Broke & Fixed the World's Strongest RC Car

[@samrc8017]

Hello Kevin! Your videos are great and you have inspired me to make this KZbin channel! I'm sure that you are an inspritration to all the people subscribed to your channel 😊 Have fun and good luck for the future 🤞

[@KevinTalbotTV]

Thanks bro, good luck with your channel

[@samrc8017]

@@KevinTalbotTV Thank you Kev 😄

[@channelofrandom6422]

SamRC YT deez nuts

[@redline8000]

Me: I'm bored Kevin uploads Me now: best day of my life

[@easondailey6316]

CrazyGriff 108 omg sameeee

[@redline8000]

@@easondailey6316 I know right

[@ethankey5805]

Same

[@braedenhanson1180]

Same

[@nataliagarozzo4774]

Same

[@ethanthatcher5321]

I love wrenching videos it's the 2nd main reason why I watch because it's so interesting

[@rccarnage580]

I’m constantly on the bench this weather...

[@Crewchief227]

I have mostly (actually more) of the same upgrades on my Outcast. A little tip: If you take the top two ears of the bulkhead and retap them to M4 screws the wing will be way stiffer. But M4 screw heads don't fit in the RPM wing mount, so put them in a drill and sand down the heads till they fit. Also the rear mount screws can be lengthened, but the lower diff access screws pass thru the mount screws channel, so measure the depth with a driver first. If you try and put too long of screws in you'll crack the base of the bulkhead.😉💪

[@richduperbash2966]

Awesome stuff Kev 🤗!!!! You do a great job with the bench and wrench vids Brother 👊. Great close ups, tips, and technique. Super helpful for others too. I'm digging those 7075 hubs 👀. Not sure why that rear brace bent though 🤔. I'm guessing it was 6061. I've never seen a 7075 chassis brace go bendy like that 👀. You're absolutely right about hard hits taking out electronics 😱🤣🤣. Hope the next servo hangs in my friend. That cushion under the motor certainly can't hurt. 🍻🤙🤙😎💪👊👊

[@9tailspiritfox]

Hope you See This Kevin!? Hey Kev Mate Here’s a Suggestion to Stop Servo Shock Breaks: get some Nitro Fuel Tube and Undo the Bolts that Hold the Servo Mount then Cut 4-5mm and put over each Bolt then Thread Lock the Bolts and do up Finger Tight as in just tight enough that it slightly squeezes the tube then Leave a Day to Set then Most Impact is Taken Out and You’ll Find it Sometimes Saves you Servos When Crashing Hard with Wheels ok buddy?. 😎👍

[@Slikx666]

Yet again Kevin you've made a repair video that's given me some ideas for my projects. Personally if you make a repair video and just talk I'd be happy to listen while getting a job done. 👍

[@mikebrown7194]

Every RC enthusiast enjoys a workshop video Kev. There's actually not many on KZbin cos as you said, takes a while to edit to create good content. Keep em coming.👍

[@KevinTalbotTV]

I find wrenching vids boring to edit and it makes the whole wrenching process a pain in the butt. It brobs takes 5x longer to fix when filming. If enough people like it I'll do a few more every now and then

[@ValleyRC]

When you think to yourself "that wasn't even that high" and you realise too much KT has desensitised you into thinking a 15 foot drop onto one wheel isn't much!

[@SteliosRcdrift]

Use the rubber grommets when you install a new servo.they absorb many of the vibrations.they come on the box

[@KevinTalbotTV]

I have done already but thanks :)

[@9tailspiritfox]

Kevin Talbot Hey Kev Mate Here’s a Suggestion to Stop Servo Shock Breaks: get some Nitro Fuel Tube and Undo the Bolts that Hold the Servo Mount then Cut 4-5mm and put over each Bolt then Thread Lock the Bolts and do up Finger Tight as in just tight enough that it slightly squeezes the tube then Leave a Day to Set then Most Impact is Taken Out and You’ll Find it Sometimes Saves you Servos When Crashing Hard with Wheels ok buddy?. 😎👍

[@9tailspiritfox]

Hey Kev been away a couple days so glad to come back and binge your awesome videos! But had to come on and say I love the fast forward Repairing in this video mate! It’s Brilliant! I just Hope you do more repairs with the background music! Just Love it! Keep up the Awesome Work Buddy and I Hope you see this Comment! ✌️😎👍 All the Best!

[@brandonbecker6617]

I miss the slash 4x4

[@liamb9249]

Hi Kevin. When you change a spur gear or pinion gear which one will make the car faster? Both or one of them. Thanks.

[@bobby6715]

Bigger pinion, smaller spur. Both will make it faster

[@OffRoadRC918]

Awesome ♥️🧡💛💚❤👍 Re-extracting metal parts that have been bent after being damaged is a temporary solution. The structure inside the metal changes and is bent better. But metal is more expensive, so let's spread it and recycle it.

[@jonvoogd511]

The XO-1 isn't uncontrollable ,it just needs a better set of tires.

[@99thpeanut59]

Any decent savox will. I know you have experience with them and don’t like them, but please, take my word for it. They’re not the most precise and they are extremely power hungry and extremely noisy, but they are ultra reliable, super durable, and monsters of torque.

[@KevinTalbotTV]

mmmm maybe! But everything you just said about them makes me not like them. But if they take a beating, maybe the way to go!

[@kylem.4000]

I know i always watch the wrenching videos, They may not be that popular but the people that do like them (like me) love them.

[@TonyBulliard87]

What about some sort of rubber motor mount kinda like a real truck. It would accept that heavy vibration from the tall jump

[@epselin5947]

Hey kev!!! I love the wrenching videos, and I see them as cool because the cars most of the time look destroyed, and seeing it fixed, it is just cool to see, while I am commenting, can we get another infraction video please 👏🤔🤔

[@bustersbashers2280]

I like watching people do repairs, some live & some recorded, I’m watching and learning because I have not built my TRAXXAS cars etc so unsure what goes were. If I’m honest, , , I’m a little scared to take mine to bits to put lock-tight on. Great vid Kev mate 👍👍👍👍👍👍👍👍👍👍👍👍❤️

[@9tailspiritfox]

David White Hey David! Listen buddy don’t be scared just make sure to do the things Kev suggests and take photos if you’re not sure u can remember how it goes together or if you need to leave it in pieces for a few days Incase waiting for parts ect.. but Honestly if you like watching RC Repair Videos I Almost Guarantee you’ll enjoy doing it yourself! Just Try not to “Need” Repairs too often.. or you’ll find it a chore.. Just Give it a go At least Once on Each RC Type, Cool? ✌️😊👍

[@bustersbashers2280]

Max White Thanks buddy . 👍👍👍

[@kugle1876]

Just how fast can you get an XO-1, as in like 8S and overgeared anda bunch of otherr stuff.

[@karrcrash9589]

It would be cool if Kev jumped that flat out

[@KevinTalbotTV]

it seems uncontrollable as it is!

[@karrcrash9589]

I would probably get really damaged on landing too

[@karrcrash9589]

Btw I just started a RC KZbin channel called Karr Crash and I am just about to start filming and see how well my TRX4 does in deep-ish snow. Thanks for inspiring me to do a channel

[@nicksrc4487]

you could probably get it to go 200 mph LOL

[@jakemorris6953]

I love turning screws by hand I work with Pipe organs and it's the preferred method. Just like you said keep you from stripping screws and keeps the treads of hundreds of years.

[@_traxxas4_]

More traxxas

[@ianhill20101]

On scale it's like a full size car jumping 300ft high

[@ytbb123]

Kevin, maybe you can look for the HPI Savage Super 5SC brushless motormounts. They support the motor in the frond, and in the rear. It's like 2 clamps all around the motor, en superstrong. Maybe it work out for you, to keep preventing to bend te motors.

[@charliezdybek1882]

Take your shocks apart and put one cm of nitro fuel hose on the shock shaft and it will work as a bump stop to soften the landings like a real monster truck

[@jive7777]

Nice work as usual Kev! I was wondering what Go Pro do you use? And what is the sticky stuff you use to adhere it to the truck? Thanks!

[@OrangeFlame1]

"World's strongest RC car" *Breaks from a 2 meter jump* Nice

[@9tailspiritfox]

Orange Flame it’s because he had the throttle on when it landed.. would break any RC.

[@milesclokey925]

Hey Kevin, not sure if this will work but what if you put a thin piece of rubber then put the expanding foam under the motor so the foam will give the motor cushion while under that you have the rubber that will give it more of a firm support, but still not as bad as just hitting the chassis.

[@PeasantNo.471]

Or a gel pad...you can get on banggod...i use for my motorbike to get a more comfortable seat

[@wendyon4517]

These quick wrenching vids are great. Say what went wrong, what you are using to fix it, what troubles you have doing it and then another half video of bashing.

[@time8953]

You should turn the 100mph car in to a rally car

[@YoungWide]

Get aluminum diff cases maybe @Kevin tablot

[@NickT6630]

The servo might last longer if you take it apart and fill the area around the electronics with silicone sealant. Just an idea.

[@KevinTalbotTV]

goo idea dude

[@sherryburry9642]

You inspired me to get a RC car I love you Video

[@nashanya4262]

The fact that you jumped that into the stratosphere. I think that outcast is very strong. Awesome video. 🤙

[@ronniewilliz153]

Put a thin peice of high dense foam under the servo between the servo an chassis helpd my stock servos last

[@chubs6362]

do a skate park video with the arrma infraction!!

[@Brandumb]

ARMMA TOUGH BABY!

[@zazalarkin3675]

First I love your vids Kevin keep up the great works and d can u reply to this comment what is a good buggy 10 scale for indoor racing

[@stewartyoung5780]

If you are damaging the servo through chassis hits, could you fit a shallow servo to gain clearance under the servo. It would eliminate the issue of chassis hitting the bottom.

[@Night0v0]

So much for being worlds strongest! Now bow down to the XMAXX.

[@ksprr6856]

Xmaxx is stronger in stock form :D

[@lexsteel12]

Kev, why don't you add more damping to the shocks? You can also add the CEN Racing steering rods to the car. Those are beefier. And you can also add double shocks for better damping when it lands from those big jumps. I saw this guy do this to his Kraton 6S. He has his own channel on KZbin. Track13? If I remember correctly. His set up was bulletproof.

[@KevinTalbotTV]

Ive found it better to bottom out, too stiff shocks kills bulkheads, towers and shocks ive found, and also the dont handle good.

[@afterrunrc9935]

I'm always happy to see a wrenching video edited or not. Although if it's a live stream its only fun to watch it live since there is a chat with other viewers. The issue for me is wrenching streams always happen when I do not have time to join and watch.

[@CF_Joel]

I like the wrenching/bashing combo!

[@averyanderson6945]

Those aluminum hubs will blow out the bearings faster

[@bobby6715]

Look at savox servos. Spendy, but worth the price if you want the best servo!

[@ray_6677]

Where is your kraton 8s? Get justbashit or m2c chassis so you can start sending it sky high? Would love to see hard bash videos with this truck. Keep up the good work making videos kev!

[@eddielane9569]

So hard to believe that beast got broke. I guess it must weigh a bit.

[@tblk2186]

If we brake them it's good to learn to fix em🤙

[@elihaugh4162]

If you want an easy way to ramp your rc's high and fun you should use the lacrosse catch-back things that launch your lacrosse ball back but it fou use it as a ramp it is great. Me and my nieghbor do it all the time and these cars go about 10-15 ft in the air and these things do tons of flips and we just do it all day and its awesome. You should totally do that!!

[@yepnope4309]

PowerHD DW25LV servo is what I use in my 6s kraton and erevo and never had an issue. Plenty fast and super strong for bashing. Not made for racing but actually for crawling but for me it's been an incredible and durable servo for over a year in both vehicles. Good luck and thanks for the videos!

[@yepnope4309]

Haha just got further in the video and see you use the exact one I recommend in your outcast lol. So you already know how good they are

[@innovativerc7155]

Another great video Kev! 👍You could try a BK servo???

[@michaelpercell2227]

Try putting some double sided tape under the electronics it cushions the blows a little bit better

[@michaeltrindade7225]

The servo i use in my arma senton 3s blx is the powerHd 25kg. I replaced the standerd arma servo about a week or 2 ago and this one us strong pretty fast and its ben taking some hard landings

[@NitroMike]

Did you just call an Arrma the strongest car in the world? In what alternate universe am I living?

[@easondailey6316]

I have a kraton I don’t know if I should have gotten a outcast

[@zazalarkin3675]

The kraton is class

[@stack8778]

It was definitely a pretty short outing unfortunately, but maybe after this weekend at PaddlesWorth you can do a live stream with all the units your going to have to fix , lol I’m not trying to jinx you , but we all know you by now and there’s definitely going to be some carnage and obviously repair work usually goes along with that ! Play safe this weekend and have a good time ! 👍✌️

[@KevinTalbotTV]

Paddlesworth is not till may

[@stack8778]

Kevin Talbot Sorry , I thought I heard you guys talking about Paddlesworth this weekend, if it’s not Paddlesworth then where were you guys going this weekend ? Wasn’t Claire and Ian talking about going somewhere this weekend ? Thanks

[@insectking7050]

You should try putting really tiny wheels on the x maxx

[@jean-philippestiee3527]

Tumbely wobbly -> Wrenchy benchy

[@tabdougherty8549]

I might not like it right now but, I think I end up watching them all in the end. Just good entertainment for me. LOL

[@dantedesormeaux5058]

I love the arrma outcasts!

[@trailtrekkinrc2252]

I like the edited fix vidoes

[@jaco_bester_only1]

Hi Kevin big fan, love your video's

[@aidenleverett5103]

Hey you should use a rubber mallet on those aluminum parts

[@hafjellrc4544]

Toomorrow i have birtday i hope i Get money i want to buy a slash

[@zazalarkin3675]

Buy a arrma 6s the are class I have one myself

[@zazalarkin3675]

Senton 6s

[@hafjellrc4544]

I think Its to expensive

[@wildlifecontentoffi]

like when u repair ur truck man!

[@Mail-ke3kj]

Get the savox SW0231MG Sent mine 30-40 feet in the air with my kraton 6s with heavy Proline trenchers on the front, still works

[@2shoestoo]

I watch them while I’m wrenching on my 🚙

[@youraveragecoop5633]

This is why I started watching a couple of years gone bye. Thanks Kev!

[@jfolck1886]

I'm sure you can swap out parts with your eyes closed at this point but watching you go through the process this time was giving me anxiety with all the parts flopping around LOL

[@user-dz2jv4in5z]

You should get a hobao hyper sste truggy it's based on the sse which is basically a hyper vs. I hear they are good.

[@steveblackbird]

Cheers for the vid Kev, Quite like this format.. bit of driving, crashing and a little wrenching too... not bad for 15 minutes... at least you didn't "finish it!!" with the outcast hahaha..

[@joshsrcs]

Kev can you take the Infraction along with you and play with it at the skatepark or just wherever. I love that Truck!

[@KevinTalbotTV]

haha maybe!

[@kanebrady6185]

When does the Arrma take the Xmaxx challenge into a flat wall at high speed? 🤔

[@GTRacingblog88]

Your front shock shaft on the right looks bent just so you know.

[@Er4zor845]

Hi Kev. Try the corally 5226 Servo.

[@Stickies72]

Your videos are great man, wrenching, chatting, hanging out with the gang doesn't matter. More Wrenching videos for sure, you have good ideas on things and can share them with everyone!!!

[@fargonianproductions2767]

Hey Kev, what’s going on with you building your monster truck?

[@Basherqueen]

Hi Kev, I have no probs with the PowerHD Servos. I got this tipp once from you and run them in all my rigs.

[@KevinTalbotTV]

Hey kimberly, yeh, my power hd in my outcast is still perfect too :)

[@rcplayer7581]

They are good. But like you said kev. Its the impacts and one lasted longer its just luck so i stick with hd or even the 20 25 kg ones that are really cheap , i had burnt out my favorite jr racing servo i had for many years and would STILL have if i didnt put into the kraton lesson learned 😆 🏎🏎🏎🏎🏎

[@rcplayer7581]

Put piece sticky foam or piece of pit mat under the servo. It might help the shock even wrapping the servo insulating to also prevent the shock

[@daleahrens553]

Kevin, I'd like to see ya take the arma truck (the 80mph) made for street or smooth track and run some drifting and high speed turns and corners... I dont wwnt ya to smash that truck it's the most beautiful looking shell and stance of all the smooth track or street racers I've seen...

[@user-gr3nj6id3m]

Hi kev can you do rc cleaning vid because i am curious how do you clean your rc's. btw your videos are great and you have inspired me to buy my first xmaxx good luck and thanks

[@JohnConnor12]

I enjoy these wrenching videos more than most of the videos with banggood specials and all that. Not always, but more often than not. I can definitely see it being a pain the in ass though.

[@RcKing-jk2yi]

Hey Kev don’t you think a 1/10 would be the best for bashing because of the size. Because when you drop tested all the cars it was the smaller ones that were stronger. I think you should build the ultimate 1/10 scale custom rc basher

[@davidboyd4026]

My favorite kind of videos

[@jonathanromero9026]

Try the Savox .15/277.7 Aluminum Case Waterproof Coreless Digital Servo, it’s a really good service and it’s supper fast!!

[@levi9403]

First leeests goooo!! Kev can u plz do some more vids with the UDR it's one of my favourite rc cars

[@THAT0NEguy-t2b]

It's one of my favourite to he should use it more

[@lukenukem1164]

I do enjoy these vids, nice one. Do you think you'll be getting a mad van? The kyosho. Looking at getting one for my boy but needs the Kev seal of approval.

[@hubbearing4120]

Watched all the way through. I like the bench videos. Also love the bashing.

[@hafjellrc4544]

Hi kev you Are the best KZbinr i am from Norway hope you SEE this comment See you later My freind

[@zazalarkin3675]

What's ure budget

[@hafjellrc4544]

Carlifestyle 2021 i GOT 3000nok thats mean 337,44 dollars but i Hope i Get like 2000nok= 224,96 dollars

[@d5O5]

Kev, you should not use that CNC parts cause they aren’t flexible. Every bumps goes straight to other small plastic elements.

[@KevinTalbotTV]

I have rpm arms so enough flex there i hope

[@jaxonreimer3669]

love the vid and could you plz do a review and unboxing on the latrax teton, works better with a micro savox servo. thanks

[@Musiquence]

I like the wrenching videos. Those Kratons look pretty much the same design as the JLB Cheetah, right? Well, it's the other way around, of course. :-)

[@rc_dubai]

hi kev, you can use the dsservo 25kg esc. I used this servo in my car, and It can take around 15 m landings easy.

[@kassm9919]

Hey kev please review some redcat stuff. Also if you could do nitro vs electric bash off that would be amazing

[@bigbeardsniper3058]

Your so awesome I think I'm gonna make these types of KZbin videos I got an stupid Walmart car right now but I'm getting the xinlehong 1326

[@NitroMike]

About your servo's and other electronics dying. Why don't you put foam under it so that dampens the shock? My Inferno ST also has a lot of foam in the reciever box for that very reason

[@KevinTalbotTV]

Yeh good idea, not sure how i can do it to the servo though

[@NitroMike]

@@KevinTalbotTV just shove a piece of foam between the servo and the chassis like you did with the motor

[@dwaynethayer7868]

Fix break repeat just part of the sport keep up the good work

[@713Ace529]

Man, why don't you set up a chute when coming down to slow the speed thus the impact. just a thought.

[@scottnewing5115]

Do more it is so informative because i have just gotten serious about rc life