Hallelujah! I did it. Even though I’m a handicapped person with limited strength in my hands, I was able to take out the chip, It was actually not that hard. I was already stressing out by just watching another video in which the person made it so hard. But thank *Jesus Christ,* that your video, among a few others, made this quite simple. *God* bless you and your family family sir.
@ThePackDad2 жыл бұрын
My sister's only key broke like this today. She's headed back to KY from MD tomorrow so we're getting the $300 key from the only shop that has one (35 miles away in VA). But I'll repair her old one and send it to her so she has a spare. Thanks for the key tips !!
@mikeschill44032 жыл бұрын
Good video- my 12 civic exl chip was in the keyless entry module, it was not separate on the side of the case. Took me 30 minutes to figure it out lol
@kenzisdad02 Жыл бұрын
This is silly. Why wouldn't you just swap the whole key part into the new shell instead of having to get a key cut? This kinda makes no sense
@lauramilleryoung60623 күн бұрын
😂exactly what I was thinking
@avgrim7729 Жыл бұрын
Why don't you use the same original key?
@brendawilliams22432 жыл бұрын
This was very I mean very helpful because I lost some of my key fob.
@ramontravel2304 жыл бұрын
Thank you so much, I have my fix and was able to use the same key, greate video, just purchase a new case on ebay and place the chip
@davidknox17582 жыл бұрын
Worked perfectly!!! Had to do a little surgery on the broken FOB but other than that it went pretty smoothly. Just use a SHARP exato knife and take out the entire chip housing!!
@r.leenerts62484 жыл бұрын
It would be really helpful to have seen how you got the chip out of the case without damaging it. That's an important step and you did it off camera.
@patricklucas80083 жыл бұрын
He used a sawzall with a semi blade pulse a hammer and pry bar to open it
@shopgirl_ny1523 жыл бұрын
@@patricklucas8008 Wow, funny.
@ShaggyDawg2 жыл бұрын
@@patricklucas8008 😂😂😂
@Bueno.salinas Жыл бұрын
This happened to my key today 😭 thanks for the info!
@anndalessandro-zuck12565 жыл бұрын
Thanks! Just wish you had told us how you got the chip out because I had the same problem and didn't know how to get it out.
@CtrlAltDefeatTV5 жыл бұрын
Nothing fancy, I just used a small flat tip screw driver and pried the chip out of the old case
@TeaSesh5 жыл бұрын
So you just bought a new one... U DIDNT FIX IY
@Real1yfer3 жыл бұрын
But other people can he didn’t fix his because it was glued together
@millermatic140 Жыл бұрын
Replacing it is fixing the problem
@Tj-jf9tb4 жыл бұрын
This just happen to me on a delivery ugh. That god for this video. Im doing this when i get home.
@lindabutler-wy4ju11 ай бұрын
Holding you get the broken key out of the ignition?
@wmkennard Жыл бұрын
Did you make how to program it? And ty for the info how to do that.
@skeetbeat4867 Жыл бұрын
Would a lose key like that cause the car hesitant to start?
@willfreethemfreethem7671 Жыл бұрын
Link for new housing?
@willprc49035 жыл бұрын
No bull just the facts. THANK YOU!!!
@blessed28782 жыл бұрын
Not understanding why have to get locksmith to cut key
@i_liek_bois3 жыл бұрын
what a disgrace. Whoever designed this key should be flayed alive and left to be eaten by ants. And I mean that.
@Ashleyyy4445 жыл бұрын
Why can’t I use the same key instead of getting a new one cut?
@CtrlAltDefeatTV5 жыл бұрын
the key blade is molded into the plastic housing. I suppose you could cut the new key blade out and put the old blade in it's place and glue everything back together. But it was easier for me to get the new blade cut
@santtyrosales15794 жыл бұрын
Did you have to cut it or you used the old one and glued it like they said?
@khainoi272 жыл бұрын
So every key have a chip right?
@joogledlay12254 жыл бұрын
Hi, please put a link to that same replacement as not all of the ones on eBay show both sides and I want it to have the Honda logo.
@SP-ig3vs4 ай бұрын
Exactly!
@Skimpy333 жыл бұрын
My 08 Accord oem key internals are different. The key doesn't have that big of an anchor at the end. Also, the chip is integrated on to the button motherboard
@clinteastwood6663 жыл бұрын
You can also use a piece of paper fold insert so doesnt move
@douglasburskey48204 жыл бұрын
My 2008 Civic was made a little different . The imobilizer was on the keyless entry module
@MrAlgorhythm4 жыл бұрын
I think my 08 Civic EX is the same way. I could not find an immobilizer chip glued or affixed to the plastic housing. I think my chip is somewhere inside the fab itself.
@robertmarlow59142 жыл бұрын
What to do if I lost the guts?
@waqarali2591 Жыл бұрын
Can you please share the contact of your locksmith
@virginiaoliva86553 жыл бұрын
That piece of shit fob broke only I found the shell nothing to work with! Then the replacement key was also missing the fob! So I tried to turn car on and wouldn’t stay on!!!! So upset!
@JoshuaRodriguez-v4j8 ай бұрын
U dont even need to cut a new key. Just throw the old key into a new shell
@j3rzyboy2 жыл бұрын
Does this work for a 2012 Acura TSX flip key?
@kimd887311 ай бұрын
Total fail - why didn't u take the chip out on camera? 😭
@valerielozano88324 жыл бұрын
Hi I know u mentioned merrits / ace hardware which I know one in la Puente CA do u happen to live in that area to maybe give me the number to your lock smith guy??
@pnweezy2 жыл бұрын
It's a shame. Honda should have replaced these for free. Dumb engineering SMH
@Bryan-ws1sj5 жыл бұрын
What if I don’t have the chip nor the case just the cut out of the key ? Can I still get one online and just get a cut out ?
@CtrlAltDefeatTV5 жыл бұрын
If you only have the key blade, you can get a replacement key online and get it cut to work. BUT, without a chip to transfer into the new shell your car won't start. There are devices you can buy online to program the car to accept the new chip in the key you buy, but it's kind of pricey and a bit of a job to program it.
@Bryan-ws1sj5 жыл бұрын
CtrlAltDefeatTV any links to where I can get the thing to program it ?
@CtrlAltDefeatTV5 жыл бұрын
@@Bryan-ws1sj www.banggood.com/CK-100-Auto-Car-Key-Programmer-V99_99-CK100-SBB-Key-Programmer-p-1192150.html?KZbin&cur_warehouse=USA That's where I got mine, but if you google search "CK-100" you can find a few other places to buy it online.
@JusCo884 жыл бұрын
I dont have a chip beside the immobilizer jus shell and mobilizer will it still crank my car as of now im only getting the green key flashing 04 honda accord. i dont believe i have the master key
@georgekerns66544 жыл бұрын
kzbin.info/www/bejne/sGfUkJJun7SEhpI
@Samanthaperez-o9u8 ай бұрын
If my chip is working do i need to reprogram it once i switch to a new fob ?
@altonrowell81373 жыл бұрын
Thanks man.
@dcsmotorbike34392 жыл бұрын
I found a free ‘07 accord been sitting a year “tranny problem “. Ok No start Put jumper to battery and alarm goes off Tested battery good And now the key fell apart 🤔
@SHUBHAM-cz6tq2 жыл бұрын
thnxx broo it works
@sapounngin22374 жыл бұрын
Why everybody alway bring to locksmiths why not Honda dealer. $10 to have it cut at Honda dealer at my area.
@CtrlAltDefeatTV4 жыл бұрын
Some dealerships are different, sounds like yours is pretty understanding. Some dealerships won't even cut keys that they didn't directly sell to you.
@sapounngin22374 жыл бұрын
You are correct. I have 3 Honda dealer at my area. They are charge different price.
@jessea.castillo68623 жыл бұрын
Sapiens Where are you located? Honda Dealer Address please
@cassiecollins6634 жыл бұрын
Any guys want to help me out with this?
@mb16364 жыл бұрын
Nice ! What eBay link for the uncut shell ?
@leor.salazar45213 жыл бұрын
Yes, ditto again!
@sydneyballard99183 жыл бұрын
You can just screw in your old key lol No need to cute that one
@bright.light.sights9332 жыл бұрын
How?
@bright.light.sights9332 жыл бұрын
It's mounted in the plastic. You unscrew the key and it stays in the plastic piece.
@cantire1234 Жыл бұрын
His plastic is broken though. Like, it looks like plastic is supposed to go around the key. If you look you can see a bit of the plastic. My sister's key is like this,plastic holding the key is damaged. It looks like some replacements on EBAY/Amazon have the key blade mounted in that can't be removed (ie no screw on the key part). Even if I got her an OEM key I don't think the old blade will mount on because don't have that plastic surround for the key.
@thurm1015 жыл бұрын
??? Fix
@ericwilson4901 Жыл бұрын
Did not you think if you had problems getting out the security chip other people would too? But you decided to take yours out off the camera. 😂😂 What a useless video!!