Do These Things To Level, Mix, and Master Like a BOSS! 😎💯 (Easy Pro Mixing Guide 2020)

[@Trash-Beats]

I appreciate that u used like a “BOSS” rather than like a “ God” God bless u bro keep up the good work

[@lazychubs9902]

😁👍🏻😇

[@billiejean1284]

tf you would have done if he did???

[@burnout_beatz]

lmao

[@da4mula885]

Boss bless you

[@jaquitathompson7961]

*Spider-man meme comes in

[@marker710.]

"People like to over EQ, they like to make the EQ look all cool" 😂

[@marker710.]

"Producers think they are talented, but really bro don't be doing all that" 😂 keeping it💯

[@mel-bp1kp]

Did u just like and comment on your own shit lol 🤣

[@kpprod.9317]

Late but im one of em ong

[@prodjayweb3766]

It's funny because all you really need to do I take out the lows and boost the highs on some things

[@hiiambarney4489]

@@marker710. I mean, that's fire for your digital instruments... But you will probably need a lot of high quality EQ work on recordings that aren't made in a professional studio. Even then, it's sometimes debatable.

[@BroBeatzTV]

⏰Timestamps Important - 0:56 808/Kick - 2:53 Claps/SN - 6:46 Hats/Percs - 9:26 Melodies - 11:29 Mastering - 18:42

[@baronbakkerijsnippetsYSL]

Thanks for this!!!!!!

[@Bonzvy]

if you put the timestamps into the description then they will pop up on the time bar of the video ;)

[@angeloperry9001]

Aye, is the kicks and 808s are leveled to -6db? And what’s mono?

[@ChrisCeeStylzChavez6155]

Ahhhhhh HHHHAaa Good sauce Ingredients !!! I also noticed How You off Set the drum set more to the center reminds me the oldschool analog day. Setting the drum kits in the middle of all the other instruments not sure vfc really tested if theres a difference in sound

[@slimnickmusic1988]

A cool tip is to gain stage on the channel mixer to get a relative volume across all tracks, then level with the faders. (The mixer faders have less resolution near the bottom making it harder to do small adjustments) great vid too dude!

[@reshaunc2756]

agreed

[@alexfornell]

Great tutorial, but I just want to point out that if you put two stereo shapers with the same settings you are just cranking up the volume, not making it wider. I know it myself because I tested it with a stereo field analyzer and it literally doesn't make it wider. I know what preset you used so the settings are the same as yours. For widening your sounds I recommend mid side eq, much better than stereo shaper from FL. Check with a correlometer (voxengo span has one) the stereo field so you don't lose any sound when playing your beat on mono. I hope my comment is useful for someone

[@ClassEBeats]

Appreciate you waking us through the entire process!💎💎💪🏾

[@jayxlue]

Hands down most underrated beat tutorial page in the game. Great videos. No fluff. Straight to the point.

[@yurio67897]

everyday i realize that i need to learn a lot more, thanks bro beatz.

[@rakbeatz4196]

This man is very legit, bro I love how u make one every year and share the information that you have newly learned to make everyone grow with you

[@88keyz]

Back when I started watching how to making music on KZbin they mostly would show only the bare minimum the rest I would have to figure out on my own lol this channel he get straight to the point show what you need to know and how to do it simple just repeat the process just like bro showing everyone you should be good to go you can get deeper into it really tho you shouldn't have to lol 🙏🏾👍🏾🙏🏾😊

[@mrmack4444]

Ohhhh we! I see why yours beatz so crispy broski! Keep doing your thang and blessings us with your knowledge!!

[@officialraytracinggaming]

that piano melody hard af bruh.

[@jm.Beats.]

"So you can hear it, like you're on the phone or somethin." - BroBeatz 2020. Bruh that's the best description for an 808 distortion I've ever heard 😂

[@DocKaosBeats]

Back with another one 🔥🤘🏾

[@ayyrazza]

I swear I'm thinking about something I need to work on and my mans Brobeatz drops a video of it the next day😂

[@jrugeshjoshi6308]

I saw your many videos and I am still watching remaining. I must say they are super helpful and informational. Thank you bro. Keep posting. God bless you.

[@Bladebrian]

Bro, these are gems 🔥

[@S7V7N]

bro plz dont stop pluggin wid deez tutorials for sure helping me out!! 🙏🏾🙏🏾🙏🏾

[@anuragbhardwaj181]

Super mixing

[@ghoullyman]

thanks brother and i subscribed too love ya

[@freedanbeatz]

More one time, Thanks, man!!! You help me a lot... I'm from Brazil and i watch all your videos... Thanks again!!!

[@ferdim9997]

You're a big live saver man. Im so glad i found this video. Thanks pretty much!

[@OwnVybEntertainment]

Best mixing mix down i ever seen...

[@youngwallo]

Much appreciation Bro FrFr... I Can Finally Use My Beats To Rap ON Lol

[@habalistmizizi7979]

ur the best bro i have made so much progress since i started watching ur videos

[@88keyz]

Bro Is making it simple for the newbies lol 👍🏾👍🏾👍🏾

[@roelboon9880]

Ty so much! 🙌

[@BroBeatzTV]

no prob homie

[@VClassBeatz]

The mastering was cool. Gotta try it and watch the video over again.

[@lennartjibson5798]

Most helpful channel on youtube. Thank you

[@yowzidreamz2516]

This tutorial real helped a lot. Thanks. Everything looked well organized.

[@rafiqibrahimov5984]

Bro stereo shaper is like secret sauce it makes huge difference and sounds well

[@omarmajdi8598]

THANK YOU

[@stacystacksbeats999]

Dopest dude on youtube!!!!

[@jamalcole1985]

Thanks bro. Exactly what I was asking for.

[@thatboychub9963]

Good Job Bro... Been doing this but u made it make sense

[@jasperm.8093]

Appreciate you ty

[@PastorPande.D.C]

thanks bro this is what i was missing, just subbed 🔥🔥🔥🔥

[@reecethorneycroft238]

this may help my beats sound a lil cleaner. thank u!

[@victoregorov9055]

the trick with two stereo shapers is fire

[@milanogiovonni3524]

This nigga the real goat TEKURUMOTOKAKU was here

[@t1beats986]

Real sauce 🔥🔥🔥

[@djprodluigi]

BroBeatzTv This is soooo helpful dawg damnn thank you dawg. There is a lot I have learned form this channel and by doing soo my mixing game has become better and better hehe friends think I got my own studio ust because of the good mix I have applied. Thanks dawg once more again

[@jodyoliver1911]

Thanks a lot. This really helped me.

[@lorenzocarelse5154]

Bro you a FUCKING Legend 👀🔥🔥🔥

[@ProfitMoneyBeats]

Dope as always my dude thank you

[@MDUBeats]

Really helpful, Thanks for the gems bro

[@MbeatzProductionz]

I used to mix only but not mastering my beat And then, I stop mixing and leave it the way it was before because I didn’t know, what I can do to boost the sound Lol

[@SoundneerNetworkTM]

Hi G! Just wanna let you know that you can side chain the Kick to the 808 in the compresor. I've lurned it on the Chuki Beats videos. It is an ameazing tip, must try 👍

[@147Jason]

What ive been waiting for

[@nrizzy2109]

What about your fruity soft clipper settings ?

[@tslimm409]

Good video Bro

[@DonMadeThatBeat]

Early gang on a Sunday 😎

[@88keyz]

Yeah the hi hats do be a trouble mixing element me sometimes I never tried that lower the volume then mix the hi hats I'll try that next mix thanks much appreciated 👍🏾😊👍🏾😷

[@vishnumittu6386]

💯🔥👍 Helpful

[@syedsam]

great tutorial ! thank you bro

[@angeloperry9001]

Great video, Bro 🙏🏾💯 Thank you. Question, for kicks & 808s, you level both at -6?

[@NorManRaps]

Do you think you need to master a beat before an artist records on it? Cuz in that case there ll be the beat master and the mix master

[@zykobeats4976]

Lezzz goo 🔥

[@Byronic19134]

Why you mix that clap so low? I remember when Dre use to say he always made sure the clap or snare was the highest in the beat, now i don't agree today with that but still it needs to be competitive with the kick. Also you'd be surprised how much harder drums can knock by actually cutting frequencies.

[@musicengineer08]

I'm def going to try this. The beat I sampled on my channel sounds good n headphone but bad everywhere else..

[@LeeX12]

Jesus Christ forgive me God ....I swear this guy .....bro I wish I was this good....I'm hre to learn at 38years of age ...but more interested in what kinda beat he made again cause it always sound dope

[@omarmajdi8598]

THANKS A LOT

[@clintbriggs674]

Ok bro so I literally took notes in wordpad on my computer and used snipping tool to take screenshots of ur settings and everything. I turned the video into a 2 hour process. I wrote down the steps in order and then started to work on a track. Obviously my sounds were different and it was a different song but I balanced all my sounds the same way to the same levels. It all sounded good together. But when I put all my effects u had on the master track it clips for some reason by like 3 dB. It shouldn’t have done that. I literally did everything exactly the same, I followed it closely. It sounded much better with the effects but it clipped. My volumes were all the same as yours. I don’t get it. Love ur stuff. Keep it up bro

[@BroBeatzTV]

Yeah its not going to be exact, you still need to adjust your levels no matter what. Just turn your sounds down a few db until it isnt clipping but make sure you keep the same ratios

[@SoundneerNetworkTM]

Could it happen to be a problem from the speakers?

[@neruthpacheco6474]

This happened because your sounds are not gain staged the same as his sounds. The volume knobs on the mixer can be the same but the db of the original sound might have way more DB than of those he has on the video.

[@Mdkumi]

ok but what does your channel rack look like not everyone has the same sounds what is normalize what sound has the velocities raised all the way up

[@czabeats2964]

Love your tutorials they dope af. One question though why adjust the levels in the mixer and not the channel rack?

[@psychologicalboi5640]

everyone levels in mixer bruh o.O

[@psychologicalboi5640]

in mixer it's exact numbers on frequencies

[@czabeats2964]

Lovro Past ahh I see . Thank you fam

[@Algel]

do u touch the volume knobs in the channel rack before the faders?

[@gl0rifyee]

so much sauce

[@MB1z]

Thanks, appreciate it. I have ozone but I still want to know how to get a good master without it.

[@Alairo]

i hear munder on my mind drum pattern here

[@nedsmith7779]

Please help? So on my fruity db peak meter that I opened up in the effects slot on one of the tracks, the peak value at the top holds there for soooooo long before it drops back down. The bars themselves fall down quick but the little things that show u if u are clipping or not stay up there for soooo long and it is annoying.

[@BroBeatzTV]

You might need to change your gui settings to a lower setting or change drivers

[@nedsmith7779]

@@BroBeatzTV Whether it works or not, thanks for hitting me back and trying to help me dogg, I am big fan of your vids and look forward to more :)

[@jkbrr7118]

Do you recommend output arcade?

[@88keyz]

🔥🔥🔥🔥🔥

[@westsidevicious]

You sound like Polo G

[@mikekeyz9988]

How do you get beat louder for youtube

[@dotboycyrax]

Can you do a DRUMS tutorial, i really need help....

[@FilmMusicComposerGuy]

Bruh I got 2 12 inch subwoofers in my car and that waveshaper not it. I rather use Bass Booster than the waveshaper

[@NVH2001]

How to mix a Big kick

[@88keyz]

👍🏾🙏🏾👍🏾

[@futerpowerflash8147]

Are you free kits free for profit ?

[@takovayde8497]

bro im still learning buh i saw some other tutorial where they gain stage all the drums at -12db and the melody and the bass @ -18db where you can get headroom ???????????

[@rafiqibrahimov5984]

Bro in video he literally makes it and later adds gain so he gains headroom

[@takovayde8497]

@@rafiqibrahimov5984 oh okay thanks bro I appreciate

[@goodguyvukic_tdkm]

And what's with soft clipper? Do I just throw it in and leave it be by default?

[@shantoghagra5926]

Adjust the threshold only

[@goodguyvukic_tdkm]

@@shantoghagra5926 Okay, thanks ^^

[@BennyParcher]

I hear some people say that you dont need eq if the sample is good. Is that wrong?

[@corranv]

To be honest with you it essentially comes down to what YOU want it to sound like. 'Good' depends on the persons preference, so the better question to ask yourself when dealing with a sample is how does my sample sound in relation to the rest of my sounds. For example if you had a very bass heavy/low frequency heavy sample it could be a good idea to apply a low end EQ cut, thus to ensure your sample doesn't class with your kick, 808, and other bass heavy/low frequency sound. You should keep in mind that won't always be the case, and as everyone says the best way to get to know what you need to EQ and what you don't is to just keep making beats, slowly but surely the process of EQing will become much more intuitive

[@prodcyb3rluv]

IT'S COMING ABOVE 0 DB WHAT CAN I DO

[@balakebeats5590]

Lower the volume 😂

[@Jayyy2timez]

Is the 'The Complete Midi Scales Kit" ever going to be free I don't have bread g

[@alessandro-wu9pi]

Hi

[@88keyz]

And he using stock plugins lol bro giving it straight no chasers on it lol you don't have to go buy anything else basically lol

[@sotightwitit9513]

great tutorial fam

[@j03y2890]

Thanks to this entire producer community, between Brobeatz, Kylebeats, CurtissKing, LarryOhh, Producergrind, ALWAYS have something to wake up and learn on here.

[@DonMadeThatBeat]

You named nothing but goats 🐐

[@flgangcage6313]

Ya Get me!!!!!!!!!!!!

[@Byronic19134]

MG The Future, CMP, BusyWorks and Ave McCree the Gods of this community

[@j03y2890]

Don MadeThatBeat all of them bro! For someone like myself who only has 6 months of producing under their belt, means so much to have people willing to teach the most basic and most comprehensive techniques. And a community OF producers supporting each other. Too dope

[@j03y2890]

Vincent Salamatino I only know BusyWorks on that list but I’ll have to look into the other few. EdTalenti too if I didn’t mention him as well.

[@Des_Armoni]

Can u make a video using XLN audio drums & how you would balance “live” or acoustic drums? Thanks bro u are killing it!! Maybe make a daniel caesar or giveon or licky daye tutorial? 🙏🏽🙏🏽

[@edintheproducer6580]

So you dont do any gain staging in the channel rack? You send your sounds full volume to the mixer?

[@JuOutdabottle]

really would like to know what the gain staging looks like before this vid 💯

[@BroBeatzTV]

no, i never do unless its a beat i care about but i haven't made a specific video on gain staging yet so that why i didnt include it because i dont want to confuse some ppl

[@edinzulovic3599]

BroBeatzTV can you do a video about a beat you care about? So you wouldn’t recommend doing it this way than since you don’t care about this beat? Great content bro

[@botpurple3894]

ho do you get it to show the wave and not just the bars in the mixer

[@uubeats7581]

*Protect this man at all costs*

[@rolliebeatz713]

verry helpfull, i will try out this technique.

[@woaye]

I know this is a fairly old video but just a general question. On the master after all of the effects and such, the soft clipper of course doesn't let it go over 0 or -6 db but is it okay if the visual shows yellow instead of a solid green. I wish I could explain it better than this. I guess is it okay if when the bass and clap and kick are playing, the mixer current shows yellow instead of green? Thank you.

[@balakebeats5590]

If it sounds good it's good 🤷🏻‍♂️ use your ear

[@tanner953]

If you're playing your mix in whole, yellow is fine. Red means its at or over 0db.

[@woaye]

Thanks homies!

[@emmarcometravel2856]

💡💫💯

[@LauricBeatz17]

Great Video,Bro. Your tutorials help me alot. Thanks man. 💪🙏

[@oneanonly69]

Very helpful I usually just make the beat and it sounds good but im starting to flavor it up even more when creating something amazing. So thank you so much for all that you do because without your content I wouldn’t have been able to level up.

[@Mdkumi]

sorry bruh that maximus aint hitting

[@Wadyofficial8]

Very helpful bro. Thank you

[@Summorial2]

why i can't download it's says thats please fill out this field ? edit: it worked thank you