is freaking good.
@bomberguy065 жыл бұрын
Can it self detonate?
@bryanzepeda93615 жыл бұрын
Hey mecha gaikotsu which is your favorite gundam from every grade Also asking anyone else
@yungshino33305 жыл бұрын
I'm new to the game yet I have 7 kits rn 6 are hg with 2 of those being hguc and one rg my beloved tallgeese ew I'm fine with hg but I really wanna get a mg but idk what to get since I'm kinda still new at the gundam scene so yeah.
@Overtrigger5 жыл бұрын
Every astray
@bryanzepeda93615 жыл бұрын
Cpt. Brotaku what about the MG freedom gundam Or of course MG Dynames
@seyrendante20485 жыл бұрын
for me hg full armor unit 7, well, yeah the sticker is kinda a lot, i mean, A LOT, but, hell, those shoulder cannon and the overall design is awesome mg is quite a hard choice between buster and gundam origin, i like the buster for the design, but the origin for how easy the build is, but if you want pure awesomeness but ok with the suit not being a gundam, then hyaku shiki 2.0 RE, is for sure, gundam mk 3, its quite tall, have giant wing binder, good panel line, decent amount of marking, with minimum amount of foil sticker, straight forward snapfit, hell this kit even have more panel line than most mg i have, but yeah, because this kit is re kit, some parts are hollow like the skirt and the shield, BUT! it have a premium but flap ;))))