How to get Can Am Engine Codes

[@proffesionalgamingcars6992]

great job,chears from Romania

[@Broknex]

Thank you very much! Cheers from Alaska!

[@simonbanderas3806]

Thanks my friend, not many videos out there.

[@ScottsJourneys]

Very helpful tutorial. Thanks Broknex.

[@DanielPerez-dg4xp]

I burnt the belt of a can am outlander and it went in to limp home mode . Do you guy know how I can fix that issue ? Thanks 👍

[@karimfichtali]

did you figure out how to repair the p0705 ? I have the same thing. I've tried to clean the 4 wires and the speedsensor but I still have the code

[@Broknex]

I had to readjust the shifter linkage to get the code to go away.

[@SenjaAldee]

great upload my friend and have a great day

[@craigbenjamin6320]

Hello was wondering if you could help my power steering won’t work I have no codes could you tell me what checks I should do please just had a rebuild also or do you have a video of the power steering explains more about it ? Cheers

[@Broknex]

Please don't be offended by this question, but have you gone through the settings on the main screen? There are three settings and the lowest setting feels like it isn't working... I actually know very little about the Can-Am power steering system. It is electrical, and haven't heard of many having problems with it. Being an electric motor, I would make sure the electrical connections are all good. It is run by the main computer that runs everything else, so without a code, it could simply be a bad power steering unit. I know they are replaceable, but not sure if they are repairable. Knowing how buried these units are on the machine, I would REPLACE instead of trying to fix it if that's the problem.

[@craigbenjamin6320]

It’s ok I’m new to can am to be fair an not I didn’t know there were 3 settings could you explain how I do this an I shall check all the connections also thanks for your time

[@craigbenjamin6320]

Iv just pressed the override button an hold nothing comes up keeps showing park brake been told this might be early stages of the display screen going also it’s a 2010 xxc renegade

[@TheSoldierFamilyNetwork]

thabk you for such an easy tutorial to follow

[@Broknex]

You're very welcome!

[@JohnAmes]

Some great information my friend 👍

[@Broknex]

Thanks 👍

[@claytonbennett7797]

On my 2017 Outlander 450, I cannot get the code to show up using your method. Any ideas?

[@Broknex]

I'm not sure on your Gen 2 machine.

[@gazbaxter1]

@claytonbennett7797 did you manage to find out. I also have a 2017 gen 2 and can’t get codes up

[@GunnyE9]

Good Stuff Maynard .....

[@terrychu5512]

Great tip, you ever find the problem? I have the same code

[@Broknex]

Mine was the simply adjusting the shift linkage properly.

[@slidenyo]

Works on 500 outlander too thanks

[@Broknex]

Very cool! Didn't know that!👍

[@bababibi8301]

Hello im french , its possible you give me a traduction please? Thanks 😉

[@mvff1984]

What about clearing the maintenance requirements message

[@Broknex]

I have never found a work around for that one. On the Gen 1 can am's you have to have their machine to clear them.

[@rogeralvarado6060]

A 2007 renegade 800. Does anybody know what code e h 8 1h47 is

[@G4biker]

Is it work with G1 model?

[@Broknex]

Yes. With the Gen 1 machines

[@G4biker]

@@Broknex thank you! I do this

[@normsatv]

Cool

[@atvdudes]

👍👍

[@lionel6136]

What to do if the limp home mode is on and there is no code?

[@Broknex]

Lionel very strange! Might be a problem with the brain. I have no idea! I’m sorry 😐

[@PistNbroke]

Limp home mode... still faster then a built Arctic Cat. Lol. Cheers guys!

[@Broknex]

LOL Truth!!! At least I didn't have to get towed home by an Arctic Cat! ;)

[@luxurysneakersita5539]

Big up

[@Broknex]

Thank you!👍